BP Fact Sheet adding Multiple BI views using SAP configuration tool

Hi,
I am able to add multiple BI reports to the Fact Sheet using SAP standard Configuration. But all the views appear with the Same Heading "BI Report". Is there a way I can change the title "BI Report"  to something more specific to the Report context using SAP Standard Configuration or a BADI.
E.g. Sales Data Report / Volume Analysis
instead of BI Report / BI Report
I am able to do so by creating my own BI inbound plugs for the interface definition in the component BP_FACTSHEET but I do not want to use that approach if their is a SAP standard way of doing it.
Any advice will be greatly appreciated.
Sumeet

Hi Sumeet,
                 If you want to change the title of the view then you have to go particular component and view .Then redefine  this method IF_BSP_WD_HISTORY_STATE_DESCR~GET_STATE_DESCRIPTION  and give ur title in description variable.Or you can go to this component BSP_DLC_FS and change the title when you assign the view in particular tiles.
Thanks
Vishwas Sahu

Similar Messages

  • Fact Sheet in CIC0 - Display Issue

    All
    Hope you can help.  I am in the process of tidying up the roles & profiles through the users on our CRM system.
    We have a small number of users that use the FACT SHEET within trnsx CIC0, they used to have SAP_ALL assigned to them which I have now removed, this now has removed the Marketing Attributes section from view from the FACT SHEET
    I have ran AUTH Checks to assist and added where applicable - does anyone know why this area is not being displayed
    any help would be appreciated.
    regards
    Barry

    Bruno
    Thanks for replying.  I have ran \nsu53 to do the auth check and added objects as needed but still no display.
    However - during replying to your message I went back into BP to modify the Marketing Attributes of a customer and received 'You are not authoriesed' - this required object C_TCLA_BKA, after adding this I could now see the Marketing Attributes in the FACT SHEET
    so thanks
    Regards
    Barry

  • Service Orders ,Complaints,Sales Orders,Service Requests, data in Accoun fact sheet screen?

    Hi Team,
    Account related data is not populated in the service order data view and sales order data view and service request view in the account fact sheet screeen?
    We are using account factsheet BP_ACCOUNT_FS...In this account sheet,data is not populated .Service order assignment blocks is not populated..
    Thanks
    Kalpana

    Hi Arden,
    Thanks For your reply.
    They are maintainig the account fact sheet ZCC_FS_ACT in work center ,PFCG role id - SAP_CRM_UIU_IC_AGENT ,.Now account fact sheet is avialbe in work center of icagent.Now if we open any account- then click account fact sheet there is no data is not displayed in assignment blocks of service orders,service sales and ibase all....
    Data is not populating in accoutn fact sheet..,..if  you possible tell me steps and how to do it.?and if you share any information its great and help ful for me?
    Thanks
    kalpana

  • New Info Block in BP Fact Sheet

    Hi Experts,
    How i can add new Info Block to Business Partner Fact Sheet (BP_FACTSHEET) with other class and all data.
    I will write some ABAP program with data but how i can assing it to new info block?
    Any ideas?
    Thanks to all

    Hi,
    Create the fact sheet views that you want to include in the component workbench.
    Under UI framework def>factsheet> assign these views to a fact sheet.
    Then these views are then displayed in Available Fact Sheet Views in the fact sheet configuration using bsp_dlc_fs component within the component workbench.
    Select the created view as one of the tile in factsheet.
    Hope this helps
    Srinivas

  • ID: How to use the test Configuration tool

    Hi all,
           I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
          By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
    I have given the input parameters what it has asked.
    Header details:-
    sender service,sender message interface and namespace.
    payload:-
    xml format( taken from message mapping)
    log result:-
    Sender Agreement
    Internal Error
    HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
    Please help me how to work with this tool.
    Regards,
    Deviprasad.

    hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
    i think it means...its trying to make a connection :  HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
    if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
    pls rectify me and convey me if u get the proper answer....or if i m wrong..
    pls try to do use the test after login to IB through a user with maximum authorization....

  • Testing SAP HCM application using SAP TAO

    I have the following questions regarding SAP HCM testing.
    1)  Do we use any third-party i.e, HP's Quality Center, QTP tools to test SAP HCM applicationa?
    2) Do any one  tested SAP HCM using SAP TAO tool? 
    I am new to SAP HCM testing, appreciate if someone can send some documents related to testing using SAP TAO and other third-party tools.

    Basuvarma:
    I understand that we use Quality Center to maintain the test cases. I want to know if you can provid me any documents related to SAP HCM testing using QC or Rations tools....
    Appreciate your response.

  • View in Fact Sheet not showing information

    When a user displays an IS-U customer information using transaction code CIC0, only the Business Partner information is populated with details.  The custom view that we created under Fact Sheet doesnt show anything. 
    Where do you fix this issue?  I checked the security roles assigned and everyone in their team have the same security roles so Im wondering why this particular user cannot display the customer information in the Fact Sheet View.

    When a user displays an IS-U customer information using transaction code CIC0, only the Business Partner information is populated with details.  The custom view that we created under Fact Sheet doesnt show anything. 
    Where do you fix this issue?  I checked the security roles assigned and everyone in their team have the same security roles so Im wondering why this particular user cannot display the customer information in the Fact Sheet View.

  • Using fact sheet 'BP_ACCOUNT_FS' in IC business roles

    Hi experts!
    I have a requirement to customize the fact sheet in IC business role, where the 'ICCMP_AFS' fact sheet always opens. But I need all the assignment blocks and information that is in 'BP_ACCOUNT_FS' fact sheet.
    So, is there any way to make that in IC Business Roles there was fact sheet 'BP_ACCOUNT_FS' but not 'ICCMP_AFS'?
    This question is extremely important for me.
    Thanks in advance,
    Andrew.

    Hi, Chimalwar!
    What I've done:
    1. Defined logical link 'ZIC_AFS' in transaction CRMC_UI_NBLINKS, by copiyng it from standard 'IC_AFS'. I only changed the parameter and put it 'BP_ACCOUNT_FS'.
    2. Define Profile (choosed the profile I need) -> Define Generic OP Mapping
    Choosed my navigation bar profile and made the following customizing:
    Object type: FACTSHEET
    Obj.Action: B Display
    Use target: nothing checked
    Target Id: nothing selected
    Use Link: checked
    LogLink ID: ZIC_AFS
    3. Transaction 'BSP_WD_CMPWB', Component: BSP_DLC_FS -> Component structure browser -> Views -> BSP_DLC_FS/factsheet. I've created my own configuration, copying it from standard 'BP_ACCOUNT_FS':
    Config key: my own, for my business role
    Component usage: <DEFAULT>
    Object Type: 'BP_ACCOUNT_FS'
    Object Subtype: <DEFAULT>
    After confirming Business Partner I can see the fact sheet I defined.
    But my task was to see the fact sheet of the business partner when I select it in a call list, before I confirm it. And there was ABAP.
    Regards,
    Andrew.

  • In Fact Sheet, Open Leads View is displaying all Leads

    Hi Gurus,
    I have configured Account Fact Sheet(BP_Account_FS).
    I have added view "Open Leads", which should "display the last n leads that have status "open" or "in process".
    But In my case "Open Leads" is displaying all the Leads, which have status "Converted" & "Rejected" also.
    Anyone has come across with this. What are your suggestions?
    Thanks & Regards
    Rohan

    Hi,
    Raised an OSS, there was a programming error, so a new SAP Note has created SAP Note No. 1319703.
    Thanks & Regards
    Rohan

  • Using Calendar Overlays on a Multiple Calendar Views

    I have created a calendar with 9 categories.  I then created 9 overlays to color-code each category.
     This works perfect as long as I am in the default “Calendar” view. 
    I also have multiple views (up to 24) and a column for the user to select the view(s) to which the calendar event should be added. 
    For example, there is a view for each Division and Branch. 
    The user may want the Branch event to also be available in the Division view, so they would select their division and branch from a choice column (check boxes) and the column would contain both values. 
    The individual views would check to see if the column “contains” the value (division or branch) for that view.
    This works fine when viewing in the default “Calendar” view but if I create another view then it is no longer color-coded and my requirement is that every calendar view (all 24) are color-coded. 
    If I add color coding to one of the other views using overlays, then both the default “Calendar” view and the newly-created view show up on the calendar. 
    The newly-created view is still only one color but the default “Calendar” view is color-coded and also displayed along with the newly-created view.
    So it looks like there is no way to add a color overlay to a view unless it is the default “Calendar” view.
     I am trying to avoid building 24 separate calendars and possibly up to 40 workflows to move events between calendars.
     Any help would be greatly appreciated.

    Robin,
    Thanks for the info.  I have attached some jpegs to hopefully make my issue clearer.  I'm not clear why you don't want your views to return any data.  Seems like it defeats the point of a view? I did as you suggested and added an extra filter
    to each view "And Title = x".  What this did was remove the duplicate non-color-coded records which are currently in the images (all green).
    So I have no overlays for the "Calendar" view and created overlays for the SNA and SNAG views.
    Here is the result of the SNA View.  The events in green disappeared once I added "And Title = x" to this view.  As you can see, all the data from the SNA
    AND SNAG views are displayed. 
    Here is the SNAG View. Again, the events in green have since been removed by adding "And Title = x" to this view. 
    The forum only allows me to upload two images so I will make a separate post for the final image.
    Ken

  • Multiple Fact sheets issue  for Account

    Hi All,
    Need help to trigger the multiple fact sheets. SAP has given one SAP note "2104590 - Use of multiple PDF factsheets in account overview page".
    I have implemented that note  and entered Custom Class and Z smartform in the configuration .
    SM30->CRMV_PRN_CONTROL
    SM34->CRMVC_BUIL_PRT
    I am able to see the  buttons in account overview , but those are not triggering .
    Could you please help  me  in this issue.
    regards,rama

    You can use different AppleIDs for different purposes on one device. It is a matter of setting the desired ID for the fucntion (iCloud vs. itunes and Apps stores, for example), in the settings app. My wife has that configuration on her iPhone. She has her own AppleID set up for iCloud (for synching with Contacts and handling back ups, for example), but uses mine for itunes and app store access (I already have a number of apps since I have been using iOS devices foer a while, plus I have iTunes Match).
    The IDs are NOT tied to each other, however. There is no way to do that.

  • Adding Multiple excel sheets

    Hi Experts,
    How i want to add multiple excel sheet in Xcelsius using liveoffice in single canvas.Hope i will expect good from you
    Regards,
    surigs

    Hi Surigs,
    Could you clarify what exactly you need? Do you mean adding multiple sheet? If yes, you can insert multiple sheet in the excel and add live office document.
    Thanks,
    Amit

  • CRM IC win (customizing view/fact sheet)

    Hi,
    I dont understand how to change the display of a info block into view
    Where i could change the display of a block?
    For exemple:
    if i add the block "Address" : Class "CL_CRM_CCKPT_IO_ADDRESS"
    Regards
    Julien

    Hi Julien
    I am offline to a CRM system right now, so I can't give you a cut'n'paste solution. I don't think they are good anyway.
    What you have to do is create your own info block class and then use configuration to include that in the Fact Sheet.
    Copy class CL_CRM_CCKPT_IO_ADDRESS to Z_CL_CRM_CCKPT_IO_ADDRESS (or some other Z name). Use SE24 or SE80.
    You can see that this class is a subclass, in the first screen. It has inherited particular methods from the superclass. It may also have a couple of it's own helper methods.
    I think one of them is called GET_REPORT or something like that. That's where each info block goes and gets all the data from this system or another and formats it into XML.
    The particular UI you are using then reformats that XML.
    Anyway, this is the method you need to adjust (as a minimum).
    The URL that you mention passes parameters into the info blocks. The first part of the code digs those parameters out.
    You can add your own BAPI calls or whatever here.
    Then you can fill the XML table with your own data. This is a bit tricky - it's hard to understand the way the XML table is built. It uses template files stored in tx SMW0.
    Once you have it compiling, configure it in to your fact sheet. I think you will have to add your new class to table CRM_CCKPT_CLASS - not sure if that is available via the IMG.
    You can build an info block with any data in it. I always find it easiest to find a similiar one in SE24 (by searching for CL_CRM_CCKPT_IO*) and copy that as a starting point.
    Good Luck.
    Dom

  • Status used in open and completed transactions in Fact Sheet

    Hi! I would like to confirm the logics used in the fact sheet to display open and completed transactions. I read on the help that for open (for example) transactions, system is using status 'open' and 'in process'. This seems to me like system status. However, when I ran the fact sheet, the control is more at the user status level. So, I need clarification on this. Also, where can I find the status and transaction logics used for the extraction of these transactions (e.g. what transaction types are used)? I could not find the codings in the method GET_REPORT under class CL_CRM_CCKPT_PROCESS_CLOSED for example. Perhaps I have looked in the wrong place?
    Appreciate any help on the above.
    Cheers!
    SF

    No response. Based on what is being debugged, all transactions are taken into account.

  • Fact Sheet Dump "FKK_CRM_GENERAL_INIT" does not exist - in BP View

    Hi all,
    We have CRM 2007 system and currently i am using Business Role SALE_UTIL.
    I have a problem with the Fact Sheet  in BP- Corporate Account.
    When i click on the Fact Sheet in BP i get the errors of FI-CA settings missing.
    and after click on back button i get dump "FKK_CRM_GENERAL_INIT" does not exist.
    I have looked in the SAP NOTE 746475 but its tells more about the RFC settings.
    My Question: Is there any way to set the default setting even if we dont connectivity to FI-CA system available. Are there any templete or so to upload so that i dont get this error.
    Btw. when i click on the PDF Fact Sheet in BP i get the Fact sheet with all the information regarding the BP.
    Its a bit urgent.Do you have any suggestions how to do it... ?
    Regards.

    Hi Usman,
    Please check the following notes:
    746475 Financial Customer Care - Collections Management
    921160 Function module "FKK_CRM_GENERAL_INIT" to be called
    1240600 FCC - Unnecessary FKK_CRM_GENERAL_INIT call
    I hope it helps.
    Regards,
    Gabriel Santana

Maybe you are looking for