BP Validation
Hi all,
i am doing BP validations for BP type. Upon validating and there is and error, all screen fields are greyed out hence restricting the user to enter correct data. The only way now is to cancel the transaction and execute it again which is a bit tedious. Is there any way of preventing the fields from being greyed out.
Hi Willard,
I'm assuming that you're using SAP gui, and doing the validations within a Z module, for transaction BP ?
In this case, if you encounter an error during the validation, donot raise the error using ABAP command MESSAGE. Instead, use the function module BUS_MESSAGE_STORE. This FM puts puts the error message into a container and the BP UI framework will display it on the screen AND then also keep the fields editable. In case the fields are greyed out when the error is thrown, just press 'ENTER' and that should make them editable again.
Directly using command MESSAGE does not return control back to the BP UI framework, and hence its unable to bring the fields into an editable form.
Hope this helps you.
Cheers,
Rishu.
Similar Messages
-
View data in client B from client A in the same SID without a valid logon?
Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan -
DEVOLUÇÃO DE EXPORTAÇÃO - CFOP 3201 - GRC VALIDA DADOS DI.
Boa tarde a todos!
Estamos em um projeto de NFE XML 2.00 e nos deparamos com o seguinte erro:
Ao emitirmos um NF-e de devolução da mercadoria que se encontrava no Porto (devolução de exportação - CFOP 3201), a validação do monitor GRC informa que é necessário constar os dados de importação, apesar deste processo não se tratar de importação. Os seguintes logs de validação são gerados:
Erro de validação: campo Código do fabricante estrangeiro no sistema. Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_ADI-CFABRICANTE, ID campo I028)
Erro de validação: campo Nº da adição. Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_ADI-NADICAO, ID campo I026)
Erro de validação: campo Nº sequencial do artigo na adição. Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_ADI-NSEQADIC, ID campo I027)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-CEXPORTADOR, ID campo I024)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-DDESEMB, ID campo I023)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-DDI, ID campo I020)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-NDI, ID campo I019)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-UFDESEMB, ID campo I022)
Erro de validação: campo . Campo é obrigatório e não pode ficar em branco. (campo IT_NFE_IMP-XLOCDESEMB, ID campo I021)
Estamos no SAPK-10015INSLLNFE e as seguintes notas relacionadas a validação estão aplicadas:
1493980 Validation for field xJust in cancel and skipping messages
1499921 Problem with validation after implementing SP15
1500046 Upgrade validation rule for field ID for version 2.00
1500742 Adjust validation for field NADICAO and NSEQADIC layout 2.00
1502217 Extend validation rules for , layout 2
1504379 Adjust validation for field X_CLISTSERV
1511291 Update allowed values for field E1_CPAIS for validation
1511577 Update validation rules for field VUNCOM_V20
1520861 Update validation rules for OIL_CPRODANP and OIL_UFCONS
Não encontrei nenhuma nota SAP recente para o componente SLL-NFE que seja relacionada a este problema.
Desde já agradeço pela ajuda.
Sds / Renato Penido.Boa tarde, Fernando,
Obrigado pela pronta resposta.
Debugamos a BADI e descobrimos que os dados de importação estão sendo gravado "em branco", gerando o erro de validação no GRC, tal qual dito por você.
Aprimoramos a lógica da BADI para que a tag de importação não seja preenchida indevidamente para as notas de devolução do porto e as notas foram aprovadas.
Muito obrigado,
Renato Penido. -
how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?
Hi
I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
Especially the section Don't which says -
DON'T
Don't post a series of questions in a single post. Splitting them into separate threads increases your chances of a quick answer.
PZ
www.pziecina.com -
When i login it says my apple id is valid but its not an icloud id
when I try to login i get a message telling me my apple id is valid but its not an icloud id .I dont have any apple mobile priducts so i have no idea what to do.Any advice would be greatly appreciated.
You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID. You can only sign into an existing account on a PC. You first have to create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.
-
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
Creating Master to show only rows for which valid entries exist in Detai
I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
Thank you!I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
Thank you! -
Validating records into a maintenance view
Hi folks!
I have a simple Z table (say ZTABLE) and a Z view based on it with some related description (say ZVIEW). The ZTABLE has a DEC field (called COEF) with 2 decimals and it should have only numbers between 0 and 1.
I set the valid interval from 0 to 1 but, as help says, it's only checked for CHAR, NUMC, DEC, INT1, INT2 and INT4 data types. Not for DEC.
Then I use an event on ZVIEW. On SE11 I went to "Table maintenance generator" - Environment - Modification - Events. So there I put the 05 event (Creating a new entry) and I programed the check. It works fine for new entries, but if you have a record on table and you want to change the COEF field you can put there any number, even outside the 0-1 range.
I tried with the 01 event (Before saving the data in the database) but it seams to be called only for last record.
Could anybody tell me what can I do?
Thanks!Hi,
Since it is a Z TABLE..
You can directly modify the flow logic in SE51.
Go to SE51
Give the program name - SAPL + Function group name
Screen number
Press change..
In the flow logic..
Add a module after the FIELD ztable-number, in the PAI event..
Ex..
FIELD ZTABLE-NUMBER MODULE NUMBER_CHECK.
And in the module validate the number..
MODULE NUMBER_CHECK INPUT.
IF ZTABLE-NUMBER <> '0' OR
ZTABLE-NUMBER <> '1'.
MESSAGE E208(00) WITH 'Not a valid number'.
ENDIF.
ENDMODULE.
Thanks,
Naren -
Mandatory item validation at a page level?
Hi,
We have a page where the list of mandatory items changes according to how some 'key' items are set by the user e.g. if they select option 1 on item 1 we need a different set of mandatory fields than if they set option 2 - setting option 1 in item 4, may imply that some further items are mandatory, In addition, some items become mandatory due to circumstances known only on the database. We have in excess of 40 items on this page. Once all mandatory items are complete, the status of the page is saved as 'complete' - the user can always save the page as 'incomplete'.
We already have a database package that can check a table row to see if it is 'complete', it knows all the circumstances for when an items becomes mandatory and can produce a list of fields and the reasons why they have failed validation.
Is it possible to call this db package during page validation and use it to perform 'item' validations i.e. identify the invalid items and place the appropriate message inline with them?Hi,
You can create a pl/sql page validation where you call you procedure.
begin
package_k.proc_p(item1,item2,...,itemN);
end;
You should define the type of the validation, but it is very straight forward,
Regards,
Max. -
Error message 'not a valid PDF document'
Hi folks,
my Z10 has trouble opening some PDF documents sent as email attachment. When I try to open them the error message appears:
Important message
The document cannot be opened because it is not a valid PDF document
There is no BES10 Service involved in my environment. Mails are synced with with active sync.
OS Version: 10.2.0.429
Any suggestion appreciated.
Best regards,
RAUMPATROUILLEStuffit is the only app I know of which can decompress its own format. Your Windows clients must use the free Expander to open them. Otherwise, use OS X's built in zip compression and they'll be able to open the files without the need of third party software. Right click on any item, or group of items and choose, "Compress xxx Items" (how it will read if more than one item is chosen).
-
I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?
This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay. -
Hi ,
While creating a GR w.r.t. Purchase Order (MB01) getting a following msg:
"ENTER A VALID TRADING PARTNER "
In Vendor Master : Partner function has the vendor details
OA Ordering Address
VN Vendor
PI Invoice presented by
Any thread would be helpful .
regards,
chaitHi ,
THere is no entry in field :Trading partner LFA1 -
VBUND
ALso the vendor has acccount group : RMIT : Remit to Address
PArtner functions are maintained in vendor master viz. OA ,VN , PI .
regards,
chait -
Not valid month Error Ora 01843
hi
This is an error while running a report 6i. in Oracle 8i Environment.
"Not valid month Error Ora 01843"
This report is working fine in Production. But it is not working in Development Database.
Development database is the image of Production system.
Any reason for this Error?Dear Naseer C ,
We got similar experiences for several time.
We quried like that.
Selet moth from table;
08-AUG-1988
08-08-1988
08-08-88
We changed several time until diappear the message.
Hopefully, it will help you.
Best regards,
S!G -
Error/Warning while validating a mapping
I'm using OWB version 9.2 and database 9i.
I have few major problems in OWB. We have stage and star schemas on the same database instance. The source system is on a different database instance. There are database links created between target instance to source.
I have about 20 mappings; all validated, deployed and executed successfully about 2 weeks back.
Beginning of this week I logged on to OWB and tried to make some changes to one of the mappings. Before I made changes I tried to validate the mapping and I got following warnings:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
When I click on "View Details" it says I need to reconcile outbound of the staging table.
When I have not made any changes to the mapping why do I need to do this? I want to know under what circumstances do we get this message?
Another weird thing is I validated the mapping, after 15 minutes I tried to deploy this and still got the above warnings, although I had reconciled outbound and successfully validated the mapping. Am I missing something here?
Another problem is I have a mapping which loads a dimension from staging table. Very simple basic mapping all it does is dumps from staging table to dimension and key is generated by sequence generator. Both stage and star schemas are on the same database instance. When I try to validate this mapping it gives me error:
"VLD-2769: Database link is not allowed for data target <DIMENSION_NAME>" and when I click view details it shows following:
"Loading of data across database link is not supported. Deploy this mapping within the same database instance as the actual target and remove the database link access specification from the physical configuration of this data target operator."
I have not specified any database link or schema name in the mapping configuration; both stage and star schemas are on same instance. Although there are two instances that it works fine. First if I provide the schema name in the mapping configuration it gives me warning but deploys and executes fine. Secondly if I go to deployment manager, select the mapping and click deploy it validates successfully. Why do I get this error when I validate in the mapping editor?
I never had these problems before; all the mappings were validated, deployed and executed successfully.
I would like to know where/what could have gone wrong? Could any of you point me in the right direction? Any help would be greatly appreciated.
Thankshi.
ok look i also had this errors:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
this errors could be due to that something has change in the source database, in this case could be that somebody change the name column since the last time you did the load.
A possible solution is that you open the mapping (edit) and reconcile the tables both the table "from"(where the table came) and the table "to"(the table destination).
ooh and check the source system for any table that has changed, if it changed, so you have to load again the table.
bye -
Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer packageHello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
How can I open a PDF in my browser without downloading using Nitro Reader 3.5
I use Nitro PDF exclusively for PDF viewing. I cannot figure out how to open a PDF in the Nitro Browser instead of always having to download everything. Not only PDF documents but software updates as well. Nothing opens up without downloading first.
-
Entry of non-English characters into the db
Hi We are facing a problem in inserting non-English characters into the database.For example, we have a company name field which can accept German characters. This field has been defined as of varchar2 type of size 50 in the db. When we enter 49 Engl
-
Can anyone help me re transferring music
I want to copy the music that I have on my iphone and ipad into my existing itunes library but when I go to sync them it says that the music will be wiped off my device and replaced with the music from the library. Can anyone help? Thanks
-
getting message 'video card full" when trying to update imover 08 to 11...I have just updated to OS X10.7.5. What to do?
-
Any idea why I get an 'End of communication channel' error after using xslprocessor ? My session gets kill after using the xslprocessor.. I am using javaparserv2.jar 9.2.0.3