BP Role field in UI

Hi
In UI i need to create BP with roles Prospect and SP. But i am not able to find BP Role field in UI .
Please let me know how to over come from this problem.
Thanks In Advance
Regards
Ahmed

Hi Ahmed,
You would need to add this assignment block to the UI.
To do this, click on the 'Personalize' button ( you can see this as a small square on the right side of the screen - beside the Print and Help buttons ).
On clicing the personalize button, a pop up opens that show you all the available assignment blocks and displayed assignment blocks. Just select the 'Roles' block, and then transfer it to the right side column using the 'Move to right' button.
Then press Save / Apply .
This will add the Roles assigment block to the UI.
Best Regards,
Rishu.

Similar Messages

Reconciliation - Roles Field

Hello Experts,
     I would like to know, how can I verify or see the updated roles in OIM Admin Console after doing reconciliation?
     I mean, suppose I have assigned few roles to a user existing in both target system (SAP EP) as well as in OIM.
     After doing recon, how can and where should I cross check the updated roles?
     I am not getting mapping details of roles related fields neither in Process Definition nor in Reconciliation Manager.
     Can anybody tell me what mapping nedds to be done at OIM side so that I can see the roles mapped to the user?
Thanks

I have never used this specific connector but if you can trust the connector docs (which you often can't in OIM but perhaps the SAP connector docs are better than average) you need to do the following. I am also assuming that you are running the connector in non trusted mode:
1. Check that the Lookup.SAP.EP.Roles is populated with the correct values. It seems like the scheduled task SAPEP LookupRecon does this for you.
2. Run the main recon (SAPEP UserRecon) correctly configured (see section 3)
Assuming that you configured everything correctly you should now see the roles of the users in the child table for roles that is attached to the process form.
Good luck
/M

LEAD PARTY ROLE MISSING FIELD

Hi everyone
               I have entered involved party in Marketing work center >> Lead menu and from this involved party with also i have entered party role
but when i am going to make report on this involved parties in lead menu i got issue inside business object .
     I got all parties which i have entered in lead menu but i have not got it party role into the report .
I have also checked Test shell for business object menu, but there also not any party role field found in Business object .
     Where party role has stored in which field at Lead business object .please guide us.
I have entered party role in lead screen shot
Please guide us.

hi ,
thanks a lot
I tried all the solutions given by you ,but its not working.
I will state the problem I am facing clearly:
I chose a 'person ' or 'organisation' and created a BP.After that I wanted to give him Sold-to-Party role.
When I choose sold-to-party role I should get 'sales area data' button next 'general data' button.That button is missing for me.

AET error while creating a new field

Hi Experts,
We have a requirement to create a check box/newfield on Account Details screen in Web UI. I am trying to create a new field using AET but am getting the following error message. Please help.
1. Error during generation of object CI_EEW_BUT000
2. Customizable CSOL conflict for objects changed in other TR.
We have a config TR involving the role field on account details component (BP_HEAD/ACCOUNTDETAILS). Do we need to release the transport before creating any new fields.
The generation of the field fails when I select the extension and click on 'SAVE and GENERATE'.
Please help.
Thanks,
Rohit

Hello Rohit,
Please apply note 1707978 to solve the issue.
thanks
Willie

Error occuring on a lookup field in profile page

Hi All,
I have a lookup field on the OIM 11.1.1.5.0 create user page. The create user form was working fine and I was able to create users properly. However since today morning, suddenly I am getting a strange error whenever I click on the lookup field to select any value. The query for lookup has not been changed. Its the same as before. But this error keeps popping up on UI directly and then am not able to do anything unless I restart the browser.
The error is as follows:
ADF_FACES-60096:Server Exception during PPR, #8[[javax.el.ELException: java.lang.AbstractMethodError: prepareWhereClause
Caused by: java.lang.AbstractMethodError: prepareWhereClause
Can some one please help me out with this? The only change that I remember was I had changed OIMServer.jar file with another version but I have re-stored the original file which I had a backup of. But it still throws this error.Thanks,$id

Hi,
I increased the log level of the oracle.adfinternal to TRACE-32. I can see the following additional things in the logs after the 60096 exception that arises when I click on the Search button in the user role field:
[2013-01-01T11:16:16.585+01:00] [wls_oim1] [TRACE] [] [oracle.adfinternal.view.faces.lifecycle.LifecycleImpl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [SRC_CLASS: oracle.adfinternal.view.faces.lifecycle.LifecycleImpl] [APP: oim#11.1.1.3.0] [SRC_METHOD: _executePhase] [URI: /admin/faces/pages/Admin.jspx] Executing phase RESTORE_VIEW 1
*[2013-01-01T11:16:16.609+01:00] [wls_oim1] [TRACE] [] [oracle.iam.identitytaskflow.logging] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [SRC_CLASS: oracle.iam.taskflows.utils.CommonUtils] [APP: oim#11.1.1.3.0] [SRC_METHOD: getCustomProperty] [URI: /admin/faces/pages/Admin.jspx] Cannot find the resource global.Lookup.UserRole in the bundle.*
[2013-01-01T11:16:16.609+01:00] [wls_oim1] [WARNING] [] [org.apache.myfaces.trinidad.component.TreeState] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [APP: oim#11.1.1.3.0] [URI: /admin/faces/pages/Admin.jspx] Saved child count does not match current count (was 2, now 4)
[2013-01-01T11:16:16.610+01:00] [wls_oim1] [TRACE] [] [oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [SRC_CLASS: oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [APP: oim#11.1.1.3.0] [SRC_METHOD: pushContextChange] [URI: /admin/faces/pages/Admin.jspx] Context change about to be pushed. Current stack size: 0
[2013-01-01T11:16:16.610+01:00] [wls_oim1] [TRACE] [] [oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [SRC_CLASS: oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [APP: oim#11.1.1.3.0] [SRC_METHOD: pushContextChange] [URI: /admin/faces/pages/Admin.jspx] Context change about to be pushed. Current stack size: 1
[2013-01-01T11:16:16.610+01:00] [wls_oim1] [TRACE] [] [oracle.adfinternal.controller.application.AdfcPageResolver] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [SRC_CLASS: oracle.adfinternal.controller.application.AdfcPageResolver] [APP: oim#11.1.1.3.0] [SRC_METHOD: getPhysicalURI] [URI: /admin/faces/pages/Admin.jspx] ADFc: viewId [LookupByQueryPopup-TF/LookupByQueryPopup] resolved to [taskflows/lookupbyquery/LookupByQueryView.jsff]
[2013-01-01T11:16:16.610+01:00] [wls_oim1] [TRACE] [] [oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [SRC_CLASS: oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [APP: oim#11.1.1.3.0] [SRC_METHOD: pushContextChange] [URI: /admin/faces/pages/Admin.jspx] Context change about to be pushed. Current stack size: 2
[2013-01-01T11:16:16.610+01:00] [wls_oim1] [TRACE] [] [oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [SRC_CLASS: oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl] [APP: oim#11.1.1.3.0] [SRC_METHOD: popContextChange] [URI: /admin/faces/pages/Admin.jspx] Context change about to be be popped. Current stack size: 3
[2013-01-01T11:16:16.611+01:00] [wls_oim1] [NOTIFICATION:16] [] [oracle.adfinternal.controller.util.LogUtils] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [APP: oim#11.1.1.3.0] [URI: /admin/faces/pages/Admin.jspx] Key mismatch: expected Process Region but got JSF Phase %s
[2013-01-01T11:16:16.611+01:00] [wls_oim1] [NOTIFICATION:16] [] [oracle.adfinternal.controller.beans.ManagedBeanFactory] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 004oZTf^PWj1baXh1tnJ8j0002mn000WN_,0:1] [APP: oim#11.1.1.3.0] [ADF_MESSAGE_CONTEXT_DATA: Bean Name=shellRequestContext;#;Bean Class=oracle.idm.shell.context.ShellRequestContext;#;Bean Scope=request;#;Taskflow Id=null] [ADF_MESSAGE_STATUS: begin] [ADF_MESSAGE_ACTION_DESC: ] [URI: /admin/faces/pages/Admin.jspx] [ADF_MESSAGE_ACTION_NAME: Instantiate Bean] Instantiate Bean
I am not sure if the line in bold saying cannot find resource global.Lookup.UserRole is the root cause or not. But if it is, then any idea what might be causing it? Can it be related to the OIMServer.jar replacement I had done earlier?
Thanks,
$id

Possible values of an account role are missing

Dear SAP Collegues, I'm working with CRM 7 and I have a problem updating some fields of the account.
In GUI we can change the role of the BP, now in UI at the ROLE assignment block I can't see the possible values to assign to the bp as a valid role. The configuration in SPRO is ok and I can see the values in the GUI but no in the UI. The role field doesn't show a match code.
Thanks in advance by your help.

Thanks for your answer Christophe. I read the note but the same does not apply since I'm not using the functionality of the life cycle of the account. There are currently no set group exclusion. The problem appear when I'm trying to assign a new role. In Accounts at the assignment block named ROLE I can see the current role but I can't add a new one since the values are not showed and the match code is not visible too.
In SAP GUI BP transaction the behavior is the expected.
I am working on CRM 7.0
Edited by: Jorge Anzola on Sep 2, 2011 2:39 PM

How to find out if a query(report) has a role.

I want to find out if a query(report) has a role and what the role name is.
Do anybody know a function or a table?

goto SU01 , give ur username , click on roles tab , and click F1 on role field , then goto technical attributes , and use where-used-list of that dataelement , u will lot of tables on Roles and its attributes
You can look up AGR* tables in SE16
Please give me reward points if it is useful.
Thanks
Murali Poli

FM that retrieve the inner authorization object BBP_ROLE using user's role

Hi Experts!
Do you know what Function Module can be use to retreive the inner authorization object BBP_ROLE using the user's role
e.g. BUYER : YT:PU:XXXX:BUYERROLE
Object       : BBP_ROLE      SRM: User function / Role
field name : BBP_ROLE      SRM: User function / Role
Activities
Sel      Activity      Text
x       EMP             Employee
x       OPP             Operational Purchaser
......etc
Thanks!

Hi
Execute Txn S_BCE_68001414 in debug mode, and figure out how system takes the inner authorizations through the flow of this program
Regards
Virender Singh

What FM retrieve inner authorization object BBP_ROLE using the user's role

Hi Experts!
Do you know what Function Module can be use to retreive the inner authorization object BBP_ROLE using the user's role
e.g. BUYER : YT:PU:XXXX:BUYERROLE
Object       : BBP_ROLE      SRM: User function / Role
field name : BBP_ROLE      SRM: User function / Role
Activities
Sel      Activity      Text
x       EMP             Employee
x       OPP             Operational Purchaser
......etc
Thanks!

Hi
Execute Txn S_BCE_68001414 in debug mode, and figure out how system takes the inner authorizations through the flow of this program
Regards
Virender Singh

Modifying the Ad-hoc Query Infoset : problem with P9105 fields.

Hi all,
Am having problem with Infoset of Ad-hoc Query .
i need to add the Critical role Field Group to ZHR_PA_01 Infoset of Satandard Area.
for this i have imported that Infotype 9105 and included the following standard fields by drag and drop.
                1. Role Category
                2. Role SubCategory
                3. Global Identifier
                4. Personnel Number
and then Saved and Generated the infoset succesfully.(No syntax errors)
But
While testing, using the T-Code: S_PH0_48000510
if i select one of these above fields for the report,
Am getting the message that "Error when generating the report".
Error Description:The report cannot be generated because the internal description is invalid or incomplete.
means what may be the problem.?
if i select other fields its working fine.
can any body explain me clearly..??
Regars,
Kalam A.

Hi Manoj,
yes, i have saved the T-code.and generated the Infoset Succesfully.
and its showing the those additional fields while testing.
for remaining fields its working fine.
but am not getting wats problem with the four fields of P9105 infotype.
could you please suggest me.?
Regards,
Kalam A.

CRM Portal Role Copier

Anybody used this tool?
A portal role is linked to a backend single role. SAP ships several standard portal roles / backend single roles specific to CRM.
Since the CRM Portal Roles hyperlink between several portal iViews / PCUI applications within the Portal (this is setup in the backend on tables crmc_prt_role_mo & crmc_prt_role_rl). To make things easier there is a role copied on the Portal (crm admin role)
But I've tried using this by copying a crm backend single role and portal role that exists to a new single backend crm role and portal role. So far hasn't work
The documentation says make sure the single role and portal role exists - are they talking about the destination role?
Also mentions addition to desitnation role field - what's this?

To keep it clear ,using role copier copy CRM backend role to custom role whatever created on portal .Once portal role is generated assign that to user profile to get the object links .
Thanks,
Thirumala.

Role and Reverse Role

Can the Role and Reverse Role fields be removed from the account competitor view? Thanks.

You can hide the Role fields in the Account Related Information Layout, which a user will see from the Account view. However, the fields are required, so when creating or editing a related account, users will have to see the fields. You can pre-default the values to make it easier for users, though.
Good Luck,
Thom

In Roles Menu only Tcode Description is showing instead of Tcode Names.??

Hi,,
When tring to see all tcode by their name assigned to user in a Role ,only description is coming instead of Tcodes names.
Please help me to get Tcodes name with their description in Role Menu.
waiting for your valuable response.
Best Regards.
SHUBHRA

Hello,
Goto to PFCG tcode, put the role you want in the roles field and enter into the role by clicking the Display or Change button.
Now you will be in the Description tab, switch to Menu tab and here you will see the Tcodes with descriptions, now in the Menu tab, you can see a button called switch technical names. This button will be like the search button in Windows, a glass with handle.
Hope this helps.
Regards,
Yoganand.V

SRM RFC users for ERP , what are the profile/roles should be used?

Hi All,
I have integrated SRM and ERP systems using config wizard. Multiple rfc accounts were created automatically by the wizard but what i did was i skipped on the profile and role field because i don't know what to put. Now, I am battling on what profiles and roles should i put there since the wizard didn't do the automatic placing of authorizations and roles for me.
here are the users that have been created automatically by the config wizard.
ERP System:
SRM2ERP
SRM2ERPD
ERPLOCAL
SRM System:
ERP2SRM
ERP2SRMD
SRMLOCAL
Please help on what ABAP Roles and Profiles should i place to it.
Regards,
Tony
Edited by: Tony on Jun 9, 2011 12:34 PM

Hi ,
The user should have profile SAP_ALL assigned automatically when you run the CTC script.
Else please assign manually.
Regards
Sam

Role Create and Update Workflow

I'm trying to use the ROLE FORM in a developed role management process to create or update roles. Although all my standard role fields come up, we're running in to several issues:
1. the form doesn't list the new resources in the formtable (showing resource name, type, button) after adding or removing new resources and the form refreshing, and
2. clicking the set attribute buttons does nothing but cause a form refresh, the next page is never displayed.
Has anyone else run into this or know what may be causing the issue?

No, for several reasons. We're on version 7, and we have some other issues we have to work around. Thanks for the suggestion though.

BP Role field in UI

Similar Messages

Maybe you are looking for