BP exchange from CRM to R/3..error

Hi CRMexperts,
I have created a Business Partner of role Sold-To in CRM and expecting its replication in R/3.  However, I got the below error in the BDOC.  Can anybody help me please!
Could not determine module name: BUPA_MAIN GENKEY: REP_GET_RECIPIENT
Regards
Gopal

Hi Gopala,
As far my knowledge goes, you must check in 2 different areas to troubleshoot the issue reported.
1. Go to the transaction SMOEAC. Select 'Site' as 'OLTP'. Open the subscription 'All Business Partners (MESG) subscription' under OLTP. Make sure the replication object 'BUPA_MAIN' is assigned under the 'Replication Objects' tab. Also make sure the publication name 'All Business Partners (MESG) subscription' is assigned under 'Publications' tab. In both the above tabs the 'Active' field must be marked as 'X'
2. Go to the transaction 'R3AC1' Select and open the object 'BUPA_MAIN'. Make sure  the linked BDoc 'BUPA_MAIN' is assigned. Also the appropriate 'Mapping module for load to R/3' is assigned
If not please let me know, so that we can debug in a different way
Reward if helps
Regards,
Paul Kondaveeti

Similar Messages

  • Data exchange from CRM to SAP BI 7.0 using eSOA

    Hi Experts,
                    How to build data exchange between CRM and SAP BI system using eSOA method. Since i am into BI and new to eSOA a step by step procedure or document for the above will be a great help.
    Thanks in advance
    Shiva

    Hi Shiva,
    In general you can use following options for data exchange between CRM an BW based on SOA technology:
    Transferring Data Using Web Services:
    [http://help.sap.com/saphelp_NW70EHP1/helpdata/en/43/f234633ffe025be10000000a1553f7/content.htm|http://help.sap.com/saphelp_NW70EHP1/helpdata/en/43/f234633ffe025be10000000a1553f7/content.htm]
    BR
    m./

  • Service order replication from CRM to R/3- Error confirmation status

    Hi,
    We are trying to replicate a service order created in CRM 5.0 to R/3 ,
    the service order is saved without any errors both the item and transaction have status released but when we try to create a service confirmation as followup it shows a message "Service process 8000000023 cannot be confirmed due to its status"
    and on checking in txn:SMW01 it shows status as "sent to recievers" and a message "R/3 adapter called"
    Please can you tell me regarding the status that is to be maintained for successfull upload of service orders to R/3.
    Regards
    Prathiba

    Hi Pepe,
    Thank you for your quick reply.
    The status of the item shows "To be distributed" when i try making changes it shows a message
    "Document being distributed changes cannot be made"
    How to rectify this problem?
    Regards
    Prathiba

  • Meet a problem of data exchange for sale order from CRM to R3.

    Dear Friends:
          I do the data exchange for sale oder from to R3 today , the problem's detail is as follows:
          When i save a sale order in CRM (Version is 5.0) . it can automatically generate a bdoc which bdoc type is BUS_TRANS_MSG. but the bdoc status alway is "Sent to receivers (not all have confirmed)". and the original order in CRM can not be change .it quote that "Document is being distributed - changes are not possible",  so i check the order status analysis in detail .it presents two error messages ," Event 'BEFORE_CHANGE', attribute '     FINI': Error code for function module 'CRM_STATUS_BEFORE_COMPLETED_EC' , "Item is not yet completed in OLTP system".  so i check  the order in R/3 ,it has already been create and without any error messages.
       Would like to tell me how to solve it . thanks your any idear..

    Hi Benjamin,
    When performing uploads to R/3 from CRM there is a response from the OTLP system that is sent back to the CRM Middleware to confirm that the data records were received and processed correctly. 
    Here is a checklist you can run through to verfiy that the connections, systems and objects that are needed are all in place:
    <b>On R/3 system:</b>
    - Check R/3 outbound queue (transaction SMQ1) for any entries that are not reaching CRM.
    - Check that all RFC destinations on R/3 are defined correctly and are pointing to CRM
    - Check the CRMCONSUM table in R/3 to ensure CRM is registered as a consumer
    - Check the CRMRFCPAR table in R/3 to ensure that order objects are valid for exchange between R/3 and CRM
    - Check for any short dumps in R/3 (ST22/ST21)
    <b>On CRM:</b>
    - Are there entries stuck in the inbound queue (SMQ2) with R3AU* names?
    - What does the CRM Middleware Trace show (SMWT)?  Sometimes this has more detail than the specific BDoc overview (SMW01)
    - Check for short dums in CRM (ST22)
    Let us know what else you uncover and we can work from there.
    Brad

  • Can a IDOC be used for data exchange from R/3 to CRM

    Hi All,
    First, can a IDOC be used for data exchange from R/3 to CRM
    I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
    To achive this can I use IDOC?
    Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
    Please respond immediately.
    Regards,
    Gopinath

    IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
    Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
    Hope this helps,
    Kai

  • Error while creating ERP Quotation from CRM Opportunity in CRM WebUI

    Dear all,
    We have implemented Best Practise Scenarios but have a problem in the following: C63-Opportunity Management-Creating ERP quotation from opportunity
    I have maintained all necessary customising mentioned in Best practises documnet and could select a quotation(AG) as follow on transaction from Opportunity, but get an error message " Material 23 is not defined for sales org.1000, distr.chan.10, language ENu201D in the ERP quotation screen even though material 23 is created in ERP for Sales Org 1000 & DC 10. I have downloaded the material from ECC and it is available in CRM also.
    The weird thing , when the error message pops up in the ERP quotation screen if I delete the material and enter the same material, I get no error.
    If I have 3 materials in opportunity then the error message is there for all the 3 materials when I create an ERP Quotation & after deleting all the 3 & reentering I get no error and am able to save ERP order.
    We have CRM 2007 connected to ECC 6.0
    Please help resolve the above error.
    Thanks
    Teyna

    hi,
    have you created org from middleware thorugh r/3. Is your hierarchy and category same as that mentioned in best practice documents?
    Regards
    Pankaj kumar

  • BP replication from CRM to R3 Error

    Hi All,
    We are working on CRM 4.0 Unicode version.  The details of the system are as follows
    SAP_BASIS     620          0056     SAPKB62056
    SAP_ABA     620          0056     SAPKA62056
    BBPCRM          400     0009          SAPKU40009
    PI_BASIS          2005_1_620     0005     SAPKIPYJ55
    We are working with R/3 4.7 Non Unicode version the details of which are as follows
    SAP_BASIS     620          0056     SAPKB62056
    SAP_ABA     620          0056     SAPKA62056
    SAP_APPL     470          0021     SAPKH47021
    SAP_HR          470          0030     SAPKE47030
    ABA_PLUS     100          0009     SAPKGPBA09
    EA-IPPE          200          0013     SAPKGPIB13
    PI          2004_1_470     0001     SAPKIPZI51
    PI_BASIS          2005_1_620     0005     SAPKIPYJ55
    EA-APPL          200          0007     SAPKGPAB07
    EA-DFPS          200          0007     SAPKGPDB07
    EA-FINSERV     200          0007     SAPKGPFB07
    EA-GLTRADE     200          0007     SAPKGPGB07
    EA-HR          200          0011     SAPKGPHB11
    EA-PS          200          0007     SAPKGPPB07
    EA-RETAIL     200          0007     SAPKGPRB07
    BP-R3PF          470V2          0000     -
    ST-A/PI          01F_R3_470     0000     -
    ST-PI          003C_620     0000     -
    I ] Problem
    We are having problem while replicating the Business Partners from CRM to R3. When we create a Business Partner ( Type People) through transaction BP on the CRM server it creates an entry in table but000 on the CRM side but the same entry does not exist in kna1 table on R/3 server.
    When we check the BDOC through transaction smw01 on the CRM server there exist an entry with BDOC State Description " Send to receivers (not all have confirmed)" for BDOC Type BUPA_MAIN.
    II ] Configurations
    We have done following settings before creating Business Partners through CRM
    Settings on CRM Server
    1> RFC Destination "CARDONR3_DEV" for R3 server is defined in sm59 on the CRM side and is working OK.
    2> Through transaction BUCF we have defined a number range named C1 ( 0005000000 to 0005999999) with External flag deselected.
    3> Through SPRO we have defined a grouring C001 (CRM Customer) and assigned number range C1 to it.
    Settings on the R3 server
    1> RFC Destination "CMDCLNT110" for CRM server is defined in sm59 on the R3 side and is working OK.
    2> Through transaction OVZC we have defined cutomer number range named C1 ( 0005000000 to 0005999999) with External flag selected.
    3> Through transaction OVT0 we have created Cutomer Account Group named Z001 which is copy of 0001 (Sold to Party). Number range C1 is assigned to the account group Z001.
    4> Through transaction VOPA we have maintained the Partner function for customer master i.e Acct Grp Z001 is assigned to Function SP.
    5> In transaction PIDE under CRM -> R3 assignment we have selected account group Z001 to Classification type B (i.e Customer)
    III ] Procedure Followed
    1>  On the CRM server we execute the transaction "BP" .
    2>  We Click on Create Person button.
    3> Following Selections are made
         a) Create in role : Sold-To-Party
         b) Grouping : CRM Customer
         c) Field Title, First name and Last name are selected
         d) In the tab Classification we select R/3 Account Group as "0001". System does not allow us to select the R/3 Account group "Z001"
    4> On Saving the entry Business Partner is created in table but000 on the CRM side.
    5> The above entry is not replicated in table kna1 on R3 side as expected.
    IV ] Observation
    We are not able to select account group "Z001" in the BP creation screen. When we run the Intial Load (R3AS) on CRM server for object "DNL_CUST_ACGRPB" (i.e AccountingGrp Business Partner) (Replication from R3 to CRM)  it shows the status done in screen R3AM1 but the entry for account grouip Z001 which is created manually on R3 side during the configuration phase is not replicated on the CRM side.
    We have referred a note for the above error which said that the basis patch "SAP_BASIS" should be at level 56 but we are already on Patch Level 56.
    Please guide us.
    Thanks & Regards,
    Yatin

    Hi Yatin,
    Glad to hear one of the problem has resolved.
    In order to simplify the analysis, I assume few things
    from your information :
    1. Connection between CRM and R/3 are correctly run
    2. Other necessary customizing Objects relate to BP
       have been downloaded properly to CRM.
    Few things you can check :
    1. Did you enter Correspondence Language & Language
       in CRM BP ? just make sure you did.
    2. Try to complete minimum data such as Search Term,
       Street/House, Postal Code / City and Country in CRM BP.
    3. Check the detail Error message in SMW01 (can you get
       more detail - normally you can click on SHOW BDOC Msg
       ERROR)
    You also can trace/debug LUW,:
    - use tcode SMQ1 to see the stopped queue for that error
      transfer
    - Click menu Go To -> QOUT Scheduler
      Click on R/3 destination and deactivate/deregister it
    - In SMQ1 select the error queue, double click on it.
       and after next screen double click again
    - Then Start DEBUG LUW
    - Insert debug breakpoint in statement Call Transaction
      and execute F8
    - When it stopped, Change the variable mode to A
      it will show you the missing/incomplete fields.
    You need to register/activate back the R/3 destination after you have finish debugging.
    Hope this helps, let me know the result
    Cheers,
    Gun.

  • Getting an error while creating a ERP Quotation from CRM Sales Web-UI.

    Hi Experts,
    I am getting an error while creating a ERP quotation from CRM Sales Web-UI. Here  I am enclosing the screen shot. Please give me the solution for this.Thank you in advance.
    Regards
    Kishor Kumar.

    Hi Kishore,
    Please refer to the link below -
    Entry of ERP Sales Documents in SAP CRM - Sales Quotation and Order Management - SAP Library
    Also, refer to the SAP note -
    1446253  - FAQ note: ERP documents in the CRM Web UI (lead-to-cash scenario)
    This note will give you the related topic and the configuration required through SAP help links.
    Hope this will be useful.
    Thanks and Regards
    DJ

  • Error during Replication of Service Contracts from CRM to ECC

    Hi,
    I'm encountering a problem when replicating a Service Contract from CRM (I'm using SAP CRM 2007) to ECC.
    I insert a first Item which is not relevant for pricing (let say, product 123)
    I Insert a second Item relevant for pricing, with reference to the previous one (let say, product 456)
    I release the Items and I save the contract
    When I try to go in edit mode in the Contract, an error appears:
    An error has occured in the system DE1CLNT200 while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
    Transmission log
    u2022     SALES_HEADER_IN has been processed successfully (Notification S V4 233)
    u2022     Material 0 does not exist in plant ZX01 / country CH (Notification E V1 391)
    u2022     Error in SALES_ITEM_IN 000101 (Notification E V4 248)
    u2022     Sales document  was not changed (Notification E V4 219)
    It seems that the program does not recognize the product (the error message says "Material 0", not "Material 456") ...
    Any idea?
    Thanks in advance,
    Andrea

    Should it be a problem related to the leading zeros?

  • Error while copying from crm to R/3

    Hi,
    An error has occured while coping an installation order from crm to R/3. Any suggestions mates.
    Error message is:An error has occured in the system R3PCLNT501 while copying the document
    Regards,
    Jan.

    Hello,
    You have to look at the queue to find out what is the specific error.
    Please use SMQ1 transaction to have a look at your queue
    Thanks,
    Sandeep

  • Error while extracting data from CRM

    Dear all,
    I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
    When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
    Kindly suggest what can be the problem.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Thanks all in advance.
    Regards
    Adhira Anand

    Hi Meyappan,
    I have checked SM37, SM21 and ST22. There are no errors.
    in SM37 the below log is displayed.
    Job started
    Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = ZCRM_SRV_DEFECT
    RLOGSYS    = CLNT645BIP
    REQUNR     = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
    UPDMODE    = D
    LANGUAGES  = *
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000000000                              *
    abap/heap_area_total.......... 2000000000                              *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500000                                 *
    ztta/roll_extension........... 2000000000                              *
    1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
    IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
    Synchronized transmission of info IDoc 3 (0 parallel tasks)
    IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
    IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
    Job finished

  • IDoc for BP migration is in error on transferring from CRM 4.0 to 7.0

    Hi,
    We have a requirement to migrate Business Partners from CRM 4.0 to CRM 7.0. We are using the message type CRMXIF_PARTNER_SAVE_M for this purpose. The IDocs are generated correctly from CRM 4.0 and carry the correct data. The status of Idoc in CRM 4.0 is set to 03.
    However, on checking in CRM 7.0 system, we found the IDocs to be in error with a status of 51. The IDocs fail validation on the Birthdate field - where first 3 digits are replaced by spaces.
    Any suggestions on how to correct the birthdate field? There are no changes being done to the data during mapping on either the inbound or outbound site.
    Regards,
    Mugdha

    Hello,
    note 915509 (needs to be implemented manually) should solve this issue.
    Best regards,
    Christian

  • CRM Upgrade from 7.0 to EhP1 Error - The requested resource does not exist

    Hello All,
    We have recently upgrade our pilot system in CRM from CRM 7.0 to Ehp1. The upgrade was successful.
    However, when I login into the WebUI, I get an error message as follows:
    404 Not Found
    The requested resource does not exist
    Details: Go to main page of this application
    I got in touch with the Basis team and tried to activate some services through SICF that were deactivated because of the upgrade. But we still encounter the above error everytime I tried logging into WebUI.
    I kindly request to provide some pointers towards the resolution of the same.
    Thanks and regards,
    VSK.

    Hi,
    please try to activate all SICF services under sap->bc->bsp.
    If needed deactivate them and activate afterwards again to be sure all services are active.
    Good luck
    Kind regards
    Manfred

  • Error in invoice posting from CRM to ECC

    Dear Guru's ,
    when we release the billing document from CRM to ECC , system throughs error messages and while we checking the confimation the below  green message is appering .
    --> Object link not known in CO
    Whatever the master data  we maintained in the order and confimation is perfect .Kindly advise why this green error is coming???
    Regards ,
    Pakalapati

    solved by my self

  • Errors in PHASE DIFFEX phase during the CRM 6.0 upg from CRM 5.0

    Hello,
    I am in the process of upgading our CRM systems from CRM 5.0 version to
    CRM 6.0 and having issues at the PHASE DIFFEXPADDE during the upgrade
    right after the DB_ACTION_LOWQ1 phase and ADJUSTCHK being the previous
    phase.
    We are currently at CRM 5.0 dual stack system on Linux X86_64 SLES9 and
    DB - Oracle 10.2.0.2.
    I was able to finish the PREPARE phases on both ABAP & JAVA stacks
    successfully.
    The phase DIFFEXPADDE is failing with a error message in the
    DIFFEXPA.ELG which I have mentioned below. I am also attching few other
    related logs for your reference in the attached zip file
    (DIFFEXPA_logs.rar)
    DIFFEXPA.LOG
    UpgDialog.log
    SAPECCI700.C15
    TP00.ECO
    SAPup.log
    "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI700.<SID>
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW190 "INDX" "WFMFC_INDTOR_GRP 01 " has no active
    version.
    Long text:
    Cause
    You have tried to export a Dictionary object that has no active
    version. The reason for this probably is that the author of the DD object has forgotten to activate it.
    System Response
    The transport request is not released.
    What to do
    Activate the Dictionary object and repeat the export.
    2EETP200 Export with errors, request will not be imported
    Long text:
    Cause
    The export was finished with errors or terminated (return code >=
    8).
    System Response
    The request is not imported. Instead it is set back to "can be
    changed"
    in the source system.
    What to do
    The export log contains remarks concerning the reason for the
    incorrect
    export. Correct the error and repeat the export.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI701.C15
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI702.C15
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    I am stuck at this step and unable to move forward until I get past
    this error. Please let me know how do I proceed and if you have any
    more questions.
    Would appreciate your early help!
    Thanks in advance!

    I was able to get past this issue by logging in to the client 000 and
    activate the object WFMFC_INDTOR_GRP from transaction SE11.
    Dictionary Object --> Activate from the menu bar. Gave me few warnings
    but did not error out.
    Hence went past the phase and the upgrade is progressing as of now.
    However, can you please confirm if this is a correct fix or do you want
    me to do anything different since I have not reached the MODPROF_TRANS
    phase yet.
    Thanks

Maybe you are looking for