BP Status 'Not Released'

Hi,
when creating a business partner, there is a check box 'not released' in Status tab in sap gui. If I check the check box and save without error, will this BP be replicated to ECC?
As I have a business scenario that BP will be created in CRM and replicated to ECC. But it cannot be used for any business transaction until the BP is approved.
Therefore, I need to know if BP flagged with that status, will it be replicated to ECC?
secondly, in ECC, how do i uncheck the check box if the BP is approved and ready to be used. (Once it is uncheck from Not Release, this should replicate to CRM and update the status, so that all business transaction are ready to be used with this BP).
Is this workable?
cheers,
ginnie

Hi Ginnie ,
To answer your First Question ,
Yes, Eventhough you set the Not Released under status tab of general data, Still that BP will flow to ECC. It will give you a popup saying *Business partner has status "Not Released" * and a Yellow Exclamation mark will come next to BP number and it will flow to ECC.
At ECC side , you can use this in transactions too .
Instead of this, I will suggest you to use Central Lock which is just above the Not released check box, to achieve your functionality. If you use this, BP will be transfered to ECC but system will not allow you to use it in any transaction.
So you can achieve your functionality as follows :
1. Create a BP in CRM with Central Lock Tick on.
2. BP will flow to ECC with this tick on.(As a result Central lock, No transactions are allowed for this BP)
3. Once BP is been approved by an approver in CRM, Reset this tick in CRM , which automatically will flow in ECC
4 And now you are able to use this BP in transactions at ECC side
Hope I am able to clear all your doubts. Please revert to me if you need more help in this.
Regards,
Nikhil

Similar Messages

Document Status Not Released

Hello DMS Gurus,
I'm trying to figure out how to control DIR so that if the document type does not have a status network defined, the Not Released red light does not show up on the DIR. I thought maybe if I created a status for my document type but did not link it to change management, the Not Released info would not show, but you will see in my example screen shot below, it still shows. Does anyone know how to prevent the Not Released from showing on the DIR if a status network is not defined for the DIR?
Best regards,
Julie Norman

Hi Julie,
If you are not using document status, then you select "Suppress field" for Document Status under Field Selection in DC10.
Or
You can also check the RELEASE FLAG under Define Document Status >> Attributes. So once you save the DIR, it will show the green light with document creation date.
Hope this will help you.
/Tilak Raj
Message was edited by: Tilak Raj

Cannot create STO due to Material Not released

Hi experts,
I have a query here.
A part number has block code BL (Blocked) in MM in MRP1 & Costing views. Because of which we cannot create Intercompany Stock Transport Orders.
However it allows us to create normal PO's for the same part to the vendors. The material status of this block code BL has only Inventory Mgmnt blocked with "B" whereas rest of the settings
Material 82001 cannot be taken from plant 1001 due to status "Not Released"
Message no. ME125
System Response
Procedure (system administrator)
Check the material status in Customizing:
Define material status
Could you let me know why it behaves differently in normal PO to that of Intercompany Stock Transport Orders?
Regards,
Pri

I dont know the reason, but probably it is to to avoid potential business trouble, to inform requesters at the earliest time that the supplying plant cannot delivery what you request.
Assume you would create STO today for a delivery in November.
You would be lucky because you succefully created the STO.
In November someone in the sending plant would starf processing the goods issue to you, would then realize that it is not possible, would then inform you about that.
you would get in trouble with your customer, as you cannot meet the promised delivery date.
Wouldn't you ask him why he did not tell you that in August already?
But the sending plant has no chance to know this prior to the processing (except they would lookup manually everytime the material master status when you send an order).
So the easisest way to let you know that it is not possible to move material in the sending plant, is thru the message at order creation.
As I said, it is just my assumption. You may ask SAP for the correct answer. Maybe another one here knows it.
Can it be that you do not use delivery processing for this STOs?

Create Service Agreement - In Status field, "Release" is not appearing.

Hi folks,
I am creating a simple Service Agreement in CRM Web UI. Entered all data required like Customer, product, org details, price discount etc.. and tried to "release" before saving.
In the Status field "Release" option is not there to select. I see only "In Process" and "Completed".
Can anybody tell me how to make 'Release' available, so that I can release the document and save it.
The price is not determined for the product. Could that be the reason?
The document is error free as I don't see errors in App log.
Please give me and idea to resolve. Will be generous in giving points.
Regards,
John

Hi Shashidar,
Thank you for your response. Here is the following steps I did:
1. Status profile is CRMORDER
2. In this status profile, I see the following:   Open with status No.10
                                                                    In Process - 20
                                                                    Completed - 30
                                                                    Rejected - 40
3. I added a new entry for Released with status number: 50
4. I have taken care of the Lowest and Highest Limits.
5. I also checked the 'Object Type' as 'Agreement'
Now, I am not clear which Business Trans I should assign. In the drop down list, I see many Bus.Trans for 'Release'
such as APRL - Release / CALL - Release / CREL - Release and so on.
My question is, which one of these should I select. I tried couple of them, it did not work. (Release still not appearing on CRM7.0 Web UI)
Currently, I am trying to release a Service Agreement on the Web UI. I played around with lowest and highest limits a couple of times and it changes accordingly in Web UI. But some reason 'Release' is not visible which carries the status No.50.
I wonder what is going wrong. Any help would be well appreciated with generous points.
Thank you in advance,
Fred

How to retire/archive/status a released workbench transport for an OSS note

My Question: Is there a best practice for the "retiring" or "archiving" or "statusing" of released workbench transports for OSS notes that have been imported into the quality environment, but should never be imported into the production environment?
For example an OSS note is applied and imported into QS1, but then a CRT Hotpack is applied as an entire patch upgrade, so that the prior individual transport is no longer needed. Best Business practice indicates to not delete a released transport, but unless there is a way to permanently segregate them from the remaining legitimately viable transports, there is always a risk that the "stale" code could inadvertently slip through thus overwriting good code.

Hello.
Well, you have confirmed what I suspected when I read the descriptions - wrong forum.
I chuckled and couldn't stop a broad smile from creeping across my face when I read your response though: "the old BASIS type questions". I knew we were a bit behind the times here; you have definitely confirmed this suspicion.
Thank you again. I'll try another search of the OSS notes or put in a customer message just for the heck of it.

Restrict documents from being assigned to a BOM while status is not release

Hi,
I need certain documents to be restricted while they are still 'In preparation' status.
Currently eventhough the status is not released, user can assign a document to a BOM.
I am sure i am missing something. Let me know if anyone has done this. We are not using ECM at this stage.
Regards,
Edi

Hi,
You can do this via workaround of authorization matrix.
1. Create two users: Creator, Approver & Assigner
2. Creator will not have authorization to release the document as well as to assign the document to BOM. Authorization to release the document can be prevented by authorization object C_DRAW_STA. The authorization of object linkage is controlled by object C_DRAD_OBJ
3. Approver will have authorization to release the document.
4. finally assigner will have only document to access the change document when it is released and only then he/she will be able to assign the object linkage.
Or you can go for BASi/User exit at the time of save to control the same.
Thanks
SUMIT GUPTA

Document Status is 'Released', release Interval is showing 'Not Released'

Hi,
I crearted a Document Type.
I'm able to create a document with the type. Though the Document Status is released, the release Interval (which is next to the Document Status) is showing as 'Not Released'.
How do I change this to released (or), can it be hidden.
Please suggest a solution.
Regards,
Ajai

Though the Document Status is released, the release Interval (which is next to the Document Status) is showing as 'Not Released'.
This behaviour can be corrected by setting/checking the 'Release Flag' attribute for the released status defined for this Document Type.The path is SPRO > IMG > CA comp. > DMS > Control Data > Define Document Types > Select the Doc Type in question and go to Define Document Status.
Hope this helps.
Regards,
Pradeepkumar Haragoldavar

Report to Show PR that are not released by release codes

Hello Experts,
I would like to know if there is any report on SAP 6.0 that shows all the purchase requisitions that are not released which shows the releease code (the person's name who has to release the PR). In me55 only could be found by release code, and it is required, I cannot has a report
I think that there is not, but i would like to confirm it.
Thank you in advance,
Best regards

Hello,
1)Go to ME5A t-code & select DYNAMIC SELECTIONS.
2)Select "Purchase Requisition" section and you can make use of parameters like Release Code, Release Indicator , Release Status etc., to fetch the required results.
Hope this helps you in resolving your matter.
Regards
Mahesh

Files/Folders Sticking to Mouse Pointer - Not Releasing (Reset PRAM & Apple Hardware Test Fail to Run)

I've been having two issues with my Late 2008 MacBook Pro 15-inch - Running OS X 10.8.5 (Mountain Lion). Unable to Reset the PRAM and Run Apple Hardware Test (AHT).
On a random basis - File/Folder icons are Sticking to the Mouse Pointer - Not Releasing. I've done everything from trashing finder preferences, making sure Universal Access preferences are off, Restoring Defaults in the Energy Saver System Preferences, Resetting the System SMC. Another post mentioned that this is being caused by the Graphics Driver not working correctly - and mentioned to put the MBP to sleep, then wake it up, and the files/folders are no longer sticking to the mouse pointer. This works for me and released the sticking items in the Finder.
OK, Good this is a simple fix, BUT, what is really causing this issue, and how may it be fixed or repaired?
I also tried to Reset the PRAM and Run the Apple Hardware test (AHT), and these both fail to run on my MacBook Pro with OS X 10.8.5.
1) Resetting the PRAM:
Shut down the MBP, press the power button, and hold down at the same time <option><command>-P-R. The Reset PRAM process never starts up, but rather I receive the Padlock/Password Login which logs me into the Restore System Utilities. I'm unable to Reset the PRAM.
2) Apple Hardware Test (AHT):
Shut down the MBP, press the power button, and hold down the "D" key, the system boots up as normal and does not enter the AHT.
The File/Folder Finder sticking to the mouse pointer issue is very annoying. Does anyone have a solution to resolve this issue?
- Cheers

HI Barbara,
It sounds like the hard drive is failing or has failed. Boot from your Mac install disc and if you can run Disk Utility in case the startup disk needs repairs.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
Carolyn

No Purchase order to be create if WBS is not released

Hi,
We are using the PS system and we create a purchase order with account assignment Q, and we enter the WBS in to the purchase order.
Now the requirement is if WBS is not release system should stop to create a PO. System should allow to create a PO if wbs is fully released.
Pl advise how to do this.
Thanks,
Samir Bhatt

Please go through CJ02-Edit-Status-Lock fictionally.
It will not allow you to create a PO if the WBS is under released and locked. Hope this functionality guide/help you...
Regards
Vikrant

F110 APP run - Payment run has been scheduled, but job was not released

Dear Friends,
We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
But when we selected payment run, immediately it showed the below status:
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Also I'm not able to delete the Payment run made, fields are in disabled mode.
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

Dear Supriya,
Thanks a lot for your immediate response.
Still the same problem is existing even after one and half hours.
ie.,
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Could you please let me know which Tcode we have to go to release this inorder to solve this issue.
As it is in the production client, it would be really helpful if you could let me know the details at the earliest.
Thanks again.
Regards,
Dwarak.

BBP_ANALYZE_PO_APPLIC is not released

Hi,
We are implementing SRM5.0 with ECC6.
When we create PO manually in SRM then it does not goto R/3. Here PO status remains in Order condition but there is not document transfer from SRM to ECC as well as when we tried to push through FM, it gives following errors;
1.BBP_ANALYZE_PO_APPLIC is not released
2. PO XXXXXXX : No instance of object type purhcaser order has been created, External Referance.
We have already checked all settings for ECPO as well as backend document type.
We can create PO by normal cycle like SHC--->PO its goes properly in ECC
When we create Manual PO and click on Order as direct material then also SRM PO goes to ECC properly.
Only we are facing problems to transfer SRM PO which created manually to ECC. (Note - This process was also working fine before few days)
Any idea?
Thanks,

Hi
Please see some discusions on this same issue.
PO created with status : Transfer Failed (E.Sys.)
Problem with BAPI_PO_CREATE1
/thread/3276932 [original link is broken]
regards
Muhtu
Edited by: Muthuraman Govindasamy on Sep 1, 2008 6:10 PM

PO can be created even if PR is not released

Hi,
I am facing an issues as follows after upgrade to ECC.60 from 4.6C
After creating a PR though it is picking a correct release strategy & PR is not released I can create PO with reference to PR.
But if I try to create PR which is created before upgrade which is not released, I am getting an Error message (message no 06,055) which us as per requirement.
What we found is on PR create/change/display transaction on Item detail screen & on Status tab new field is added in ECC 6.0.We are getting different status for PR created before upgrade & after upgrade as follows.
1) For PR created before upgrade we are getting status as 'In release'.That means system will not allow me to create PO with reference to this PR.
2) Where as for PR after upgrade we are getting status as :Active".That means system will allow me to create PO with reference to this PR.
Please tell me why there is a difference in status for both PR even though both PR are not released.Also how to make sure that whenever new PR is created & is subjected to release strategy the status will be picked up as "In release".
Note:Status can be seen on PR document>Item Details Screen>Status Tab.
Your help is highly appriciated.
Thanks & Regards,
Shyam

done.

Table for Invoices not release

Is there any table to find the list of invoices which are not released for accounting
if yes please let me know
Regards,
KK

Hi,
I think you could check table VBRK for the field: RFBSK(Status for transfer to accounting).
The different value of this field means like following:
     Error in Accounting Interface
A     Billing document blocked for forwarding to FI
B     Posting document not created (account determ.error)
C     Posting document has been created
D     Billing document is not relevant for accounting
E     Billing Document Canceled
F     Posting document not created (pricing error)
G     Posting document not created (export data missing)
H     Posted via invoice list
I     Posted via invoice list (account determination error)
Regards,
Alex

How processing status "In Release " is set in purchase requisitions

Hi Experts,
How processing status, iun release is set in item details (Status tab page) of purchase requisition, also is it possible that release status is "release completed" even requisition is not subject to release strategy.
how release active is set.
Thank you
Anand

Hi
The Stauses in the PR will be active opnly if you have the release strategy setup for the PR.
"In release" is set when the PR is created & is subjected to approval & in the approval process.
Relased is set when the PR is approved fianlly.
Thanks & Regards
Kishore

BP Status 'Not Released'

Similar Messages

Maybe you are looking for