BP replication not happening for a particular sales area.

The BP's created for one particular sales area are not getting replicated into CRM, though before sometime it was happening.
The BP with the "general data", and "role of sold to party" only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales area in the ECC, do not flow to the CRM.
However for other sales areas it flows.
Where should I look to resolve this situation. All entries in PPOMA etc are rightly made and untouched.
Thanks and regards,
Tariq

Hi
The BP's created for one particular sales area are not getting replicated into CRM, though before sometime it was happening.
DJ>> Hope the required sales area is available in CRM.
The BP with the "general data", and "role of sold to party" only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales area in the ECC, do not flow to the CRM.
DJ>> Please check the following -
1. Create a BP in CRM (with the sold-to party role) with the required Sales area and see if this customer when replicated to ECC has the relevant Sales Area. Ideally it should get replicated if all you middleware settings are fine.
2. See you have not set a filter for a specific Sales Area and becuase of that BP is getting replicate but not the sales area.
Hope this will help
Regards

Similar Messages

All the pricing conditions are not visible for a given sales area, material

Hello All,
There is a customized screen with sales area(Sales org, distribution channel and division), material and sold to party. There is buttton when we click it has to display the pricing conditions. The problem here is it is not displaying all the conditions some conditions like ZB02 and MWST are missing. The Function module used is PRICING.
Whereas in VA03 tranaction for a sales order created with this sales area, material it is showing all the conditions for a item.
Please help me to solve this issue.
Many Thanks,
Rama

Hi
The BP's created for one particular sales area are not getting replicated into CRM, though before sometime it was happening.
DJ>> Hope the required sales area is available in CRM.
The BP with the "general data", and "role of sold to party" only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales area in the ECC, do not flow to the CRM.
DJ>> Please check the following -
1. Create a BP in CRM (with the sold-to party role) with the required Sales area and see if this customer when replicated to ECC has the relevant Sales Area. Ideally it should get replicated if all you middleware settings are fine.
2. See you have not set a filter for a specific Sales Area and becuase of that BP is getting replicate but not the sales area.
Hope this will help
Regards

How to remove Requirement of SL in Delivery for a particular Sales area

Hi Friends
I have customised supplementary order type, delivery type and billing type. In supplemntary delivry item category, the relevance for picking, storage location required, determine storage location, fields are unchecked. It works well with a particular customr and for a particular sales area, particular materials. In delivery, we have PGI and saved delivery. Delivry did not have picking and it did not ask for any storage location.
But when I am trying to create the same supplementary order type for a different customer and different sales area and scrap material, the delivery has no picking but its asking for storage location to do PGI. Pls tell me what I have to do to remove the requiremnt for storage location in delivery for this particular sales area.
Thanks
sangeeta

Hi Bhaskar
In VL01N, in delivery item, for scrap material, item category is coming as ZSUP. Because the item category for delivery is also maintained as ZSUP. In this Item category, the fields mentioned below are deactivated.
Relevant for picking
SLOC required
Determine SLOC
In material master for scrap, in Sales org2, item category grp is NORM, like all other material.
Thus storage location is not supposed to come in VL01n as a required field.
But in delivery item category determination, i did not find this item category zsup. But when I was making supplementary delivery for other materials, the system did not ask any storage location and supplymentary delivery is duly created. here we delivering from an order not SA.
Thanks
Sangeeta

Idoc not created for a particular sales order

Hi,
For a particular sales order , idoc is not created .
The idoc has to be generated when we create a sales order ,
but for a particular sales order , the idoc is not generated when the sales order is created. The program is assigned in
nace for output type zd00.
RSNASTED is the program which triggers the idoc and FM: IDOC_OUTPUT_ORDRSP.
How to debug and see why the idoc is not generated,
i had kept break point in idoc_output_ordrsp function module
and program rsnasted, but my control does not
reaches this point.
can anyone help me in this issue.
Thanks and regards,
A. thirumaran.
Edited by: thirumaran a on Jul 22, 2008 1:35 PM

Hi,
Could you please check if the output is processed or not, whether in the output type what all conditions you have maintained e.g send immediately.
Reward me point if you find this helpful.
regds.......
Sumit

Repeat credit check does not happen for already released sales orders when CMGST =D, for the second time using FM SD_ORDER_CREDIT_CHECK

Hi,
I have written a routine which will call the FM SD_ORDER_CREDIT_CHECK whenever there is a rejection and again unrejection of a same sales order, we are only concerned about already credit released sales orders, the scenario is as follow
1). Sales order created in the system --> Credit check --> Credit blocked
2). Release credit block manually CMGST =D
3). Reject sales order then unreject the same
4) Routine will determine rejection and unrejection of the order while saving and will call the FM SD_ORDER_CREDIT_CHECK
5) The order is credit checked and blocked if necessary
All goes well till this point
but when the same sales order is rejeceted and unrejected multiple times either partially/ fully then the Custom routine calls the FM for credit check but the FM fails to put the order back on credit hold
in short the FM works only for the first time incase of mutiple rejection and unrejection of teh same sales order then the FM SD_ORDER_CREDIT_CHECK fails to put the order back on credit hold from the second time onwards
if some one any idea of the behavior of this FM please share your thoughts and inputs . thanks !!

Issue resolved
The Standard FM “SD_ORDER_CREDIT _CHECK” uses the field “Release date of the document determined by credit management VBAK – CMFRE”
For any sales order that is manually credit released in a single day, Only one credit check is triggered (per day) if there is any change in the sales order and then the order goes back to credit hold and if again the order is manually credit released for the second time in a single day there will be no credit check (still the order will pass into FM but the update entry in the internal table will be blank)this is a standard functionality
Process of rejection and unrejection :
Blocked order -->released-->blocked again (first time after manual release same day) unrejected (same day) -->but no credit check (all this in a single day)
note : OVA8 - released document still unchecked = 0 Days , Deviation %= blank

Want report to display Sales Life Cycle for Particular Sales Area

Hi all,
What are the select-options,parameters and tables for the report sales life cycle for a particular sales area and if possible send me the code for the same.
Thanks in advance
Santosh R

Hi Sandy,
You would probably be better to post this in Crystal Reports Design forum category.
You could add a unjion into the data source so that it always returns a dummy row for each category.
Regards
Alan

Automatic Batch Determination is not happening for New Sales Order Type

Dear Experts,
I have created a new sales order type ZBPY - For Free Sales, but automatic batch detrmination and batch pick up is not happening for new sales order type, but it is activated for all the other sales order types in Production Server, can any body let me know the steps how to map this new order type to batch management and let it behave like other order types.
Thanks in Advance.
Saravanan(EKS).

Hi Saravanan,
Kindly check the following steps for automatic batch determination.
1. First check the material is maintained with batch in the warehouse management.
2. Maintain new entry for search procedure for batch determination with the new created doc type.
3. Maintain new entry for automatic batch determination for sales order or automatic batch determination for delivery ( This depends on the business process of our client, whether they want to determine the batch with sales order or at the delivery level. check this and make new entry)
4. Create Batch using T.code MSC1N with proper date of manuf. and SLED.
5. Create Batch Search Strategy using T.code VCH1 with proper strategy type.
6. Maintain stock with active batch. check this with t.code LS26 or LS24.
regards
Ravishankar M

Preventing update to COPA tables for a particular Sales order type

Hi ,
We need to have incoming sales order transfer to COPA activated only for one particular sales order type activated.
Earlier we implemented note 571697 for user exit to allow COPA update only for particular sales order type.
This prevented the transfer of SO to actuals table, but off late the performance for VA01 and VA02 has decreased substantially.
Upon checking, we found this is happening because of other CE4XXXX tables (excluding CE1XXXX) which are getting updated during creation/ change of SO. as the data in these tables is huge .
If possible, please advise, right userexit to prevent update to these tables.
Thanks.
Neeraj

Thanks for your inputs..I have few more queries on same.
Initially we had incoming sales order activated in KEKF allong with implemented SAP note 571697, which helped us to update CE1XXXX only for a particular sales order type. This was initial requirement to have system updating COPA values only for one particular sales order type.Also, KEQ3 was also activated which resulted in updates to CE4XXXX. This was not a problem initially since we had few sales orders now that plant has grown old with more sales order (resulting in huge size of CE4XXXX) VA01 is impacted..
Currently ,since we have KEQ3 activated so, Segment is created the moment we create sales order.. and table CE4XXXX is updated..
As most of you have suggested to switch off sales order in KEQ3, i need to analyze the impact of this..
From what i understand CE1XXXX will continue with updation for that order type... and CE4XXXX won't be updated in future..Please correct me if i am wrong..
Also, please advise what all can be possible impacts on COPA reporting if I switch off from now onwards (client has been using this since long) , and what all should be the precautions that i should take while doing this.
Thanks

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Reverse replication not implemented for action:

Hi, we see a persistent error reported in our replication log:
Reverse replication not implemented for action: TEST. Remote outbox path: /var/replication/outbox/1338320761214
The node mentioned has cq:repActionType = TEST.
The consequence is that this aborts the replication of nodes in the publisher node and our author and publisher seem out of sync because of that. Is this something anyone has come across before. How to prevent this?
If I delete that node in the outbox it seems to resolve the issue, but I'd like to know what caused it to appear in the first place to make sure we don't end up seeing this issue in our production environment.
Any help is greatly appreciated.

I don't remember exactly when the TEST nodes are created but they are only when some tests are run.
When it happened to me I had to delete once and then it never happened.
D.

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

Payment terms for a particular sales order

Dear Gurus,
I want to trigger a particular payment term for a particular sales document type.
i.e., when i create a sales order with this particular sales document type the desired payment term should be copied into sales order by default. Is this possible.. please suggest.
thanks
suri

Dear Suri
As you would be aware, by default, Payment Term will flow in sale order from customer master. However, if you want to have a different payment term to flow automatically, then you have try with any of the following user exits.
User exits in the program MV45AFZZ - USEREXIT_READ_DOCUMENT
User-Exits in program MV45AFZB - USEREXIT_CHECK_VBAK
thanks
G. Lakshmipathi

Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

Link does not work for
End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
How do we get Cisco to fix?
see attachment

Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

Some times firefox does not opens facebook and google pages and this does not happen for other sites. Iam Currently using windows xp and using 3.6.3 Firefox version.Please help.

Some times the fire fox does not open google and facebook pages but it does not happen for other sites. Iam currently using Windows xp and iam using Mozilla Fire fox 3.6.3 .Please help
== URL of affected sites ==
http://www.facebook.com,www.google.com

You can try a direct connection and select No Proxy in the connection settings.
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
Also do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

BP replication not happening for a particular sales area.

Similar Messages

Maybe you are looking for