BPC 10.1 Unified - error when selecting a planning function

Hi BPC experts,
configured planning function in BW-IP.
Opened EPM Add-in, went to data processing tab to look for the planning function, Found it but when tried to select the function got the following:
epm error: object reference not set to an instance of an object
I did some research and it seems that this error seem to appear for multiple reasons so I am just wondering if anyone seen this error in this context.
tested it further with as many planning functions I found in BW and got this error message every single time.
thanks
Paul

Hi Paul,
I've faced with the same issue. Have you resolved it?
Thanks a lot.
Tatsiana

Similar Messages

Error when execute a planning function on selected line

Hello together,
we are using SAP BusinessObjects Analysis 1.4 SP9 (1.4.9.3241, Office 2013) and SAP BW 7.3 SP 11 (SAPKW73011).
When executing a planning function on an selected line in the crosstab, the following error appears:
The VBA Coding used is from HowTo Execute a Planning Function on Selected Lines in an Analysis for Office Workbook.
The Code worked fine with an older version of SAP BO Analysis and Excel 2007.
Going to debugging:
As you can see in the screenshot, the selected line (Dimension "0PRODUCT") is selected correctly.
The settings for the planning function are the following:
Thank you in advance for any advice.
Best regards
Alex

Hello together,
we are using SAP BusinessObjects Analysis 1.4 SP9 (1.4.9.3241, Office 2013) and SAP BW 7.3 SP 11 (SAPKW73011).
When executing a planning function on an selected line in the crosstab, the following error appears:
The VBA Coding used is from HowTo Execute a Planning Function on Selected Lines in an Analysis for Office Workbook.
The Code worked fine with an older version of SAP BO Analysis and Excel 2007.
Going to debugging:
As you can see in the screenshot, the selected line (Dimension "0PRODUCT") is selected correctly.
The settings for the planning function are the following:
Thank you in advance for any advice.
Best regards
Alex

Error when creating a planning function

hi,
I am creating a Planning function type using RSPLF1. Also i have created a custom class for the same. But when i try to create a planning function through RSPLAN, and using this custom planning function type, I get the following error:
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0
    at java.util.Vector.get(Vector.java:733)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.hlp.FromToStore2.getToList(FromToStore2.java:74)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp._fillTableFromStore(FromToHelperComp.java:1422)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp._loadAll(FromToHelperComp.java:1825)
    at com.sap.ip.bi.plan.sb.plandialogcomps02.fromto.FromToHelperComp.setAll(FromToHelperComp.java:388)
    ... 53 more
Can anyone let me know what this means and what I am missing ?

Hi,
Generally these error come when we manually enter the value in the Visible and Input column. Instead we should try select value from the Drill down options which gets generated based on the Time Bucket Profile you have selected as input for Planning Horizon.

Error when select posting level in document type

Hi,
Did anyone have an experience to face the Abab run time error when select "posting level" in document type?
The Error is : GETWA_NOT_ASSIGNED
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UC_ITKEY_FACTORY===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.

If you searched the notes, as Dan proposed (and didn't find anything relevant), and the answer to the Greg's question is positive, then I would suggest regeneration data basis and ConsArea due to data model inconsistency.
If it doesn't not help - open customer message to SAP.
Edited by: Eugene Khusainov on Jan 26, 2010 10:26 AM

Error when selecting volume

Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Does anybody have a clue what I need to do to get my Time Machine working again?
Thanks!
BB

Bauke Boezeman wrote:
Hello,
I just restarted my Maxtor external hard disk (which I use for time machine) because my Mac did not recognize it anymore.
Now it does but I get an error when selecting the volume for Time Machine. The error says:
"The file '.0011246f8842' can not be saved in the map 'Time Machine-reservekopieen'."
Hi, and welcome to the forums.
I'm not sure if that's the same message, but it sounds like a common permissions problem.
Try this: Open the Terminal app (in your Applications/Utilities folder).
In Terminal, the prompt looks like this: user-xxxxxx:~ <your name>$
(where <your name> is your short user name). It's followed by a non-blinking block cursor (unless it's been changed via Terminal > Preferences).
At the prompt, type the following exactly as shown, substituting the name of your TM drive exactly, including any spaces, between the quotes:
sudo chmod 644 /volumes/"TM drive name"/.0011246f8842
Press Return. You'll get some warnings and a request for your Administrator's password. Type it in (it won't be displayed) and press Return again.
Then try a +Back Up Now.+

Error when selecting the Report Center tab of the Issues web DB

I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?

Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE

제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------

Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK.

"Initial column cannot be generated" error when creating a planning book

Hi,
I have an error when creating a planning book with the planning book wizard. In the tab "data view", I enter values for the "Visible" and "Input" fields and validate. The following error is generated: "Initial column cannot be generated" and then "Maintain the time for the 'column visible from' field". I tried with different dates, and get the same error.
I am running SCM 5.0.
Any help would be greatly apreciated.
Regards,
Mikael.

Hi,
Generally these error come when we manually enter the value in the Visible and Input column. Instead we should try select value from the Drill down options which gets generated based on the Time Bucket Profile you have selected as input for Planning Horizon.

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Error when calling SOAP Runtime functions - Please help!

Hi,
Very new to SAP. I just installed SAPNW7.0ABAPTrialSP12 (sandbox server, with default options) and setup the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/7c623cf568896be10000000a11405a/content.htm">Flight Data</a>.
I wanted to invoke some of the Flight Data functions through SOAP. So I invoked the following URL:
http://localhost:8000/sap/bc/srt/rfc/sap/BAPI_FLIGHT_GETDETAIL?sap-client=000&wsdl=1.1
I get the following error:
The following error text was processed in the system NSP : Error when calling SOAP Runtime functions
The error occurred on the application server hs_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: HANDLE_REQUEST of program CL_SOAP_TRANSPORT_EXTENSN_ROOTCP
      Method: HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP
FROM Runtime Error Log:
Runtime Errors                     UNCAUGHT_EXCEPTION
Exception                          CX_SOAP_CORE
     Termination occurred in the ABAP program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCP" -
           in "HANDLE_REQUEST".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 37
          of the (Include) program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCM004".
Does anyone have any ideas on what is going on? Thanks in advance.

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Error when selecting system during scheduling of background job in RAR

Hi,
I am getting an error when I attempt to schedule a background in RAR. It happens when I go to the multiple system selection option. I select a system and click copy. An error example below appears in the logs even when I dont go ahead and schedule the job. The job still runs and returns results when scheduled. However these errors in the logs concern me. Anybody else experience this?
Aug 4, 2010 4:12:32 PM com.virsa.cc.common.util.ExceptionUtil logError
SEVERE: NodeElement(.BatchRiskAnalysisSelection.RoleAnalysisInput.RoleAnalysisSystems): unknown attribute Sign
com.sap.tc.webdynpro.progmodel.context.ContextException: NodeElement(.BatchRiskAnalysisSelection.RoleAnalysisInput.RoleAnalysisSystems): unknown attribute Sign
     at com.sap.tc.webdynpro.progmodel.context.NodeElement.wdGetAttributeInfo(NodeElement.java:374)
     at com.sap.tc.webdynpro.progmodel.context.NodeElement.setAttributeValue(NodeElement.java:877)
     at com.virsa.cc.common.GUIElement.copyAttributes(GUIElement.java:696)
     at com.virsa.cc.common.GUIElement.copyNodeTree(GUIElement.java:792)
     at com.virsa.cc.common.GUIElement.copyNodeTree(GUIElement.java:777)
     at com.virsa.cc.common.ui.MultipleSelectionView.onActionCopy(MultipleSelectionView.java:187)
     at com.virsa.cc.common.ui.wdp.InternalMultipleSelectionView.wdInvokeEventHandler(InternalMultipleSelectionView.java:259)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
Regards,
Niamh

Hi
Did you check the connector whether the background system is connecting or not.
Goto RAR-Configuration>connectors> select the connector of the background system and then press on test connection.
Regards
Hari

Error when selecting a user

Hi everyone:
We have implemented SAP NetWeaver 7.0, and we defined "ABAP System" as Data Source.
We've come across a strange error while selecting some particular users (clicking on user) in Netweaver under User Management -> Identity Management > Selecting a User (clicking on user)
"java.lang.NoSuchMethodError: com.sap.tc.webdynpro.services.sal.url.api.WDURLGenerator.isSecureURL(Ljava/lang/String;)Z"
So far, this error has happened only when selecting a user that has the E-Mail field defined in the ABAP side. If we delete the E-Mail address from de ABAP account and then select the user in the Java Identity Management, the error disappears and the user account is perfectly shown.
Any suggestions guys??
Regards,
Pablo Vaquero

Hi Ravi,
Thank for your reply.
That indeed is the issue!... Since we have defined "ABAP System" as the Data Source, the E-Mail field can only be mantained on the ABAP side. But, as I've said on my previous post, when we fill this field in the ABAP side for any particular user and then want to see this change in user details on the UME side, when clicking on that particular user we get the error mentioned above.
Regards,
Pablo

Error when selecting values in column prompt

Hi,
I have one report in OBIEE with large filter on it, it was giving error initially, but i modified filter, i'm getting results in results tab now, but when i'm selecting values in coloumn prompt, i'm getting error.
Error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for Business Unit.BU Business Unit Code are compatible with the detail filter.
Query is going through three dimension tables and one fact table. But in BMM layer, each dimension table is joined to 4 fact tables.
I'm not able to resolve this error.
Please give me any suggestions to solve this error.
Thanks in advance.

Hi All,
FYI...
This is a bug in the application.
SR Update: There is a known issue of ODBC throwing the 26002 error when any SQL with a length of greater than 64KB characters is encountered. This has been filed as BUG 8251994.

Error when selecting Activity Guide item from BPM Workspace

Hi,
I've installed 11.1.1.6 SOA/BPM onto my local machine.
I've deployed an Activity Guide example. This loads fine when i create an instance, the GUI loads and i can see the process progress on the left hand side.
I have created my own test app and deployed it. I can see an instance in the Activity Guide List; however when selecting it the GUI doesn't load and i get an ADF error thrown.
I can view the task from the Task List and open the GUI just fine. It only seems to be when selecting it from the Activity Guide List that i experience the problem.
The error i can see in the logs is this:
Caused by: java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.NullPointerException
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at oracle.bpel.services.workflow.activityguide.query.ejb.AGQueryService_kcuma2_EOImpl_1036_WLStub.getAGDisplayInfoDetailsById(Unknown Source)
     at oracle.bpel.services.workflow.activityguide.query.client.AGQueryServiceRemoteClient.getAGDisplayInfoDetailsById(AGQueryServiceRemoteClient.java:101)
     ... 112 more
Any ideas?
Kind Regards

I've had the same issue with activity guides in 11.1.1.6 the last couple of days and thought I had been doing something wrong. Wish I'd seen your post sooner.
Guessing it's a bug - know there's a patch set out - perhaps it's fixed in that.

BPC 10.1 Unified - error when selecting a planning function

Similar Messages

Maybe you are looking for