BP replication CRM to R/3- Editing was terminated

Hi,
We first create a prospect which is not replicated to R/3 but ones the Prospect is converted into sold-to-party we change the classification to Customer and this needs to flow to r/3 but on entering all required general data and sales area data and saving a customer in CRM we find that a bdoc is found in error state "partially sent, recievers have errors" and the error segment shows " Editing was terminated Message no. FB013"
but the Customer flows to r/3 only with general data , sales area missing.
Now if we reprocess the same bdoc in smwo1 then it shows "confirmed fully" and now the sales area successfully flows for the same customer to r/3.
Please let me know why the Customer is not taking the sales area initially during creation and how this can be resolved .
Regards
Prathiba

Hi Prathiba,
The Issue is because of the note  :1163979
The Note : 1243180 will provide you a right fix for your problem.
Best Regards,
Vignesh Ravikumar

Similar Messages

  • Error in Bdoc '....Editing was terminated'

    Hi All,
             I am replicating the BP from CRM to ECC using BDoc type 'Bupa_main' when the BP
    is saved under some role.
    When I save the BP , the Bdoc shows in error 'Partially send, receivers have errors'.
    After reprocessing the Bdoc in transaction SMW01, 1 entry is created in KNA1 and CRMKUNNR,
    but no BP is created. The error list  in transaction SMW01 is shown as
         Messages for business partner 0100000252:     XR     100
         ....Editing was terminated     FB     13
    I checked in ST22, there are no runtime errors.
    I tried CRMM_BUPA_MAP, there I get the message as
    '005     4AF79F489B97018: Object is in status Running'
    And there are no queues in SMQ1 or SMQ2.
    Any idea why it is happening or how to solve it?

    Hi Aditya,
    The problem is mainly because of some user exits in your system.
    So, if its possible, deactivate all the user exists from table : TBE24 and TPS34 in your system and try again.
    And also check in the ECC system - CRMRFCPAR table field SEND_XML is set to "X". If both CRM and ECC are unicode system, then the SEND_XML field in the CRMRFCPAR table in the R/3 system should be set to "X"..
    Also refer the following notes  :
    928974
    788871
    621470
    1049761
    Hope the above information would help you to solve the issue.
    Best Regards,
    Vignesh Ravikumar

  • LSMW, 13 th step .error ---no such file found, editing was terminated

    hi
    Experts, what may be the reason for this.
    upto 12 th step it is working ok.

    Hi Freind,
           There's a Check box - <b>Keep Session</b> in 13 or 14th step.pls click ok to
           that and check ur process.
           After checking this run it.if it's not working then at the session step(14) u
           just unlock ur session and process it.
    Thanks N Regards,
            Manian.

  • Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

    I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
    Suddenly one of the servers is not replicating with the error:
    Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
    All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
    This server has 2TB of data so I'd rather not have to start the replication again.
    Does anyone have any pointers?
    Thanks.

    Hi drensta,
    Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
    Here is a link for "Why is the "Hyper-V Replica Broker" required?"
    http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
    Hope this hleps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Update was terminated error while scheduling maintenance plan

    HI Friends,
    I created a maintenance plan.I scheduled the order and i saved.
    Now when i tried to see the schedule i am getting a message
    "Update was terminated"
    the detailed error is
    Update was terminated
    System ID....   DEV
    Client.......   XXX
    User.....   XXXXX
    Transaction..   IP10
    Update key...   49041E2C02935CCCE10000000AFA0209
    Generated....   30.10.2008, 17:22:18
    Completed....   30.10.2008, 17:22:19
    Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
    Can anyone tell me why this error is coming and how to rectify.
    Thanks in advance
    Vivek
    Edited by: vivek mankad on Oct 30, 2008 1:38 PM

    Vivek,
    Talk to your ABAP/Basis team
    PeteA

  • Express document "Update was terminated"   in miro

    Hi All,
    When i creating an invoice through Tcode : miro,  document number  is generated.after that i go back error is coming,
    " Express document "Update was terminated" received from author "xxxxx".
    how to rectify this problem.
    Thanks and Regards
    Sam
    Edited by: ghandhipk on Feb 26, 2011 3:17 PM

    Hi,
    Check your authorization to post invoice document WRT PO for your company code. Take help from Basis Consultant.
    Also check the number range setting for invoice document in OMBA or OBA7 for"RE" document type.In RE document type check Number range number  & Accounting types allowed ( Vendor, G/L account.Asset & Material etc..)
    Regards,
    Biju K

  • Update was terminated during PO creation

    Dear All,
    we recently copied the client in to a newserver, now we are doing testing
    while creating PO i am getting error Update was terminated by the user xxxx, i checked sm13 (updated requets)
    i found error status as Error in V2 Part
    1     ME_CREATE_DOCUMENT             V1                                 Processed
    2     EINKBELEG_WRITE_DOCUMENT     V1                                 Processed
    3     MCE_STATISTICS_UPD_V1             V1                                 Processed
    4     MCE_STATISTICS_UPD_V2              V2                                   Error
    5     ME_CREATE_MRPRECORD_PO     V1                                 Processed
    6     HANDLE_TEXT_ARRAY_AFTER_COMMIT          V1                 Processed
    7     ME_UPDATE_QUOTA_DIALOG                           V1               Processed
    8     OS_UPDATE_CLASS                                           V1          Processed
    9     RV_MESSAGE_UPDATE                                           V1         Processed
    here row now 4 showing error if i double clicked on it 
    system showing
    Status of update module alert box has come
    function module  - MCE_STATISTICS_UPD_V2
    status                  -MCE_STATISTICS_UPD_V2
    Report                  -LMCS4F10
    Row                     -1,262
    Error details           class-00       number-671
    00 671: ABAP/4 processor: LOAD_PROGRAM_NOT_FOUND
    i found buttons 1)ABAP Editor (F5) 2)ABAP short dump (F6)
    if clicked on abap short dump
    Short text
        Program "RMCX0006 " not found.
    What happened?
        There are several possibilities:
       Error in the ABAP Application Program
        The current ABAP program "SAPLMCS4" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        or
        Error in the SAP kernel.
        The current ABAP "SAPLMCS4" program had to be terminated because the
        ABAP processor detected an internal system error.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
         caught in
        procedure "TMC2F_FROUT_CALL" "(FORM)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        On account of a branch in the program
        (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
        or a transaction call, another ABAP/4 program
        is to be loaded, namely "RMCX0006 ".
        However, program "RMCX0006 " does not exist in the library.
        Possible reasons:
        a) Wrong program name specified in an external PERFORM or
           SUBMIT or, when defining a new transaction, a new
           dialog module or a new function module.
        b) Transport error
    Regards
    Gopala.S

    Usually this error I anticipated were either related to printer message not configured properly, or accounting document not updating correctly. Check either or and see where the problem is.
    Check this blog I wrote on this error:
    I came across one problem at one of my projects which I would like to share for everyone's experience.
    The problem was when client was doing MIGO and when he was saving the document, it was making the MM document, but when you hit back button or go for display it
    came up with this error 'UPDATE WAS TERMINATED'. This problem came up in both MIGO and SD billing document posting.
    Now I had to jott down what the problem really was, so I started closing up on problem, by creating many PO's and doing MIGO'S against them with different document types, all went great and those documents got posted, but when I used the same GL'S as client was using as he was charging it to cost center and the GL'S used there were consumption GL'S,those GL'S were causing the problem. How I found out that GL was causing problem, as I used another GL which was not for consumption and the document got posted.
    Now as the problem got cornered, now we had to figure out how to solve it. Here at client we have two plants, one for Pakistan and one for Philippines, so I checked the same scenario on Pakistan and the document got posted with consumption GL as well. So now its more clear that problem is with client Philippines posting.
    So I sat down with (ABAP) consultant to check out the problem. He went through his checking and pointed out that one document No.  40000400 was not getting updated. Now the question came what document this number is assigned to. Suddenly it clicked my mind to check the client Pk document which was posted with same Gl, so when we displayed that document we came to
    know that this number range was getting assigned to CONTROLLING DOCUMENT.
    So we went back in customizing, and found out that CONTROLLING DOCUMENT current number was stuck on 40000100, whereas the last number recorded in table was 40000400, so we updated the current number there and thats the end PROBLEM SOLVED. This controlling document Number was causing this problem on both MIGO and SD billing document.
    Another solution which came to our mind was to clear the Buffer, so that the number ranges of the clients gets updated and we notified our basis person as well but in mean time we solved the issue.
    Edited by: Afshad Irani on Aug 5, 2010 2:51 PM

  • Oracle BI Publisher Custom Report Error: emsg:was terminated by signal 6

    Oracle BI Publisher Custom Report throws a strange error. Error log below.
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII
    stat_low = 6
    stat_high = 0
    emsg:was terminated by signal 6
    Enter Password:
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # SIGSEGV (0xb) at pc=0xf7094b79, pid=11622, tid=4107962048
    # Java VM: Java HotSpot(TM) Server VM (1.4.2_14-b05 mixed mode)
    # Problematic frame:
    # C [librw.so+0x3d0b79] rxrtdn+0x6d
    # An error report file with more information is saved as hs_err_pid11622.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    Report Builder: Release 10.1.2.3.0 - Production on Tue Nov 16 11:45:22 2010
    Queries work perfectly fine when ran in the database.
    Can you please help me figure out what the issue is???
    Thanks,
    Kesava
    Edited by: KesavaChunduri on Nov 16, 2010 9:51 AM

    Hi,
    Oracle BI Publisher Custom Report throws a strange error. Error log below.Please mention the version along with the OS.
    Please see if (Diagnosing and Troubleshooting Signal Errors [ID 215601.1]) helps.
    Thanks,
    Hussein

  • Cause of "Program was terminated by signal 10"

    Hi All,
    This is Amit from AR dev
    Can any one please tell me what is/are the reason/s of "Program was terminated by signal 10" error in a C program?
    In my case, Program was terminated by signal 10. (In the file arccmm.lpc version 120.1.12010000.6 You can get the file from ARU)
    I put some debug messages in the flow, and based on debug messages, came to know that error is thrown while following assignment (I've added the snippet of log for your reference at the last of the post as well)
    ar_control->arctlid_customer_trx_line_id = (double) arpctlid_customer_trx_line_id;
    structure ar_control is defined in a header, and component "arctlid_customer_trx_line_id" in this structure is declared as double.
    Variable "arpctlid_customer_trx_line_id" is also declared as double.
    I just want to share that issue is not reproducible internally on Linux OS with same file
    It is occurring on customer's instance only, where they are having HP-UX PA-RISC (64-bit)
    I've verified, the file is build with correct header file.
    Any clue on this?
    Snippet from the log:
    =============
    arccmm()+ Current system time is 02-MAY-2010 20:57:55
    Entering the logic
    After first if
    After second if
    arccmm() cust_trx_id: 0 cust_trx_line_id: 0 request_id: 36336893
    Assigned ct_id/SBX1/applmgr/apps_st/appl/ar/12.0.0/bin/RAXTRX
    Program was terminated by signal 10
    thanx
    Amit
    Edited by: user599245 on May 2, 2010 11:24 PM
    Edited by: user599245 on May 2, 2010 11:26 PM

    Hi,
    answer : what values should I put here?
    I think this line starting with "!" meaning it is commentedRemove the ! mark and set this parameter to match the value of the database chanracter set.
    I have done this with active users completed without any error.
    It is with data because when I run for particular department then it ok.
    But when i run for all the department then it is completing with signal 10 or signal 11.In this case, I believe this error is irrelevant to the value of Tk2Motif*fontMapCs.
    Please enable trace and debug for this concurrent program, and check the log file for details about the error.
    Note: 759389.1 - How Can Trace and Debug Be Turned On For A Concurrent Request?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=759389.1
    Regards,
    Hussein

  • Concurrent request failed - emsg:was terminated by signal 11

    I have a concurrent program working fine in HP-UX. -- execution type : report
    However when I tested it from Linux, it failed
    Request language is : AMERICAN
    Request territory is : AMERICA
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    $ORACLE_HOME/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to:
    $ORACLE_HOME/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Previous NLS_LANG Environment Variable was : American_America.UTF8
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are : American_America.UTF8
    stat_low = B
    stat_high = 0
    emsg:was terminated by signal 11
    Anyone has similar experience and how I can run this report from Linux?
    Thanks in advance,

    thanks for the note number.
    checked rex and found CHARSET=31
    tried to convert after changing CHARSET to 871 but still got the same error
    i don't use IX Library.
    one interesting thing is when i have following in uiprint.txt, ar60run generates Segmentation fault but
    1op221a:PostScript:1:Configure your uiprint.txt file:default.ppd:
    when i use following, i got REP-1800: Formatter error.
    Not A Printer:ASCII:1:Configure your uiprint.txt file:none
    any more advise on this issue?
    thanks in advance,
    EDIT:
    further analysis from core file
    (gdb) where
    #0 0x00eebd32 in calpnitems () from /u01/vis10/vis10ora/8.0.6/lib/libca60.so.0
    #1 0x005c04a5 in rwrslt () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #2 0x005815ec in rwisql () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #3 0x00580dee in rwids () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #4 0x004fcb3c in rwcrkyqr () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #5 0x004fba87 in rwcrky () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #6 0x004f7369 in rwcomp () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #7 0x00532edd in rwffminit () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #8 0x00532dd0 in rwffmcreate ()
    from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #9 0x00553f83 in rwfrcprint () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #10 0x00624fcf in rxmbtcrun () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #11 0x006244b9 in rxmbtc () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #12 0x0062bc62 in rxmrun () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #13 0x0061bc8e in rxcrun () from /u01/vis10/vis10ora/8.0.6/lib/librw60.so.1
    #14 0x00b49e9c in snnlpmcal () from /u01/vis10/vis10ora/8.0.6/lib/libnn60.so.0
    #15 0x00b4b95c in snnlslmai () from /u01/vis10/vis10ora/8.0.6/lib/libnn60.so.0
    #16 0x08053884 in main ()

  • Call was terminated because the corresponding service is not available

    Hi experts,
    I've installed SAP NetWeaver 7.01 SR1 ABAP Trial Version. I'm following instructions given and the next step is to log into the system via web gui with this url: http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000. However I'm getting this error:
    Service cannot be reached
    What has happened?
    URL http://localhost:8000/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
    Note
        * The termination occurred in system NSP with error code 403 and for the reason Forbidden.
        * The selected virtual host was 0 .
    I did some research and from what I've read I should activate a service trough so called SICF. After installation I've got only sap management console in wich I have this main NSP node, below that database instance and SAP system instance, I tried to logon to this system instance choosing "logon" from context menu but always with some errors. Now I'm stuck, please help.
    Edited by: kotzi86 on Aug 7, 2010 5:43 PM

    Hi,
    You will need to login using SAPGUI for windows first and then execute transaction SICF and from there, activate this service.
    Please install SAPGUI first on your machine and login using it.
    Regards,
    Shitij

  • BSP page was terminated due

    Hello Experts,
    I have setup the solaris sever system monitoring (Solman with ECC)..
    I folled the simulator tool and configured sytstem monitoring..
    Now when i click Operation- > System monitoring - >  receive an below eror message..
    ===========================
        What happened?
    Calling the BSP page was terminated due to an error.
       SAP Note
    The following error text was processed in the system:
    BSP Exception: Internal Error in Business Server Page Runtime.
       Program CL_BSP_RUNTIME================CP
    Include CL_BSP_RUNTIME================CM001
    Line 196 
    ======================================================
    Observed the below error on the  Dev_w0
    B  dbmyclu : info : pessimistic reads set to 2.
    M
    M Thu Oct 30 16:57:35 2008
    M  rdisp/rb_cleaned_rfc = 0
    A
    A Thu Oct 30 16:58:17 2008
    A  RFC FRFC> fallback on the central gateway <hostname> sapgw00 activ
    C
    C Thu Oct 30 17:00:50 2008
    C  User requested cancel of current SQL on connection 0
    M  program canceled
    M    reason   = soft cancel
    M    user     = WORKER
    M    client   = 001
    M    terminal = 10.74.168.172
    M    report   = SAPLSEOP
    C  OCI-call failed with -1=OCI_ERROR
    C     SQL error 1013: 'ORA-01013: user requested cancel of current operation'
    C  SQL cancelled; calling registered fct. at 0x10031a49c
    M  program canceled
    M    reason   = soft cancel
    M    user     = WORKER
    M    client   = 001
    :q!
    Dev_disp
    ========
    Thu Oct 30 17:00:50 2008
    SoftCancel request for T20 U34 M0 received from IC_MAN
    Kindly give ur the solution to fix the issue?..
    Thanks
    Thirumal
    Edited by: Thiru Thirumal on Oct 30, 2008 9:11 AM
    Edited by: Thiru Thirumal on Oct 30, 2008 11:19 AM

    Hi Tobias,
    in order to copy the standard htm page you simply perform the following steps:
    Open the component in question in transaction BSP_WD_CMPWB_NEW without specifying an enhancement set (this will open the standard component)
    In a separate window open the component in question in transaction BSP_WD_CMPWB_NEW an specify the correct enhancement set (this will open the custom component)
    in both windows open the htm page you want to copy
    select the whole code in the standard htm page and copy it to the clipboard
    switch to edit mode in the custom component htm file, delete its contends and past the contend of the standard htm there.
    save and and active your change
    Christian

  • Log Info  REASON="Job slave process was terminated"

    hi,
    i'm using oracle 10g, i have scheduled a job in scheduler, the job status is "STOPPED" and shows the log details as Details REASON="Job slave process was terminated". wht can be the reason?
    how to resolve it ?
    Edited by: user10745179 on Jun 8, 2009 3:28 AM

    Was it an external job?
    What is the platform and exact version?
    Ronald
    http://ronr.blogspot.com

  • Update was terminated when we do commit work twice in short time

    Hi Experts,
                i have one Data bas update problem. My requirement is to create contracts in CRM with new item category(suppose ZSFT) than what is determined(ZSRT). i am using CRM_ORDER_MAINTAIN FM to create contracts after that i am calling CRM_ORDER_SAVE to save transaction then COMMIT WORK key word to commit in data base. Since transaction is created with Determined item category(ZSRT) i  am calling change transaction bapi  BAPI_BUSPROCESSND_CHANGEMULTI to change item category after that BAPI_BUSPROCESSND_SAVE to save transaction and BAPI_TRANSACTION_COMMIT to commit the work. but second commit is not happening instead error message "Update was terminated" recieved from author "XXXX". when i created test program with BAPIs to change already created contracts to change item category it is working fine.
    Any body has any clue.
    Thanks in advance
    Siva

    Hello Siva, Is your problem solved ? I have the same error and unable to update the partner info on Service confirmation.
    Here is what I'm trying to acheive.. I'm working on an interface that creates a docflow and creates service confirmation against existing service order. In the confimation file when I have new ZAPP((partner function ZAPP) I need to delete ZAPP that gets copied over from service order into the confirmation in docflow. Right now, in my first CRM_ORDER_MAINTAIN call I have one entry for new ZAPP  and I have It_docflow populated. This creates two ZAPPs on the confirmation. I need to delete ZAPP on the confirmation that is copied over from service order.
    Right now I'm reading the confirmation and trying to delete the ZAPP but after my second crm_order_maintain,order save and commit call sequence I'm getting this error update was terminated.
    Experts any help on how to get around this issue would be highly appreciated.
    Thanks

  • Expre Document "update was terminated" received from author "XYZ user".

    Hi Friends,
    Our functional perople have created an output type and configured to the transaction VA02 transaction.
    and Now they ,in VA02 transaction, clicking on the button  Clicking on 'Document Header details' button they are chaning the purchase order type in Order data tab .
    and in menu they are selecting Extras->output->Edit,now they are taken to Messages screen.
    there they click on further data button,and change the Dispatch time 4 Send immediately( When saving the application ).
    they come back and save.
    In VA02 transaction when they are opening the same document ,I am getting Termination pop saying,
    Expre Document "update was terminated" received from author "XYZ user". when I enter in The changes Which I made to Purchase order type are nto saved.
    please let me know, what could be reason for getting the error.
    Do the functional people need to make any configurations?
    Please help me.
    Regards,
    Xavier.P

    Hi Micky,
    When I checked with Functionl people, they say that the output is not getting Created for the Dispatch time 4 Send immediately( When saving the application ). When I select the 3 send with application own transaction,I am not getting the termination popup and even the data is getting saved becouse it does not create output.
    Regards,
    Xavier.P

Maybe you are looking for