BP transport from Sandbox to exisitng solution
Hi All,
I have loaded best practice solution on my sandbox via DVD and now I want to transport only the configuration part of BP Solution to existing solution. I am not able to identified what to transport because there are so many tables automated configured and the other system has client specific solution.
What should I do? Any one able to give me direction?
Thanks
Mahesh
Try re-importing the transports with the following import options:
1) Overwrite Originals
2) Overwrite Objects in Unconfirmed Repair
Similar Messages
-
Error 8 In Update,while doing transport from sandbox to Dev.
Hi All,
I am trying to transport some 100 queries from sandbox to development. I made a 10 queries in a single request and transported it from sandbox to development.First 6 transports went fine.(means 60 queries with out any issues).next 4 transport request ended with the Error 8 in update.
R3TRELEM42NJZNEBP9QAAI6BSCUZI8CYG original object cannot be replaced
R3TRELEM42NJZNEBP9QAAI6BSCUZI8CYG was not imported in this step
Start import R3TRELEM42NJZNM088BZT4PRY6XBSABO8 ...
R3TRELEM42NJZNM088BZT4PRY6XBSABO8 original object cannot be replaced
R3TRELEM42NJZNM088BZT4PRY6XBSABO8 was not imported in this step
Start import R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 ...
R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 original object cannot be replaced
R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 was not imported in this step
Start import R3TRELEM42NJZO1DA5JEUDSO9V20CE93S ...
R3TRELEM42NJZO1DA5JEUDSO9V20CE93S original object cannot be replaced
R3TRELEM42NJZO1DA5JEUDSO9V20CE93S was not imported in this step
Can you please give ur valuable Suggestion Please.
Thanks.
SrinivasTry re-importing the transports with the following import options:
1) Overwrite Originals
2) Overwrite Objects in Unconfirmed Repair -
External Web Service call from Sandbox Solution in SharePoint 2010
Can anyone from this forum can tell me how to call an external web service from Sandbox solution?
It would of great help as got stuck on it for a long time.
Note:- Cannot use Silverlight and JQuery to call web service from client side.Cannot use full trust proxy.Hi Dibyendu,
Sorry for delay but fact that we can not call webservice in sand box solution(It's does not support).
The reason behind of this sand box solution support only full trust code.
One or more assemblies referenced by the XmlSerializer cannot be called
from partially trusted code.
When you create a reference to a Web service, Microsoft Visual Studio®.NET creates and places one or more objects in your assembly to store the argument data passed to the method(s) in the Web service. These objects are serialized using the XmlSerializer class
when you invoke one or more of the methods in the Web service. By default, if your assembly is strongly named and resides in the BIN directory, callers with partial trust cannot access objects within that assembly. When you make the call to the Web service
method, the XmlSerializerdetects that there are partially trusted callers on the callstack (i.e. your assembly) and prevents the serialization from taking place even though the object resides in the same assembly.
Er.vinay -
Transporting objects from sandbox to dev
I did some intrfaces in sandbox due to unavailibility of dev server. Now its available and I wanna transfer my objects fom Sandbox to Dev. How can this be done???
By converting it to TPZ format or some other way???
Any sort of help is appreciated....Hi Soumen,
Using TPZ files will be easier for transporting XI design and config objects.....U can transport ur design objects from sandbox to Dev without problem.....but to transport config objects u hav to transport BS and TS from ur source SLD to target SLD first....thn u can export the TPZ files from source ID.....however u dnt require it if BS and TS of same name in both sandbox and Dev....to transport BS and TS follow these steps.....
1) select all the technical systems you need to transfer in ur source SLD.
Then, choose Export.
Note : Associations for business systems with no technical system in the target SLD will be lost. This will
result in error messages. Ensure that all technical systems are selected.
2) Choose Download file and Save the Zip archive.
3) Choose Administration on the traget SLD home page.
Then, Choose Import.
4) Browse to the exported file and choose Import File.
Follow same for BS also.....
U can chk dis also....
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
Regds,
Pinangshuk. -
Migration from Sandbox solution to SharePoint apps
Hi,
We have a requirement that we need to migrate SharePoint Sandbox Solution to SharePoint Apps. Few things which I would like to know that if the Sandbox solution has some custom code / server based code then how we have to migrate into Apps. Because
Apps only support client based. And in some cases, sandbox has no code solution. In that case, how we can migrate into Apps..
Recently, many companies are trying to migrate from Sandbox solution to apps becuase microsoft depreciated sandbox in SharePoint 2013. In future, they may stop to support sandbox solution. Please share your views on how to proceed on migration code
and without code based solution to Apps...
Balaji -Please click mark as answer if my reply solves your problem.HI Balaji,
I assume you are having on premise Farm not office 365 so in that case
http://msdn.microsoft.com/en-us/library/office/fp179887(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/fp179930(v=office.15).aspx
you have the following options for code:
1- SharePoint Hosted Apps: you will write Javascript code and use Javascript to access client object model
http://msdn.microsoft.com/en-us/library/office/fp142379(v=office.15).aspx
2-Provider Hosted Apps: you will write 2 parts , the first one is an application that will be deplpyed to SharePoint server the second one is a web site (asp.net or mvc) that can be hosted on the SharePoint server or on a separate Application server and
here you you can put all the logic of your .net code and you can have remote event recievers
http://msdn.microsoft.com/en-us/library/office/fp142381(v=office.15).aspx
for non code option what you will be doing is using SharePoint designer but mostly you will still to have SharePoint hosted apps
some codes
https://apps.codeplex.com/
https://corporatenewsapp.codeplex.com/
Hope this is clear and helpful
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation -
Can not transport from DEV to PRD (Hang up)
Hi Experts,
Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
==> Stop all TP running in OS level
==> Delete all pending job in Import Monitor (with truck logo)
==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
Thanks.
Edited by: Deo Pasion on Feb 20, 2010 7:25 AMHi,
Its well known problem which is discussed many times in many threads.
Did you check TP System Log and TMS Alert of the System ?
Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
Please refer these useful threads with similar symptoms.
[Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
[regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
Also check this SAP Note 71353 - Transports hang during background steps.
Regards
Bhavik G. Shroff -
Moving XI transports from QA to Prod server
Hello,
We are getting ready to send our XI transports from the QA server to the production server. We are currently using the file transfer method - we have not yet finished setting up the CMS server.
Now my question is this:
For the Integration Repository, am I supposed to send the same file created from our dev server to the production server, or do I create a new transport file from our QA box and send that file to production? Same question applies to the Integration Directory.
For example, the FileA.tpz gets created in the dev server, exported to the QA server. Developers are done testing in QA and want to move the objects to production. Should I export the same FileA.tpz to the production box OR generate a new transport file from the QA server (FileB.tpz) and send that to production box instead?
Thanks in advance.Joy,
Ideally you should move from Dev to QA and from QA to Prod. Then everything will be in sync. If you move directly from Dev to Prod and if there any changes then they will not be in QA. So this should not happen.
Because only after developement you will move to QA. Once when you test in QA then you will move to Production from QA.
Check this weblogs for further info:
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
---Satish -
Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request : BD1K900065
System : BQ1
tp path : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu. -
How can we call a external webservice from sandboxed webpart?
Hi,
I need to call an external webservice from sandboxed visual webpart in 2013. And that webpart would be used in office-365 site. Please let me whether it is possible or not.
Thanks,
ArindamSandboxed solution server code can't call an external web service. There are ways to write a sandboxed solution that calls a web service using client side code. Here's a sample of a silverlight application deployed via the sandbox that can call
an external web service.
http://msdn.microsoft.com/en-us/library/gg615590(v=office.14).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Action Transport into sandbox in urgen correction SDHF???
Hi Expert,
We face a problem in the action transport into sandbox during an urgen correction, the solution manager not recognize the sandbox system. Any help please!
The role of the sandbox is " evaluation system"
The error is the following:
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Unable to find system Sanbox for task
/TMWFLOW/SCMA_TRORDER_IMPORT_H
/TMWFLOW/TASK_START:E:/TMWFLOW/TASKLIST:213
Exception CX_SOCM_POSTCONDITION_VIOLATED occurred (program:
CL_CHM1_INSTANCE==============CP, include:
CL_CHM1_INSTANCE==============CM001, line: 59).
Best Regard,Hello Brizes,
You might want to look at SAP Note 1094449 - "Change Request Management: Transport copies to sandbox", for help on this problem. Also please use SAP Note 1290986 - "ChaRM - Guidance of transporting copies to other systems", as a reference.
Regards,
Paul -
Error when creating transport from Satalite system
Hi all i am getting the following error when i try and create a transport from a satalite system.
The RFC connection to the Solution Manager system is not maintained
Message no. STMWFLOW010
Diagnosis
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
System Response
Action cancelled.
Procedure
Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality.
I have checked the RFC to Solman and that is working fine. How can I deactivate the project lock functionality?
Points will be awarded
Thanks
SantoshHi.
Please have a look at [this|http://help.sap.com/saphelp_sm40/helpdata/EN/43/7227481a856fcae10000000a1553f6/frameset.htm]
Hope it helps.
/cheers -
Transports from Dev System to Quality System, Objects copied in Local reque
Hi All,
I am doing transports from Dev Box to Quality Box, while collecting the objects , some required objects got collected in a local request(9xxxxxx) and some got collected in Work bench request(9yyyyyy), Now I want to add , the objects collected in the local request to the work bench request to have a single work bench request i.e 9yyyyyy for transport , with all the objects of the local request 9xxxxxx and already collected objects in work bench request 9yyyyyy,
Please provide the solution for the situation
Thanks in advance
suitable answers will be awarded
PrasadHi,
1.First see that your workbench request has a different target system than the ones pointed to by the development class/package of the objects you are trying to assign.
or,
The objects are not assigned to correct development class/package.
2. When we try to create a workbench request, we will see only the request and that is fine.
3.Now, release the local request containing your objects.
4.Include the local transport objects to the new workbench request (Ctrl + F11).
and release and transport the workbench request.
Pls assaign the points if it is useful.
Regards,
Raghavendra Rao.Kolli. -
ChaRM Action 'Transport into Sandbox System'
Hi,
How the action 'Transport into Sandbox System' works.
Wanted to know how this action works & in TMS do we need to map sandbox client.
From sandHi PK,
answer is Yes for the STMS and also you need to have a system defined as single type within maintenance cycle you re working in. Solman will be using your tasklist structure to understand which system is supposed to receive the import
Since a couple of stacks it became possible to actually define the role type of system that is supposed to receive the import of TR. I mean by role type the kind of system like you define in STMS when declaring a logical component
Regards
Khalil -
How to migrate changed Business Scenarios from Template Project to Solution
SAP Solution Manager - How to migrate changes in Business Scenarios from Template Project to Solution?
Our Global ASAP strategy is based upon a Template Project, Implementation Project, Maintenance Project and Solution with Business Scenarios.
Changes in the Template Project for existing and new Business Sceanarios, etc. are correctly executed. Up till now we have successfully implemented our Template Project and secondly extended our Business Scenarios from 4 to 14. Our 3rd upcoming change will be changes on Business Scenarios as well. These planned changes for the Business Scenarios need to be consistent, possibly without manual intervention.
During a Proof of Concept (PoC) in our Sandbox (SXB) we have identified a possible serious problem when trying to publish these changes in Business Scenarios in the Template Project to the Solution. SAP Solution Manager (SSM) does not seem to support a scenario where Business Scenarios in the Solution can be refreshed or updated with changed Business Scenarios in the Template Project.
We have identified 2 possibillities:
1. Manual project upgrade
1.1. Synchronize the changes for the Template Project normally;
1.2. Delete the changed Business Scenarios from step 1.1 in the Solution;
1.3. Add the changed Business Scenarios from step 1.1 into the Solution.
For this scenario we foresee a big problem because all Content and Issues connected to the old Solution Business Scenarios loose their coupling with the Solution.
For the Content this may not be a real problem because the Content is also available in the Template Project.
However the Issues are loosely coupled to the Solution Scenarios and therefore need to be coupled manually to these processes.
2. Manual changes using Maintenance Project
2.1. Synchronize the changes for the Template Project normally;
2.2. Publish all changes from step 2.1 in the Template Project
2.3. Add all new Content from step 2.1 to the structure of the Maintenance Project;
2.4. Relocate Content and Issues when the Business Scenario has been relocated.
Because SSM does not support this activity we need to delete this Business Scenario first and secondly re-create it again on the correct spot.
Our question: How has SAP done this in other customer projects?
We need to have a working solution by the end of March, 2009.
Best regards,
Peter HendriksenPeter,
Did you get an anwer to this question from SAP?
Rgds,
Eamonn. -
Reg: Error while transporting from Quality to Production
Hi ,
I am facing a problem while transporting ODS from quality to production.. The same works perfectly when i transport from Dev to quality.
The Error Displayed while transporting is
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when resetting DataStore Object to the active version
Kindly give me some suggestion ..
Thanks in advance
Regards
Gurugo to the source system RFC connection in SM59 and do a remote login - if you get the login page there then there is an issue with the RFC connection. also check if any other system is using the same RFC.. we had a situation where th R/3 connection was being used by 3 BI instances and everytime we reset the password , another system would lock the sme , ultimately we identified the systems and did a password reset in all the systems and then the issue got resolved.
but then we also faced the same issue you faced and it was related to login issues - check the remote login and that will tell you.
Maybe you are looking for
-
Getting Err : An error occurred in the message processing program.
Hi, Im wrking with Smartforms. I have assigned output type LD00 ,with driver prgrm name and Smf name. after that executing with VL03N , its giving error . Output could not be issued Message no. VL086 Diagnosis An error occurred in the message process
-
SAP Upgrade from SAP R/3 4.6 C to ECC6.0, Delete DMC componenet
Dear All, We are upgrading SAP from R/3 4.6C to ECC6.0 . Our client has installed DMC in 4.6C as a "Main transport" request . DMC becomes an Add-on tool in ECC6.0 . SAP pepare phase recognize DMC is already installed in 4.6C and required upgrade
-
Hello folkes I have not been on this forum for awhile so I might have missed some details regarding Apple approving the Content Viewer. I know word on the street is that 'Apple will approve it when Apple decides to approve it' but maybe somebody has
-
How to create a Supplementary security domain
Hi all, i am new to javaCard. i want to create a Supplementary security domain, but i have no idea. is it that i need to create an applet implements SecureChannel, then install the applet with the privileges 0x80(security domain)? is it right? Anybod
-
Drop triggers in code causes SQL command not properly ended.
running the following command in SQL developer giving the following error ORA-00933: SQL command not properly ended. What am I doing wrong Begin For I In (Select Trigger_Name, Owner From Dba_Triggers Where Trigger_Name Like 'ABC%' And Owner = 'my_sc