BP ROLE TRANSPORTS
Hi,
I have created new BP roles in "development" by copying the pre defined SAP roles.
When we transported the roles to Testing server, roles have been reflected in the transaction BUSD, but the dependences have not been transported. The roles have not been replicated in BP.
Could any one suggest what would have went wrong.
Thanks in advance
Vamsi
Hi Vamsi,
Transporting roles will not transport dependencies.
You have to manually add all dependencies in a request and then transport this request to the testing server.
Regards,
Bapujee Naidu
Similar Messages
-
Role content different from one AS to another after a role transport
Dear all,
I have a trouble after a simple role transport in the production system. The PROD system is built with one CI and 5 AS. (System ECC 5.0 kernel 6.40)
After a transport role, the changes are not replicated on all aplication servers in PFCG. For ex. once connected on the Application Server 1, the TC CK11 is well added to the role Z_Role; but when I'm connected on the AS 2, the content of the role Z_Role is different (the TC CK11 is absent).
Is someone have an idea?
Thanks,
FabriceSounds like a bug, or there are some buffers which are corrupted.
Is this a very large role, or do the users have other very large roles?
I will move this to the NW Admin forum first, to see what they think of it - as I suspect that it is a server administration difference between the appservers.
Cheers,
Julius -
PFCG - Role Transport button inactive
Hi All,
We perform role transport as usual but notice that the button has been greyed out. Same goes for mass transport. Both the button are inactive.
Does anyone have solution for this issue?
Thank you
jyakiHi Jyaki,
Are there any recent changes made in the system? If the issue is due to missing authorizations, it should display an authorization error when you click the button, but should not grey out the button/options.
By the way, do you have GRC ERM configured in your landscape?
Regards,
Raghu
Edited by: Raghu Boddu on Aug 24, 2011 11:05 AM -
Hello,
I transported Roles (BI 7.0) by collecting objects in Transport connection to QA system, but I eneded up regenerating profiles for all of them. Is this is normal?
OR is there any difference directly clicking Transport buttom from PFCG screen? do I need to re-do all my Role transports again?
Thanks,
KKI can't give you a definitive answer, but in PFCG, there's a tick-mark "Also transport the generated profiles of the single roles" on role transport screen.
This could be the difference - checking this probably piggy-backs the profiles to the transport.
Personally, I leave it unchecked and regenerate all profiles on the target system via SUPC. -
Exchange Installation Error on Mailbox role: Transport Service Step
The error I receive occurs at 47% of the Mailbox Role: Transport Service installation. The details of the error are as follows:
Mailbox role: Transport service
FAILED
The following error was generated when "$error.Clear();
if ($server -eq $null)
set-ExchangeServerRole -Identity $RoleNetBIOSName -IsProvisionedServer:$true -DomainController $RoleDomainController
" was run: "Active Directory operation failed on DC1.xxxxxx.xxxxxx.com. This error is not retriable. Additional information: The object cannot be added because the parent is not on the list of possible superiors.
Active directory response: 00002099: NameErr: DSID-0305109C, problem 2005 (NAMING_VIOLATION), data 0, best match of:
'CN=EXCH-MBOX1,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=AZGT,CN=
Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxxx,DC=xxxxxx,DC=com'
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
Also, when opening the setup log I have this:
[12/26/2012 17:51:25.0809] [1] [ERROR] A naming violation occurred.
[12/26/2012 17:51:25.0809] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___a16cb82f909348d3a32b9046f3bfb9ba Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[12/26/2012 17:51:25.0809] [1] Setup is stopping now because of one or more critical errors.
[12/26/2012 17:51:25.0809] [1] Finished executing component tasks.
[12/26/2012 17:51:25.0809] [1] Ending processing Install-BridgeheadRole
[12/26/2012 17:51:25.0825] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[12/26/2012 17:51:25.0825] [0] End of Setup
[12/26/2012 17:51:25.0825] [0] **********************************************
I have done a ton of searches trying to find a resolution to this error and there are two pages with a similar issue for Exchange 2007 but after trying the solutions suggested, the installation still fails with the same error.
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploylegacy/thread/dfa9961a-9b20-4c17-ae4d-ebf44c66c18f/
http://exchangetroubleshooting.blogspot.com/2011/05/unable-to-run-preparead-command.html/
Some additional information:
This is a clean installation of Exchange 2013 in a forest that has never had exchange.
The domain and forest preparations run without errors and are at functional level of 2003.
The Exchange server has all prerequisites installed for a Mailbox server role and is running on a VM with Server 2012 as the OS.
This error occurs on other VMs as well that we are trying to implement as mailbox servers in the same forest.
I am running the installation as an enterprise, schema, domain admin.
Thanks for your help in advance.Yes. I cleaned out Exchange with ADSIEdit so I could re-run the Prepare Schema, domain and all domains and then re-ran setup to show the output here. But the install still failed.
PS F:\> .\setup /IacceptExchangeServerLicenseTerms /PrepareSchema
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema
COMPLETED
The Exchange Server setup operation completed successfully.
PS F:\> .\setup /IacceptExchangeServerLicenseTerms /PrepareAD /OrganizationName:AZGT
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have b
een detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.
aspx
Configuring Microsoft Exchange Server
Organization Preparation
COMPLETED
The Exchange Server setup operation completed successfully.
PS F:\> .\setup /IacceptExchangeServerLicenseTerms /PrepareAllDomains
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Prepare Domain Progress
COMPLETED
The Exchange Server setup operation completed successfully.
PS F:\>
PS F:\> .\setup /IAcceptExchangeServerLicenseTerms /mode:install /roles:Mailbox /TargetDir:"C:\Program Files\Microsoft\Exchange Server\V15"
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Languages
Management tools
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites
COMPLETED
Prerequisite Analysis
COMPLETED
Configuring Microsoft Exchange Server
Preparing Setup
COMPLETED
Stopping Services
COMPLETED
Copying Exchange Files
COMPLETED
Language Files
COMPLETED
Restoring Services
COMPLETED
Language Configuration
COMPLETED
Exchange Management Tools
COMPLETED
Mailbox role: Transport service
FAILED
The following error was generated when "$error.Clear();
if ($server -eq $null)
set-ExchangeServerRole -Identity $RoleNetBIOSName -IsProvisionedServer:$true -DomainController $RoleDomainCo
ntroller
" was run: "Active Directory operation failed on DC1.XXXX.XXXX.com. This error is not retriable. Addi
tional information: The object cannot be added because the parent is not on the list of possible superiors.
Active directory response: 00002099: NameErr: DSID-0305109C, problem 2005 (NAMING_VIOLATION), data 0, best match of:
'CN=EXCHMBOX1,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=AZGT,CN=
Microsoft Exchange,CN=Services,CN=Configuration,DC=XXXX,DC=XXXX,DC=com'
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
PS F:\> -
Echange 2013 Installation Failing at Mailbox Role: Transport Service - 97%
Hi all, let me just preface by saying thank you very much all your time, help, and patience!
So I've gone through the Exchange 2013 deployment guide, have installed all the pre-requisites, and am now trying to install Exchange 2013 CU7 on (2) 2008 R2 Enterprise SP1 servers. Unfortunately it is failing on both of them at the Mailbox
Role: Transport Service - 97% with the following error:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
I've seen and heard the suggestions about enabling IPv6 on the servers as well as the Domain Controllers which I've done to no avail. We do not have IPv6 addresses available on our network as we use IPv4 space, but I've heard just having the
IPv6 adapter disabled is a lot of times the issue. So the adapters are set to DHCP even though there's no IPv6 address for it to grab. The 2008 R2 servers that I'm trying to install Exchange 2013 on are VMs on ESX. Will the
install fail even if it offers to pick up the installation where I left off? Do I need to completely start from scratch? Any help would be wonderful!Hi,
Please verify whether the port 3268 listen on DC.
Please try to enable GC role on all DCs.
Then restart Exchange server, try to find whether Event 2080 exists with all DCs.
Then try to re-install Exchange Server 2013 CU7.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Dear SAP Security Gurus,
We are having delays while putting roles in to transport. If we have 50 or more roles it takes a long time and finally it gives a short dump. Can you please throw some light on this issue? We are having a hard time when we have to transport many roles.
Thanks,
Karthik.Karthik,
Its quite difficult to answer your question. since it depend on transport configuration.
Check with the basis guy why role transport delays are happening?. Is it beacuse of support packs / any upgrades needed for the system?.
Did u implement a QA approval process in your QAS system.?
Check the shortdump error in D. try resolve that. If it is working fine in Q and P then there may be some memory issue or table space issue. Take a look at theshortdump description in ST22. share the explanation given there with Basis team.
But still you can chcek with Basis if you have the settings available and get it done by them.
Thanks,
Sri
Edited by: sri on Jun 19, 2010 12:43 AM
Edited by: sri on Jun 19, 2010 12:44 AM -
Query in a Role transported to Q system, not available in BEx Q system.
Hello Everybody,
After going through number of posts, I could not find a solution to my query.
I've created a query, assigned it to a role. Collected the necessary objects into a BEx Tranport Request. Assigned it to the correct package. Now after the TR has been imported into BW QA system, I dont see the query in BEx BWQ (Quality System). Do I need to transport the role too, to the BW QA system again (Role already exists in BW QA as well as PR systems)
Regards,
SultanSUltan,
This has been reported in many threads...
This usually happens when some element of the query is not collected properly / does not get generated in the target system properly.
To correct this ..
go to RSRT and execute your query ( you should be able to find it there ) and then you will find the query in BEX.
Arun -
Hi Experts,
I have created 2 new business roles, they are working properly.These 2 new business roles are the copies of sales manager and sales employee.I have transported from development to testing client, but only one business role is appearing in testing client and other one missing. What could be the reasons.
Regards
KrishnaHello,
Well, that depends on what you mean with "but only one business role is appearing in testing client and other one missing".
Do you only see one business role when you logon to the WebUI?
--> If yes this simply means that you are not assigned to this role in the organizational model
Or, do you mean that in the business role customizing activity only one of your business roles is present?
> If yes check your transport request and see what entries were taken into that transport. It might be that the other business role is contained in another transport that is not yet released/imported. You can search all transports in a system to see if they contain specific objects in transaction SE01 and then in the menu select "Goto>Objects in Requests" and search for business role objects.
Hope this helps,
Joost -
Open Authorization Objects in role after role Transport
Hi All,
I have transported a R/3 (ECC6, support) role from Dev to QA and Dev (Multiple clients). After transport, Role has authorization tab with status (green) but when i display authorization data i found one new open authorization object (yellow).
I already have generated profile before tranporting. Role is also okay in Dev other clients (We have multiple clients in Dev) with status green and no open authorizations (yellow)
Any feedback/suggestions ?
Thanks in advance
Khasim.This happens when PFUD runs at the same time as you are generating the role. Refer to this note: 355030 - Loss of authorizations after profile generation. Another remote reason could be if your source (DEV) and target (QA) systems use different characters sets. (Note #535554).
If it is the former case, re-transporting your role may just be the solution for you. Just re-generate the role in DEV and initiate a new transport.
Hope this helps.
Ashutosh -
GRC 5.3 | ERM | Best Practise Role Transport
Hi Experts,
can someone tell me the best practise to transport roles from DEV to PRD using ERM?
Thx!Hi All,
As Alpesh mentioned this is possible but not recommended and he is right.
But it is an work arround and which is very long process.
1) Search the role in ERM
2) Select the role and click on copy button
3) In Copy Role screen you can see original From Role(eg, Z:TEST) and From Landscape(eg. QA system)
4) And you can see To role and To Landscape. Here you have to choose your production system.
Along with this you can tick:Detailed Description,Functional Area,Approvers,Custom Attributes,
Attachments and Authorizations.
Then click on copy button. Your role will be saved with your prod server name and you have to do the whole process of role generation for this role.
Thanks,
Sudip -
Hi All,
I am changing single role at authorization level,and i saved it.But this single role is contained in Master composite role .Now while transporting what should I transport..? is it only single role or whole composite role and its derived compoites.?Please advice I am new to forum..!Hi,
Please transport the single role only and use generated derived roles in quality and production if this role is derived.
Regards,
Gowrinadh C -
Hi
I had saved an new workbook under a role and i want to transport the role and work book .When i collect the role, query and workbook in transport connection and click on the transport button I get an error message the details of the error message is below
Diagnosis
Object R3TR ACGR Z_BW_PTP_RPTX, which is not checked by the Transport Organizer, and object R3TR XLWB 46YYIQZ97EX1XIREHOQL8R4RR, which is checked, cannot be edited in the same request.
Only objects of the same type can be edited in the same request.
System Response
The function terminates.
Procedure
If you still want to edit these objects in the same request, first check the packages of the objects.
One of the following conditions must be satisfied for the objects so that you can repeat the function:
All the objects must be assigned packages that are checked by the Transport Organizer.
All the objects must be assigned packages that are not checked by the Transport Organizer (for example, $TMP for local objects).
Thanks
SheetalDear Hi,
Assign the below objects to transportable package
R3TR ACGR Z_BW_PTP_RPTX
R3TR XLWB 46YYIQZ97EX1XIREHOQL8R4RR
and try transporting it.It will work.
Regards
Pradeep $. -
BW Role Transport not appearing
Hi there mates,
I went to PFCG, clicked on my role ' FINANCE '
Then hit the Truck Button, where I created a Transport Request.
However, when I went to SE09, I don`t seem to see my Request.
Please advicedear John mate,
make sure you mark 'customizing requests' in se09/se10, in next screen, try to expand your client number->'Customizing' ...
.. The role is entered in a Customizing transport request (display using transaction SE10)...
SE09 can be used also.
hope this helps. -
Hi,
BW Version-3.5
I created 20 Different roles that will grant access to the different cost center hierarchies..
for that i created a authorization object in RSSM.
Now how can i transport this to Production
1) Do i need to transport the authorizatiuon object i created in RSSM
I tried by selecting the role and grouping 'In data Flow befor' when i draged from left partion to right in transport connection screen
i can't see any authorization object under role only role is avaliable to raise a request
Can you please give me detailed approach transporting roles ....espicially hierarch
ThanksHi,
Authorization objects have to move separately before the Role's moved to a different systeme.
You can include the Authorization object in the RSSM object directory entry by giving the package name.
Hope that would help !
Raju
Maybe you are looking for
-
Intel iMac OSX Snow Leopard 10.6.8 I logon to bank via its internet portal and next screen takes up all 27" display. Can this be controlled in any way or do I just put up with it, it is really annoying.
-
How do I change the phone number in the setup of my keychain?
I put the wrong phone number in my keychain at setup and need to change it. I am fairly new to MAC and need help with this issue,PLEASE!
-
Connecting Printer and HDD to Airport Extreme (windows)
I have gone step by step and the bonjour keeps freezing when I tell it to finish the printer setup. The computer will recognize the printer but will not print. I also tried connecting a usb hdd to the AE and in the utility it shows up but not under m
-
windows has recovered from an unexpected shut down Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: fe BCP1: 0000000000000008 BCP2: 00000
-
Hi Could you please suggest me below issues. 1.I have reports(may be 10 to 100).I have send those reports to my business users(10 or 100 or 200).Can i configure smtp then send or through email? 2.Similarrly i have to send multiple coutry (country wis