BP Relationship not able to replicate in ECC

Hi All,
I am not able to replicate the Business Partner relationship from CRM to ISU/ECC.
My contact person and new BP are getting replicated but not the relationship information.Please suggest how i can do this?
Regards
Arun Kumar

Hi All,
I got teh solution for this.
If you do not have mobile scenario, kindly do the following
customizing settings:
SAP Implementation Guide -> Customer Relationship Management ->
CRM Middleware and Related Components -> Mobile Scenario Setup ->
Activate Mapping Functions.
Here, please uncheck the 'Active' flag for all BUPA_REL and
BUPA_MAIN entries, which are mapped to function module
BP_REL_CRM_TO_CDB.

Similar Messages

From DRFOUT not able to replicate the material, I-doc is not triggering

Hello Experts,
I am implementing SAP MDG for Material. I have done all the required confiration for Data replication as per the standard configuration document.
I want to replicate to another SAP system from SAP MDG hub.I have created the Data replication model and all the required configuration for maintain logical system, Distribution and generated partner profile with the necessary message types. But when I am executing DRFOUT no i-doc is generated even though it found material successfully depending on the filter criteria.
From BD10 I am able to replicate the Material and I-doc has been gererated and I can see from WE02 that the i-doc has been sent successfully.
Please help me out to get the answer why the i-doc is not creating while I am executing DRFOUT.
Regards,
Soumya De

Hi Soumya,
It is important that you complete the config and setup the technical settings for business systems in both the sending and receiving systems. Config :Masterdata Governance - General Settings - Data Replication - Define custom settings for data replication - Define Technical settings - Define Technical settings for business systems.
The business system, Logical system and RFC destination must be the same value in all of the 3 fields and must have at least the same entry for the 3 fields with the sending system as well as an entry for the receiving system. Please note both systems should have the same entries to be a sending and receiving system. Make sure you complete the second part of the config for your BO types.
So what we did, we added all systems in our config client and transported it to all our other clients.
Hope this will help you
Regards
Riaan

Not able to replicate Custom SyncBO

Hi,
I have replicated custom syncBo Ztest_030 of type T51,the program was executed successfully
but i'm not able to find the enteries neither in merep_deltaBO nor in merep_207.
The log says
Z_MEREP_GEN_T51_____Ztest_030 has started for run number 0000032838 and runtime counter 1
Conversation ID not specified.
Z_MEREP_GEN_T51_____Ztest_030 has finished for run number 0000032838 and runtime counter 1.
can anyone guide how to proceed.
Regards,
Nitika

Dear Vimal,
Pls refer oss note# 437477.
Pls let me know if that solves your problem or not.
Also pls find :
http://help.sap.com/bestpractices/crossindustry/crm/v240/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc
search by DNL_CUST_S_AREA.
Thanks,
Atin
Reward points if it helps.

Not able to replicate Vendor from R/3

Hi
We have recently upgraded the EBP from 4.0 to 5.0. I am using REPVEN to do this which was working fine in SRM 4.0. But when I run this transaction I get error
"Error carrying out job. Execute program directly Message no. BBP_BPRM047"
The programme used by this transaction is EBP_VENDOR_GET_DATA_JOB.
I have also tried to do this thru BBPGETVD. Here i get the error that Object ID does not exists. I am using the same object ID which was used in the above transaction.
I want to know whether Object Id gets changed after the upgradation. Also i want to see this object ID. Where to check this object ID of vendor. I dont have authorisation ppomv_bbp.
Thanks in advance..........

Hi
Ideally you should be having SAP_ALL access, before you replicate the Vendors from R/3 to SRM using BBPGETVD Transaction.
Ask you BASIS team to provide atleast all the require authorizations to your SAP UserID in this case.
Here are the detailed steps in the links below ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
Re: How to enable the Initial load of Vendor and Material replication
Re: Vendor replication Error. SAP R/3 to EBP system
Re: External number assignment - vendor replication
Re: Vendor replication: Delta modification : Report BBP_VENDOR_SYNC : SLG1
Re: Vendor replication
Re: Vendor replication
Regards
- Atul

Urgent : Not able to replicate customer from R/3 to CRM system.

Hi All,
I am performing the following steps in the testing system.
1. Defining the request through the t-code R3AR2.
2. Starting the request through the t-code R3AR4.
After the above steps, I do not see any BDoc being generated (t-code SMW01) and when I check the request status (t-code R3AR3), it is in status 'Running'. This is the status of the request even after 2 days.
The same works fine in production system and an BDoc gets generated immediately.
Can someone please let me know what could be the problem. This is very urgent.
Regards,
Madhu

Hi,
Do you have a filter in the adapter object
CUSTOMER
in the test system? That may be the reason of the Bdoc not getting created.
Otherwise,
1. you need to debug the R/3 extract module to see if data is being extracted.
2. If yes, you can deregister the CRM inbound queue
R3AR*
queue in
SMQR
to see if there is a queue entry. This will mean that a Bdoc is already created.
Hope this helps! Reward if its useful.
Regards,
Sudipta.

Not able to see backend material document number in SUS

Hi,
A GR is created in ECC. It is avaiable for disply in the supplier's login. We are able to achieve this.
The question is "We are not able to see backend (ECC) material document number anywhere on the screen. We are only able to see the SUS Confirmation number (i.e. as per the number range assigned to BUS2233). Is it standard behavior?
Details: SRM7.0 SP07, ECC Ehp4, Using MM-SUS. Plan driven procurement.
Ganapathi

Dear Manjunath,
Thanks for the response.
We have noticed that, the back end (ECC) material documents are getting replicated to SUS as we are able to see this number in BBP_PD & BBP_PDBEH-BE_OBJECT_ID.
So, let me put the question this way.
Our issue is with display of document in the portal (BSP Pages).
For Example, in case of Invoice, the supplier can see the back end MIRO invoice document number with the "External Reference" Label, under Basic Data section. The case is NOT same with GR. The back end (ECC) material document number is NOT seen any of the layout (for end user, who has logged in as supplier).
Is it standard behavior? If we want that, the suppliers should be able to see the material document number in the portal, when a GR is created in ECC, what settings we have to do?
Ganapathi

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

Not able to find masterdata source from ECC

Dear All,
fist time I'm workin with HCM in SAP BW
I'm not able to find masterdata source in ECC side for below Objects, could any one suggesion me how to find the datasource?
0APPLIC - Application
0CDCY -Candidacy
0POSTING - Job Posting
Candidate - 0CANDIDATE
Activity for Candidacy- 0CDCY_ACT
Requisition - 0REQUI
Application Source - 0APPL_SCR, this master data for 'Recruitment'
Thank you very much in advance
Best Regards,
Narasimha

Hi ganesh,
I'm not able to find E-Recrutment Application in RSA5 Tansaction, could you please explain me wt is the next step i should follow?
Best Regards,
Narasimha

Not able to do profiling on ECC and BW

Hi Experts,
Environment: IPS 4.2 , DS 4.2 and Information steward 4.2
ECC 6 and BW 7.4 SP3
Configured RFC for SAP ECC and BW.
When trying to do profiling on SAP ECC , I'm able to connect to SAP ECC and import tables and view data.
But when I try to do Profiling it is throwing error.
Below is the Log Message in C:\Program Files (x86)\SAP BusinessObjects\InformationSteward\MM\log folder
************* boeSystemSession "*************" (TSK-10020)
[E] 2014-06-13 14:33:47.247 [TaskSchedulingService][Thread-7] Output>Extracting arguments from C:\Program Files (x86)\SAP BusinessObjects\InformationSteward\MM\bin\..\config\MM.properties.
[E] 2014-06-13 14:33:50.086 [TaskSchedulingService][Thread-7] Output>Initializing environment from EnterpriseNode 791.
[E] 2014-06-13 14:33:50.149 [TaskSchedulingService][Thread-7] Output>Extracting arguments from C:\Program Files (x86)\SAP BusinessObjects\InformationSteward\MM\bin\..\config\MM.properties.
[E] 2014-06-13 14:35:03.773 [TaskSchedulingService][ORBacus:ThreadPerRequest:Dispatcher] Job failed with error code: 4 (TSK-10017)
[C] 2014-06-13 14:53:07.246 [TaskSchedulingService][ORBacus:ThreadPerRequest:Dispatcher] Initializing environment from EnterpriseNode 791.
[E] 2014-06-13 14:53:07.246 [TaskSchedulingService][ORBacus:ThreadPerRequest:Dispatcher] Processing [object id=8496] (TSK-10001)
[E] 2014-06-13 14:53:07.262 [TaskSchedulingService][ORBacus:ThreadPerRequest:Dispatcher] Job Server process id = 5464 on machine BIDSDEV.olamdomain.com. (TSK-10024)
[E] 2014-06-13 14:53:07.558 [TaskSchedulingService][ORBacus:ThreadPerRequest:Dispatcher] Job launch command: "C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/win64_x64/sapjvm/jre/bin/java" -Xms128m -Xmx1g -cp "C:/Program Files (x86)/SAP BusinessObjects/InformationSteward/MM/lib/MMLoader.jar"; -Djava.system.class.loader=com.bobj.ConfigurableClassLoader -Dclassloader.properties="C:/Program Files (x86)/SAP BusinessObjects/InformationSteward/MM/config/classloader.properties" -Dtracelog.configfile="C:/Program Files (x86)/SAP BusinessObjects/InformationSteward/MM/config/tracelog.ini" -Dlib="C:/Program Files (x86)/SAP BusinessObjects/InformationSteward/MM/lib" -Dext="C:/Program Files (x86)/SAP BusinessObjects/InformationSteward/MM/lib/ext" -Dbo_home="C:/Program Files (x86)/SAP BusinessObjects/" -Dboe_sdk="C:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/java/lib/" -DINSTALLDIR="C:/Program Files (x86)/SAP BusinessObjects/InformationSteward/" -DLOG.DIRECTORY="C:/Program Files (x86)/SAP BusinessObjects/InformationSteward//MM/log/" -DLOG.FILENAME=TaskUtility_8496.log -DOUTPUT_FRS_DIR=frs://Output/a_048/033/000/8496/ -Dicc_resources="C:/Program Files (x86)/SAP BusinessObjects/InformationSteward//MM/resources" com.bobj.mm.utility.Utility com.sap.icc.task.TaskUtility -c MM.properties -configurationObject 8496 boeLogonToken ************* boeSystemSession "*************" (TSK-10020)
[E] 2014-06-13 14:53:08.588 [TaskSchedulingService][Thread-7] Output>Extracting arguments from C:\Program Files (x86)\SAP BusinessObjects\InformationSteward\MM\bin\..\config\MM.properties.
[E] 2014-06-13 14:53:11.365 [TaskSchedulingService][Thread-7] Output>Initializing environment from EnterpriseNode 791.
[E] 2014-06-13 14:53:11.428 [TaskSchedulingService][Thread-7] Output>Extracting arguments from C:\Program Files (x86)\SAP BusinessObjects\InformationSteward\MM\bin\..\config\MM.properties.
[E] 2014-06-13 14:56:06.139 [TaskSchedulingService][ORBacus:ThreadPerRequest:Dispatcher] Job failed with error code: 4 (TSK-10017)
================================================
similarly When trying to do profiling on SAP BW , I'm able to connect to SAP BW and import tables , But not able to see data.
Thanks in advance .

Hi Purima,
I would agree with Dirk. Profiling on staging DB would be lot easier way.
But if you dont have that luxury....
The issue you are facing is mainly due to missing/outdated transport files & Authorization issues.
1916294 - Upgrading SAP System fails with issues from /BODS
functions
1971036 - Error - RFC_ABAP_RUNTIME_FAILURE - Exception_Key:
READ_REPORT_LINE_TOO_LONG
Follow the note the above SAP notes and you should be good to rock and roll...
One last thing... Make sure the SAP user should have the right authorization objects included in the profile as per the latest SAP supplement guide.
Hope this helps. Good Luck !!
Cheers
S
http://service.sap.com/sap/support/notes/1916294

Not able to change the roles through the ERM after uploading from ECC

Hi
We are not able to do the following activities after uploading the roles into ERM from Backend system
1) We are not able to see any transaction data but we are able to see org values.
2) We are not able to change the roles from ERM.
Vserion and support pack leavel : GRC5.3 and 13
Please help in this.
Thanks in advance.
With Best Regards,
support

How are you trying to do this? using oiddas ?
Can you explain more in detail?
Greetings.

Not able to create Follow up transaction since it has been grayed out

Hi Experts,
We have a scenario where in we will create the Sales Transactions (OR) in ECC and then it will replicates to CRM.
In CRM we wants to create Returns Order (RE) as a follow up Transaction to OR (which is replicated from ECC to CRM) .
When I tried to create Returns Order (RE) in CRM as a follow up document to Sales Transaction (OR), the follow up Transaction CRM Returns (RE) has been grayed out. I mean it is in display mode only.
And then I created Sales Transaction (OR) in CRM itself and then I tried to create follow up Returns Transaction (RE) I was able to create.
But I am not able to Create Returns Order (RE) for the Sales Transactions (OR) that have been replicated from ECC to CRM.
Can anybody help me in resolving this issue. Any help ful answer will be rewarded with points.
Thanks in advance,
-Frederick Johnson.

Hi Fredrick,
Please check, whether you have completed all the steps for Copying Control for Business Transactions in the following path in IMG:
SPRO->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions:
- Define Copying Control for Transaction Types
In this step, you define the control for copying business transaction types.
To do this, you enter a source tranaction type and a target transaction type, and define the corresponding conditions for this combination.
- Define Copying Control for Item Categories
In this step, you define the control for copying item categories.
To do so, you enter a source item category and a target item category, and define the corresponding conditions.
- Define Item Category Determination when Copying
In this step, you define a specific item category determination which should be run during copying. The item category is used to find the target item category in the source transaction for the transaction type in the target transaction. This means that the transaction type for the source transaction is not relevant for the item category determination.
If the system cannot find an entry for the copying transaction in this table, the item category is found in the target transaction using the normal item category determination.
This might help you
regards
Srikantan

Not able to save data in pa30 action infotype in production

Hi,
In my organization users are not able to save data in SAP HR pa30 action info type in production.
It is gets hanged and throws run time error after run long time .
in ST22 it will give below error:
Runtime Errors   TSV_TNEW_PAGE_ALLOC_FAILED
Information on where terminated
    Termination occurred in the ABAP program "SAPLRHAS"   in "FILL_STRU_TURBO"
    The main program was "MP000000 ".
    In the source code you have the terminated point in line 759
    of the (Include) program "LRHASF00".
Thanks and regards,
Tarun

Hi,
     Pls check your relationship of reporting postions and set up relationship A002 and also check organization relationship
    otherwise take help form ABPERs and debug and partiuclar prorgram and where and witch object its throwing
    error found out.
Regrads,
Tarun

Not able to see the changes in log

Hi All,
I have a question here. Audit log is enabled as well as changes lofs is also enabled in my system ECC 6.0. Suppose i have changed some table entry via SE16, i mean i have updated a table via SE16, but i am not able to track the changes in SM20 or SCU3. the logs only shows that i have executed the transation but there is not any evidence of which table i have updated the entry, Is there any way to find out this in SAP in my scenario?
Regards,
Subhash

Got it, Table was not in Authorization group so it was not showing the data updation information, after assigning the table into Auhtorization group now i am able to see the updated records for that table in SCU3

Not able to get the connection to mssql server thro native sql

Dear Experts,
I have created a database connection to mssql server thro DBCO t.code.Am not able to get the connection when i am executing Native SQl for geting connection of mssql server.
DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
EXEC SQL.
CONNECT TO :con_name AS 'C1'
ENDEXEC.
Am always getting sy-subrc = 4. The user name and password i have given in dbcon table having full authorization to access mssql database. I am working SAP ecc 5.0. Also both servers are running in windows.
could anyone hlep me on this issue.
Thanks in advance.

Hello, the submitted error must be analyzed according to the Syntaxis and characteristics of the MSSQL database. See explanation of error.
http://doc.ddart.net/mssql/sql2000/html/trblsql/tr_reslsyserr_1_1o1i.htm
Error 156
Severity Level 15
Message Text
Incorrect syntax near the keyword '%.*ls'.
Explanation
This error indicates that the syntax of a Transact-SQL statement is incorrect and that the syntax error was detected near the keyword specified in the error message. The most frequent causes for syntax errors are misspellings of Transact-SQL keywords or operators, and specifying the syntax of a Transact-SQL statement in the wrong order.
One of the more complicated causes for this error may be a compatibility level mismatch for the current database. If the current database has a compatibility level other than 70, Microsoft® SQL Serveru2122 will not recognize any of the keywords that a database with a compatibility level of 70 would recognize.
Action
First, check the Transact-SQL statement syntax near the keyword specified in the error message. Because Transact-SQL language syntax can be very complex, SQL Server may incorrectly report the position of the syntax error as later in the Transact-SQL statement than it actually occurred. Second, reexamine the entire Transact-SQL statement that generated the error. Verify the syntax order of the statement.
Ensure that the database does not have a compatibility level of 65 and has a compatibility level of 70.

Not able to post vendor payment in case of Cash discount received

Hello
We are on SAP ECC 6.0
I'm not able to post an outgoing payment through F-53 T code when cash discount is received from vendor due to early payment before due date.
I get the following error message -
Tax code V0 for country IN has been deleted or incorrectly changed
Message no. FS201
Our tax calculation procedure is TAXINN and we are an indian company in India.
GL account for cash discount received is already defined in OBXU t code for SKE transaction key tax code wise.
V0 tax code is defined through FTXP.
I'm able to display correct cash discount amount and cash discount % when i click on select process open item in F-53 after entering document date; posting date; company code; currency; Bank GL A/c; Amount (Net of discount); value date and Vendor Account.
What am i missing? Why am i not able to post vendor outgoing payment?
Is it possible to post cash discount received to the credit of Stock / Inventory Account as quantity received is not consumed or quantity is lying in inventory?
Thanks.
Vimal

Hello Chintan
I have assigned GL A/c in OBXU t code with and without reference to tax code.
Still, i am not able to post outgoing payment when cash discount is received as i am paying it before due date.
Cannot i take credit of cash discount received to Inventory / Stock Account?
Is cash discount received always posted to non-Inventory / non-stock GL Account?
Thanks.
VS

BP Relationship not able to replicate in ECC

Similar Messages

Maybe you are looking for