Bp was not displaying  and creating via ELM

I had done mapping format and external list successfully with green status.while checking bp via bp t.code ,here it show bp is not found.
  my doubt is after external list can i want to do any more steps.
regards
siva

Hi Siva,
If u only have done the step mapping formats and skiped the step maintain external list then u'll not able to create BP, What i understand from u r query is u only have done 1st step, next step is to maintain external list.
Once u mapped field properly maintain external list from CRMD_MKTLIST, give file path, define process step, metion u r mapping Format and save, immideatly after saving can see that u r ELM at succcess or not, in tab Data after mapping u can see the BP which is successfully created.
Refere below doc link for more details.
http://help.sap.com/saphelp_crm50/helpdata/en/14/98e24044b80b06e10000000a155106/frameset.htm
Reagards,
Dipesh.

Similar Messages

  • HT4044 Part of my iPad(1st gen) screen display does not show,hence I can only see it partially.It was not dropped and neither is it broken. Any help as I was told it cant be fixed and i hv 2 replace with a new unit i.e. pay in full as warranty is over? HE

    Part of my iPad screen display does not show. It was not dropped and neither is the screen broken. I was advised to see the local service provider for a diagnosis.
    I had finally managed to find time to find a local service provider last week (not easy) and was disappointed to be advised of Apple's policy of one for one exchange i.e. they wont repair and said that i would have to replace with a whole unit. As my unit is no longer under warranty, it meant that I had to pay for the full price of a new unit!
    I might as well have paid for the latest new unit but since my unit is only 2 years old at most, it would be a great waste of money.
    How can this be? Does this mean apple's product is inferior and do not last since warranty is only for one year?
    I sincerely hope there is a favourable solution otherwse my money is flushed down the drain.
    HELP!!!

    I was using my iPad last night, shut the power off and when I turned it on this morning 2/3 of the screen is not working.  It looks like the pandalela picture. What is the answer to fix this; is this a screen issue or and electronics issues.  Has anybody else experienced this?

  • I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created.

    I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message that X11 was not supported and directed to a sited to download XQuartz. Now when I try to launch WordSearch9 I get a message "X11 cannot be found.

    Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?

    Your report indicates Mountain Lion, but your footer indicates Lion.  I'll assume you're on 10.8.2; on the current Mountain Lion version.
    Rebooting is fine.
    The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox.  (But I don't know enough about that to be certain.)
    Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
    If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version.  (I'm assuming that site is where you got your Xquartz kit from, too.)
    I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz.

  • Date Format was not displayed correctly

    Hi All,
            We are developing WebDynpro Application successfully....but the date format was not displayed correctly.
    the RFC Date format is : 05/23/2007
    but in webdynpro we are getting date is wrong....we are getting date is : 09/05/2008.
    the below one is our coding for date display format.....
    public java.lang.String DisplayingDateFormat( java.lang.String date )
        //@@begin DisplayingDateFormat()
                        // Current date Format in BW
    SimpleDateFormat sdf = new SimpleDateFormat("MM.dd.yyyy");
    String ChangedDateFormat=null;
    try{
    //Parsing String to Date
    Date sqlDate =sdf.parse(date);
    Locale userLocale=WDClientUser.getCurrentUser().getLocale();
    DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.DEFAULT, userLocale);
    //Converting Date to String
    String newDateString = dateFormat.format(sqlDate);
    ChangedDateFormat=newDateString;
    I mention my user country is Germany.
    can u tell me any one why we are getting wrong date.....
    Really i appreciate.
    Thanks and Regards,
    Abhiram.

    Too bad you can not offer yourself points. LOL

  • IKEpacket from x.x.x.x was not encrypted and it should have been

    New to the group and I do have a situation that I hope someone can help me with. I am trying to set up a lab for one of my courses and I am using XP with Cisco VPN Client 5.0.0.3, a Cisco 2621XM router and Cisco Secure ACS version 4.2 configured for RADIUS.
    My problem is this, when I open the VPN client and click connect I get the following message back.
    *Mar 1 01:21:49.935: %CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE packet from 11.11.11.14 was not encrypted and it should've been. The packet is not getting past the router so I cannot even see if the ACS is working.
    I have searched high and low and have not been able to find an answer to the problem. Can someone here give me a hand?

    I used the configuration from an example from the Cisco website. I will post it here. I also followed the setup outlined in the example for the ACS but it doesn't seem to get that far. Thanks for the help.
    !--- Enable AAA for user authentication and group authorization.
    aaa new-model
    !--- In order to enable extended authentication (Xauth) for user authentication,
    !--- enable the aaa authentication commands.
    !--- "Group radius" specifies RADIUS user authentication.
    aaa authentication login userauthen group radius
    !--- In order to enable group authorization,
    !--- enable the aaa authorization commands.
    aaa authorization network groupauthor group radius
    ip subnet-zero
    ip audit po max-events 100
    !--- Create an Internet Security Association and
    !--- Key Management Protocol (ISAKMP) policy for Phase 1 negotiations.
    crypto isakmp policy 3
    encr 3des
    authentication pre-share
    group 2
    !--- Create the Phase 2 policy for actual data encryption.
    crypto ipsec transform-set myset esp-3des esp-sha-hmac
    !--- Create a dynamic map and
    !--- apply the transform set that was created.
    crypto dynamic-map dynmap 10
    set transform-set myset
    !--- Create the actual crypto map,
    !--- and apply the AAA lists that were created earlier.
    crypto map clientmap client authentication list userauthen
    crypto map clientmap isakmp authorization list groupauthor
    crypto map clientmap client configuration address respond
    crypto map clientmap 10 ipsec-isakmp dynamic dynmap
    fax interface-type fax-mail
    mta receive maximum-recipients 0
    !--- Apply the crypto map on the outside interface.
    interface Ethernet0/0
    ip address 10.1.1.1 255.255.255.0
    half-duplex
    crypto map clientmap
    interface Serial0/0
    no ip address
    shutdown
    interface Ethernet0/1
    ip address 172.18.124.159 255.255.255.0
    no keepalive
    half-duplex
    !--- Create a pool of addresses to be assigned
    to the VPN Clients.
    ip local pool ippool 10.16.20.1 10.16.20.200
    ip classless
    ip route 0.0.0.0 0.0.0.0 10.1.1.2
    ip http server
    ip pim bidir-enable
    !--- Specify the IP address of the RADIUS server,
    !--- along with the RADIUS shared secret key.
    radius-server host 172.18.124.96 auth-port 1645 acct-port 1646 key cisco123
    radius-server retransmit 3
    call rsvp-sync

  • Page0 item won't display; Error: Item "P0_X" was not displayed

    Hello,
    On Page0 (which is rendered for every page in the app) I have an HTML area with some text (If you encounter any errors, please....) and a few links (email/feedback, etc) defined in a table structure and that displays fine. This is rendered in the "above header" section at the top of ever app page.
    I thought I would add another HTML area with a navigation tool up there, so I tried to put an item into the new area where a user could type in a menu shortcut, but when I put the item up there and load a page in the app, I get an error:
    Error: Item "P0_Jumpto" was not displayed because the HTML form was not yet opened.
    Why is that? Can I put such an item on Page0? I don't want to have to define this structure on every page...

    So close, but...
    In this case P0_X is a page alias, because people in general don't remember 192 as well as they would REPT. The problem is that EVERY page has an alias to standardize bug and enhancement reporting, and navigation tools (example: I have a problem with page REMD; the column.....) - - but not every page should "jumped" to by the method described of entering the page alias.
    There needs to be a lookup table that indicates which are and which are not acceptable candidates to jump to. I've already got the table populated so I was thinking a "where EXISTS" condition on the application process, but the condition for this applicatin process is already used by Request=Expression 1...how can I add that second condition or can you suggest another method?

  • Apple Logo would not display and Hardware test problem?

    HI all, sorry i am new to posting here, so apologize if my answer to the below is in this forum but i could not find it. What it is:
    My mac mini when I started it up today, was not displaying the apple logo, it was just showing its white screen and it just would not move from it. I tried doing an apple hardware test by re-starting holding the button D while re-starting nothing happen. I had to disconnect all external items such as my external HD and ipod and then it became back to normal.
    1st question is, why did this happen and how?
    2nd question is, how come my apple hardware test does not work?
    I have tried apple hardware test using the install disc for a mac pro which has leopard on it, for my mini as i don't have the install for my mini any more. But even then I should still be able to use the apple hardware test without the discs though shouldn't i?
    Please note though my HD has been replaced twice before by apple. Can anyone give some input?
    Also my mac is an intel based back got its late 2006 model.
    I have also run disk utility and it has found nothing wrong at all with my mac.
    Thanks in advance for your replies.

    If AppleCare gives you a Tiger Install Disc for your system, accept it, since it's the way to perform the AHT on your machine (also, it's free!).
    About the Leopard disc, I don't know which OS you're running, since you changed your profile info from 10.5.6 to 10.4.10. Are you using Tiger Or Leopard?
    If you're running Leopard, you'll need a Retail Leopard Install Disc (the one you can pick up from a store shelf) to do an Archive and Install. Your machine was made in 2006, before the release of Leopard, so there's no Leopard machine specific disc for your model.
    Archive and Install is the way to reinstall the Operative System without loosing your files and settings.
    Also, if you ever need to repair your startup volume with Disk Utility, you'll need to boot from the install DVD, and you can only do it with the install disc of the OS you're currently running. You can't use a previous version OS install disc, as it could have nasty consequences on the directory structure integrity.
    If you want an "el cheapo" Leopard Retail Disc, you can search for it on the web. Also, when Snow Leopard hits the street, some retailers will probably sell out the previous version inventory.
    Good Luck.

  • I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

  • When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

    When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    Is it this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Otherwise:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have tried several times to install iTunes update 11.1.4 on my PC.  I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126).  I am told to reinstall iTunes, but nothing changes

    I have tried several times to install iTunes update 11.1.4 on my PC.  I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126).  I am told to reinstall iTunes, but nothing changes.  What next?  I've not had this problem with other updates requested by Apple.

    I have also had the same problem with my Win 7 32 bit computer.  I had great help from Apple techs in Montreal and Orlando for 2.5 hours.  They helped me remove every trace of Apple products and clean the registry in two different ways.  Each install gave the same problem!  If Apple techs can't fix it (on some of our machines) then we are really in trouble.  They promised to raise it with the "engineers" and get back to me with a solution.  I am waiting and hoping.  Otherwise maybe version 11.1.5 will have a fix ??

  • My lab top,while browsing on internet site,got stucked. The cursor was not moving and I was unable to close down the laptop. Finding no alternative I just pressed and held the startup switch for a few seconds and got it closed but can,t restart. Help plse

    I can not start the device after I shut it down by pressing & holding the start button. I took this measure because I was not able to force quit/shut down while on internet. The program was not responding and laptop got hot.. Any body help please....
    Aarzu

    If a SMC reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a FREE evaluation.
    http://support.apple.com/kb/ht3964
    Ciao.

  • HT1296 when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    Thanks for your advice. However my private informations have nothing to do on a wandering cloud that floats on high over US vales and hills ( and credit to William WORDSWORTH for his poetry)

  • Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for