BP number not getting created while creating org structure in PPOMA_CRM

Hi,
we have sol Man 4.0 SP15. I am creating org structure in PPOMA_CRM. After creating the org units, the BP number are NOT getting generated automatically. Please advise on this.
Regards
Kumar

Hi,
Hav a look at the below post
[PPOMA_CRM no BP number assigned|PPOMA_CRM no BP number assigned]
Thx,
Waseem

Similar Messages

  • Methodology/Processes Not getting reflected while creating a role via BRM in GRC

    Hello All,
    The methodology I have created is not getting reflected while creating a new Single role.
    I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
    Please suggest.
    Thanks
    Regards,
    Shruti

    Methodology is updated when you press save after completing the first step.
    can you please share screen shots of configuration and issue you are getting

  • Check box GEN_NEW is not getting checked while creating a change order.

    Hi Experts,
      I have written a zee function module to create a change order.I am calling this function module from an external system.In my zee function module I am calling a standard function module
    CCAP_ECN_MAINTAIN.I am able to create the change order successfully but when I open the object types in the change order the check boc of the field GEN_NEW is not getting checked.I am unable to find the field and default it to 'X' so can you please help out over this issue.Answers will be rewarded with good number of points.
    Thanks,
    Sridevi.

    Hi,
    If you want to close a line item for a PR Number, refer FM BAPI_REQUISITION_DELETE
      CLEAR : wa_pr_close,
              wa_return_close.
      REFRESH : it_pr_close,
                it_return_close.
      wa_pr_close-preq_item  = lv_bnfpo. "<--Line Item Number (BNFPO)
      wa_pr_close-delete_ind = c_check.  "<--set as X (c_check = 'X')
      APPEND wa_pr_close TO it_pr_close.
      CLEAR wa_pr_close.
      CALL FUNCTION 'BAPI_REQUISITION_DELETE'
        EXPORTING
          number                      = lv_banfn  "<--PR Number (BANFN)
        TABLES
          requisition_items_to_delete = it_pr_close
          return                      = it_return_close.
    Hope this helps you.
    Regards,
    Tarun

  • User exit not getting triggered while creating the vendor

    Hi all,
    I wanted to extend the idoc(crermas01) according to my reqiurement.
    But when I am trying to create a vendor using the IDOC cremas01 the user exit EXIT_SAPLKD01_001 is not getting triggered.
    Can anybody tell me the reason why it is happening so...........
    Thanks and regards,
    Vinil.

    Is your Idoc generated after the execution?
    Where is you break-point, it is inside EXIT_SAPLKD01_001. Please note FM EXIT_SAPLKD01_001 will not be called unless it is implemented using project (CMOD) and project is active.

  • BED & CESS not get updated while creating excise invoice

    Hi experts,
                   When i create excise invoice with reference to commertial invoice,BED,CESS notget ubdated
    in excise utilization tab "DEEMED is in blue color.How can i this into "NOBAND"
    I have done the CIN Customizing
    Please correct me ASAP........................
    Thanks

    dear experts....................help me to solve it

  • Outbound IDOC not getting triggered while new master data is created

    Hi Experts,
    I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
    I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
    I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
    Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
    Thanks in Advance,
    Vinoth

    Hello,
    when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
    As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
    Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
    regards,
    Abhishek

  • Getting error while creating the variable of Schema Element type

    Hi everybody,
    For creating a variable of schema element type I am doing the following steps...
    Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
    IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
    What is mean by that.
    I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
    Thanks.

    Hi,
    I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
    [http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
    The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
    Regards,
    Nacho

  • Getting Error while creating Genric Datasource

    Hi,
    I was try to create genric extracter where i was getting error
    While creating view genric extracter where i am getting error "Entry A ZV_ZFRT  does not exist in DD02L - check your entry".
    My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
    Which extracter i need to create as given scenario?
    Does view will fullfill with my requirement or any other extracter.
    Please some one can help me in this scenario.
    Answer would be great appreciate.

    Hi,
    Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
    Refer this link:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Hope this helps.
    PB

  • Getting error while creating Business Action with EDI EDIFACT 837 document.

    Hi,
    When I am trying to create a business action with EDI 837 &lsquo;.ecs&rsquo; file, I am getting a error. It is not creating the business action. Even it is not displaying any error details.
    Please help me in resolving this issue as it's very urgent.
    Thanks in advance.

    Hi Jyotirmoy,
    What error you are getting exactly while creating the business action? Did you try to create business action for any other protocol? If not, then please try to create business action for any other protocol and check whether you are getting the same error over there also.
    Regards,
    Anuj

  • Getting ewrror while creating GD view Extracter

    Hi,
    I was try to create genric extractor where i was getting error
    While creating view generic extractor where i am getting error "Entry A V_ZFRT does not exist in DD02L - check your entry".
    My requirement is need to create extractor which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation between these tables as like foreign key and refrence key.
    Which extractor i need to create as given scenario?
    Does view will fulfill with my requirement or any other extractor.
    Please some one can help me in this scenario.
    Answer would be great appreciate.

    Hi Lars,
    Thanks for the reply.
    If i understood correctly , you are suggesting to create var_out1 and var_out2 in output ? If yes can you please guide me on how to do that? I tried but did not find anything suitable to declare table.
    Thanks,
    Girdhari

  • Getting error  while creating users in Peoplesoft

    Have a good day
    new fresh instance installed , getting error while creating users in peoplesoft
    SQL ERROR FUNCTION SQLExec
    ERROR POSISTION 52
    RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
    pswdreqspecial pswdreqlower
    PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
    original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
    PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS

    >
    RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
    pswdreqspecial pswdreqlower
    PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
    original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
    PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
    >
    How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
    How is it possible that the second original statement has two more errors:
    PSWDREQUPPERS should be PSWDREQUPPER
    FORM should be FROM.
    Please provide the actual error which is being raised, without editing.
    Hakan

  • Getting error while creating the Shopping cart.

    Hi ,
    I am getting error while creating the Shopping cart.
    a.Error in account assignment for item 1  (Item  Testing SC ) 
    b.Duplicates of Cost Centre T10063 are defined in SRM  (Item  Testing SC ) 
    Kindly provide the solutions.
    Thanks,
    Dev

    Try the following in the ERP backend system:
    Standard Hierarchy Inconsistencies
    Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
    Update from SAP Global support, the following was the email received:
    in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
    If you think that your standard hierarchy is inconsistent you can check that as following:
    Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
    Alternatively, you can run the report 'RKCORRH1' (TN SE38).
    Run both the Hierarchy->Master data->test and the
    Hierarchy->Master data->comparison.
    As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
    Once the above two are run, again when you go to test, the inconsistency disappears.

  • Pick activity is not working properly while creating two or more file adapt

    Hi,
    pick activity is not working properly while creating two or more file adapter for bpel process.
    bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
    can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
    Thanks
    sagar

    Does anybody tried this?
    Thanks
    sagar

  • BOM editing should not be allowed while creating P.O./ Scheduling agreement

    BOM editing should not be allowed while creating P.O. / Scheduling agreement

    Hi,
    I think that when you create a subcontracting PO it READS the valid BOM, so there's no locking. From a business point of view you need to question such a requirement, since in SAP you can have many kinds and types of BOMs. Then what if one of the BOMs is open in change mode (edited) exactly when you try to create the order? It should not allow you to create the order? Why?
    Regards,
    Mario

  • Pdf printer is not get installed while installing adobe acrobat pro 11 in win 7 32 bit

    pdf printer is not get installed while installing adobe acrobat  pro 11 in win 7 32 bit

    BlackCat,
    Two things:
    1) Acrobat 8 Pro is not Win 7 compatible, no less Win 7 64-bit copmpatible
    2) Reader X and Acrobat 8 are not a supported combination. Reader X and Acrobat X is the first Windows combination that is supported by Adobe. Reader X and Acrobat 8 will cause problems.
    You are using a brand new 64-bit OS, you need to use an application that is designed to work with it. Acrobat X is the way to go, HOWEVER, there are still growing pains with Acrobat X, Win 7 64-bit, and the latest version of Office.

Maybe you are looking for