BP replication from ECC

The BP's created for one particular sales area is not getting replicated into CRM, though before sometime it was happening.
The BP with the general data, and role of sold to party BP only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales are in the ECC, do not flow to the ECC. However for other sales areas it flows.
What t code or where in middleware should I look to resolve this situation.
Thanks and regards,
Tariq

Hi
We have observed that if the value of sales org is missing in the functions tab in ppoma_crm, sales area data is not visible in business partner although it's assigned to role sold-to party.
Anyway, sorry for the wrong post, if you are not looking for this information.
Also, please check if the below mentioned settings are maintained in your case
Customer Relationship Management  Master Data  Organizational Management  Assignment of Organizational Units from SAP ECC  Assign SAP CRM Sales Organizations to SAP ECC Sales Organizations
Regards,
Vipul Kumar

Similar Messages

Material Group Replication from ECC

Dear SRMers,
System Landscape : ECC 6.0 and SRM 5.0.
I am doing a material group replication from ECC to SRM using the DNL_CUST_PROD1 customizing object. Before the replication ECC was trying to confirm the target RFC destination(SRM) by prompting a logon. I logged in as myself and the system gave a CALL_FUNCTION_OPEN_ERROR.
I defined the CRM Consumer as SRM in the CRM middleware parameters..
My question is do we need to define the User SRM in SU01 and when ECC tries to confirm the target RFC destination, do we need to login as the SRM User ?
Points will be rewarded for answers.
Thanks in advance,
Bob

Hi,
The RFC user which you define in the SRM RFC detsination has to be obviously as SU01 user in SRM.Also the RFC user need to have SAP_ALL and SAP_NEW profile attached.See note 642202 for details.
Also Check:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/84/d3eb4190966024e10000000a1550b0/frameset.htm
BR,
Disha.
Pls reward points for useful answers.

Replicating authorization roles via HR replication from ECC 6 to SRM 5.0

Hi,
I'm interested in knowing whether anyone has used the distribution model to copy roles (AG objects) between ECC 6 and SRM 5.0.
Someone said that it's possible so I would like to validate that statement as I don't know whether it is possible and practical.
If you have any knowledge or experience could you please share it?
Regards,
Jerry

Hello Yann,
I was told that it can be done but I don't know enough about the HR replication process to acknowledge or challenge, hence the question.
Are you implying that it's not possible or simply that it's not done?
I had an earlier post regarding assigning roles to positions in SRM Replicating authorization roles via HR replication from ECC 6 to SRM 5.0 that you replied to but never replied to my subsequent question. It can be done because one of my other clients is doing it. We're however unable to get it work at my current client's site. Do you have any experience with this subject?
Regards,
Jerry

Questions regarding HR Org Structure replication from ECC to SRM

Hi Experts ,
We have SRM7.0 ( SP08) with ECC6 ( Ehp4) having Classic Scenario .
I managed to replicate entire HR Org Structure from ECC system to SRM system. I replicated O (Organization), S( Postion) and P ( Person), which successfully created O, S and CP in SRM with BP for O and US...Refered Note 934372, 312090, 550055 and help link on SDN./wiki.....etc
Now I have below questions in mind.
1. In SRM we requiers Org unit for Company Code, Purchase Organization and Purchase Group...which we set in FUNCTION tab for the requiered Org Unit with Checkbox and value of it and Logical system.....but in HR Org strcuture we do not have such Org Unit....so how to manage/create such these Org Units ( i.e.Company Code, Purchase Organization and Purchase Group ) ?...
Do I need to create these Org unit manually in SRM in PPOSA_BBP ? If yes, can I create these Org Unit above or between these replicated HR Org Units or I need to created it separtly in paralllel to these HR replicated Org Units?
2. If above I do, then what will impact on the delta /change replication from HR integraion ?
3. In ECC HR org Structure there are hundres of employee, out of that I just wanted to send the Postion ( we have postion based security in HR) whom only SRM Role had assigned . How it can be acheived ?
Will appricaite detail reply/suggestions
Thanks
NAP

Hi ,
Initially when I repliacted P of HR Org Struture it sucessfully craeted BP in SRM and was CP in Org Structure.
But suddenly , what happned don;t know, when I replicating Employees (P) in SRM , it is assigning to respective Postion (S), but BP is not creating in SRM and in the USERS_GEN for this User, its postion and ORg Unit to whom it assigned is giving below error
Determination of connections to object 'BP' of 'CP' '00000015' failed
Message no. BBP_UM_UI036
I checked all this as per Note 550055, 934372..etc....checked respetcive setting in table T77S0...I checked address alos....but no any clue......IDoC in SRM posting sucessfully....
Can anyone please suggest what should be the cause and solution of it ?
Thanks
NAP

Material replication from ECC to SRM

Dear SRM 7.0 Experts,
We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
Regds,
Cb

Have you checked the outbound queue in backend R/3 system ?
Have you defined the additional user in CRMCONSUM table apart from the CRM user?
Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
described in SAP Note 430980. See also SAP Note 720819.
Hope this helps you.
Regards
Abhijeet

Business partner replication from ECC to CRM

Hello community!
I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ECC, CRM, PI systems are registered in SLD.
And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
The thing that i cann't find:
What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
Thank you in advance, Dzmitry

The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry

Equipment Replication from ECC to CRM 6.0

Hi Gurus,
I am trying to Replicate equipments from ECC to CRM 6.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
Sharath.

Hi Sharath,
I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
I have done the following steps:
1. Created a category for the object family 0401 and assigned the relevant set types to it.
2 Maintained the settings for downloading equipments into CRM at:
SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
3. Activated BADI CRM_EQUI_LOAD
On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it. When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
Would appreciate if you could share how did you solve your problem.
Thanks in advance for the help!

Customer replication from ECC to CRM

Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PM

Hi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai

Problem in customer replication from ECC to CRM

Hi experts,
When I create a customer in ECC using Tcode XD01 a BDOC is created in CRM. But this Bdoc shows following errors:--
     Partner (): the following errors occurred
     Incorrect input data:
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
When I see the Bdoc message body the data(central data etc )is all blank except the field Object = BUSINESSPARTNER.
Why the Bdoc messae is not getting populated with correct value?
Also how I can see the data which is being sent from ECC. Is there any Idoc or something created at ECC outbound side where I can see the sent data?
Where in XD01 bdoc message is being created?
Please help.
Regards,
Vimal

Hi Vimal,
You'd need to debug the FM CRM_BUPA_MAIN_VAL to find out what was the cause of validation error. Once you get the missing details, check if those details are being populated correctly at ECC end.
Thanks,
Rohit

Delivery address replication from ECC to SRM

Hello All
We are onboarding a punch-out vendor in SRM. The Vendor said that they won't read the delivery address sent by us in the PO output, but would rather pre-store all the delivery addresses and their codes.
The code would be auto read & this way they can ship immediately with just 1 day lead time.
We are using classic scenario and noticed that when the PO is created in the backend, it always creates a new address number each time , even for the same address.
We are mulling about a process where the Ship to address would be created in ECC and replicated to SRM , with the same number as ECC.
So my question is :
1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
Thanks
Kedar

Hi Kedar,
1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
Ans : You can create delivery address in SRM from ECC by creating a Report and Utilizing RFC function module to read address
data from ECC and creating the same in SRM through FM BBP_BUPA_ADDRESS_ADD [i hope the FM is correct as i do not have the system now].
I dont know of any standard interface though ....
2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
Ans : Does not look possible to be .. since there are amny type of addresses in the system all uses the same internal number range. You can utilize some of unused field in delivery address to store the address number of ECC system like Building code , Street_suppl 3 etc ...
However i suggest do not make things complex and keep it simple.
Cheers
Iftekhar Alam

Issues in employee replication from ECC to CRM through ALE/IDOC

Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.

Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George

Business Partner replication from ECC to CRM based on Company code

Hi:
I got this requirement where we need to transfer customers from ECC --> CRM. Customers specific to a company code.
Trying to maintain Filters for CUSTOMER_main--> KNB1- BUKRS to filter customers by a certain company code. I get this error " Table not maintained in smoftables."
Checked table " SMOFFILFLD" to see there are no entries for KNB1.
While I could check with my superiors on restricting transfer of customers based on Sales area data, as KNVV and KNVP data is maintained.
I would like to know if I can proceed with adding new table KNB1 to this table. If this is not recommended kindly suggest one.

The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry

"Error in validation" in order replication from ECC to CRM.

Hi,experts,we always have a problem,that is the "Billed" status can not be replicated to CRM from ECC(We excute billing in ECC).
In the BDOC we always have error message "Error in Validation (Details: transaction SMW01)".
I found the preceding contract of the order had been locked by the middleware user.
Is it related with the BDOC validation??
Can anybody suggest?
Thanks.
Jerry

Hi,
Please unlock Queue using SMQ1 ( Outbound ) & SMQ2 (Inbound Queue)
First try using SMQ1 & SMQ2 in CRM then try in ECC.
Regards,
Rajendra Sonawane

Vendor replication from ECC to SUS

Hi Gurus,
We are replicating vendors from ECC to SUS.
The XML message is failing in the SUS side.
The error is
Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application
Please find below SXMB_MONI trace
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Program:
It seems similar issue has been resolved in the below thread but there is no mention of solution.
ABAP Inbound Proxy Error !
Please help in resolving the issue.
With Regards,
Malay

Hi Malay,
Kindly check if you have defined the logical system of SUS system under T-code SALE in your SUS client.
Regards,
Nikhil

Material Replication from ECC to SRM 7.0

Hi Experts,
I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
Errors:
Hierarchy for material types does not exist
(Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
MATERIAL: Object will not be loaded
Pl do the needful.
Regards
Mohan

Hi Pl check whether you follwed these steps are not.
Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Order replication from ECC to CRM

Hi All,
The requirement is we have different order types for example, ZOR, ZGW, KE in ECC out of which we would like to replicate only ZOR order type orders. So I used Adapter SALESDOCUMENT in CRM and set filters with AUART (Order type) EQ ZOR and ERDAT (Creation Date) GE '04/05/2010' so my assumption is if any ZOR order is created after 04/05/2010 they will replicate to CRM.
And I created transaction type ZOR in CRM and ZGW, KE are not created in CRM as I do not need them. I checked CRMFILTAB and the filters are there but the issue is:
Everytime I create ZOR order in ECC these order are replicating fine. There are 2 BDOCs generated R3AD_'CUSTOMER' and CSA_ORDER_'Order number' successfully...so far so good.
Whenever I create any order with ZGW, KE Orders, even these orders are trying to replicate to CRM and getting failed as we do not have ZGW, KE Order types in CRM. The BDOC is R3AD_XXXXXXX is failing with the following error messages.
-->Processing of document with Guid A6BE324C3C92B353E10000000AFEC80C is canceled
-->Business transaction type ZGW does not exist
-->Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
For example, if the order is created for customer 7719, In SMQ2, R3AD_0000007719 as failed and this is blocking all other 7719 customer related changes. How to make these other orders not even try to replicate to CRM and fail.
Please advise.
Thanks,
Sharath.

Hi Shekar,
Thanks for the Reply.
Here are my versions
CRM --- CRM 2007
ECC --- ECC 6.0
I know we are eligible for Scenario A but I haven't activated the Scenario A settings as of now. What we did was, we made the message in ECC from Error to Warning so that it'll allow us to change the order created in CRM. I wasn't aware of the scenarios during that time as I was new to CRM, recently I went through and need to activate them in the system.
In CRMPAROLTP Table, these are entries I have
CLIENT     PARNAME                                                          PARNAME2                         PARNAME3             CONSUMER
300          CRM_EXIT_BEF_DATA_TRANSFER                 CONDITIONS                       CONDITIONS              CRM
300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTACRMB                                               CRM
300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTAIPMI                                                   CRM
300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTAIPMO                                                 CRM
300          CRM_EXIT_CRM_GET_QNAME                         BUPA_REL                                                             CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUAG_MAIN               CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUPA_MAIN                CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUPA_REL                  CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  CUSTOMER_MAIN       CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  CUSTOMER_REL         CRM
300          CRM_FILTERING_ACTIVE                                 BUPA_HIERARCHY            BUPA_KNVH               CRM
300          CRM_FILTERING_ACTIVE                                 CONDITIONS                                                           CRM
300          CRM_FILTERING_ACTIVE                                 EQUIPMENT                        EQUIPMENT                  CRM
300          CRM_FILTERING_ACTIVE                                 MATERIAL                         MATERIAL                    CRM
300          CRM_FILTERING_ACTIVE                                 VEND                                 VENDOR_MAIN            CRM
300          CRM_NO_BEFORE_IMAGES                             SALESDOCUMENT                                                 CRM
300          CRM_RELEASE
Please let me know, if I am missing anything. Do you think activating Scenario A is important? I think my versions suite that I need scenario A, If I am not wrong.
Thanks,
Sharath.

BP replication from ECC

Similar Messages

Maybe you are looking for