BPC 10.0 and 10.1 NW performance Note

Hello Friends,
Can any one please provide the SAP Notes which are release regarding the BPC performance issue.
Regards,
Mahendra Dev.

I think I got a very good links for above post.. Please go through the below link to find the SAP Notes which help to improve the BPC performance.
http://www.linkedin.com/groups/BPC-Performance-Related-useful-notes-3919710.S.216254318
Regards,
Rajesh.K

Similar Messages

BPC 10.0 MS Version - Error when performing consolidation - Error FX-300 nothing extract from Fact - CLCFXTrans

Dear All,
In BPC 10.0 Microsoft Version, I am performing consolidation. Running consolidation pckg was successful initially. Suddenly, it fails - giving the following error message:
Error FX-300 nothing extract from Fact - CLCFXTrans
I believe the above error happens during currency conversion which happens to the final consolidation process.
Pls. help to fix this error message.
Thank you.
Regards,
Peri

Hi Peri,
If you have access to back end data base then please check one table that is clcFXTrans_Consolidation (clcFXTrans_model name)
All currency conversion rule are stored in the table. Actually there are two tables you can check for currency conversion rule.
1) clcFXtrans_Consolidation(clcFXtrans_model name)--> store currency conversion rule
2) clcFXtransh_Consolidation(clcFXtransh_model name) store rate type
write a query on that table and check,if nothing is their then validate all rule again.
Sushant

LDEP and LALL expansion functions do not perform as expected

Hi all
I really need some help on this issue:
System: SAP BPC NW 7.5 SP7
Problem: The EVDRE LDEP and LALL expansion functions do not perform as expected when combined with PARENTAFTER.
Example: Assume that PARENT_A is HLEVEL 1
u2022     When using LDEP(5,PARENT_A),PARENTAFTER
u2022     HLEVEL 2 and 3 are displayed correctly with the members display first followed by the parent
u2022     However, all levels thereafter i.e. HLEVEL 4 + are displayed after their parent members
Note:
u2022     It is not restricted to HLEVEL greater than 3
u2022     Problem level = N +2 where N is the HLEVEL of specified parent member within the LDEP or LALL formula

My experience is that LDEP and LALL are buggy in BPC 7.5 NW. If you reference the documentation only MEMBERS, BASMEMBERS, BAS, DEP, ALL, SELF, NOEXPAND, GDEP, GBAS, and GALL are supported memberset parameters/functions. My advice if you choose to mix the MS and NW worlds of BPC is to test VERY THOROUGHLY before productionizing any EVDRE since the MS functions are not officially supported by SAP in NW.

Difference between BPC for MS and BPC for NW

Hi All,
I'm looking for some comparative analysis between BPC for MS and BPC for NW. Can you please give me your points or direct me to some link/material where I can find such stuff.
Primarily I'm focusing on following two points:
- How would the integration to SAP BI work (=differences between SAP BPC (NW) and SAP BPC (MS))?
Could the same degree of automation be established?
- I was told that SAP BPC (MS) could be much faster implemented than the NW version. Is this really the case? Why?
I would really appreciate your earliest response.
Regards,
Shabbar

Hi,
BPC for MS runs on Microsoft platform where as BPC for NW runs on SAP Netweaver.
BPC for NW is tightly integrated with SAP BI all the dimensions and applications created in BPC NW can be seen in BI system in the form of Infoobject (dimensions) and Infocubes (applications).
Performance depends on the complexity and scalability of the project. BPC for NW may undergo lots of improvements and developments in future versions.
search SDN u will get help.
Hope this helps
Regards

TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

My computer is going to be serviced and a system reboot performed. How do I access my Itune information stored in the cloud?

My computer is going to be serviced and a system reboot performed.How do I access my Itune cloud when the repair is completed? Will they all appear when Itunes is redownloaded?

You really should back up your hard drive entirely, or at least critical files such as the iTunes folder. iCloud and Match are not really excuses for a backup and do not back things up identically as on your computer. For one, the iTunes library file which has you playlists and which is the critical file in presenting all your media to you is likely not backed up. If you restore from downloads you'll just end up with an unorganized collection of media file and not what you remember from using itunes now.

Differeance between SAP BPC 5.1 and SAP BPC 7.0 NW Version

Dear experts,
Please contribute your expertise and valuable answers to this question.
what is the script language we need to use in SAP BPC 7.0 NW version? SQL or ABAP..?
What are the new features and positions are added in SAP BPC 7.0 NW comparing to BPC 5.1 and BPC 7.0 MS version.
Thanks a lot in Advance.
Satish

Hi Kumar
I have tried to answer three of your questions. Hope this will help
Ques. Do we have BPF (Business Process Flow) in BPC 7.0 NW version?
Reply: No
You can refer to the thread: BPC 7.0 - how to design business process flow type Planning process?
Ques. If no, How can we do Approval process in 7.0 NW version ?
Reply: Approval process works with changes in the work status settings while data planning moves over the controlling Approval hierarchy. So in the schedule you can have a display of the current work status using EVLCK()
Ques: Can we do Approval Process with Custom menus ?
Reply: You can refer to the thread: BPC 7.0 - how to design business process flow type Planning process?
"There is also a lot of explanation on using EVMNU on the SAP Service Marketplace in the Documentation Addendum to BPC 7.0 SP02 NW Central Note 1306898."
Have a nice day.
Cheers!
Abhishek

RedHat AS4 and Oracle 10R2 upgrade - performance issue

Hi all,
As part of our database upgrade project (from Oracle 10.2.0.1 to 10.2.0.3), we decided to upgrade our OS as well (RedHat AS4 from Update 2 to Update 4, 64-bit). We are in testing phase now and having some serious performance issues.
These below are steps that we have performed:
1. Ran db load testing plus Application Regression testing in order to get a baseline
2. Upgraded RH AS4 from Update 2 to Update 4
3. Ran db load testing plus Application Regression testing
4. Database load testing (including massive parallel processes, like 'insert into ...', 'create indexes ...parallel',etc ...) showed significant slowdown compared to our 'baseline' test (Update 2): 70-80%. The database is still Oracle 10.2.0.1, only RH was updated at this point
5. We upgraded Oracle 10.2.0.1 to 10.2.0.3, latest CPU , etc ...(Update 4 on OS side) still same slowdown in performances ...
6. Our Application Regression Testing has showed performance degradation also but not in same extent as db load test (10-20 % on different application modules)
7. We also did one more thing : went back and upgraded Oracle with Update 2 (some 'workarounds' were required but that's another story). Performances were OK. So it seems our problem is not (directly) related to Oracle version.
Now we are going to install Update 6 (the latest update for AS4) and see how it goes.
If anybody have any experience or idea about this case and want to share it with us, it would be highly appreciated.
Thanks in advance,
Milan N.

Just a quick update for those who follow this thread ...
Everything worked fine with 'Update 6' kernel (both Oracle 10.2.0.1 and 10.2.0.3). We have also applied all available security packages.
Milan N.

Start and stop error for performance counter in Perfmon of Windows server 2008

Dear All,
There is a centralized monitoring server to monitor a few Windows server 2003.
There is a error when I start the performance counter for remote servers.
But it can be started again after 10 seconds.
Error:
When attempting to start the Data Collector Set the following system error occured:
The process cannot access the file because it is being used by another process.
Another issue is I cannot start or stop the performance counter in command line (logman.exe) after 1 month.
The error message is similar to the above, it mentioned something is using the files.
I have to reboot my server.
I don't know how can I find out the root cause.
Please help.
Regards,
Tommy Chan

Dear Tommy,
This issue may be caused by certain programs running in the background.
If it is convenience for you to restart the server, you can do that and test the result.
If the issue persists, you can try a Clean Boot.
Clean boot
=================
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in the Clean Boot environment, if the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
If the issue still occurs, we may need to collect some trace information of the error message by using Process Monitor.
1. Download process monitor from the link given here:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
2. Run the process monitor on the problematic server:
3. Start Process Monitor. You will see File/Registry activity is being captured.
4. Press Ctrl+E to stop logging data.
5. Press Ctrl+X to clear the currently captured data.
6. Under Process Monitor, press Ctrl+E to start gathering data.
7. Now try to reproduce the issue: Start or stop the performance counter in command line to let the error message appear again.
8. Under Process Monitor, Press Ctrl+E to stop capturing.
9. Please save the captured data from Process Monitor to a file (File->Save) and upload this file to the following site:
https://sftus.one.microsoft.com/choosetransfer.aspx?key=626b99a0-c31f-4cd9-9fec-5e0597adef20
Password: i#qil_O$Q[
Please also collect the Process Explorer log on the problematic client:
1. Run the process monitor on the problematic client:
2. Start Process Monitor. You will see File/Registry activity is being captured.
3. Press Ctrl+E to stop logging data.
4. Press Ctrl+X to clear the currently captured data.
5. Under Process Monitor, press Ctrl+E to start gathering data.
6. Now try to reproduce the issue: Start or stop the performance counter in command line on the server to let the error message appear again.
7. Under Process Monitor, Press Ctrl+E to stop capturing.
8. Please save the captured data from Process Monitor to a file (File->Save) and upload it to the above site as well.
Tim Quan - MSFT

Any way to exclude BPC security settings and profiles from backup/restore?

We are on BPC 10 MS and restoring the PROD version to a DEV environment, but do not want to restore the security profiles. Need to figure this out before new BPC development is sent back to PROD with same b/u restore process. DEV security is different than PROD and we do not want the security profiles/settings in DEV to overlay PROD...

Hi Mike,
No automate process to maintain different set of users in both environments while restoring . Manually manage after refreshed based on required user profiles.
Thanks,
Vivek.

BPC 5.1 and Reporting Services on Shared, Corporate Server

We are implementing BPC 5.1 and want to integrate with Reporting Services on a shared, corporate server rather than installing on BPC app/web server. The reason is to minimize number of Reporting Services installations corporate wide. This has led to a number of challenges and questions, which I hope someone can assist with.
1. What level of access is needed by the three BPC service accounts to Reporting Services, during install and ongoing?
2. Can BPC be configured to point to a specific Reporting Services sub-directory, rather than having to browse the whole Reporting Services root?
3. Is there any documentation on BPC and Reporting Services?
Thank you. Nancy

You know there are 3 types of users who assigned to SysAdmin, Admin and user. Your SysAdmin user must have administrator rights of your corporate reporting server. Or that user must be user of "Content Manager" role in reporting service. Otherwise, you will get many errors by end of certain function of Admin console such as process security or process application.
And BPC is designed to use a reporting service exclusively. It is not designed to use a particular folder other than root.
I do not have idea about documents regarding reporting service of BPC.

EVGET in BPC 7 MS and SQL 2008

Have there been any change in how evget works in BPC 7 MS with SQL 2008 compared with BPC 5,1 and SQL 2005?
When I use EVGET in BPC 5.1 and SQL 2005 I always get RFN# when the cell with EVGET isn't updated.
But now when I'm trying BPC 7 and SQL 2008 I get i zero (0) when cell isn't updated. And some times I get another value that isn't the right value for that specific EVGET formula, seems like the system has an old value in memory thats shows, but when I update the, right value shows up in the cell.
This can be a bit confusing and even worse, in some of our reports the wrong value isn't updated when report is refreshed.
Anyone with the same problem or anyone who know if there are any changes made how the data is refreshed in EVGET formulas

Did anoyone resolve this issue? - we are facing the same

BPC 5.1 and BPC 7 NW

Hi:
Has anyone installed both BPC 5.1 and 7.0 NW on the same machine?
We need to demo 5.1 and 7 NW to different clients and are wondering if we can use same machine to install both versions.
I do not see any specific technical requirement conflicts in the installation document.
Has anyone tried this with success? Any issue to look out for?
Thanks,
Subramania

Hi Subramania,
I assume you're talking about the client only, not the server. I had a BPC 7 NW client installed on my machine back in October (an early release) and it didn't allow an install without first uninstalling the BPC 5.1 MS client. Likewise, to go back to 5.1 MS I had to uninstall the 7.0 NW.
This may have been improved in the most recent builds of 7.0, but I would be very surprised if they can sit side-by-side.
I'd recommend using a virtual machine setup for one or the other, even if it's just a VM running XP with the BPC client software (i.e., not the BPC server).

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIE

This link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman

BPC 10.0 and 10.1 NW performance Note

Similar Messages

Maybe you are looking for