BP relationship: validity period for contact person relationship

Hi all,
In CRM 4:
I wish that the Rel category "has contact person" (BUR001) will have from...to-date (validity period).
But even though view BUB020 is listed in the views of this category in Tx BUBA - the fields from...to...are not active when I create new contact person relationship in Tx BP.
what is the problem?
Thanks,

Hi,
Please go to transaction BUBN and in that one field group would be there called 'Relationship Category/Role Definition Category'.
Select that and go to "Field Group--> Fields" and add the following two fields:
Table                        FieldName
BUS050DFLD           DATE_FROM_STR
BUS050DFLD           DATE_TO_STR
Dont check any of the check boxes like "input field" and "not a required field".
Save it and come out and then again launch BP trx to get the desired result.
This is how i solved my problem in CRM 4.0.
Please let me know if you have problems.
Regards
Sidd

Similar Messages

Validity range of contact person relationship BUR001 not changeable?

Hi guys,
Apparently it is not possible to change the validity range (Valid from and Valid to) of the BUR001 relationship.
The suggested workaround is a Z-copy of the BUR001 in which it is possible to change the validity range settings. The problem with this 'solution' is the huge amount of partner determination which takes place on several placed within the system (e.g. partner determination procedures on activities, search functionality etc).
What is the best way to use contact person relationships which can have a validity range?
We are on a CRM7.0 system.
All suggestions are highly appreciated!

The answer to the above question:
In CRM7.0 a flag is added to activate the time dependency on the BUR001 relationship:
CRM_BUT050 Time Dependency: Contact Person Relationship
This can be activated via the following path:
Cross-application Components --> SAP Business Partner --> Activation

Relationship Type field in Contact Person Relationship Web Ui

Hi
In SAP CRM we can differentiate a relationship using relationship type. This field is available in SAP GUI, in "Contact Person Relationship" category, whereas it is not present in Web UI screen for contact. In our project there is requirement to make it visible in UI also. Please help me in this regards.
Thanks & Regards
Hitsm

Hi Hitesh,
Since Contact Person is a very common relationship, it has been removed from the relationship type and has moved into an assignment block. Invariably whosoever is a contact person will come under that assignment block.
Regards,
Harshit

Relationship Between ECC Customers (Contact Persons) and CRM BP

Hello,
I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
We are transferring via bdoc this information from ECC to CRM.
Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
Thanks for the help!
Regards,
Tiffanie

Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
I tried to look for customer_main, customer_rel in SBDM and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
Thanks!
Tiffanie

Contact Person Relationship not displaying in webUI

Hi,
I am facing an issue while creating the Contact Person relationship in webUI. It is displaying in back end (GUI) drop down box, but its not displaying in web UI dropdown box. All other relationships are displaying well in UI.Please suggest to overcome this.
Bob

HI! Bob,
I am in a fix, actually i cant upgrade to sp004(presently in sp002) because it probably would also affect compatibility with other servers as i am using NWDI TREX IPC, so it is not posible for me to upgrade to SP004............
I am still looking forward if you can provide me any help in
If you require to see also contact person-relationships
in "Relationships", you need to eliminate the filtering in BOL
(class CL_BUPA_IL_RELATION->FILTER_RELATIONSHIPS). By creating a new
implementation class (i.e. ZL_BUPA_IL_RELATION with superclass
CL_BUPA_IL_RELATION) and entering this class in viewcluster
CRMVC_BUIL for external object BuilRelationship), you can redefine
method FILTER_RELATIONSHIPS and implement logic according to your needs
I am not able to apply the above solution, as FILTER_RELATIONSHIPS is a private method of the class CL_BUPA_IL_RELATION so how can i redefine it.
Please help me out.............
Thanks a ton
Mayank

Contact Person Relationship to SP.

Hi Experts,
I am faced up with a situation; where if am removing a Contact Person relationship for a Sold to Party; the relationship to the another contact person gets deleted. Possible reason could be both the contact person are identical.
Now, how can i identify whether both the Cont. Person are identical or not; even though GUID for both is different. Is there any field value that makes them identical.

Hi,
I have gone through your query. The question here is bit misleading. You have mentioned that when you delete the contact person relationship of a Sold to party, relationship to another contact person is deleted. No two contact persons can be identical in the system. Whenever you create a new BP in the CRM system, every one are unique in its own way with a New GUID and New BP number assigned to them.
Even though they can remain as duplicate, but 2 contact persons cannot be identical which will lead to a scenario like you have mentioned here. In my opinion this cannot occur. If you elaborate further i can help you out.
I hope this helps.
Regards,
Venkat

Collection contact persons relationship in FSCM

Hi All,
Request your help in creation of Collection contact persons relationship in FSCM and find them in process receivables screen.
We are not mantaining customer contacts in customer master. But only in FSCM
What is the use of collection contact person if they donot show up in process receivables screen?..Please help. i want collection contact person to show up in "Get contact Person" list in process receivables.
Thanks - Donny

Donnesh,
If you dont record the contact person in the customer/ BP then it needs to be stored somewhere for it to be defaulted.
The only way to do this is to add the name once in the process receivables screen and it will then stay there and also be copied through in to the create customer contact screen.
You could look for a BAPI to load the name and number into the process receivables screen, but this would mean processing the customer via the worklist.

Deleting the Contact Person Relationship

I am trying to delete the Contact Person relationship with a Business Partner.
When I am trying to delete the realtionship it is giving out error saying Address is till being used and cannot be deleted.
Any one has any suggestions for me

We are facing the similar problem. Any luck in solving this issue of deleting the Contact Person Relationship.

Problem with Contact person Relationship...

Hi All,
I got the following issue.
"Contact person relationship already exists between partners &1 and &2...."
For this, I have checked the Business partners, tables and GUID's in R/3 and as well as in CRM and checked BP consistency fix...
I have seen change history also, this problem occured to BUPA_REL B.Doc type. While after doing the Synchronization also i am getting errors like "BP already exists and Partner (GUID No) errors occured...
Please advise regarding this issue...
Thanks in Advance.....

Hello,
You are leaving an unmanaged object in the tree when the transaction attempts to commit. If you are going to persist a new VerticalUser, it must reference an existing or managed VerticalHommeArt.
If the VerticalUser references a new VerticalHommeArt, either persist the VerticalHommeArt before or set the verticalHommeArt relationship to cascade persist
Best Regards,
Chris

Campaign execution not send emails for contact persons

Hi All!
I'm facing a problem with Campaigns (communication medium - E-mail): Those are the steps i'm following:
1.Start the campaign, and on the "campaign: Schedule job" screen, i choose "immediately". If i look at the campaign details after scheduled the job, the status is now "job started".
2. To check wich mails were sent, I also had a look at the business partner account that belongs to the target group used. On the "Interaction History" block, there is a line: "Outgoing Email" - on the details of this outgoing email I can see the "To" (Receivers). And here, I have emails from the business Partner contact persons and from the business partner itself (the email that is on the header level of the business partner account, on the "main address and communication data" area). So far so good. That's exactly what i need but,
3. If i go to the tcode, i only have a send request for the business partner itself and none for his contact persons (although those emails are on the "To" line for the interaction history).
I'm working on the Webclient UI, of the CRM 7.0
Does someone knows why the emails are not being sent also for the contact persons?
Thanks in advance.
Inê

I have achieved this by implementing the BADI : CRM_MKT_ADR_SEARCH
In this BADI's method : CHANGE_SEARCH_RESULTS you can modify the data which is being sent back to system for campaign execution.
NOTE: I am using Address Independent Communication Data of Business Partner
Below is my sample code for contact person email :
data: wa_bp_cp_channel type crmt_bp_cp_channel.
field-symbols: <fs_bp_cp_channel> type crmt_bp_cp_channel.
types: begin of ty_cp,
          partner type but000-partner,
          address type but000-addrcomm,
         end of ty_cp,
         begin of ty_bpcp,
           partner1 type but051-partner1,
           partner2 type but051-partner2,
         end of ty_bpcp.
data: it_cp type table of ty_cp,
        wa_cp type ty_cp.
data: it_bpcp type table of ty_bpcp,
        wa_bpcp type ty_bpcp.
data: it_bp type table of ty_cp,
        wa_bp type ty_cp.
read table ct_bp_cp_channel into wa_bp_cp_channel with key com_channel = '03'.
if sy-subrc = 0.
    select partner addrcomm
      from but000
        into table it_cp
          for all entries in ct_bp_cp_channel
            where
              partner = ct_bp_cp_channel-cp_number.
    select partner1 partner2
      from but051
        into table it_bpcp
          for all entries in ct_bp_cp_channel
            where
              partner1 = ct_bp_cp_channel-bp_number.
    if it_bpcp[] is not initial.
      select partner addrcomm
        from but000
          into table it_bp
            for all entries in it_bpcp
              where
                partner = it_bpcp-partner2.
    endif.
    sort it_cp by partner.
    sort it_bp by partner.
    sort it_bpcp by partner1.
    loop at ct_bp_cp_channel assigning <fs_bp_cp_channel> where com_channel = '03'.
      read table it_cp into wa_cp with key partner = <fs_bp_cp_channel>-cp_number binary search.
      if sy-subrc = 0.
        <fs_bp_cp_channel>-addrnumber = wa_cp-address.
        clear <fs_bp_cp_channel>-bp_number.
        clear <fs_bp_cp_channel>-bp_guid.
      else.
        read table it_bpcp into wa_bpcp with key partner1 = <fs_bp_cp_channel>-bp_number binary search.
        if sy-subrc = 0.
          read table it_bp into wa_bp with key partner = wa_bpcp-partner2 binary search.
          if sy-subrc = 0.
            <fs_bp_cp_channel>-addrnumber = wa_bp-address.
            clear <fs_bp_cp_channel>-bp_number.
            clear <fs_bp_cp_channel>-bp_guid.
          endif.
        endif.
      endif.
    endloop.
endif.

Validity period for Mediclaim on ESS

Hi All,
I am facing following problem in case of Claims:
For medical claim in table V_T7INAA i have maintained 1 year.
When i execute PC00_M40_REMS report here i am getting correct validity period for mediclaim from 01.04.2010 to 31.03.2011
but when employee log into ESS validity period is appearing as 01.04.2010 to 31.03.2012
I have checked all the settings in R/3. I do not understand from wher this 31.03.2012 date is coming cause ESS will fetch data from R/3 and in R/3 everything seems to be correct.
Thanks & Regards,
Neha

Hi,
Wel no we have not implemented any exit. we using standard settings only.
I am clueless from wher its picking up these changed dates. Cause on R/3 dates are appearing perfectly fine.
Neha Desai

How to give validity period for tax codes

In fv12 menu the validity period in display mode how to change and give validity period for a tax code

in fv12 you can change the validity period and for the new validity period maintain another record in fv12
Validity from and to by changing the old validity period upto when that is applicable

How to give valid period for tcodes

Hi all,
i have a question how to give a valid period for tcodes.
Thanks&regards,
rani.

You can't.
You can set validity dates for roles - you do this in the roles section of the user master record
If you need a t-code to be locked for <b>everyone</b> for certain periods then you can look into a custom prog that uses tx SM01, though it usually is not a worthwhile control to mitigate the particular risk.

'No data found for contact person 00764' error on Cart

Hiya.
I am getting a message that pertains to 'No data found for contact person 00764' error on Cart. 00764 is the BP number.
In SRM Org plan, the user check is fine.
Please can you suggest.
Thank you.
Pooja Kaur
p&g, India.

Hi
When are yo geting this error mesage ?
Is he (BP) is a requestor or vendor? Give some more details on that BP since you said attributes are ok.
regards
Muthu

Validity period for services in ITS

We are on Extended classic scenario with EBO 4.0 and wanted to have service order created.
When I log into ITS server
Shop -> Describe Requirement ->
I have Description, Internal Note, Quantity, Price, Category and Required on.
However I want "From date" and "To date" instead of just Required on date
Is there any configuration setting that needs to be enabled to have validity period for services.
Any help would be highly appreciated.

Hi,
This is strange!At my place,I can see the foll fields when i goto DESCRIBE REQUIREMENT "link:
Describe Requirement
You can describe your requirement if you are unable to find it in the catalog.
Product Type Goods Services
Description
Internal Note
Quantity
Price
Category
Required BetweenOnFrom -
Pls check whether any BADI(like BBP_SC_UI_CTRL/BBP_SC_MODIFY_UI ) has been implemented to modify this screen in you system.
See these related notes:
Note 976533 - Changing the "Required on"/"Start Date" in shopping cart
Note 1064560 - Disabling Service Button causes change in Label/header.
Note 948473 - Change field labels on 'Describe Requirement' screen
BR,
Disha.

BP relationship: validity period for contact person relationship

Similar Messages

Maybe you are looking for