BP from R3 to CRM - Sales Area not visible in CRM
Hi Forum,
I have done middleware setup for data replication between R3 --> CRM and its working fine.I can see the Customers in CRM that was created in R3 as Sold-to party(Iam downloading only Sold-to party).Iam encountering 2 problems :
1.Iam unable to see all the Sold-to Party from R3.Only few Sold-to party are visible, say out of 450 only 30 are visible in CRM.I have done initial load of Customer_Main and other customizing objects(Delta load is also working fine).
2.And Iam unable to see the Sales area of BP(have assigned Co.code and sales area to Sold-to Party in R3) in CRM.
Please Guide
Thanks in advance
Shridhar
Hi Matthew,
The 30 sold-to party that are coming from R3 have the No.30xxx as their id.But there are other sold-to party with the same No.i.e 30xxx.Other sold-to party have id 10xxx and 20xxx.
I have maintained the number range in CRM according to the number range for the account group 001(sold-to party in R3) as exterbal num range.Below I have shown the Num ranges in R3 and CRM
in CRM(Define Num Range)
No. From Num To Num Current Num
Y4 0000000301 0000000999 350
Z1 0000010000 0000039999 --
Define Groupings and Assign Number Ranges(CRM)
Grouping short name Desc Num rng
R001 R/3 Customer R/3 Customer Z1
Y004 Int.No. Org BP Int.No. Assgmnt Y4
in R3
A/c Grp Name Classification Group Ext
0001 Sold-to party B R001 X
Define Num Range in R3
Accnt grp Num rng Interval Num assgnmnt
0001 03 0000030001- Internal
0000039999
Message was edited by: Shridhar Deshpande
Similar Messages
-
ERP Sales Orders Types are not visible in CRM WebUI ! ! ! !
Hi All
I am working on CRM 7.0 IDES, I am trying to create an ERP sales order but when I chose create ERP sales order a popup menu with no document types so I am not able to chose the Sales order document type, the CRM and ERP are integrated and the ERP sales Profile is maintained and assigned is there more settings should be done to make them visible?
Regards
Jacopo FrancoiseHi Jacopo Francoise,
Check for the customization in Tr. SPRO path IMG-> CRM->Transactions->Settings for ERP Transactions maintained via CRM.
You should define the ERP sales order profile with your ECC system RFC details. Also read the documents available there.
Hope this will help.
Thanks,
Vikash. -
Cannot download books from iBooks. The books are not visible
Please help
Hi,
Can you access that URL when you paste it into your browser? You don't need to configure system global settings unless you want to go to PI's navigator automatically - you can always copy & paste the link after opening the wsnavigator in PI yourself as well. If you can access the link, kindly check your network & proxy setup.
Regards,
Gokhan -
Export To HTML Images are not visible
Hi All,
I have an VS 2003 application and Crystal Reports 10.
My windows services generates the Crystal Reports and export them to Disk. I my Web Application i have to list all the exported reports.
Everything works file but when i view HTML exported report from my .aspx page, images are not visible on the page.
Can anybody has the same issue?
Thanks in advanceDo you have crystalreportviewers10 directory ptoperly configued in your IIS?
-
Some Sales Orders are not replicating into CRM
Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
KenHello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit -
Delta changes in R/3 sales document are not coming into CRM
Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PKHi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna -
All the pricing conditions are not visible for a given sales area, material
Hello All,
There is a customized screen with sales area(Sales org, distribution channel and division), material and sold to party. There is buttton when we click it has to display the pricing conditions. The problem here is it is not displaying all the conditions some conditions like ZB02 and MWST are missing. The Function module used is PRICING.
Whereas in VA03 tranaction for a sales order created with this sales area, material it is showing all the conditions for a item.
Please help me to solve this issue.
Many Thanks,
RamaHi
The BP's created for one particular sales area are not getting replicated into CRM, though before sometime it was happening.
DJ>> Hope the required sales area is available in CRM.
The BP with the "general data", and "role of sold to party" only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales area in the ECC, do not flow to the CRM.
DJ>> Please check the following -
1. Create a BP in CRM (with the sold-to party role) with the required Sales area and see if this customer when replicated to ECC has the relevant Sales Area. Ideally it should get replicated if all you middleware settings are fine.
2. See you have not set a filter for a specific Sales Area and becuase of that BP is getting replicate but not the sales area.
Hope this will help
Regards -
Attributes are not saved in CRM using APD
Hello experts, I have trouble recording the attributes marketing from BW to CRM. APD use to record data, the log of APD ends in green but when I go to transaction BP in CRM data are not.
Anyone can help me, thanks!
Enrique.
Edited by: Enrique Busi on Jun 3, 2008 7:31 PMHello experts, I have trouble recording the attributes marketing from BW to CRM. APD use to record data, the log of APD ends in green but when I go to transaction BP in CRM data are not.
Anyone can help me, thanks!
Enrique.
Edited by: Enrique Busi on Jun 3, 2008 7:31 PM -
Product sales area data missing in crm
hi, expert
I'm currently having a problem with some of the products that are being replicated from R/3 to CRM.Product sales data initial synchronization is complete from ecc to r3,user create order is ok in crm.After a period of time,product sales area data missing in crm,we don't know when is lost,the problem is that we can't do an order for several products because there's no data in the sales and distribution tab(Sales Org., Distribution Channel) of the product master in CRM.Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM -
In the attached VI I don't understand why data from the inner case structures are not being transmitted to the array.
Thank you.
Solved!
Go to Solution.
Attachments:
TEMP.vi 25 KBIt took me some time to figure what you are trying to do but I think I have it now.
The SR is still required.
What is happening is your "Bundle By Name" is replacing all of the fields of the cluster, not just the value coming out of the case structure. So to maintain the cluster stuff you do in earlier iterations you can either...
1) Put the "Index array, Bundle by name, and Replace array" inside the case structure and ONLY bundle the value you are setting in that iteration. (as you will see Tim post shortly)
OR
2) Move the Index array before the Case, unbundle all of the fields and feed teh case structure and run them across the case so that ALL of your output tunnels come from the coresponding input tunnel EXCEPT for the filed you are trying to set.
Ben
Message Edited by Ben on 05-05-2010 01:31 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?
Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06 -
Material delta changes are not flowing into CRM
Dear All,
material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
Do I need to create the new product hierarchy also in CRM manually?
Appreciate any inputs
RajHi Raj,
Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
Then go to SMW01 and reprosess the struck Bdoc.
Reward points if helps,
Regards,
Paul Kondaveeti -
Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.
Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application -
The date update from TFS online are not visible on Project pro
Hi everyone,
I updated the start date and the finish date from TFS online, i saved and refresh the page. Then On the Project pro i clicked on refresh. The update are not visible on project pro.
I don't no why because when i change the title of the task from TFS online. the update is visble on Project pro.
Someone to help me??
Thanks for advance.
rexcsHi rexcs,
Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
In PC I have changed the default app location from (c:/users/username/My Music/iTunes) to other (d:iTunes) and copied the previous content to new location and changed the Default location in Edit preference. Now in iTunes, my previous apps are not visible. Is there any solution to this?
wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick
Maybe you are looking for
-
I can not download firefox on my pc without it crashing
I tried to download firefox on my lenovo laptop, and it downloads and installs, but as soon as the download is complete it comes up with a message that Firefox has stopped working, I click the check online for a solution and it shows shows an applica
-
Pages NoGo Fullscreen...
I use pages (from the iWork disk) on both a MacBook and a MacBook Pro. I updated both machines to Lion. Now, the MacBook allows me to go fullscreen via the two arrows in the upper right hand of the window. However, my MacBook Pro does not give me
-
One-album artists don't browse immediately to songs
Basically, when I browse by "Artists" and pick one, I get taken to the Albums menu, even if they only have one album (or only have songs with NO album tag). For example, I have songs by Artist A from Album A, and songs from Artist B (with no album in
-
How to add a field VBKD-IHREZ to field catalog in Output determination?
The requirement is maintaining the condition table using Sales Org/Sales Doc Type/Your reference in output determination process. But the field 'Your reference(VBKD-IHREZ)' is not in the field catalog. Can someone tell me how to add the VBKD-IHREZ to
-
Error message when Using SMS portlet
Hi all I'm using OracleAS Portal 10.1.4. I downloaded OracleAS SMTP Portlet from oracle web site http://www.oracle.com/technology/products/ias/portal/point_downloads.html and i read the Release Notes to install it. After installation of SMS portlet ,