BP not Valid for Sales Org - Web Client error

Hi,
We are currently upgrading from CRM 4.0 --> 2007. We have multiple Sales Organisations and different business roles. In the Web Clients we have a number of transactions. When we try and add additional users from other sales orgs to these activities/transactions we get the following error "BP not Valid for Sales Org".
In CRM 4.0 for the various Interaction Centers we never got this error. We were able to add additional users from other sales orgs to transactions.
Mt question is - How can we stop this error from occuring , so that we can add additional users from other sales orgs to these activities/transactions in the various Web Clients.
Any help on this would be greatly appreciated,
Thanks,
Dan

Hi,
This error is appearing for the addition of employees. These employees are set up in the Org model for the relevant Sales Org's, yet the error still appears.
How would you go about adding employees,contacts etc from different Sales Org's to transactions (i.e attendees for an audit) in a Web Client that is set up to be Sales Org specific.
Regards,
Dan

Similar Messages

Web Client - BP not valid for Sales Org - CRM 2007

Hi,
In the Web Client (CRM 2007, for the Quick Create Activities it is not possible to add Business Partner's as Internal Assignees,Towards Awareness or Person's Responsible. There is an error message - "TEST1 is not Valid for Sales Org" -
This issue never occured previously with the "Web Interaction Centers" - CRM 4.0, when we added in Internal Assignee's , Towards Awareness BP's.
Any help on this would be greatly appreciated
Thanks
Dan

Hi,
I suppose this is not the right forum for this issue...
Regards,
Wolfhard

Product is not valid for Sales org and distribution chain

Hello friends,
When i am saving the trade promotions , i am getting error message
"Product XXXX is not valid for distribution chain XXXX, XXXX"
I have maintained sales organization and distribution channel in commpr01 under sales and distribution tab.
kindly help.
Regards,
Srinivas

Hi Srinivas,
the error is raised from the trade promotion CCA check - raised from method CL_CRM_MKTGS_PD_CCA_CHECK_HDLR~CHECK. There are the following checks performed:
* There are several checks to do based on the distribtion chain
* Execute the checks and identify which products fail which check
1. *   Determine if the product passes the distribution chain check
2. *   Determine if the product category 1 of the product assignment
   *   passes the product category check
3. *   Determine if the product category 2 of the product assignment
   *   passes the product category check
4. *   Determine if the product group of the product assignment
   *   passes the product group check
5. *   Determine if the sales status of the product is set to blocked
You may also need to check the sales and distribution data of the product category or product group of the mentioned product, if this is assigned to any.
best regards,
Johannes

Material not defined for sales org

Hi,
when i try to select the item code in CUSTOMER-MATERIAL info. i cant able to get the item which created in MM01. and also getting the message .
"material not defined for sales org". can you help us how to resolve this one.
thanks
Bala

That means that particular material has either been created without extending the required sales views or material code has not been created.
Go to MM01, key in that material code, select all sales views and execute. Maintain the required sales area and save.
thanks
G. Lakshmipathi

Key not valid for use in specified state error message

I did the update for my iPhone and also tried to update iTunes. I kept getting an error message of "key not valid for use in specified state" error message. I thought that if I uninstalled iTunes and re-installed it, that it would be fine. I'm still getting the message and now I don't have iTunes. When my phone updated, I couldn't download anything/backup my phone to iTunes. Please help. Thank you in advance.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For further problems installing iTunes see Troubleshooting issues with iTunes for Windows updates.
tt2

DontSaveSensitive; Key not valid for use in specified state error

I initially had my packages set to 'EncryptSensitivewithPassword' and usedthe config files. My job executes fine. But I noticed I was getting THE error "......Key not valid for use in specified state.....". So, I change the protection level
to 'DontSaveSensitive' , saved packaged ,build and re-imported it. And I still get the same result.
What am I doing wrong??   Package is on the same server where it was built.
I have a package in production that executes without the error. I made a change to the package (logging) in test and now it also encounters same error as the package referenced above.

created ssis package logged in as testsrvr\admin; tests fine.
      protection level - don't save sensitive
      use xml config files
move to production server logged in as prodsrvr\admin; tests fine in bids.
exec package via sql agent (runs under domain\prodsrvr account ). Both attempt same package
job attempt #1
type - cmdexec
run as - SQL Agent Service account
command - exec using dtexec.exe /SQL "\DS\DSU002A 586SSN_TO_SQL" /SERVER SQLDRK51 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
receive error
Executed as user: ILSOS\sqldrk51. ... 9.00.4035.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started: 7:00:00 PM Error: 2010-08-30 19:00:00.33     Code: 0xC0016016
Source:       Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there
is a cryptographic error. Verify that the correct key is available. End Error Error: 2010-08-30 19:00:00.35     Code: 0xC0016016     Source:       Description: Failed to decrypt
protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error Error: 2010-08-30 19:00:00.35     Code: 0xC0016016     Source:       Description: Failed to decrypt... Process Exit Code 0. The step succeeded.
Job Attempt #2
type SSIS
run as SQL Agent Service account
package source file system
package - I:\SSISProjects\DSU002 Viisage Data Transfers\Viisage Data Transfers\DSU002A 586SSN_TO_SQL.dtsx
no error
Executed as user: ILSOS\sqldrk51. Microsoft (R) SQL Server Execute Package Utility Version 9.00.4035.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started: 12:54:03 PM DTExec: The package
execution returned DTSER_SUCCESS (0). Started: 12:54:03 PM Finished: 12:54:08 PM Elapsed: 4.953 seconds. The package executed successfully. The step succeeded.

Sales document type is not defined for(sales org/division/distribution chan

Hi Friends,
I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
Any pointers will be rewarded.
Regards

Hi there,
When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
Only then you will be log a sales order for a sales area.
Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
Regards,
Sivanand

BAPI_CONTRACT_CREATEFROMDATA not defined for sales org distr channel langu

I am using BAPI_CONTRACT_CREATEFROMDATA to create a contract. If I use a material other than a product, I get no error. If I used a product type material< I get an error statign that the material is not defined in sales organisation dirtibution channel langu EN (I have checked the material and it does contain text.
Any ideas what the problem is?
Thanks,
Leanne

material is not extended to the sales org, etc., (see table MVKE) or you're supplying wrong combination of VKORG, VTWEG, SPART values.

Key Note valid for use in specified state : error ...

Installing Skype failed error : code 1603
Ive tried uninstalling Windows Security update KB2918614.
Ive also removed Skype and its contents from its previous location.
Im really stuck !
what do i do ? i really need skype to work
Solved!
Go to Solution.

Try this:
http://community.skype.com/t5/Windows-desktop-client/Lastest-version-of-Skype-won-t-install/m-p/3638...
You can also try this automated procedure:
http://community.skype.com/t5/Windows-desktop-client/when-was-go-for-install-it-s-show-me-keyset-was...

Site behind load balancer - Key not valid for use in specified state

Hi,
I have created a sharepoint application page to access an active end point on ADFS and establish a fedauth session. All works well in single server. But when the page runs behind load balancer with 2 servers, it fails with key not valid for use in specified
state exception. Stickiness is enabled on load balancer. verified that.
I had made few changes to config file in microsoft.identitymodel section to accomodate adfs custom login. This included removing securitytokenhandlers and issuertokenresolvers as well. Is this impacting the encryption/decryption in anyway?
Any pointers would help.
Reference point for my application page : http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=76

Hi,
As I understand, you encountered the error “Key not valid for use in specified state” when ADFS custom login.
In order to run in Windows Azure Web Sites a Web application which uses WIF for handling authentication, you must change the default cookie protection method (DPAPI, not available on Windows Azure Web Sites) to something that will work in a farmed environment
and with the IIS’ user profile load turned off.
1. If you are using the Identity and Access Tools for VS2012, just go to the Configuration tab and check the box “Enable Web farm ready cookies”.
2. If you want to do things by hand, add the following code snippet in your system.identitymodel/identityConfiguration element:
   <securityTokenHandlers>
     <add type="System.IdentityModel.Services.Tokens.MachineKeySessionSecurityTokenHandler,
             System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
      <remove type="System.IdentityModel.Tokens.SessionSecurityTokenHandler,
            System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </securityTokenHandlers>
There is a similar case:
http://stackoverflow.com/questions/19323287/key-not-valid-for-use-in-specified-state-error-for-net-4-5-mvc-4-application
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ERROR: "key not valid for use in specified state" when updating to Lightroom 5.6 in Win8.1

While doing a routine update from Lightroom 5.5 to v5.6 in Win 8.1, the installation halted at the start of the installation with the vague error message, "key not valid for use in specified state". Although v5.5 was working just fine, the install routine deleted the v5.5 application files. I rolled back to the previous system restore point (set just prior to the install) and recovered the executable files. However, now the 5.5 files won't open the default catalog, none of the backups, or even create a new catalog.
As v5.x was purchased as an update to v4.x, I've tried to reinstall the original Lightroom v4.x app from the factory disk. I get the same error.
Suggestions?
Thanks. Dan

I have a similar problem to Dan. while doing a routine upgrade from Lightroom 5.5 to 5.6 I got the
: "key not valid for use in specified state"
error and now Lightroom has completely disappeared. I've tried to uninstall, but there is nothing to uninstall. Going back to try to install the original 5.4 just results in the same error.
A problem may have been that I closed Lightroom when the upgrade started to download. It then re-opened again when the install was halfway through., I assumed that was an error and closed it. just after that the error first appeared in the installer.
I still had an older version of lightroom 4 installed. I've uninstalled it, and that didn't make any difference.
I've also tried removing anything in the registry left over from the old installs and that didn't help either.
Any suggestions?
CHeers, Angus

Key not valid for use in specified state - I do I fix this error when installing Adobe Reader

How can I install reader when I get this error: key not valid for use in specified state

That error is caused by a Windows Update. Make sure you have all subsequent updates installed.

"key not valid for use in specified state" when installing itunes

I recently uninstalled an older version of itunes, and every time i try to install the newest version it wont work.
I just keep getting the message "key not valid for use in specified state". If you know what to do could you
please make it simple. also do not send me to apple's help section, it does not have ANY answers.
thanks.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
There is a link to 7-zip in the Install missing components section of the user tip Troubleshooting issues with iTunes for Windows updates, but if you have the key not valid error the advice above should work, and there is no need to break down the setup file.
tt2

SQL Server Mgt Studio 2008 installation problem - Key not valid for use in specified state

I'm setting up SQL Server Management Studio 2008 on my laptop. It installed fine, but failed to import a regsrver file exported from another machine. This appears to have been due to the fact that I exported the file with usernames and passwords, although I must admit that's pretty darned inconvenient if it can't be done.
Nevertheless, I exported the file again without usernames and passwords, but the new install now won't let me even see servers, let alone import any new ones.
When I start Studio, it gives me the "Key not valid for use in specified state" error. When I 'continue', I'm delivered to a screen with the 'registered servers' pane crippled. It has no contents at all and no ability to add, select, import, export. Nothing there.
How do I rectify this?
The installation is on Windows 7 Home Premium.
Thanks for any suggestions.

Hi Don,
Since this issue was still not resolved even after you reinstall SQL Server 2008, I think that this issue is probably related to some corrupted files or registry keys. Please refer to the following steps to see if you can resolve this issue:
1. Close your SSMS;
2. Go to the folder %appdata%\Microsoft\Microsoft SQL Server\100\Tools\ and check if there is a Shell folder, if so, rename it to Shell-Copy;
3. Re-open your SSMS to see if the error persists.
Everytime SQL Server 2008 Management Studio starts, it will read information from this folder to retrieve and recover some data. If the information does not exists, it will recreate new ones. Please check if this helps.
Best regards,
Charles Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help
To add to Don's comment, if you are using a different account (for example, an SA account) to run SQL Server management studio then make sure to change the user profile name when you browse to "%appdata%\Microsoft\Microsoft SQL Server\100\Tools\".
I know many of us developers have multiple accounts and I usually have my SA account have logon privileges on databases not my regular AD Account.
Other than that, the reason why this fails is because MS encrypted the regsrvr file on the source computer using the source computer's ID and is therefore unable to decrypt the file on the destination computer. To me that just doesn't make sense since the
whole idea of Export and import was to move this information across computers! And that's why this works when you import without username and passwords - no more encryption/decryption. Since we use integrated windows logon (trusted_connection=true) it works
great. For the few servers that we had SQL Logons I had to manually type them in and save. But all in all, pretty painless.

Issue installing ITunes : error key not valid for use in specified state

On the latest update for iTunes for Windows the updated couldn't complete as it gave me the following message " key not valid for use in specified state". I then completly uninstalled iTunes and its components in the order advised, rebooted my system, ran the latest ITunes setup and still get the message " key not valid for use in specified state".
I have checked all the directories to ensure no remnants.
Any one got an answer to this issue as I no longer have access to ITunes. I have a Laptop running Windows Vista Business
Thanks,
Stones of Gold

It seems we may have a more targeted solution. Based on posts in the thread key not valid for use in specified state I've just added the following to the user tip.
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

BP not Valid for Sales Org - Web Client error

Similar Messages

Maybe you are looking for