BPC 10.0 Technical ID of Multiprovider

Hej Gurus,
We made the first transport from DEV to PRD for about 18 months ago, and at that time there were no notes for stabalizing the technical names during transport. Therefore, The technical names of all the different objects in BW is now not aligned, and this gives a lot of problems.
We have managed to align the technical names of all models and dimensions, and we are now also aligning the technical name of the attributes. This is not a problem.
However, the multiproviders are also disaligned, and I would like to know, when this can become problematic? And if so, how do we align them? I cannot find any notes describing the multiproviders, but there are notes for all the other stuff.
Best regards,
Mikkel Kristensen

Hej Raju,
Thank you very much for your reply.
I have not yet done anything, but we have a problem, because the technical names of the cubes in DEV and PRD are not the same at the moment.
I know the note you have pointed out, and I have imported it, and set the parameters as described in the note. However, when I run a transport, the technical name is not changed.
Do you know anything about the note, and have you tried to use it? Do we need to clear the cube before the transport to enable the aligning of names?
My idea of deleting the cube is just a result of not succeeding in aligning the technical names using the above note.
Best regards,
Mikkel Kristensen

Similar Messages

  • BPC Functional vs Technical Consultant

    Hi All,
    What is the difference between BPC Functional Consultant vs BPC Technical Consultant?   Looking at Dice, there are many jobs for both fields but for Techincal consultant it seems you need more software specific knowledge.
    Please kindly advise.
    Thanks

    Hi Fahad,
    Technical consultants require the in-depth knowledge of how BPC is configured. How are the objects created in the system. It basically involves the creation and configuration of various objects and functionalities in the system.
    Functional Consultant needs to have a good understanding of the business and should also know how BPC works. Their responsibility includes understanding of the business requirement, and based on that they should be able to prepare the design document. This requires a good knowledge of the overall business, and also about the BPC system.
    Hope this helps.

  • BPC Multiprovider

    Hi,
    I have few modelling questions.
    We created a BPC Sales plan application. This created in BW, BPC Multiprovider and BPC Infocube.
    1) Can we create another BPC Infocube for ACTUALS that can be attached to above BPC Multiprovider ?
    2) If I execute full optimize, it will change BPC PLAN INFOCUBE but will BPC ACTUAL INFOCUBE Remain Intact with MULTIPROVIDER ?
    Regards

    Hi,
    1. Yes, you can attach ACTUAL InfoCube to BPC MultiProvider, but you'll have to do this in every environment because BPC MutiProvider is not transported, but generated.
    2. You need Full optimization only if you have more than 13 Dimensions your Application. An yes, Full optimization is not going to do anything wit your ACTUALcube or MultiProvider.
    Regards,
    Gersh

  • Design studio with BPC

    Hello Experts,
    How can I connect Design Studio with BPC cubes. I am Using DS version 1.3
    I need to create Design studio with BPC data.
    Gone through some documents but couldn't find out the way to do this.
    Regards,
    LKumar

    Hi Kumar,
    I have implemented a design studio on top of a BPC model by enabling the "use a source of data" in the BPC Admin website - it creates a multiprovider (name /CPMB/xxx) and we can then create bex queries on top of it with some limitations (no currency convertion by eg.).
    Design studio is managing this query as a standard BEX query - Only to display data ...
    Regards,
    Thomas
    PS: Please pay attention with multiple systems as BPC objects can have different names when transported (attributes). All references of BPC objects in Design studio would be then incorrect.

  • Change multiprovider which is assigned to aggregation level

    Hi guys,
    is there a easy way to change multiprovider which is assigned to aggregation level?
    We have already some queries, filters and functions on the aggregation level. So we cant simply delete it and create another one. I just want to change multiprovider definition under the aggregation level as we decided to change naming convention for multiproviders.
    Thanks in advance.
    Zafer

    Hi,
    Aggregation levels are built on top of specific multiprovider. And you can not change the technical name of multiprovider.
    But you can try following approach,
    1) Create copy of current multiprovider, and then create aggregation level on top of that multiprovider.
    2) Now try to copy the queries from source aggregation level to target using 'RSZC' transaction.
    I am not sure whether this will work or not, but you can just give a try.
    Regards,
    Durgesh.

  • (BPC) Is it possible to work 200 user simultaneously?

    Hello, BPC Experts.
    We have the requirement for simultaneously working about 200 user.
    Does BPC support such loading?
    Could you please provide me some technical specifications.

    Hello Dmitry,
    It is certainly possible to have 200 concurrent users working with BPC and the technical guidance depends on the answers to questions like:
    - Which version of BPC are you using
    - Which version of Microsoft SQL are you using (if using BPC for Microsoft)
    - Complexity of reporting (Size of reports, number of dimension member formulas)
    - Amount of data being loaded and amount of logic being calculated
    - Amount of business logic being executed
    - etc.
    Some general rules of thumb for the Microsoft release are to have around 50 users per .NET server (a max of 75 unless there is a very simple application set) and to make sure to deploy on a 64 bit architecture where possible (for example, Microsoft SQL server 2008, etc).  Note - the .NET tier for the Microsoft release currently only supports a 32 bit architecture.
    These recommendations generally hold true for the NetWeaver  release as well in the sense that the ABAP / Database tiers should be implemented on scalable hardware.  The .NET tier in the NetWeaver  release operates in a slightly different way than on the Microsoft release.  It communicates with the NetWeaver  tier using RFC requests and each ABAP  instance has a hard limit of 100 possible RFC connections.  Because of this it is not possible to have more than 100 users per .NET server in a NetWeaver  installation without queuing occurring and loading the servers to the maximum extent would not be recommended.
    Ultimately, BPC will support 200 concurrent users (and more), though load testing can be done to validate your hardware / business processes once you application set and business processes are in a testable state.  There are some HowTo Guides on SDN related to BPC and LoadRunner that review the load testing process with BPC.
    Thank you,
    Daniel

  • Activate a property

    Hi experts,
    I m working in a BPC project. From the BPC administrator, I can create properties directly in BPP (production), so the BPD
    (development) properties  are different from BPP properties. I need to activate a property inside  a multiprovider, but I can't modify this property in BPP. If I modify this property in BPD and I transport it, I  think I ll produce an inconsistency (technical names are different).
    Is it posible modify this property from BPC, to activate it inside the multiprovider??
    Thanks!

    Hi,
    The property is created directly in BPP by BPC, so I don't have the same property in BPD. If I create the property in BPD, the  technical name will be different from BPP. So i think, is not a good idea transport this property from BPD to BPP.
    Maybe in BPC adnministrator there is an option to activate this property directly in BPP....
    Thanks you for your help!

  • Display Text in a query as a symbol

    Hi everyone,
    I have a query (BI 7) that displays runtimes of BI applications (generated from technical content -0TCT_MC01 multiprovider).
    In the rows there is 0TCTBIOTYPE (type of BI application) which usually displays texts as below:
    query
    Web Template
    I would like to show in the report the symbol (image) instead of the key/text of this infoobject.
    Any idea?

    Hi Reuvel,
    Nice requirement.
    Not sure 100% but from my memory i guess we can display the image for characteristic, instead of text or key by using Analysis web item Using parameter modification in WAD .
    Kindly check for Modifcation parameter Display image Module (com.sap.ip.bi.*.Documentcontent) in WAD, it might solve your purpose.
    Regards,
    Ashish

  • Difference in Webi Report from BPC Multiprovider and BW Multiprovider

    Hello Gurus,
    I'm new in Webi but I have knowledg in SAP BI 7.0.
    The problem is as follows:
    BPC generates in BW some structures for its applications like Infocubes and Multiproviders.
    I create an Universe from BPC Multiprovider. When I creted the Webi Document, I can not see the hierarchies or parenths associated to the dimension in the bpc application (Multiprovider y BW). To solve this I create a BEx Query to associate the hierarchy in the characteristc an create an universe from the BEx Query. The problem of this is that I have to create a BEx Query and universe for every single parenth in the bpc dimension.
    Other test that I did was create a Z multiprovider from the BPC Infocube an build an Universe from it. When I create the Webi Documento now appears all hierarchy.
    Is something like a difference between the multiprovider that generates BPC and the multiprovider created natively in BW.
    Are there some corrections to fix the multiprovideres generated by BPC?

    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0b0ae66-071d-2c10-5dab-89349a9dc40d?QuickLink=index&overridelayout=true
    BPC Multiprovider
    BPC multiprovider
    http://sapbpctutorials.blogspot.com/2011/04/reporting-plan-and-actual-values-in-bpc.html
    http://www.insiderlearningnetwork.com/molly/blog/cat/Crystal%20Reports

  • What's the role of a Technical Consultant (ABAPer) in BPC/OutlookSoft?

    Experts,
    1) What's the role of a Technical Consultant (ABAPer) in BPC/OutlookSoft?
    2) Do ABAPers perform the Conversions/Transformations/Mappings etc?
    3) Are the data imports and exports done by ABAPers?
    NW

    >
    NW wrote:
    > Experts,
    >
    > 1) What's the role of a Technical Consultant (ABAPer) in BPC/OutlookSoft?
    > 2) Do ABAPers perform the Conversions/Transformations/Mappings etc?
    > 3) Are the data imports and exports done by ABAPers?
    >
    > NW
    Some of the planning functions require script writing or coding. ABAper is helpful in creating such codes.
    In our scenario, ABAPers created the conversion/ transformation as per mapping prepared by the Functional Consultant.
    The functional / business users do upload and download of data (imports and exports) wherever required.

  • Stabilize technical names during BPC 10 migration

    Hello Experts,
    I am working on a migration project to BPC 10. We are facing a big issue when it comes to choosing a scenario.
    We have 40 Bex Queries et 6 Workbooks supporting by a multicube containing 3 BPC Infocubes. I know this is not a best practice but it is current situation.
    As a result we want to stabilize the technical names in the BPC Infocubes and InfoObjects during the migration.
    To do so, I know the restore option : "Use tech names from Backup Files". My question is :
    Will the program "UJT_MIGRATE_75_TO_10" modifiy these tech names?
    Best Regards,
    Axel LEMAITRE

    Hi Mikkel,
    Did you have any luck with this?  The only time I had any luck was changing the target structure (adding a dimension in the target), when the transport went through it changed the structure and reset the technical name to the source name.  It doesn't appear to work if the technical name is not due to be reset.
    Best,
    Chris

  • BPC 10.0 NW - Change technical cube name during transport

    Hej gurus,
    One of our users have run a full optimization, and therefore the technical names of the cubes in DEV and PRD are no longer the same.
    We have looked at the SAP notes, and found the following.
    1689814 – “Stabilize InfoCube's technical name in the modeling process”
    We have made sure the note is on both DEV and PRD, and we have enabled "ENABLE_FIXED_CUBENAME" on all models. By doing this the notes states that:  "If the InfoCube technical names of the model are different between source and target system, the technical name of the InfoCube on target system would be changed to the same as the technical name of the InfoCube on source system."
    When I run the transport, the transport is succesfull, but the technical name has not changed.
    Therfore, I would like to know, if anybody have tried using this note and successfully changed the technical name? If yes, what did you exactly do? Did you transport everything for making it work? clear the database?
    I hope somebody can help us.
    Best regards,
    Mikkel Kristensen

    Hi Mikkel,
    Did you have any luck with this?  The only time I had any luck was changing the target structure (adding a dimension in the target), when the transport went through it changed the structure and reset the technical name to the source name.  It doesn't appear to work if the technical name is not due to be reset.
    Best,
    Chris

  • Error in Multiprovider consistency check after technical upgrade

    Hello,
    We have upgraded our BW system from 3.5 to 7.0 now.
    When I check the consistency of Multiprovider it gives me warning message that CMP Problem occurs with one of the info provider.
    Because I have used 0MAT_PLANT info object into my cube.
    I have a Multiprovider which is combined with 4 basic cubes. Two of the cube has 0plant and 0mat_plant info object.
    In other two cubes (C and D) have only 0plant and no 0MAT_PLANT is used.
    When I checked the Multiprovider for consistency, it shows me warnings that CMP Error occurred in the info provider C and D, So it requires to add the 0MAT_PLANT in the basic cubes C and D and then do the identification in Multiprovider.
    But this info object does not contain any data in the basic cube.
    Please help me to understand the impacts on this issue.
    Thanks in Advance.
    Regards
    M.A

    Hi,
    Thanks for the resposnse.
    But when i go through the OSS notes it is provided that there will be performance problem in executing the report.
    How to get it solved?
    Thanks,
    Regards
    M.A

  • Technical Architecture as for BPC 7.5 NW

    Hi Experts,
    I am begginer of SAP BPC 7.5 NW, actaully have lots of experience on MS version, but do not know exactly the configuration of BPC 7.5 NW.
    In MS version, MS OLAP is the basis of BPC MS which mean you need to install OLAP with SQL in DB layer first before installing SAP BPC MS. Therefore there are text direction in the installation guide for MS SQL and OLAP.
    But I could not find any BI/BW installation in the installation guide of SAP BPC 7.5 NW, and I saw several articles that RFC is the bridge of BI. Does it BPC contains BI/BW (Maybe ApShell is cube sets and can be installed without BI/BW seperate installation)?
    Thanks in advance,
    Regards,
    YH Seo

    Hi YH Seo ,
    Hope you already completed your task but still i want to answer your question..
    In BPC installation guide they not mention steps for BI installation however if you dont have installed BI then you need to install BI. Please refer Installation Guide at https://service.sap.com/installnw70..
    Once you installed BI system then you need to apply software component CPM Business Planning and Consolidation (CPMBPC) in your BI system and refer section Configuring the ABAP Server Component from installatin guide of BPC NW.
    Does it BPC contains BI/BW (Maybe ApShell is cube sets and can be installed without BI/BW seperate installation)?
    => No BPC does not contain any cubes. Without BI installation you can use SAP BPC NW version.
    Hope it will help you.
    Thanks
    Deepak

  • Short dump MESSAGE_TYPE_X in displaying data from BPC Virtualcube

    Hi Experts,
    I am experiencing an error when try to display data from a BPC VirtualProvider Infocube (both from Workbench and with LISTCUBE transaction).
    This kind of virtualcube is auto generated by BPC.
    When I do some kind of selection I obtain this error: MESSAGE_TYPE_X
    Short text of error message:
    System error in program SAPLRRK0 and form CHECK_KHANDLE (see long text)
    Technical information about the message:
    Message class....... "BRAIN"
    Number.............. 299
    Variable 1.......... "SAPLRRK0"
    Variable 2.......... "CHECK_KHANDLE"
    I have another BPC vitualprovider and this doesnu2019t happen.
    I would use this cube inside a multiprovider, that has a BI cube too, and get the data through a BEx query. But the query throws the error and stopped.
    I know that there could be problems with BPC structures (i.e. changes in tech name when transporting it), but at the moment I donu2019t see other solution to compare BI to BPC data.
    I went through other posts in sdn forum for this issue, but I am not able to get the exact solution,
    please help
    Thanks,
    Marco
    System version:
    BW:     701 level 0007
    BPC:     750 level 0005

    Hi Lokesh,
    I read the note you have indicated.
    For the first note 1479393: I donu2019t have hierarchies and the error appears in a different program to what is indicated in the note. This is where terminated:
    Termination occurred in the ABAP program "SAPLRRK0" - in "CHECK_KHANDLE".
    The main program was "GP4LQ7N6RS4RUB6HA69UREYGPKB ".
    In the source code you have the termination point in line 34
    of the (Include) program "LRRK0F05".
    Furthermore, there are no calculated measures nor members in the MDX statement, because I just try to display the data from the virtualcube.
    For the second 1448691: yes, it could be a performance related problem. Indeed, when I apply stronger filters, the error doesnu2019t occur and I got the data. But the system is already patched to SAPKW70107.
    So, do you have any other ideas?
    Thanks,
    Marco

Maybe you are looking for

  • Mapviewer view zoomed out within BI report

    Hello, I'm trying to troubleshoot an issue with a mapviewer map within a BI report showing the map zoomed way out. This map is a FL state map with the cities within the states marked. The geometry theme "FL_CITIES" preview fine on the MapBuilder.jar

  • What is Record to report?

    Hi friends, What is record-to-report (R2R) in SAP FI? If you have any documents relating to this please send me to [email protected] I will reward points for helpful answers. Thanks Ram

  • Can 32-bit plugins remain in plugin folder and not crash Logic?

    Pre-sales question: 1) If you have any 32-bit plugins in the plugin folder, can they just be disabled in the Logic X AU manager, or do they crash Logic X upon launch? The reason I ask is because I wanted to keep some in the folder for when I use anot

  • Adding TS commands to toolbar in OI

    Hi, is it possible to add TS commands to a toolbar of a CVI written OI similar to TS_InsertCommandsInMenu? Thanks in advance for support. Regards Steffen Schmdit

  • Collection issue

    Hi I have a function that returns a collection. In my package i call this function and i have to insert the returned collection into a vaarchar2 field of table. Here is the sample code: Function fun( deptno) return collection; begin insert into emp_n