BPC 10.0 NW - Journal data when clearing the data

Hej Gurus,
I have a quite simple question:
When a journal i created and posted in the system, the journal is stored in a specific table for the model, and the data is stored in the cube. What is going to happen with the journals, if we clear the cube for all data, both journal and non-journal data. Will the journals still be posted in the journal table?
The reason is, we have some scattered bad data that we would like to have cleared, and we want to know, if we can delete all data and import everything again without the journal postings are gone.
Best regards,
Mikkel Kristensen

Hi Mikkel
Journal stored in Journal Table along with BP Cube. Any point of time you want to delete due to Bad data. First you have to Unpost Journals that means No Effect in Journals or No Financials update. Then you can clear BPC Cube data.
When you are ready for Journals just simply Post from Unpost Journals. This process will ensure your data integrity.
Otherwise you will have to face again bad data issue.
In Short :
When you decide to Delete Data from Cube:
1. Unpost Journals from Post
2. Delete Data from BPC Cube( from Backend)
3, Re-load Transactional Data
4. Post Journals from Unpost
Hope this will help you
Thanks
Venkat

Similar Messages

How to link two modules of data when querying the data ?

Hi ,
I am using Designer editor to create a form .
I am having two modules with the tables EMPLOYEE and department .
In my form ,I want to display the data of each employee with the department data .
How to link the two tables data in the designer ?
How to View the generated triggers in the designer ?
Thanks
Sai

Two modules means two forms. These are unrelated.
Or do you mean that you have one form with two blocks (master-detail)?
How to link the two tables data in the designer ?You have to define the foreign key on the tables. Based on this FK Forms Generator will generate the code if you create two Module Components (master-detail) in the module. Don't forget to define the Key Based Link on the master block.
How to View the generated triggers in the designer ?You can't. You have tom open the generated FMB file in Forms Builder to see what code is generated.

Clearing the data buffer from the input fields

Hi,
I am using an user exit CONFPP02 for the Tcode: co11n. I have written a program such that the confirmation numbers having the status CNF will not be allowed to be processed. The whole confirmation is terminated when the system checks the confirmation number and its status as CNF. If the status of the confirmation number is PCNF, the program allows the further processing of the Tcode Co11n.
The problem starts when the user enters the PCNF status confirmation number and enters, the system stores the values in the various input fields. Now without exiting the initial confirmation screen, if the user replaces the Confirmation number of the PCNF status to the Confirmation number of the CNF status , the system issues a warning message:" Confirmation no. or order/sequence/operation has been changed
However, the input fields still contain default values from thepreceding confirmation". if the user says yes, the program written is bypassed , thus allowing the reconfirmation of the CNF confirmation number into PCNF confirmation number .
Can anybody suggest a suitable method to clear the data stored defultly in the input fields so that the program can be made to work.
With regards,
Avinash.S
Mobile no:09996192456

Hi Gilad,
I never use Preview and did not use Preview at all before sending the document over to my most recent client either.
I only opened Preview up this morning after I discovered that all of the form data had disappeared on his end! And the only reason I opened up Preview was because I already knew it looked fine in Acrobat so wanted so wanted to view the form in a different application.
My client would not even have notified me about it had he not sent the signed form back to me and I saw there was no data there! I then called him and asked him about the missing data and he said that he thought I had simply sent over the form purposely with blank fields:(
I have just emailed him to ask him what application he opened it up in. My understanding is that he is on Windows because ne mentioned to me his company was using Windows when we last spoke. Perhaps he has a personal Macbook where he opened it? I just don't know and can hopefully soon find out:)
But THANK YOU for letting me know about that script! I appreciate it:) I have now downloaded and installed it and will just have to use it on ALL of my forms before sending them out:)

Phone won't see media files after clearing the data for SomcPhotoAnalyzer.apk

Hello,My sister accidentally cleared the data for the PhotoAnalyzerService app (com.sonymobile.photoanalyzer 5.5.A.0.10) in the app manager on her Z2. That caused the Album app to disappear from the app drawr. Since then, she updated Album (com.sonyericsson.album) from the Play Store, and that caused the Album icon to reappear in the app drawr. However, something is wrong with how media is handled by the phone now: Album now behaves like this:In Home: all photos inside the DCIM folder, BUT photos that were downloaded to the phone are missin.In Camera: only camera photos taken after the data was cleared.In Folders: shows nothing.When trying to edit an older camera photo it says "no application available."Additionally, all ringtones were rest to default, and selecting new ones is now impossible, either with Sound Picker or with ES File Explorer. Restarting the phone many times didn't help. The phone is running android 4.4.2 (Build 17.1.2.A.0.314). Any advice? Will a factory reset help? Anything other than a factory reset? (she won't be happy to lose everything on the phone...) Edit: to be clear, the files that are missing from Album are still on the phone, and can be viewed with ES File Explorer, for example.

You could try an app preferences reset Settings tap the 3 dots or options icon then Reset app preferences and then reboot and test - As for apps missing then try Settings then Apps then swipe to disabled to see if the app in question is there however if files are missing it could be that all data for that app was erased at the same time

Log "date completed" to the date when "completed" was updated to "yes

Hello,
I want a workflow to fill "date completed" with the date when "completed" is updated to "yes". I am using Sharepoint Designer 2013.
I have been through hours of research but I could not find any post clear enough to me. Please do not refer me to ancient threads.
Thanks!
PS: Below find what I have tried. It does not return anything in "date completed" in my task list...

Hi Edouard,
According to your description, my understanding is that you want to set the ‘CompletedDate’ when the ‘Completed’ is Yes.
You can set the workflow like the screenshot below:
And set the workflow started when a new item is created or an item is changed.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

How to clear the data in my page after user enter submit button

hi......
how to clear the data's in my page after user enter submit button. Actually while pressing first time itself the data is uploaded in database.

Hi Nazeer,
Instead of doing it on the same button better create a separate button for this functionality, As per my understanding you want to clear these fields to create new record so that you can enter a new record so for this you just need to insert a new row in VO.
Still if you want to do it on the same button then you need to put the check that particular record is not dirty if it is not then create new record else create new record.
One more thing if you will clear on the second click of a button how will you update your record??
Regards,
Reetesh Sharma

List View: How to force update of *actual* file dates when sort by date?

List View: How do I force and update of actual file dates when sort by date?
When I go in, I often see the sort order and dates from 12-15 hours ago!
not good

Hi, did you ever get that Windows® Sharing thing worked out?
On this problem, If it's just that you need the Finder to wake up to the fact that it needs to update the window give a try with Refresh Finder - 1.3...
http://www.versiontracker.com/dyn/moreinfo/macosx/33066

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

How to maintain Data availability in Oracle 10g RAC when LOADING the data?

Hi
we are having Oracle 10g server on Sun Solaris(64 bit) with 8 GB RAM.
We are in need of moving the database to "Oracle 10g RAC". (Real Application Clusters)
Our doubt is when loading the data into RAC server, will it affect the application?
coz' we heared that RAC server should be down when we load the data.
Is this correct?
If yes, then How to maintain High data availability when we load the data in RAC server?? Please help me.
Thanks.

First, is this the same question that a colleague of yours posted in this thread?
Data Load in RAC
Second, are other sessions querying the table that you're loading data into? If so, how are you loading the data?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Clear the data region using Maxl

Hi,
I am trying to clear the data region using Maxl query, I am getting error like: Dynamic members not allowed in data clear region specificaion.
+alter database 'PGSASO'.'ASOPGS' clear data in region 'CrossJoin(CrossJoin({[Actual]},{[FY11]}),{[Inputs].Levels( 0 ).Members})';+
(Inputs( not a dynamic member, parent of this meber is a dynamic) comes under Account dim).
I have tried the below code also(Syntax error in input MDX queryon line 1 at token ',').
alter database 'PGSASO'.'ASOPGS' clear data in region 'CrossJoin([Inputs].Levels(0), CrossJoin({[ACT]},{[FY11]}))';
Can anyone do let me know if there is any syntax error or alternate function would be available for clearing level-0 members/descendants under Dynamic parent...
Thanks,
Bharathi

There is no syntax error in your statement. The problem is you input dimension(I guess) has some members with formulas on them and the clear statement does not allow those members to be in the clear. Ther ware a couple of ways around it. seperate out the members with formulas under a different parent and then modify the crossjoin to only pick up the level zero members that are not in that parent or you could put a UDA on formula members and use the exclude command to exclude anything with that UDA

Clearing the data on logout

Hi all,
Flex newbie here.. I just want to know how to clear the data
that i fetched from server on logout. My application have multiple
components and each component have different states. Once i logout
and login, am getting the previous state before i logout. How to
solve this problem? please help me out.

I'd start with the "loginResultHandler" function and use it
to direct the user to a specific component within a ViewStack
whenever they login or log back in.
For example:
[Bindable]
private var currentUser:User = new User();
private var currentFunction:Function;
private function loginResultHandler(event:ResultEvent):void {
currentUser = event.result as User;
if (currentUser.loggedIn)
if (currentUser.roles == "admin")
Application.application.myViewStack.selectedIndex=0;
else
Application.application.myViewStack.selectedIndex=1;
loginForm.visible=false;
currentFunction.call();
else
Alert.show("Login unsuccessful", "Server Authentication");
This may or may not be the answer you are looking for but it
should get you going in the right direction. Check out some of the
great Flex tutorials at Lynda.com (
http://movielibrary.lynda.com/html/modListing.asp?pid=205)
Good luck!

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

BPC 10.0 NW - Journal data when clearing the data

Similar Messages

Maybe you are looking for