BP Upload of delivery plant: CRM 7.0 = ERP 6.0

Hi Experts,
we have downloaded customer master data and ERP Plants (DNL_PLANT) into the CRM. In future we need to create customers (sold-to) in CRM and distribute them into the ERP. Some ERP sales area data do not exist in the CRM data model. Among others t field delivery plant (KNVV-VWERK). As I said ERP plants have been downloaded (DNL_PLANTS) so that table CRMM_LOCMAP is filled. My query is how to maintain delivery plants in CRM BP / Account maintenance. I did not find a relationsship category to assign bp plant to bp customer. Is it necessary to enhance BP (Shipping data - CRMM_BUT_SET0020) and if so,what are the steps because bp sales data enhancements are not possible in EEW/AET?
I hope that anybody has alreday had similiar requirements.
Thanks for your help.
Regards, Mark

Hello Shanthala,
in our system mentioned relationship category is "Undefined partner". Besides to which partner function do you assign the relationship category?. This is necessary to assign correct sales area in ERP.
Have you had a similar requirement and already solved it?
Thanks for your further help.
Kind regards,
Mark

Similar Messages

How to determine the delivery plant in a CRM Sales Order

Hi experts:
In CRM how to work the delivery plant determination? and I can change the Plan in a Sales Order before its download to ECC?
I download the DNL_PLANT object but i don't understand what is the functionality of these are created like business partner in CRM.
Thanks in advanced by your orientation about these questions that have me a little bit confuse.
Sussie

Hi Reddy
Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
I know that in R/3 is determined by:
1. Customer-Material info record (Sales Area data)
2. Customer Master data (Sales area data)
3. Material Master data (Sales-area data)
I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
it?? and where in the crm sales order before it is download to R/3??
Thanks
Sussie

How to Upload the PoDs in CRM

Hi Experts,
I presently finidng difficulties to upload the PoDs in CRM. Did anyone has Uploaded the PoDs in CRM Before...
Regards
Prab

Point of Delivery (PoD) technical object exists both in CCS and CRM. Although these two objects share the same name, they are fundamentally different. The CCS PoD describes the supply point at which a customer is supplied with a utility service (electricity or gas).

Error Message V1810 - Make to Order No Change delivery plant in Sales Order

Hello, for a client where I'm setting the flow intercompany , but i have an error on the Sales Order when I must be change delivery plant.
Scenario: Make to Order, Product configuration, Sales Order BOM created by CS60
Step:
1 - I create sales order fo company X delivery plant 1000
2 - Creates Order BOM on plant 2000 Company Y
3 - creates MRP Planned Order
4 - Convert Planned Order to Production Order
For different issues can happen that you decide to ship the goods to a different plant than the X. Production Plant remains 2000.
If I try to change the plant on the Order system stops me with the following error:
Message V1810 - Plant can no longer be changed
Diagnosis
The plant can no longer be changed in the Following situations:
The item has been assigned to a project.
There is a production order for the order item but it is not a staticassembly order.
Already have accrued costs.
For the very complex structure of the product I can not delete the production order and sales order BOM.
How do I handle these cases?
Can anyone help me?
Best regards
Giuseppe

Hi Guiseppe,
can you please answer some questionsa to understand your requirement.
if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

User Exit for Updating Delivery Plant at Item Level in Sales Order

Hello Experts
There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant. There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
Thanks a lot....
-Harkamal

Best place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
Are you kidding??? You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!! Never, ever change a critical value like plant in the SAVE user exits...

SAP Note 144253 For error Enter valid delivery plant in sales order

Hi all,
I am getting the error "Enter valid delivery plant" while creating the sales order . This is due to Customer and plant are same .
For that I got one SAP Note 144253.
If anyone implimented this SAP note Could you please share is there any impact of this note after implimenting.
Thanks
CM

Hi,
Go to bellow links,
http://help.sap.com/saphelp_nw04/helpdata/en/60/8def3981fe5d7de10000000a114084/content.htm
http://www.sap-basis-abap.com/bc/steps-to-install-sap-note.htm
Thanks,
Raviteja

Pros and Cons not determining / having a Delivery Plant in Sales Order?

Hi Mates
Here I have come-up with one more (weired?) requirement from my client.
We have two plants manufacturing same product and supplying to all customers (some time in same sales order with two different line items).
At the timeof creating a sales order, marketing does't know from which plant the material will move and hence they don't want to fill the Delivering Plant field (VBRP-BUKRS at Shipping tab) for each Item.
They are insisting me to map it as above though I had explained about various pros and cons for not determining a mandatory delivery plant
in sales order like the requirements and shipping stuff.
Yet, yet they want this.
Has anyone come across this kind of requirement before? What best you had done for that?
Can I ask you what are the Pros and cons on not having a Delivery Plant at Sales Order level?
what if I could determine it Delivery level?
Any comments, suggestions, replies and advices are taken humbly.
Cheers
Ajay Kumar Veeranki

Dear Mahulenka
Thanks a lot for the reply. It do have helped me.
Yest it is VBAP-WERKS (typo error ).
Infact I had given the same solution for the issue.
Interstingly, they are insisting on a better solution fit for their requirement. Anyway shall 'highlight' the points again to them try to get it solved
Just wondering has anyone faced the same situation before.
Thanks again for the reply and good luck
Best Regards
Ajay Kumar Veeranki

Difference B/W Delivery plant and item plant in Sales Order

HI,
May i know Difference between Delivery plant and item plant in Sales order and what is the use of those fields.What is the process of raising sales order for different plants.
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:10 AM

HI G. Lakshmipathi,
Thnks for the reply.Yes i am comparing (DWERK (at header level) and WERKS (at item level)) these two fields.
Any how we can give only one plant in Customer Master, we are not maintaining Customer/mtrl regard (Not required in our company scenario) and we have extended MMR to different plants.
So as per ur answer u went me to change only WERKS (at item level) while raising sales order for different plants.Is it enough?
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:46 AM

Mass upload of BP into CRM

Hello!
I peform mass upload of BPs into CRM. I use FM BUPA_CREATE_FROM_DATA to create BP itself and BUPA_ADDRESS_ADD to save BP addresses and call these FMs in the same turn for each BP.
So, if I do that for 1-2 BPs, it works perfectly. All BP are saved in CRM with there addresses on COMMIT. As soon as the number of uploaded BP increases(between two commits), for example, up to 100, there is an error happens: E831(AM) in ADDR_MEMORY_SAVE.
As well as I understood, it happens because of address saving peformed before BP saving on commit. I tried first to save BPs only (with commit) and then their addresses, and it worked on mass upload without any error.
So, is there any idea about how to upload each BP with his address simultaneously without any error by mass upload?
Thank you.

You can upload millions of records using these function modules.Infact I am doing the same.
Make sure that the data structures,tables which are passed to the Function modules are cleared for each time and FM's should be in the below mentioned order.
BAPI_BUPA_CREATE_FROM_DATA
BAPI_BUPA_ADDRESS_ADD
BAPI_TRANSACTION_COMMIT.
Thanks,
Thirumala.

Delivery Plant and Engineering Change no in BAPI_SALESORDER_CREATEFROMDAT2

Hi Gurus,
My requirement is creating sales order useing BAPI_SALESORDER_CREATEFROMDAT2,
but iam unable to find out Delivery Plant and Engineering Change no. in this BAPI.Plese Help me,
Regards
Srinivas

We use Delivery plant as Shipping point ,it is VBAP-VSTEL Field,you can see Sales order Shipping tab at item level.
Check the sales order level,if coding is good then there may be some user exit to stopping the data .
also check with functional guy to confirm the delivery plant field.
BAPI Structure is
BAPISDITM-SHIP_POINT
Thanks
Seshu

TCODE VA01 - Delivery Plant determination for subitems

A worklfow event is trigger and creates a sales order from a purchase order. The system automatically assign a plant for the line item in the sale order from the main item, but our process demand that the system assign the correct delivery plant from the Material Master view depending on the Sales Organization. Does anybody knows what are the enchancements or user exits to assign the correct plant? I did find a few SAP notes but the consultant told me that their are only for reference. Please advise.
att, Eric Antonsanti

Tony:
What TCODE did you use to modify the User Exit "MV45AFZZ". Do I need to create a project in TCODE CMOD or do I need to modify the user exit thru TCODE SE80 or SE38. Please advise on how to modify the user exit. We do have the logic to assign the delivery plant. Thanks for your help.
att, Eric Antonsanti

How to make delivery plant fixed for va01 transaction in abap

hi.
My req is to make delivery plant to a fixed plant code for example 'KO01'. in va02 transaction.
regards
Rohit

Hi,
Use the form routines in user exit "MV45AFZZ".
If you want to change the plant while you open the order in VA02, use the form-routine "USEREXIT_READ_DOCUMENT". If you want to change the site only when you save the order use the form-routines "USEREXIT_SAVE_DOCUMENT_PREPARE" or "USEREXIT_MOVE_FIELD_TO_VBAP". In all these cases modify the structure field XVBAP-WERKS.
Regards
Vinod

Sto - vendor in delivery plant

HI,
pls tell me ,, in sto process what is purpose of assigning dlvy plant in vmr.. pls explain
Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant

Hi,
When youu2019re selling a product or materialu2026..you have to declare a vendor and a customer. In STO process delivery plant is a vendor and receiving plant is Customer ieu2026.you are Assign your vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
Regards,
Biju K

Change Delivery Plant in Good Issue

Hello,
Is possible to change the delivery plant in a Good Issue?
Exist some User exit or BAPI to use to change the Good Issue?
Thanks for all,
Nat.

Hi Guiseppe,
can you please answer some questionsa to understand your requirement.
if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

Movement type to consume customer consignment stock in the delivery plant ?

Need MM Functional expertise help to resolve the issue
They are two plants associated
1. Deliverying Plant (Customer Consignment Stock) ---> FPP
2. Recieving Plant (Vendor Consignment Stock) ---> FNT
Recieving Plant (FNT) will send a consignment Purchase Order (P0) to the delivery plant (FPP), which
inturn delivery plant FPP will do post goods Issue (PGI) with movement type 635 {635 --> moves
the stock from sloc 1000 to customer consignment stock}
Once movement type 635 is completed, it will go customer consignment stock in the delivery plant FPP
So Far OK..
Recieving plant (FNT) will recieve the stock against movement type 101K into Consignment location, followed
by movement type 411k (to move the stock from consignment location to OWN location). Once its under OWN location,
the inventory can be utilized for service orders (261)
Issue:
Not able to find a movement type to consume customer consignment stock in the delivery plant FPP
Note: 1. 411k is used to consume vendor consignment stock
2. Both plants are in different company codes
Following OSS notes has been checked, but none is addressing the issue
1. 520024
2. 610896
3. 362032
4. 13006

Customer consignment stock is consumed physically by a customer, the customer reports to you how much he has consumed, the delivering plant creates then a consignment order for consignment issue in the delivering plant, followed by converting it to a delivery and posting goods issue.

BP Upload of delivery plant: CRM 7.0 = ERP 6.0

Similar Messages

Maybe you are looking for