BP Role CBih10 doesn't exist for transaction CBHR11

Hi All,
I'm temporarily looking after EHS modules and I'm getting an error message saying "BP role CBiH10 doesn't exist" when using transaction CBHR11 or CBiHt1
I look at the config and the CBIH10 does exits in the Business partner role table.
Any ideas what I should look for?
Regards,
Francois

Hi All,
We found the problem. Some transports were put through in our Treasury area and it wasn't communicated with the rest of the department which overwritten the other config.
Regards,
Francois

Similar Messages

BRAIN 627 (Variable value doesn't exist for Char.) since upgrade to SP15

Hello Gurus,
We upgraded our DEV BI 7.0 system last week from SP12 to SP15 and we experience a problem in some workbooks:
Whenever I try to refresh or switch to the Design Mode, I get the following errors message:
BRAIN 627 : Variable "Calendar Month Year Interval" value "2006.01" doesn't exist for Characteristic [0CALMONTH in that InfoSet].
I found that the OSS note 1111256 corresponds to this issue, but the only solution mentionned is to import SP17.
Isn't there another way to implement this correction directly before waiting for the SP17 (knowing that even SP16 is not available yet)? This is a big issue for us, as we can't refresh some of our workbooks.
Any help would be greatly appreciated.

Hello
You mean to say that you are encountering this issue only in some workbooks and not all workbooks. Are all these workbooks written on queries on the same infoset?
See if the mapping in the infoset is causing this issue.
Hope this helps

TAX CODE doesn,t exist for jurisdictin code

hi
while posting the GR, when selecting taxcode it is giving message " TAX CODE V1 DOES NOT EXIST FOR JURISDICTION CODE 2200 "
i have defined jurisdiction code under costing sheet( tax procedure) and tax code for jurisdiction code. then entered in screan in excise invoice detail in header and item tabs (in head in invoice tab, no excise invoice showing )
thank you
sowmya

hi all
i have already did all the things you people said.
1. I have already assigned company code to tax code.
    in "tax on goods movements"
2. I have already defined "MWVS" condition type in "FV11"
      which is the link between taxcode and country.
3. And "JMOP" offcourse, is the basic excise duty condition, I have already
    defined in "FV11"
But still getting the error
please help me
regards
anand.

FIFO doesn't work for transactions in the same second

I have order dependant transactions going into an A.Q in a 8.1.7.4 database.
The default priority is based on time. ENQ_TIME
wgich is a date field. I have transactions going into the que in the same second. They are not comming out in the correct
order when this happens. Oracle 9i v2 supports a more finite timestamp, but when I create a que table in 9iV2,
it still uses the date column type. Has anyone seen this? any workarounds would be apprecieated.

Hi Eric,
If you have specified ordering to be ENQ_TIME, PRIORITY, AQ guarantees that messages enqueued in the same second in the same
session would be FIFO ordered. However, if the messages are enqueued in the same second from different sessions, there is no
ordering guarantee b/w the messages. The workaround is to use Priority. So, priority would determine the ordering for the messages
enqueued in the same second. It would guarantee the right order.
cheers,
Brajesh.

User Exit Doesn't Run For Transaction KE26

Hi Gurus,
I have a requirement in which when i use the transaction KE26, i need the User Exit EXIT_SAPLKEII_002 Enhancement
COPA0005 to run. Using the Program for finding out the user exits for a particular transaction i found out this exit . but when i use ke26 this exit is not activated .Plz Help.
Thanks in advance.

The program you use give the Customer Exit (or BADI) for the development class of a transaction or program. Its only a tool, an exit can belongs to another dev class than the transaction and an exit of the same dev class may not be called by the transaction.
- Look at dev class KE with SE80, there are a lot of transactions in this class.
- Look at function group XKKE, there are some exits here.
Regards

Why does Firefox require a Plug In for Windows Media 11 and it doesn't exist for Windows 7 Ultimate 64 Bit

I wanted to listen to an Internet Radio Station and every time I clicked the listen now button on that site, Firefox tells me a Plug In is required for Window Media Player 11 so I follow the link to be told it is a manual download. When I get to the download site, I cannot find a Plug In download that is suitable to Windows 7 Ultimate 64 Bit so, I cannot listen to the radio station I want too and would like to know if there are any other options.

You can use the new WMP plugin for XP/Vista as well on Windows 7 with WMP 11.
See:
*[[Using the Windows Media Player plugin with Firefox]]
*http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

Genius mix in itunes doesn't exist for me

I dont see the "genius mix" option as stated in the help documentation in iTunes"
Play a Genius Mix
Choose Music from the Library pop-up menu, and click Playlists.
Click Genius Mixes.
To start playing a Genius Mix, move the pointer over the mix you want to play and click .
I do not have any genius mix options to choose. How can i get this back? I used to have it in pervious versions of iTunes.
Yes , genius is turned on, Is updated, and I can make my own genius mixes from individual songs, but the iTunes Genius mixes are not showing up. The ones it makes for you based on your music library.

I have been having same problem. Last week I uninstalled itunes and quicktime and then installed standalone QT and then itunes. iTunes worked for one day. Then tonight I tried to open itunes and back to the same problem, itunes will not open. QuickTime will open and run alone but no itunes. I have worked on this for several days now. So any new ideas would be great.

QM info record doesn't exist for material

Hi Guru's,
While creating PO's I getting this error - No Info record in QM for this material supplied by the vendor.
How to check this whether the material is having inforecord?
What t-code I need to use?

hi
it is the wright T code QI01 or follow the path QM>Quality Planning >Logistics Master Data >Quality Info Record: Procurement >create
regards
thyagarajan
or you can use QI06 for displaying the info record
Edited by: thyagarajan krishnamurthy on Jun 7, 2008 11:10 AM

BAPI for transaction CJ30 ?

I wanted to know if any BAPI/BADI exists for transaction CJ30 .
Thanks in advance .
Ambar .

Refer to this thread
Bapi for CJ30
Re: BAPI for CJ30

Contact Person doesn't exist in BP for transaction

Dear all,
I am looking for suggestion on how to enter Unknown contact person in Activity or Opportunity transaction
without triggering any error message by system.
Currently, when we enter contact person which doesn't exist in Business Partner master data, the
system then triggering an error message saying that this BP doesn't exist ! (for example Contact Person is
Mr. AnyOne)
Side effect of this is we cannot do further document Follow Up (like for example from Opportunity
to Quotation) because the document (Opportunity) is still contains error message.
I found similar question on SDN but it is not satisfying with the answer.
Appreciate your help. Btw, I am using CRM2007, any clue to enhance this in UI level also appreciated.
Cheers,
Gun.

Hi Gun,
Have you Set the Checkbox for "Mapping/Defination for the Partner which searched" and what have you set in the same???
This field allows you optional; search for Alternate Buisness Partner
Indicates whether or not mapping of partner functions occurs during partner determination.
(Leave this field unmarked to specify that mapping does not occur.Mark this field to specify that mapping occurs.If you mark this field, the system displays additional required fields where you must specify how mapping takes place.
Example 1: No mapping
Normally, the system searches for the partner function to which an access sequence is assigned.
You assign an access sequence, with the source preceding document, to the partner function ship-to party.The system looks in the preceding document for a ship-to party.It enters the ship-to party from the preceding document as the ship-to party in the current document.
Example 2: Mapping
Mapping means that the system searches for a partner with a partner function that is different from the one to which this sequence is assigned.You create an access sequence, with the source preceding document, and mark this field, Mapping.The system displays several additional fields; in one you specify the activity partner as the partner function in the source.You assign this access sequence to the partner function ship-to party.The system looks in the preceding document for an activity partner.
It enters the activity partner from the preceding document as the ship-to party in the current document.
For more information on mapping, see the documentation for this Customizing activity, Define Access Sequences.
Else you may achieve the same using BADI by defining a Rule for Normal Detrmination of the Buisness partner Initially else Determination of the same from another Field from the Transaction.
Hope it Answers your Queries...
Thanks and Regards,
RK.

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

Transaction AFAR doesn't check for authorization

Hi,
I've added transaction code AFAR in one of the role that has Check/Maintain for authorization object A_PERI_BUK which should restrict on company code. Ive even check the associated program RAAFAR00 which has the authority chekc statement.
But, when I restrict the access to a specific company code in the role, the transaction is still allowing the users to execute it with other company codes. User doesn't have any other roles assigned and all the other tcodes such as AFAB, AFBP are giving authorization errors.
Can some one help!!
Regards,
Raghu

Hi,
it is not throwing failed authority check error but should work just fine.
    AUTHORITY-CHECK   OBJECT 'A_PERI_BUK'
                      ID      'AM_ACT_PER'      FIELD con_31
                      ID      'BUKRS'           FIELD x093c-bukrs.
    IF sy-subrc NE 0.
*       WRITE: / text-f08, x093c-bukrs. commented by C5053255
      CONTINUE.
    ELSE.
*      Rücklesen des eingegebenen Geschäftsjahres pro Buchungskreis
      p_gjahr = sav_gjahr.                                  "> 627533
    ENDIF.
CONTINUE statement executed in case of failed authority-check causes loop to skip processing for this item ... so only elements for which user has proper authorizations are processed. Try debugging to confirm
Best regards,
FS

ODS Activation Failure due to Number range object for char doesn't exist

Hi
I am having problem regarding ODS actvatn, My oDS is gttng fail due to number range for char object doesn't exist.
error when checking sid for ODS.
I have made all tests in RSRV for dat Infoobject
can any one suggest me ...........
points will be assigned
kindly mail me 2 [email protected]

Hi,
chk tis blog.. hope it clears wat buffering is
/people/vikash.agrawal/blog/2006/04/05/load-lots-of-data-147faster148-with-buffering-number-range
What is buffering number range:
Buffer the Numbers ( which system picks up from database -in case of Master Data SIDs & in case of Transaction Data Dimension Ids) and use these buffered numbers rather than hitting the database (for each new master data records or for each new combination of SIDs to create a new Dimension Ids). So the concept is
SID Number Range can be Buffered Instead of Accessing the Database for Each SID
Hope its clear!

DataSource for 0SD_C02 doesn't exist in Source System

Hi Friends,
I think the title explain all the problem.
I want to load the 0SD_C02 infocube and I know that I have to do it with the infosource 2LIS_01_S005, but when I go to R/3 to search for it, the system tells me that it doesn't exist.
I've proved with the Tcode RSA3 to verify the extractor and it gives me the same answer "Infosource 2LIS_01_S005 doesn't exist in Source System".
Does anybody know how to load this infocube?
Thanks in advance.
Francis.
Following with the same problem.
I want to load data on 0SD_C02, 0SD_C03 & 0SD_C05. C03 & C05 has datasources named like 2LIS_11/2/3... I have these ones in R/3, but the datasources named like 2LIS_01_* aren't exist in R/3,
How can I load data in these infocubes?
Thanks in advance,
Francis.
Message was edited by:
Francis Estevez

I think you have to install it via RSA5 transaction in your source system...
Hope it helps!
Bye,
Roberto

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. How do I fix this?

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

BP Role CBih10 doesn't exist for transaction CBHR11

Similar Messages

Maybe you are looking for