BPA errors

Hi All 
i have BPA errors on one of my domain controller. should worry about the errors or BPA errors can be ignored. i went through MS articles to fix them but not having any luck. cam some one confirm following errors can be ignored?

Hi,
According to the error message, it seems that the DNS server configuration is not correct.
DHCP: The IPv4 addresses of the DNS server should be reachable
It is due to the DNS server defined in DHCP scope is not reachable. Please configure a different DNS server as a scope option or server option using the DHCP MMC. More information:
DHCP: The IPv4 addresses of the DNS server should be reachable
DNS server on Public shoud include the loopback address, but not as the first entry.
Please configure network adapters on the DNS server in TCP/IPv4 to use the loopback address 127.0.0.1 as one of the DNS servers, but not as the first DNS server on the list. For more detailed steps, please refer to the link below:
DNS: DNS servers on <adapter name> should include the loopback address, but not as the first entry
If you have anything unclear or the suggestions above are not helpful, please post the result of running "ipconfig/all" at the command prompt on this DC.
Best regards,
Susie

Similar Messages

  • Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

    Hi,
    I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
    The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
    on this service won't be able to start
    Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
    Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
    Hopefully someone out there has had the same issue and can assist.
    Pete

    Hi Pete,
    For the first error message, please try the following steps:
    Make sure the Information Store service is in Starting status,
    Automatic startup type and works well, as a test we can try to
    restart the Infroamtion Store service and verify the service works well.
    Start
    Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
    files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
    location is accessible;
    Start
    Registry Editor, and locate the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
    Use the
    Permission option under the Security tab to check the permission setting on this key. Make sure
    System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
    it has Full Control permissions. Please refer to this article:
    Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
    Link:
    http://support.microsoft.com/kb/285116
    Start
    ADSI Edit, and then browse to the following location:
    Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
    Right-click the
    server name, and then click Properties.
    Click the
    Security tab, make sure this own server’s server object have
    full control permission on its own server.
    If not or the object is missing, please modify the permission or click
    Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
    Click OK, and then close ADSI Edit.
    Use
    Active Directory Users and Computers to add the current affected
    Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
    Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
    http://support.microsoft.com/kb/297295.
    Restart the Exchange Server computer, then rerun the ExBPA.
    For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
    this message, it will not affect the Exchange servers.
    Regards, Eric Zou

  • DNS Client not Configured

    Hello,
    I have reviewed a number of other posts regarding this BPA error but have not found a specific solution.
    Receiving the BPA Error: The DNS Client is not configured to point to the internal IP Address of the Server
    If the DNS is currently functional, is this required? As a general practice, if it is working, don't change it....
    If required, can someone list the steps to change this?

    Hi:
    The reason the Server should be the DNS server is to maintain _internal_ DNS so each station can find the server and each other. The Internet will work if the setting on the station can find a DNS server that can find the upstream DNS servers.
    The way this is meant to work is the stations and the server query the DNS server on the Essentials server.  If it knows the name to IP translation, as it should for LAN queries it will provide the results.  If it does not, as it most likely would
    not in the case of a new internet search, is uses forwarders or root hints (look up those terms if you don't recognize them) to find the name to IP translation and send it back to the station.
    If you use DNS servers outside the LAN the usual results are slow startup times and slow network browsing.
    Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

  • AacPlus (v8.0 Engine) The Best

    Here is tips for those who have Nokia Phones that support aacPlus format.
    DO NOT USE NOKIA MUSIC MANAGER TO CONVERT TO AAC, ITS NOT GOOD.
    1. Download Easy CD-DA Extractor v10.0.5 Professional
    2. Convert Songs to:
    aacPlus
    44100Hz
    Stereo
    32 Kb/s
    It uses aacPlus v8.0 Encoding Engine.
    You can save more space on your Nokia Handset & the Quality is 100% same as MP3 in 192, Stereo 44100Hz kb/s
    Enjoy People.
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

    Hi Weidyc,
    Your problem must is the know issue, please Remove, disable, or set to "Not Configured" the following Group Policy setting that is being applied to the server with
    the BPA error.
    Computer Configuration\Administrative Templates\Windows Components\Windows PowerShell
    Turn on Script Execution
    The BPA will start working once the policy change applies. No reboot is required for the change to take effect.
    The related KB:
    Error "The Best Practices Analyzer scan has failed" when running Best Practice Analyzer on Windows Server 2008 R2
    http://support.microsoft.com/kb/2028818
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Unable to run the local bussiness server - Error during startup of BPA

    When i installed the BPA tool and started the 'LOCAL' server in oracle BPA Network. I am getting an error saying 'Unable to run the local bussiness server'. Then i checked the log and found the foolowing errors. Please suggest !
    LoG File 1:-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    2009-03-10 22:18:53,199     [ ARIS Server Site Startup process ]
    2009-03-10 22:18:53,199     
    2009-03-10 22:18:53,324     Started profile Private@17057
    2009-03-10 22:18:53,324     Started profile Public@17055
    2009-03-10 22:18:53,324     Started profile Agent@17058
    2009-03-10 22:18:53,339     
    2009-03-10 22:18:53,339     Starting ARIS Nameservice 10.1.3.4.271679(Public)
    2009-03-10 22:18:53,339     
    2009-03-10 22:18:53,339     Starting ARIS Eventservice 10.1.3.4.271679(Private)
    2009-03-10 22:18:53,355     
    2009-03-10 22:18:53,355     Starting ARIS Nameservice 10.1.3.4.271679(Private)
    2009-03-10 22:18:53,355     
    2009-03-10 22:18:53,355     Starting DB event initialisation 10.1.3.4.271679(Private)
    2009-03-10 22:18:53,417     - event channel is created
    2009-03-10 22:18:53,433     
    2009-03-10 22:18:53,433     Starting Aris LockService 10.1.3.4.271679(Private)
    2009-03-10 22:18:53,433     - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
    2009-03-10 22:18:53,448     - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
    2009-03-10 22:21:53,459     Launch of Aris LockService failed!
    2009-03-10 22:21:53,459     
    2009-03-10 22:21:53,459     [ There have been ERRORS, ARIS Server Site is going down ... ]
    2009-03-10 22:21:53,459     Terminating ARIS Server Site ...
    2009-03-10 22:21:53,459     Shutting down DB event initialisation ...
    2009-03-10 22:21:53,475     Shutting down ARIS Nameservice ...
    2009-03-10 22:21:53,475     Shutting down ARIS Eventservice ...
    2009-03-10 22:21:53,475     Shutting down ARIS Nameservice ...
    2009-03-10 22:21:55,487     ARIS Server Site terminated!
    2009-03-10 22:21:55,487     
    2009-03-10 22:21:55,487     [ ARIS Server Site is down ]
    2009-03-10 22:21:55,487     
    2009-03-10 22:21:58,498     Terminating ARIS Server Site ...
    2009-03-10 22:21:58,498     ARIS Server Site terminated!
    2009-03-10 22:59:48,606     
    2009-03-10 22:59:48,606     ARIS Server Site
    2009-03-10 22:59:48,606     (c) 2005 IDS Scheer
    2009-03-10 22:59:48,606     
    2009-03-10 22:59:48,606     
    2009-03-10 22:59:48,606     [ ARIS Server Site Startup process ]
    2009-03-10 22:59:48,606     
    2009-03-10 22:59:48,762     Started profile Private@17057
    2009-03-10 22:59:48,762     Started profile Public@17055
    2009-03-10 22:59:48,762     Started profile Agent@17058
    2009-03-10 22:59:48,762     
    2009-03-10 22:59:48,762     Starting ARIS Nameservice 10.1.3.4.271679(Public)
    2009-03-10 22:59:48,777     
    2009-03-10 22:59:48,777     Starting ARIS Eventservice 10.1.3.4.271679(Private)
    2009-03-10 22:59:48,793     
    2009-03-10 22:59:48,793     Starting ARIS Nameservice 10.1.3.4.271679(Private)
    2009-03-10 22:59:48,793     
    2009-03-10 22:59:48,793     Starting DB event initialisation 10.1.3.4.271679(Private)
    2009-03-10 22:59:48,855     - event channel is created
    2009-03-10 22:59:48,855     
    2009-03-10 22:59:48,871     Starting Aris LockService 10.1.3.4.271679(Private)
    2009-03-10 22:59:48,871     - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
    2009-03-10 22:59:48,887     - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
    2009-03-10 23:02:49,309     Launch of Aris LockService failed!
    2009-03-10 23:02:49,309     
    2009-03-10 23:02:49,309     [ There have been ERRORS, ARIS Server Site is going down ... ]
    2009-03-10 23:02:49,309     Terminating ARIS Server Site ...
    2009-03-10 23:02:49,309     Shutting down DB event initialisation ...
    2009-03-10 23:02:49,309     Shutting down ARIS Nameservice ...
    2009-03-10 23:02:49,309     Shutting down ARIS Eventservice ...
    2009-03-10 23:02:49,309     Shutting down ARIS Nameservice ...
    2009-03-10 23:02:51,321     ARIS Server Site terminated!
    2009-03-10 23:02:51,321     
    2009-03-10 23:02:51,321     [ ARIS Server Site is down ]
    2009-03-10 23:02:51,321     
    2009-03-10 23:02:54,332     Terminating ARIS Server Site ...
    2009-03-10 23:02:54,332     ARIS Server Site terminated!
    Error Log 2:Exception
    2009-03-10 18:19:39,019     com.idsscheer.aris.server.Exceptions - Launch failed!
    com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
    com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
         at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
         at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
         at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
    Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
         ... 6 more
    Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
         at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
         at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
         ... 7 more
    Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
         ... 10 more
    2009-03-10 18:28:52,307     com.idsscheer.aris.server.Exceptions - Launch failed!
    com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
    com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
         at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
         at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
         at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
    Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
         ... 6 more
    Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
         at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
         at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
         ... 7 more
    Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
         ... 10 more
    2009-03-10 22:21:53,459     com.idsscheer.aris.server.Exceptions - Launch failed!
    com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
    com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
         at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
         at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
         at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
    Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
         ... 6 more
    Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
         at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
         at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
         ... 7 more
    Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
         ... 10 more
    2009-03-10 23:02:49,309     com.idsscheer.aris.server.Exceptions - Launch failed!
    com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
    com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
         at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
         at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
         at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
         at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
    Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
         at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
         ... 6 more
    Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
         at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
         at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
         at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
         ... 7 more
    Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
         at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
         at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
         ... 10 more
    ----------------------------------------------------------------------------------------------------------------------------------------------

    S1:I uninstalled BPA.
    S2: I installed BPA again using the default options by selecting all the default options that the BPA showed during installation. EG. I selected 'Oracle Lite' which was by default an option.
    S3: After BPA installation, I also installed BPA Publisher which i had not done last time.
    S4: Restated my system and it all works gr8 now.
    Actually, the BPA Publisher creats a Repository area so it should have been installed along with the BPA installation. And Since a Repository area was not found it was giving this error message again and again.
    Now its all fine . Hopefully, some one else will learn from my mistakes.

  • JDeveloper to BPA Suite Error

    Hi there,
    when I try to save my model to the bpa server in JDeveloper I get the following error: (Update BPMN Model checked)
    java.lang.Exception: script ModelImport.js, line 141: Jdeveloper proposed model available in Oracle Business Process Architect, please accept or reject the proposed model. (ModelImport.js#141)
         at oracle.bpa.remote.RepositoryService.importt(RepositoryService.java:216)
         at oracle.tip.tools.ide.pm.modules.outliner.bpaserver.connections.BPAServer.saveToServer(BPAServer.java:484)
         at oracle.tip.tools.ide.pm.modules.outliner.app.UploadDialog.executeUpload(UploadDialog.java:319)
         at oracle.tip.tools.ide.pm.modules.outliner.app.UploadDialog$1.run(UploadDialog.java:191)
         at java.lang.Thread.run(Thread.java:595)
    Although the BPA Suite notifcates me that the IT updated the process, there are no improvement proposals.
    Has anybody had the same error? Is there a solution or workaround?
    Thanks,
    Stefan

    Have you teested teh IIOP connectivity with the session shell
    (sess_sh)? Make sure that this works. The Connection URL will
    look like:
    sess_iiop://machine_ip_address:port:SID
    If you are going through the listener (and the listener must be
    configured to listen for IIOP) or like this:
    sess_iiop://machine_ip_address:port
    If you are going directly to the MTS Dispatcher port. You can see
    what this port is by using the following command:
    LSNRCTL services
    See which port the presentation
    oracle.aurora.server.SGiopServer
    is on and use that port number. You do not use a SID when
    connecting directly to the MTS dispatcher port since an MTS
    dispatcher is specific to a given instance.
    null

  • Error When Creating BPA Server Connection in Jdeveloper

    Hi,
    I am trying to explore the concept of BPA Suite. I have created a BPMN process and enabled the option 'Share Blueprint with' under SOA. But when i am trying to make a BPA Server Connection in JDeveloper it is showing error like 'Connection Failed'. I am using Local Repository. Could you please help me on this issue.
    Thanks,
    Anju

    Yes, you can choose XE at installation time for the LOCAL database in BPA (ARIS). And, since you say you do connect from BPA before trying to connect from JDev, we know the database is up.
    One more thing to check is that both are the same version (10.1.3.4, hopefully).
    When do you see the connection failed during the setup? It is after you select "local server"? That is, can you see your BPA database (project) show in the drop down and you get the error when you enter the BPA credentials? Or, do you get the error selecting local server in the first place? If so, you should see if you can get a Database connection from JDev to the database on XE - it may be that JDev can't find the database for some reason (proxy settings perhaps).
    Heidi.

  • Error Processing Purchase DF-BPA-09

    I keep getting this Error message whenever i try to download from Google, but....
    I have seen on a Google site how to fix it, it says....
    - Tap on settings.
    - Select applications.
    - Select all option.
    - Click on Google service frame work.
    - Tap on clear data.
    - Click on OK option.
    - Check your issue might have solved.
    So i tapped on setting, and there is on application, only apps. So i tappen on apps, and you cannot select anything, so what shall i do now?
    Solved!
    Go to Solution.

    I think you have misunderstood the instruction tap on Settings on your phone not the Play store
    So open Settings then Apps and swipe to All then locate and open Google service frame work then tap on Force stop then Clear cache and Clear data then reboot and test the app in question
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • No data in Business Process Analytics after setting up BPA and BPMon

    Hi,
    I have followed the BPA set up guide and done all the configuration for BPA. I have set up BPMon for a solution and in the logical component node i have done configuration for many application monitors.
    Also in the "Load Master Data" node the master data is loaded. But still in BPA when I am selecting the time frame and applying it I am getting a message that no data is applicable in the selected time frame.
    How can i get the data in BPA.

    Hi Vishal,
    1435043 - E2E Workload Analysis - No applicable data found
    specially section 3) EFWK Resource Manager Job, wehre you find several
    hints to check this job and the EFWK Adminsitration.
    Also check note: 894279 Background processing in SAP Solution Manager
    Please have a look at following chapter of the the BPA Setup
    guide to fully understand the data flow in this application:
    2 Architecture of Business Process Analytics
      > 2.1 Data Retrieval and Reporting
    Please also review following chapter, in to see if there are any errors
    extracting the data from the managed systems to SAP Solution Manager:
    3.2.3 Checking status of Solution Manager Diagnostics Extractor
    Framework (EFWK)
    Also check:
    1570282, 1643303 and 1602437
    thanks
    Regards,
    Vikram

  • Purchasing Document Open Interface Error - Blanket Purchase Agreement

    Hi all.
    I have a problem creating a blanket purchase agreement through the interface. What i did was this:
    INSERT INTO po_headers_interface (interface_transaction_id,
    batch_id,
    interface_source_code,
    process_code,
    action,
    group_code,
    org_id,
    document_type_code,
    document_num,
    currency_code,
    agent_id,
    vendor_id,
    vendor_site_id,
    ship_to_location_id,
    bill_to_location_id,
    approval_status,
    amount_agreed,
    effective_date,
    expiration_date)
    VALUES
    INSERT INTO po_lines_interface (interface_line_id,
    interface_header_id,
    action,
    line_num,
    line_type,
    line_type_id,
    item_id,
    category_id,
    quantity,
    unit_price,
    taxable_flag,
    tax_code)
    VALUES
    Then i run from the application "Import Price Catalogs" to import the BPA.
    I get this error in po_interface_errors: "No corresponding Blanket Agreement line available for this Price Break record. (COLUMN_NAME=SHIPMENT_NUM)"
    I mention I don't want to create a price break for the BPA i just want to create the line for the BPA. Anyone knows what I am doing wrong????
    I also got other errors b4 but I could resolve them.
    Thanks for any help on this.
    Edited by: user9525262 on Feb 14, 2012 12:08 AM

    Guys I found It out!!!!!! YEEEEEEEEE!
    It was because the quantity values. The lines on BPA doesn't accept any quantity on it.
    I write this because I searched the internet alot and the forums about this problem who also others had and now they can see where in fact the problem lies.
    Have all a nice day.
    Edited by: user9525262 on Feb 14, 2012 12:35 AM

  • Summary Network Report Generation Error

    I am running SBS 2011 and have recently stopped getting the Network Summary Reports. When I go into the log I see the following error:
    2014-05-12T03:15:00.245868 : ***************** Starting GenerateMonitoringReport task... *****************
    2014-05-12T03:15:00.246868 : Generating Summary Network Report...
    System.NullReferenceException: Object reference not set to an instance of an object.
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.FirewallInformation.GetFirewallStatusFromMonitoringStore(String computerName)
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySectionSecurityCenterPart(ReportSection section)
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateSecuritySection()
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.ReportGenerator.GenerateReport(ReportConfiguration config)
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.GenerateReportTask.Run()
       at Microsoft.WindowsServerSolutions.SystemHealth.Monitoring.SBSTask.StartTheTaskStub()
    This error happens every time the report is generated. Any help resolving this would be much appreciated.

    Hi Rory Christian,
    Would you please let me confirm whether it’s SBS 2011 Essentials or SBS 2011 Standard?
    If it’s SBS 2011 Essentials, and you have installed Update Rollup 2. Please use following Hotfix and check
    if help you to solve this issue.
    You receive the warning "Computer Monitoring Error"
    in Windows Small Business Server 2011 Essentials after you install Update Rollup 2
    If this issue still persists or it’s SBS 2011 Standard, please run
    SBS BPA and fix all that it can find. Then monitor the result. Meanwhile, please open Event Viewer and check if you can find more clues.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Moving public folders from exchange 2003 to exchange 2010 error while moving replicas

    Dear All,
    i am in the process of migrating from Microsoft Exchange 2003 to Exchange 2010,
    i am done with moving all the mailboxes 300 mailbox almost with a 1.5 TB DB with no issues 
    when i tried all the processes, procedures, instructions and forums to move the public folder or 
    to use move all replicas from Exchange 2003 to Exchange 2010 i always get errors , now when i try 
    to open PF Management console from the exchange 2010 server i get it but it is disconnected
    then i can choose to coneect to the new server name EXCHANGE2010 with no issues
    when i try to expand the default folder and system folder i get the following error.
    OAB is set on the new server as default.
    when i try to add replica using power shell i get this error:
    WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an inst
     of an object.
    Object reference not set to an instance of an object.
        + CategoryInfo          : NotSpecified: (:) [Get-PublicFolder], NullReferenceException
        + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
    following error when trying to expand PF on EXCHANGE 2010
    Microsoft Corporation
    Microsoft® Windows® Operating System
    6.0.6000.16386
    Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''.
    Microsoft.Exchange.Configuration.MonadDataProvider.CommandExecutionException: Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''. ---> System.NullReferenceException: Object
    reference not set to an instance of an object.
       at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.GetMapiPublicFolderDatabasesIdentities(ADSystemConfigurationSession configurationSession, ADObjectId serverId, TaskErrorLoggingDelegate errorHandler)
       at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ValidateServerContainsPFDatabase(Server server, ADSystemConfigurationSession scSession, TaskErrorLoggingDelegate errorHandler)
       at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ResolvePublicFolderServerAndUserLegacyDNs(ADSystemConfigurationSession scSession, ServerIdParameter serverIdParameter, String& serverLegacyDN, String& userLegacyDN, Fqdn& serverFQDN,
    TaskErrorLoggingDelegate errorHandler)
       at Microsoft.Exchange.Configuration.Tasks.GetMapiObjectTask`2.CreateSession()
       at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.InternalStateReset()
       at Microsoft.Exchange.Configuration.Tasks.GetTaskBase`1.InternalStateReset()
       at Microsoft.Exchange.Management.MapiTasks.GetPublicFolder.InternalStateReset()
       at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
       at System.Management.Automation.CommandProcessor.ProcessRecord()
       --- End of inner exception stack trace ---
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.ClosePipeline(MonadAsyncResult asyncResult)
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.InternalEndInvoke(IAsyncResult results)
       at Microsoft.PowerShell.HostingTools.PipelineProxyBase.EndInvoke(IAsyncResult results)
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadCommand.EndExecute(MonadAsyncResult asyncResult)
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Close()
       at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Dispose(Boolean disposing)
       at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
       at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
       at Microsoft.Exchange.Management.SystemManager.DataTableLoader.Fill(RefreshRequestEventArgs e)
       at Microsoft.Exchange.Management.SystemManager.DataTableLoader.OnDoRefreshWork(RefreshRequestEventArgs e)
       at Microsoft.Exchange.Management.SystemManager.RefreshableComponent.worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Microsoft.ManagementConsole, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    MMCFxCommon, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Microsoft.Exchange.Management.PublicFolders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Management.SystemManager, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Microsoft.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Common, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Configuration.ObjectModel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Microsoft.Exchange.Diagnostics, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Microsoft.Exchange.Data.Directory, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Drawing.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Microsoft.Exchange.ManagementGUI.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Isam.Interop, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Transport, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    BPA.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    BPA.UserInterface, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Interop.adsiis, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Interop.Migbase, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.DKM.Proxy, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.AirSync, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Approval.Applications, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.CabUtility, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Cluster.Replay, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Configuration.RedirectionModule, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.ApplicationLogic, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Mapi, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Providers, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.Storage, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.EdgeSync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.EdgeSync.DatacenterProviders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Extensibility.Internal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.InfoWorker.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Live.DomainServices, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.MailboxReplicationService.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.MessageSecurity, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.MessagingPolicies.Rules, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Net, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Rpc, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Search.ExSearch, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Search.Native, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.StoreProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Agent.AntiSpam.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Agent.SenderId.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Logging.Search, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Sync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.UM.UMCommon, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.UM.UmDiagnostics.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Rtc.Collaboration, Version=3.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Rtc.Media, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    MSExchangeLESearchWorker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Core.Strings, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Core.Strings.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.HelpProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    pspluginwkr, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    System.Management, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Accessibility, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    MMCEx, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Anonymously Hosted DynamicMethods Assembly, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
    Microsoft.Exchange.Data.Directory.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Data.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    Microsoft.Exchange.Configuration.ObjectModel.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
    i will be thankful for any assistant.
    PF DB is arounf 90 GB with alot of public folders and sub-folders. around 60 mail PF and too many subfolders.

    First and the most important thing you need to do is, upgrade exchange 2010 to SP2 and RU5.
    Exchange 2010 RTM support is long gone.
    http://www.microsoft.com/en-us/download/details.aspx?id=36768
    http://www.microsoft.com/en-us/download/details.aspx?id=41480
    Your exchange 2010 is still in stogeage ;)
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

    Hello,
    We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML.  It seems to me that some certificate
    might be invalidated. Can anyone please point me in the right direction? 
    Thanks, 
    Mitul
    TF215097: An error occurred while initializing a build for build definition :
    Exception Message: One or more errors occurred. (type AggregateException)
    Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
    at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
    at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
    at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
    at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
    at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
    Inner Exception Details:
    Exception Message: An error occurred while sending the request. (type HttpRequestException)
    Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
    at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
    Inner Exception Details:
    Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
    at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
    Inner Exception Details:
    Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
    Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
    at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

    Hi Mitul,
    Thanks for your reply.
    It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
    Please share your TFS Server detailed environment information here. And share your
    Build Service Properties dialog screenshot here.
    Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
    Clean the Cache folder on Server machine. The folder path is:
    C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.  
    After cleaned, on Server machine, click Start and select
    Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
    Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error while converting BPMN to BPEL in Business Process Architect

    Hey,
    I am using Business Process Architect 11gR1 where I have modeled my process. Now that I have to move this model to BPM, I am using the option SOA -> share blueprint with IT in BPA. A dialog appears that asks to validate the model. I confim with "Yes" and it shows the conversion progress bar but after the while an error appears (a java exception). A report opens in my browser that has the following message
    Validation of a service-oriented BPMN model in Oracle BPA Suite
    Structure rules for BPMN in Oracle BPA Suite
    Rules for a service-oriented BPMN model in Oracle BPA Suite
    String not found: RULEKIND_NAMEd89733d0-d605-11db-0505-000fb0c4ad32
    The java exception is "Error while creating report:
    report: oraclebpmn2bpel, line 632
    Type error: cannot find function getErrNo in object.java.lang.IllegalArgumentException. (oraclebpmn2bpel#632)
    can anyone please help me as to why this happens and how it can be sorted out?
    Edited by: user10303310 on Dec 13, 2011 3:10 AM

    Hi Julika,
    The error message might not be related to the activities itself. I assume your model is not well structured. Consider that the following points aren't disregarded:
    * Never "jump" out of a particular branch into a different part of the model or into another branch
    * All functions/events have only one incoming/outgoing connection
    * Process parallel flows should be specified by splitting and joining AND/XOR rules, or they should contain either one splitting AND/XOR rule only for which there is no other connection between their paths, or one joining AND/XOR rule only that is met by all connections.
    Let me know if it did not help to fix your problem.
    Best regards,
    Danilo

  • Error message when downloading from Google Play Store

    After recently doing the toshiba system update for my AT300-32gb tablet I now get the following error message when downloading free apps from Google Play Store -Error processing purchase {DF-BPA-13].
    Automatic update for downloaded apps no longer works either. Anyone have a solution to this? 

    Go into your settings and touch "apps" on the left. Then touch "Google Play services" and tap "Clear data" and "Clear cache." Then touch "Apps" again on the left. Now do the same for the "Google Play Store" entry. Then hold down the power button until it asks if you want to turn it off. Go ahead and turn off the tablet. Then turn it back on and try again.
    - Peter

Maybe you are looking for

  • I can't get safari to open at all

    double click on it, highlights icon for a moment, and then nothing happens. not an internet connectivity issue. identical mac next to it does not have the problem. any ideas???

  • Text & speed

    hi there... just 2 stupid questions 1.- i apply an animated mask to dynamic textfield but i have to load the text for every keyframe to show it and it looks like a blinking text, any idea to load the text only once? 2.- i apply animated masks to movi

  • Mac Pro randomly goes into sleep mode

    My (mid 2010) Mac Pro, OS X.6.8, randomly goes into sleep mode and I can't wake it, have to power it off and reboot. Just started to the best of my knowledge Friday (Jan 6, 2012) I've had it happen surfing the web in Safari, while working on an illus

  • How to overwrite channels in diadem 9.0

    Wie kann man in Diadem 9.0 Kanäle manuell oder per VBS-skript überschreiben?

  • Backup unknown error

    My iPhone appears to sync correctly but will not complete with a backup. I receive the following error..."iTunes could not back up the iphone "xxxxxxx" because an unknown error occured (-20). I have tried resinstalling all apple software, rebooted my