BPA suite 11g and Jdev 10g

hello,
BPA11G is also compatible with JDEV10 ? I can use Jdev 10g with BPA suite 11g or not ? or we must install Jdev 11g ? (send a document about this)
BR,

Hi,
please install the JDeveloper 11g and apply the newest "BPA Extension for JDeveloper". Install the BPA Extension using the JDeveloper Update Center. From the JDeveloper menu choose Help > Check for Updates. Browse and pick the pcbpel_bundle.zip found in the Oracle BPA Suite 11g Addons.
It is necessary to keep the JDeveloper and BPA Suite version consistent, especially for the major releases 10 or 11. This is because in 11g a BPEL process is part of a SOA Composite, which means the technical concept has been changed as well.
Best regards,
Danilo

Similar Messages

BPA Suite 11g Installation halts at Step 10

Hello,
I have downloaded BPA Suite 11G from OTN. The installation of BPA suite halts at step 10. No error occures. I was waiting for 10-15 minutes to finish the installation. I am using 11G data base installed along with R12.1 on the virtual machine.
Please advise.
Thanks,
Pankaj

Thanks Ashish,
I checked the charsets and tried to update the database charset to match it with BPA suite documentation. However, could not update it as the documentaton charset was not super set of database charaset.
However, after restarting the computer and database the issue got resolved.
Thanks again for your help,
Pankaj

"Oracle BPM Suite 11g" and "Oracle SOA Suite 11g" components

Dear Friends,
I am very confusing about the "Oracle BPM suite 11g" and "Oracle SOA Suite 11g" and would like your help on explanation as the following :
I have learn that In order to use "Oracle BPM Suite 11g" require to have "Oracle SOA Suite 11g" components to install first. Does it means that :
1) When we buy "Oracle BPM Suite 11g" , we automatically get the "Oracle SOA Suite 11g" components as well ?
2) IS it correct that these " these Oracle SOA Suite 11g components" are included :
(a) Oracle BAM
(b) Oracle Business Rules
(c) Oracle BPEL Manager
(d) Oracle Service Bus
(e) Oracle Complex Event Processing
3) Do we have a right to use all of these components listed in (2) ?
4) Then the answers in (3) is "YES", then Is it correct when the customer buy the "Oracle BPM Suite 11g" , they no need to buy "Oracle SOA 11g" any more when they would like to implements that applications based on SOA in the future (without using BPM) ?
5) What IF , the customer would like to start with "Oracle SOA Suite 11g" product and decide to buy only Oracle SOA Suite 11g first ; then later on in the future they would like to implement BPM projects in the future. Can you upgrade "Oracle SOA Suite 11g" to include "Oracle BPM Sutie 11g" and pay only the price different ?
I hope you can help providing the answers to these questions. THank you very much in advance.
Best Regards
Pearapon S.

This is a question best answered by your Oracle reseller or Oracle account manager to give you all the details but I hope this brief answer helps:
- The Unified Business Process Management Suite (BPM Suite 11g) includes: BPM Studio, BPM Composer, BPMN Service Engine and Workflow Extensions, BPM Process Spaces, and BPM Process Analytics.
- BPM Suite 11g requires the licensing of SOA Suite 11g for Oracle Middleware which requires a license for WebLogic Suite.
- You can license SOA Suite 11g now and license BPM Suite 11g later.
Since the products are layered, I don't see this cutting into SOA sales at all. My personal view is that BPM on top of SOA is brilliant since it provides easy integration between human and automated tasks, builds on many of the SOA concepts that are key for a successful BPM implementation (functional, not the Oracle product), and uses the same IDE. The synergies extend past easy use of services; the same business rules and human workflow components are used between both products.

SOA suite 11g and Windows 7

Hi All,
I have purchased a new HP Pavilion dv7 -4053cl It comes with Windows 7 Home edition.
If I download Oracle SOA suite 11g and Weblogic 10.1.3., will it work on Windows 7 Home ?
Thanks,
p

Hi ,
I installed SOA suite 11.1.1.2 sucessfully in Windows 7. Now am unable to upgrade it to 11.1.1.3 since I installed the wrong version of weblogic (installed weblogic 10.3.3 that pertains to 32-bit windows system instead of weblogic 10.3.3_generic.jar that pertains to 64-bit platforms.)
I understand that I need to uninstall SOA suite along with weblogic and install everything fresh . However I am unable to uninstall SOA suite 11.1.1.2 now (tried running <ORACLE_SOA_HOME>/oui/bin). Encountered following error :-
setup.exe has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Can you please help .
Thanks in advance !

Why you want to be on 11g and not 10g on your Siebel upgrade large database

Hi All,
Just realized the issue of adding new non nullable columns that normally is a huge issue on Siebel upgrades should go away with 11g since the way this is handled is totally changed. Other than tables like s_audit_item which has a CLOB column should allow these columns to be added very fast.
This is good reason to go with 11g instead of 10g if you are upgrading Siebel.
When you add a column, the initial value of each row for the new column is null. If
you specify the DEFAULT clause for a NOT NULL column, then the default value is
stored as metadata but the column itself is not populated with data. However,
subsequent queries that specify the new column are rewritten so that the default value
is returned in the result set.
This optimized behavior differs from earlier releases, when as part of the ALTER
TABLE operation Oracle Database updated each row in the newly created column with
the default value, and then fired any AFTER UPDATE triggers defined on the table.
However, the optimized behavior is subject to the following restrictions:
■ The table cannot have any LOB columns. It cannot be index-organized, temporary,
or part of a cluster. It also cannot be a queue table, an object table, or the container
table of a materialized view.
■ The column being added cannot be encrypted
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Ok well you need to get your facts straight. You say the reason to upgrade to OS 4 but half of these have to do with the new iPhone 4 and not the OS. Two totally different issues

JALOPY and JDev 10g 9.0.5.1

How can I incorporate jalogy in to Jdev 9.0.5.1?
I followed the instructions on jalopy website and it worked perfectly for Jdev 10g Preview but not 9.0.5.1. All I did before was just copy the jar files into <JDEV>\jdev\lib\ext directory and restart JDev. Now it doesn't work. Thank you in advance.

Thank you Rob for your fast response. However, it still doesn't work. However, I noticed that in the <JDEV9051>\jdev\lib\ext folder there is README.txt and it has some XML to define external plugins. I have not noticed it in the older release. Do I have to configure the plugins using XML config file now?
Again thank you in advance.

Jsp 2.0 and jdev 10g production (custom tags)

there are some examples at
http://otn.oracle.com/sample_code/tech/java/jsps/index.html
I have certian questions it would be great if some one would clear these for me..
In JSP 1.2 if we wanted to write the custom tag's we had tag classes that extend TagSupport or TagBodySupport and the doStart() and doEnd() tag with the evaluate body. I could spit out the complete html text on an encounter of a tag! but in the JSP 2.0 a doTag() seems to take care of the intracies! how??
Now with jsp 2.0 I want to do the same... say some thing like this ....
<tg:myTag list="${somelist}"></tg:myTag> and say in my tag handler class I know what to do with this list. May be I will create complete html code and will use jspWriter to write out the html inbetween these tags!!
I have downloaded the eStore example but this class
javax.servlet.jsp.tagext.SimpleTagSupport; is not imported. So I am not able to look at the SimpleTagSupport class.
If I am trying to run the example in jdev 10g production should I have to specify that I am using jsp 2.0 so that jdev knows not to use jsp 1.2? if so how can I do this.
Does all the examples provided use the OC4J standalone? Can I use the embedded oc4J instead?
regards.

After reading a bit more now I know how the tags work.
However from the example I see (eStore) an array called by name "products" is created and set on the jspContext. If I already have the list and want to pass on the list which is in a bean or a session or a request can I provide it this way.
<tag:myTag var=${bean.list}>
or
<tag:myTag var=${session.list}>
or
<tag:myTag var=${request.list}>in the .tld file I should specify the attribute var and whether it should be runtime evaluable.
and in the TagClass
private Collection var;
private String listName;
public void setVar(Colloection aList) {
this.var = aList;
public Collection getVar() {
return var;
public void doTag( ) throws JspException{
// do i always need to this next line ------
getJspContext( ).setAttribute(listName, getVar());
}so that in my .tag file I can use some thing like this
<c:forEach var="list" items="${item}">
<td>${item.subObject.name}</td>
<td>${item.subObject.value}</td>
</c:forEach>And finally... as and when a tag is encountered the .tag file contents corresponding to that tag is called to get the html text and all that text is printed out in the jsp page right (without the jspWriter "out"). How does the browser know when to stop? like doEndTag() function? are these functions implicitly called?
regards.

OBI 11g and OBI 10g pointing to the same database

Hi guys!
I have a questions. On my PROD server I've installed database and OBI 10g. I want to install now OBI 11G on a separate machine and point repository to the same database.
Is it possible? Will it cause any problems?
With regards,
PsmakR

Hi,
Should not be an issue. When you install 11g, it will create few default schemas, provide your prod db details so that obiee related schemas will reside in prod db.
You should not have any issue in migration.
Regards,
Dpka

Param binding with Struts and JDev 10G

This comes from a post in UIX forum. I transcribe the complete text. Can someone help me? Thanks in advance.
Params in queries with Jdev 10g Sep 22, 2003 11:50 PM
Reply
I had a working UIX App and used the null event to setting parameters for my query but using 10g doesn't work. I tried setWhereClause in my application module class, calling it from the data action, but i get an error (index out of bounds). If I try "setWhereClause", it works fine but it's veeeeery slow (I think the query first fechs all rows). I need something that before getting rows, initialize the query (my view object is defined with an empty where clause, because the queries will be defined in runtime via a Emp_ID). Of course, there is and index on emp_id. Help me, please...
Re: Params in queries with Jdev 10g ( In Reply To : Params in queries with Jdev 10g ) Sep 24, 2003 12:37 AM
Reply
Hi, this is my code using BC4J and the null event in the uix page. This worked fin with Jdev 9.0.3.
public static EventResult EstableceParametros(BajaContext bc,
Page page, PageEvent event)
String exp;
DatosUsuario dat = DatosUsuario.getDatosUsuario(bc);
exp=dat.sId_Expediente;
ApplicationModule am=ServletBindingUtils.getApplicationModule(bc);
ViewObject vo=ServletBindingUtils.getViewObject(bc);
vo.setWhereClauseParam(0,exp);
return new EventResult(page);
Now, I have removed the where clause from the viewobject and using dataAction I do this:
protected void initializeRequestParameters(DataActionContext actionContext)
// TODO: Override this oracle.adf.controller.struts.actions.DataAction method
super.initializeRequestParameters(actionContext);
HttpServletRequest req=actionContext.getHttpServletRequest();
String evento=req.getParameter("event");
DatosUsuario dat = DatosUsuario.getDatosUsuario(req);
String exp=dat.sId_Expediente;
BindingContext bc=actionContext.getBindingContext();
DCDataControl dc= bc.getContext(req).getDefaultDataControl();
Object misdatos=dc.getDataProvider();
Elendil am=(Elendil)misdatos;
am.ParamAnotacionExp(exp);
In my application module class:
public void ParamAnotacionExp(String idexpediente)
AnotacionExpViewImpl vo=getAnotacionExpView1();
* if (idexpediente.equals(""))
vo.setWhereClause("centro = centro and id_expediente like " + "'%'");
else
vo.setWhereClause("centro = centro and id_expediente = " + idexpediente);
vo.executeQuery();
//(1) vo.setWhereClauseParam(1,idexpediente);
vo.setWhereClause("id_expediente = " + idexpediente);
vo.executeQuery();
If I use I get a null pointer, so I removed the where clause from the view object.
Than you very much.
Re: Params in queries with Jdev 10g ( In Reply To : Re: Params in queries with Jdev 10g ) Sep 26, 2003 3:52 PM
Reply
Juanma -
I finally found time to put together a test case, but unfortunately I wasn't able to reproduce the problem. Here is what I tried:
- In JDev 9.0.3, I created a simple BC4J data model based on the Scott schema - with a single ViewObject for the Emp table.
- I modified the EmpView query to include the following bind variable in the where clause:
WHERE Emp.SAL < :1
- I used the uiXML Browse & Edit Form wizard to create some simple uiXML/BC4J pages.
- I added the following event handler to View1.uix:
<event name="null">
<bc4j:findRootAppModule name="EmpView1AppModule">
<bc4j:findViewObject name="EmpView1">
<method class="events.TestEvents" method="doNull"/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>
</event>
TestEvents.doNull() looks like this:
public static EventResult doNull(
BajaContext context,
Page page,
PageEvent event)
ViewObject vo = ServletBindingUtils.getViewObject(context);
vo.setWhereClauseParam(0, "5000");
return new EventResult(page);
- When I run View1.uix in the embedded OC4J server, I can see that the EmpView VO is restricted based on the criteria specified in the call to ViewObject.setWhereClauseParam() in my null event handler. Only employees with salaries less than 5000 are displayed.
- Next, I made a copy of my entire workspace and copied it into my jdev10g/jdev/mywork directory.
- I then imported the workspace into 10g, allowing the UIX files to be converted to EL, and also allowing the BC4J model definition to be updated.
- Finally, I try running again in 10g - everything works as expected.
So, the good news is that this stuff should still work in 10g. The bad news is that it is going to take some more work for us to nail down exactly why this isn't working for your application. The best place to start would probably be for us to take a look at the null pointer exception that you are seeing - so please post the stack trace when you can.
Thanks,
Andy
Re: Params in queries with Jdev 10g ( In Reply To : Params in queries with Jdev 10g ) Sep 28, 2003 11:05 PM
Reply
Andy, excuse me for the repost.
If I try the way you explain, it worked fine, but the problem is that I'm also convertint to struts. In the data action, I have overriden this:
protected void initializeRequestParameters(DataActionContext actionContext)
There I try to set the params:
// TODO: Override this oracle.adf.controller.struts.actions.DataAction method
//super.initializeRequestParameters(actionContext);
HttpServletRequest
// If I uncomment the line super..., the result is the same.
req=actionContext.getHttpServletRequest();
String evento=req.getParameter("event");
DatosUsuario dat = DatosUsuario.getDatosUsuario(req);
String exp=dat.sId_Expediente;
BindingContext bc=actionContext.getBindingContext();
DCDataControl dc= bc.getContext(req).getDefaultDataControl();
Object misdatos=dc.getDataProvider();
Elendil am=(Elendil)misdatos;
am.ParamAnotacionExp(exp);
In my viewobject, I have this where clause:
anotacionexp.id_expediente = :1
Then, in my ApplicationModule class:
public void ParamAnotacionExp(String idexpediente)
AnotacionExpViewImpl vo=getAnotacionExpView1();
vo.setWhereClauseParam(1,idexpediente);
//vo.setWhereClauseParam(0,idexpediente); With 0, the result is the same.
vo.executeQuery();
And when I run, I get this:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.ArrayIndexOutOfBoundsException, msg=0
at oracle.jbo.JboException.<init>(JboException.java:343)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.dispatchMethod(Abs tractRemoteApplicationModuleImpl.java:4658)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.executeMethod(Abst ractRemoteApplicationModuleImpl.java:4854)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgReque st(AbstractRemoteApplicationModuleImpl.java:3449)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgEntri es(AbstractRemoteApplicationModuleImpl.java:3630)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readServiceMessage (AbstractRemoteApplicationModuleImpl.java:2975)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(Abs tractRemoteApplicationModuleImpl.java:1639)
at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:59 86)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemot eApplicationModuleImpl.java:1608)
at oracle.jbo.server.remote.colo.ServerApplicationModuleImpl.doMessage(ServerAppli cationModuleImpl.java:245)
at oracle.jbo.common.colo.ColoApplicationModuleImpl.doMessage(ColoApplicationModul eImpl.java:102)
at oracle.jbo.client.remote.ApplicationModuleImpl.doMessage(ApplicationModuleImpl. java:5233)
at oracle.jbo.client.remote.PooledRequestHandler.doMessage(PooledRequestHandler.ja va:70)
at oracle.jbo.client.remote.ApplicationModuleImpl.doMessage(ApplicationModuleImpl. java:5233)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendServiceMessage(ApplicationMo duleImpl.java:998)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendServiceMessage(ApplicationMo duleImpl.java:1012)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendWorkingSetRequests(Applicati onModuleImpl.java:3049)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendRequest(ApplicationModuleImp l.java:1041)
at oracle.jbo.client.remote.ApplicationModuleImpl.riInvokeExportedMethod(Applicati onModuleImpl.java:5255)
at galadriel.client.ElendilClient.ParamAnotacionExp(ElendilClient.java:21)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
at java.lang.reflect.Method.invoke(Method.java)
at oracle.jbo.common.ws.WSProxy.invokeMethod(WSProxy.java:120)
at oracle.jbo.common.ws.WSProxy.invoke(WSProxy.java:90)
at $Proxy3.ParamAnotacionExp(Unknown Source)
at controller.AnotacionesDataAction.initializeRequestParameters(AnotacionesDataAct ion.java:63)
at oracle.adf.controller.struts.actions.DataAction.executeImpl(DataAction.java:104 )
at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:69)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor .java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java: 65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:356)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java: 16)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:148)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java: 20)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:148)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatch er.java:610)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletReques tDispatcher.java:317)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.j ava:784)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResou rcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:536)
## Detail 0 ##
java.lang.ArrayIndexOutOfBoundsException: 0
at oracle.jdbc.dbaccess.DBDataSetImpl._getDBItem(DBDataSetImpl.java:323)
at oracle.jdbc.dbaccess.DBDataSetImpl._createOrGetDBItem(DBDataSetImpl.java:566)
at oracle.jdbc.dbaccess.DBDataSetImpl.setNullBindItem(DBDataSetImpl.java:1878)
at oracle.jdbc.driver.OraclePreparedStatement.setNull(OraclePreparedStatement.java :1190)
at oracle.jbo.server.ViewRowSetImpl.bindParameters(ViewRowSetImpl.java:1436)
at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:576)
at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java: 2946)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:553)
at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:612 )
at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:594)
at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:2890)
at galadriel.ElendilImpl.ParamAnotacionExp(ElendilImpl.java:111)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
at java.lang.reflect.Method.invoke(Method.java)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.dispatchMethod(Abs tractRemoteApplicationModuleImpl.java:4636)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.executeMethod(Abst ractRemoteApplicationModuleImpl.java:4854)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgReque st(AbstractRemoteApplicationModuleImpl.java:3449)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processSvcMsgEntri es(AbstractRemoteApplicationModuleImpl.java:3630)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readServiceMessage (AbstractRemoteApplicationModuleImpl.java:2975)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(Abs tractRemoteApplicationModuleImpl.java:1639)
at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:59 86)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemot eApplicationModuleImpl.java:1608)
at oracle.jbo.server.remote.colo.ServerApplicationModuleImpl.doMessage(ServerAppli cationModuleImpl.java:245)
at oracle.jbo.common.colo.ColoApplicationModuleImpl.doMessage(ColoApplicationModul eImpl.java:102)
at oracle.jbo.client.remote.ApplicationModuleImpl.doMessage(ApplicationModuleImpl. java:5233)
at oracle.jbo.client.remote.PooledRequestHandler.doMessage(PooledRequestHandler.ja va:70)
at oracle.jbo.client.remote.ApplicationModuleImpl.doMessage(ApplicationModuleImpl. java:5233)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendServiceMessage(ApplicationMo duleImpl.java:998)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendServiceMessage(ApplicationMo duleImpl.java:1012)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendWorkingSetRequests(Applicati onModuleImpl.java:3049)
at oracle.jbo.client.remote.ApplicationModuleImpl.sendRequest(ApplicationModuleImp l.java:1041)
at oracle.jbo.client.remote.ApplicationModuleImpl.riInvokeExportedMethod(Applicati onModuleImpl.java:5255)
at galadriel.client.ElendilClient.ParamAnotacionExp(ElendilClient.java:21)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
at java.lang.reflect.Method.invoke(Method.java)
at oracle.jbo.common.ws.WSProxy.invokeMethod(WSProxy.java:120)
at oracle.jbo.common.ws.WSProxy.invoke(WSProxy.java:90)
at $Proxy3.ParamAnotacionExp(Unknown Source)
at controller.AnotacionesDataAction.initializeRequestParameters(AnotacionesDataAct ion.java:63)
at oracle.adf.controller.struts.actions.DataAction.executeImpl(DataAction.java:104 )
at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:69)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor .java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:509)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java: 65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:356)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java: 16)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:148)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java: 20)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:148)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatch er.java:610)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletReques tDispatcher.java:317)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.j ava:784)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResou rcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:536)
I'm sure I'm doing somthing wrong, but don't know what. Thank you for your help.
Re: Params in queries with Jdev 10g ( In Reply To : Re: Params in queries with Jdev 10g ) Sep 29, 2003 5:24 PM
Reply
Juanma -
Not sure what would cause this JboException... Could you try posting to the JDev forum - I'm guessing the BC4J folks might be more familiar with this error...
Andy

Check out:
Setting the view's where clause at runtime

SOA Suite 11g and its compatibility with Weblogic

Hi ,
I have two questions:
1. From where do I download the SOA Suite 11g --Link to the download?
2.If SOA suite 11g can be installed on weblogic. I understand that SOA suite 10.1.3.4 is compatible with weblogic 9.2 but need some inputs on the SOA Suite11g!
Cheers
Prabal

Prabal,
Did you get an answer or we have to wait for the official release till July-1-2009.
Thanks,
Rahul

USER_DEPENDENCIES view in oracle 11g and oracle 10g are different?

I have tested oracle 10g and oracle 11g. And I found some different behavior in the user_dependencies view between two oracle version.
In the oracle 10g, whatever referenced object is populated in the user_dependencies view. In the oracle 11g, however, only valid referenced objects are populated in it.
For example, a package, pac_1, references table, ref_tab_1, and package, ref_pac_2. After ref_tab_1 is dropped and ref_pac_2 is invalid, I query to user_dependencies.
sql> select referenced_name, referenced_type from user_dependencies where name = 'pac_1'.
In oracle 10g, the result is like the following,
< referenced_type > , < referenced_name >
non-existent , ref_tab_1
package , ref_pac_2
In oracle 11g, the result is not showing non-existed object nor invlid object like the following,
no rows selected
Is that the TRUE or do I missed some when I installed database or created database in 11g?
Is there a way to make the behavior of user_dependencies like it in 10g which shows all the referenced objets?
Edited by: user7436913 on Mar 10, 2010 5:48 AM
Edited by: user7436913 on Mar 10, 2010 5:51 AM
Edited by: user7436913 on Mar 10, 2010 5:52 AM
Edited by: user7436913 on Mar 10, 2010 5:53 AM

can you post your query with explain plan for both 9i version and 10g version.
Thanks,
karthick.

Jdev 9i and Jdev 10g

Hello All,
I recently downloaded Jdev10.3.3.0 (RUP4) and already had Jdev 9i. I created a new JDEV_USER_HOME for R12 as JDEVR12_USER_HOME and gave the path as follows :- C:\Jdev10g\jdevhome\jdev
For Jdev9i, i have the following path -->JDEV_USER_HOME -- C:\Jdev\jdevhome\jdev
I am not able to test the tutorials in Jdev10g because of the env. variables. WHat should be my approach.
Please let me know

Hi,
there is no use in keeping the environment variable JDEVR12_USER_HOME.
Set your 10g path at the env variable JDEV_USER_HOME .
So every time you switch between different jdevs you need to change the env variable first.
--Prasanna

DIS 11g and UCM 10g

Hey all,
Wondering if anyone else has faced this. We know DIS 11g can drive profile checkins when used with UCM 11g, but it doesn't seem to work with UCM 10g.
Has anyone figured a way around this? The checkbox from the DIS interface doesn't seem to do anything when using UCM 10g.
We've sent a request to Oracle. Hoping to hear some good news (enhancement request FTW!!!)
Thanks alot

In the config manger's profile tab, there is the ability to select which metadata value drives your profile selection. My suggestion is to try and see if it works when switching that value to the 11g default (i.e., xIdcProfile). Of course, only attempt this if you have a dev vm or other dev environment.
The 11g user guide points to some windows registry keys that drive profile behavior, but I'm not sure if that would help.
Have you found the release notes for DIS? Since it was stated that some of the new DIS features are not capable with 10g, I'd assume/expect/hope that those details are listed somewhere.
Thanks,
-ryan
Ryan Sullivan | ECMconsultant
http://www.ecmconsultant.net/

DMS (Document Managment System) with Oracle BPA Suite 11g

Hello there.
I have a empty list of availables DMS in Oracle BPA Architect.
The message that appears on help is: Contact IDS Scheer to add more DMS servers.
I have a Alfresco DMS and Entropysoft connector installed, but still nothing.
Someone knows waht the issue may be ?
Thank you

Hi,
did you check the Alfresco Connector Guide on the DVD (<DVD>\Addons\DMSIntegration\Documents\Technologies\EntropySoft\Connectors\alfresco)?
Best regards, Danilo

[SOLVED] SOA Suite 11g and OID

How should I configure OC4J in TP4 such that Human Tasks can be assigned to users in an LDAP directory, e.g Oracle Internet Directory?
Thanks,
Eyðun
Message was edited by:
Eyðun E. Jacobsen
Message was edited by:
Eyðun E. Jacobsen

The resulting jps-config.xml will be as follows:
<?xml version="1.0" encoding="UTF-8" standalone='yes'?>
<jpsConfig xmlns="http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd" schema-major-version="11" schema-minor-version="1">



<property name="oracle.security.jps.jaas.mode" value="off"/>

<property name="oracle.security.jps.farm.name" value="cn=OracleFarmContainer"/>
<property name="oracle.security.jps.ldap.root.name" value="cn=OracleJpsContainer"/>
<property name="oracle.security.jps.ldap.max.retry" value="5"/>
<propertySets>

<propertySet name="saml.trusted.issuers.1">
<property name="name" value="www.oracle.com"/>
</propertySet>

<propertySet name="access.sdk.properties">
<property name="access.sdk.install.path" value="$ACCESS_SDK_HOME"/>
</propertySet>
</propertySets>
<serviceProviders>
<serviceProvider type="CREDENTIAL_STORE" name="credstoressp" class="oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider">
<description>SecretStore-based CSF provider</description>
</serviceProvider>
<serviceProvider type="IDENTITY_STORE" name="idstore.xml.provider" class="oracle.security.jps.internal.idstore.xml.XmlIdentityStoreProvider">
<description>XML-based IdStore Provider</description>
</serviceProvider>
     <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider">
<description>XML-based IdStore Provider</description>
</serviceProvider>
<serviceProvider type="POLICY_STORE" name="policystore.xml.provider" class="oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider">
<description>XML-based PolicyStore Provider</description>
</serviceProvider>
<serviceProvider type="ANONYMOUS" name="anonymous.provider" class="oracle.security.jps.internal.anonymous.idm.IdmAnonymousServiceProvider">
<description>Anonymous Service Provider</description>
</serviceProvider>
<serviceProvider type="LOGIN" name="jaas.login.provider" class="oracle.security.jps.internal.login.jaas.JaasLoginServiceProvider">
<description>This is Jaas Login Service Provider and is used to configure login module service instances</description>
</serviceProvider>
<serviceProvider type="POLICY_STORE" name="policy.xds" class="oracle.security.jps.internal.policystore.xds.XsPolicyServiceProvider">
<description>JAAS+ policy service provider</description>
</serviceProvider>
<serviceProvider type="XDS_AUTHENTICATION_PROVIDER" name="authentication.xds" class="oracle.security.jps.internal.idstore.xds.XsAuthenticationProvider">
<description>JAAS+ authentication service provider</description>
</serviceProvider>
<serviceProvider type="XDS_SESSION_PROVIDER" name="sessioncookie.xds" class="oracle.security.jps.internal.policystore.xds.session.SessionCookieProvider">
<description>JAAS+ Session Cookie service provider</description>
</serviceProvider>

<serviceProvider type="IDM" name="idm.provider" class="oracle.security.jps.internal.idm.IdmServiceProvider">
<description>3rd Party Custom Idm Provider</description>
</serviceProvider>
<serviceProvider name="keystore.provider" type="KEY_STORE" class="oracle.security.jps.internal.keystore.KeyStoreProvider">
<description>PKI Based Keystore Provider</description>
<property name="provider.property.name" value="owsm"/>
</serviceProvider>
</serviceProviders>
<serviceInstances>
<serviceInstance name="credstore" provider="credstoressp" location="./oc4j-credstore">
<description>File Based Credential Store Service Instance</description>
</serviceInstance>
<serviceInstance name="idstore.xml" provider="idstore.xml.provider" location="./system-jazn-data.xml">
<description>File Based Identity Store Service Instance</description>
<property name="subscriber.name" value="jazn.com"/>
</serviceInstance>
<serviceInstance name="policystore.xml" provider="policystore.xml.provider" location="./system-jazn-data.xml">
<description>File Based Policy Store Service Instance</description>
</serviceInstance>
<serviceInstance name="anonymous" provider="anonymous.provider">
<description>Anonymous Service Instance</description>

<property name="anonymous.user.name" value="anonymous"/>

<property name="anonymous.role.name" value="anonymous-role"/>
</serviceInstance>
<serviceInstance name="idm" provider="idm.provider">
<description>JSSO Authentication Configuration</description>
<property name="idm.authentication.name" value="JavaSSO"/>
<property name="idm.token.asserter.class" value="oracle.security.jps.internal.jsso.SSOCookieTokenAsserter"/>
<property name="idm.token.collector.class" value="oracle.security.jps.internal.jsso.SSOCookieTokenCollector"/>
<property name="idm.token.type" value="COOKIE_TOKEN"/>
<property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO"/>
<property name="custom.sso.url.login" value="/jsso/SSOLogin"/>
<property name="custom.sso.url.logout" value="/jsso/SSOLogout"/>
<property name="custom.sso.cred.key" value="JSSO_KEY"/>
<property name="custom.sso.cred.alias" value="JSSO_ALIAS"/>
</serviceInstance>
<serviceInstance name="idm.osso" provider="idm.provider">
<description>Oracle SSO Authentication Configuration</description>
<property name="idm.authentication.name" value="OSSO"/>
<property name="idm.token.asserter.class" value="oracle.security.jps.internal.osso.OSSOTokenAsserter"/>
<property name="idm.token.collector.class" value="oracle.security.jps.internal.osso.OSSOTokenCollector"/>
<property name="idm.token.type" value="HEADER_TOKEN"/>
</serviceInstance>
<serviceInstance name="idstore.loginmodule" provider="jaas.login.provider">
<description>Identity Store Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.idstore.IdStoreLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
</serviceInstance>
<serviceInstance name="anonymous.loginmodule" provider="jaas.login.provider">
<description>Anonymous Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.anonymous.AnonymousLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
</serviceInstance>
<serviceInstance name="xds.loginmodule" provider="jaas.login.provider">
<description>JAAS+ LWS LoginModule</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.xds.XsLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUISITE"/>
</serviceInstance>

<serviceInstance name="keystore" provider="keystore.provider" location="./default-keystore.jks">
<description>Default JPS Keystore Service</description>
<property name="keystore.type" value="JKS"/>
     <property name="keystore.csf.map" value="oracle.wsm.security"/>
<property name="keystore.pass.csf.key" value="keystore-csf-key"/>
<property name="keystore.sig.csf.key" value="enc-csf-key"/>
<property name="keystore.enc.csf.key" value="enc-csf-key"/>
</serviceInstance>

<serviceInstance name="saml.loginmodule" provider="jaas.login.provider">
<description>SAML Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.saml.JpsSAMLLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
<propertySetRef ref="saml.trusted.issuers.1"/>
</serviceInstance>

<serviceInstance name="krb5.loginmodule" provider="jaas.login.provider">
<description>Kerberos Login Module</description>
<property name="loginModuleClassName" value="com.sun.security.auth.module.Krb5LoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
<property name="storeKey" value="true"/>
<property name="useKeyTab" value="true"/>
<property name="doNotPrompt" value="true"/>
<property name="keyTab" value="./krb5.keytab"/>
<property name="principal" value="HOST/[email protected]"/>
</serviceInstance>

<serviceInstance name="oam.loginmodule" provider="jaas.login.provider">
<description>Oracle Access Manager Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.oam.OAMLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
<propertySetRef ref="access.sdk.properties"/>
</serviceInstance>

<serviceInstance name="admin.tool.loginmodule" provider="jaas.login.provider">
<description>Realm Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jazn.login.module.RealmLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
</serviceInstance>

<serviceInstance name="digest.authenticator.loginmodule" provider="jaas.login.provider">
<description>Digest Authenticator Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.digest.DigestLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
</serviceInstance>

<serviceInstance name="certificate.authenticator.loginmodule" provider="jaas.login.provider">
<description>X509 Certificate Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.x509.X509LoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
</serviceInstance>

<serviceInstance name="wss.digest.loginmodule" provider="jaas.login.provider">
<description>WSS Digest Login Module</description>
<property name="loginModuleClassName" value="oracle.security.jps.internal.jaas.module.digest.WSSDigestLoginModule"/>
<property name="jaas.login.controlFlag" value="REQUIRED"/>
</serviceInstance>
     <serviceInstance name="idstore.oid" provider="idstore.ldap.provider">
<property name="subscriber.name" value="dc=us,dc=oracle,dc=com"/>
<property name="idstore.type" value="OID"/>
<property name="security.principal.alias" value="JPS"/>
<property name="security.principal.key" value="oid.credentials"/>
<property name="ldap.url" value="ldap://stapm51.us.oracle.com:389"/>
<extendedProperty>
<name>user.search.bases</name>
<values>
<value>dc=us,dc=oracle,dc=com</value>
</values>
</extendedProperty>
<extendedProperty>
<name>group.search.bases</name>
<values>
<value>dc=us,dc=oracle,dc=com</value>
</values>
</extendedProperty>
<property name="username.attr" value="cn"/>
<propperty name="group.attr" value="cn"/>
     <property name="PROPERTY_ATTRIBUTE_MAPPING" value="im=mail"/>
     </serviceInstance>
</serviceInstances>
<jpsContexts default="default">

<jpsContext name="default">
<serviceInstanceRef ref="credstore"/>
<serviceInstanceRef ref="keystore"/>
<serviceInstanceRef ref="idstore.xml"/>
<serviceInstanceRef ref="policystore.xml"/>
<serviceInstanceRef ref="idstore.loginmodule"/>
<serviceInstanceRef ref="idm"/>
</jpsContext>
     <jpsContext name="oid">
<serviceInstanceRef ref="credstore"/>
<serviceInstanceRef ref="keystore"/>
<serviceInstanceRef ref="idstore.oid"/>
<serviceInstanceRef ref="policystore.xml"/>
<serviceInstanceRef ref="idstore.loginmodule"/>
<serviceInstanceRef ref="idm"/>
</jpsContext>

<jpsContext name="oracle.wsm.security.default">
<serviceInstanceRef ref="credstore"/>
<serviceInstanceRef ref="idstore.xml"/>
<serviceInstanceRef ref="keystore"/>
<serviceInstanceRef ref="anonymous.loginmodule"/>
<serviceInstanceRef ref="idstore.loginmodule"/>
<serviceInstanceRef ref="certificate.authenticator.loginmodule"/>
<serviceInstanceRef ref="saml.loginmodule"/>
<serviceInstanceRef ref="krb5.loginmodule"/>
<serviceInstanceRef ref="oam.loginmodule"/>
<serviceInstanceRef ref="wss.digest.loginmodule"/>
</jpsContext>

<jpsContext name="anonymous">
<serviceInstanceRef ref="anonymous"/>
<serviceInstanceRef ref="anonymous.loginmodule"/>
</jpsContext>

<jpsContext name="oracle.security.jps.fmw.authenticator.IdmAuthenticator">
<serviceInstanceRef ref="idstore.loginmodule"/>
</jpsContext>

<jpsContext name="oracle.security.jazn.tools.Admintool">
<serviceInstanceRef ref="idstore.loginmodule"/>
</jpsContext>

<jpsContext name="oracle.security.jps.fmw.authenticator.DigestAuthenticator">
<serviceInstanceRef ref="digest.authenticator.loginmodule"/>
</jpsContext>

<jpsContext name="oracle.security.jps.fmw.authenticator.BasicAuthenticator">
<serviceInstanceRef ref="idstore.loginmodule"/>
</jpsContext>

<jpsContext name="X509CertificateAuthentication">
<serviceInstanceRef ref="certificate.authenticator.loginmodule"/>
</jpsContext>

<jpsContext name="SAML">
<serviceInstanceRef ref="saml.loginmodule"/>
</jpsContext>
</jpsContexts>
</jpsConfig>

BPA suite 11g and Jdev 10g

Similar Messages

Maybe you are looking for