BPC 10.1 Web administration links doesn't work

Hi
All,When lon on BPC Web.Click administration.Can not open any links.As notes 2053377.Can not solve the issue yet.

Toy,
did you apply the post delete steps:
Open the web browser and clear the client side cache.
Input URL http://<server>:<port>/sap/epm/bpc/web/clearcache
( set <server> as your system host name, set <port> as your system
port number).
Input URL http://<server>:<port>/sap/epm/bpc/web/resetcachebuster
( set <server> as your system host name, set <port> as your system
port number).
It is important to clear and reset the cache afterwards for the links to work in your browser.
Have you tested on other client machines to see if no one can still access the links?
Have you tried with other browsers besides Microsoft Internet Explorer?
If the issue is still occuring and is generalized to all client machines please use the F12 key to turn on Internet Explorer debugging and see what error messages you see in the Console view. If they are still the same as described in Note 2053059 and you are sure you ave deleted the duplicate folders (and that you are connecting to the web URL for that environment and not a different environment which you have not cleared yet) then please open a Support Incident and we will investigate further.
Regards,
Peter Kreutlein

Similar Messages

Web fault reporting doesn't work

My phone line was tested and it came back as working but it isn't. I have removed all extensions and tested with 2 different phones at the master socket and a fault still occurs. The line works after a fashion but doesn't ring properly and also sometimes loses the incoming phone number information. Broadband is ok.
But the BT web site won't allow me to report it because the line was tested as ok but I know it isn't. This is a failure of customer service.
Also this link doesn't work (I am using Mozilla Firefox not Internet Explorer but this shouldn't make a difference)
https://www.bt.com/consumerFaultTracking/public/faults/reporting.do?pageId=21&s_cid=con_FURL_faults
So I can't use the web site to report the fault and I had to call an 0800 number with a mobile.
Not good.

The website is working fine from your link posted also you can call BT from this number From a mobile: 0330 123 4151 the charge for this call will come from you mobile calling plan
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided.

How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.

No. I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.

Personalize link doesn´t work

Hi Everybody,
I´m getting an access denied error when I click on the Personalize link in the portal masthead iview. This is what I did:
1) I copied the eu_core_role.
2) I copied the personalize workset.
3) I deleted the home content in the new eu_core_role.
4) I assigned the new personalize workset to the new eu_core_role as a delta link.
5) I assigned the new eu_core_role to users and user groups.
6) I checked the end user permissions for these users and user groups.
After these steps, the link doesn´t work.
We´re on Netweaver Portal SP14.
I tested the Personalize link with the portal URL fully qualified (DNS) and not fully qualified (just hostname).
Can somebody help me?
Thank You very much for Your help.
Regards.
SS.

Hi again,
Another question:
After I assigned the new eu_core_role to users and user groups, the tool area search doesn´t work. It shows an access denied error, too. This error seams to be related to changes on eu_role, isn´t it?
The tool area search and the Personalize link only work with administrators (users with admin roles).
I´ll appreciate Your help.
Regards.
SS.

JDeveloper 10.1.3.4 download link doesn't work.

Have anyone downloaded new version of JDeveloper (10.1.3.4) ? Download link doesn't work for me.
http://www.oracle.com/technology/software/products/jdev/htdocs/soft10134.html
Kuba

I also have the same issue.
Looks like they are working on it, this message is on the top level Downloads page:
Important Note: As of 2:30pm PT Sept. 18, OTN software downloads are currently unavailable. We apologize for any inconvenience and are working to restore them as quickly as we can.

WRT54GL Need the TFTP EXE link or file please, FTP link doesn't work 550 error.

Bricked the router, bad flash. Power LED is flashing.
Need the TFTP excutable please, FTP link doesn't work.
Thanks.

Try this link to unbrick the Linksys Router.Download 44.3 KB the TFTP utility.
Message Edited by Wizzard on 10-07-2009 09:38 AM

Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

BPC 7.5 Web Administration / Set App Params asks for AntiXSSLib 1.5

Hi. We have now installed BPC 7.5 in our test environment, but are facing a problem.
According to the installation guide, we have installed Microsoft AntiCross Site Scripting Library 3.0 on our app/web-servers.
But when trying to enter "Set Application Parameters" in the Web Administration tool, we get an error quite not expected:
Any ideas of why it asks for v1.5, which were used by BPC 5.1?
Server Error in '/OSoft' Application.
Could not load file or assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileLoadException: Could not load file or assembly 'AntiXssLibrary, Version=1.5.0.0, Culture=neutral, PublicKeyToken=bcdc0d0c766dd6e4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
   OSoft.SetAppParameters.GetList() +0
   OSoft.SetAppParameters.Page_Load(Object sender, EventArgs e) +725
   System.EventHandler.Invoke(Object sender, EventArgs e) +0
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3053
Edited by: Malin Westlund on May 5, 2010 9:23 AM

Hi Malin,
You are having a problem with you AntiSssLibrary.dll. Either it is not installed correctly or it is corrupted or in the wrong version.
You can take the following steps to ensure that you have a fully functional version of the Microsoft Anti-Cross Site Scripting Library:
1) Download the Microsoft Anti-Cross Site Scripting Library V1.5 from http://www.microsoft.com/downloads/details.aspx?FamilyId=EFB9C819-53FF-4F82-BFAF-E11625130C25&displaylang=en
2) Uninstall the current version of Microsoft Anti-Cross Site Scripting Library and remove any AntiXssLibrary.dll file from your server;
3) Install the version that you have downloaded from the MS website;
4) Copy the AntiXssLibrary.dll file from C:\Program Files\Microsoft Corporation\Anti-Cross Site Scripting Library V1.5\Library\.NET 1.1\   (Make sure that you're copying from the .NET 1.1 folder, not 2.0);
5) Paste it under your \BPC\Websrvr\Web\bin folder and restart IIS.
Best regards,
Rodrigo

Command Link doesn't work - may be a bug

Hi all,
I'm using JDev 11g. I added two pages to the adfc-config.xml file and a controlFlowCase from one to another. Page1--> Page2 The action name is "aaa".
And then i added a command link to the Page1 and selected the action name "aaa". Now i'm click the command link, but it doesn't work. I'm shocked. What is the problem? It's so basic thing.
Erdo

I'm running just like you said. Here is the error log :
oracle.jbo.JboException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-29000. Error message parameters are {0=java.lang.NullPointerException, 1=null}
     at oracle.adf.model.binding.DCIteratorBinding.reportException(DCIteratorBinding.java:376)
     at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1693)
     at oracle.adf.model.binding.DCIteratorBinding.internalGetRowSetIterator(DCIteratorBinding.java:1645)
     at oracle.adf.model.binding.DCIteratorBinding.refresh(DCIteratorBinding.java:4395)
     at oracle.adf.model.binding.DCExecutableBinding.refreshIfNeeded(DCExecutableBinding.java:341)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.isAttributeUpdateable(JUCtrlValueBinding.java:1647)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.isAttributeUpdateable(JUCtrlValueBinding.java:1754)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.isUpdateable(JUCtrlValueBinding.java:2610)
     at oracle.adfinternal.view.faces.model.AdfELResolver._isReadOnly(AdfELResolver.java:96)
     at oracle.adfinternal.view.faces.model.AdfELResolver.isReadOnly(AdfELResolver.java:112)
     at javax.el.CompositeELResolver.isReadOnly(CompositeELResolver.java:353)
     at com.sun.faces.el.DemuxCompositeELResolver._isReadOnly(DemuxCompositeELResolver.java:290)
     at com.sun.faces.el.DemuxCompositeELResolver.isReadOnly(DemuxCompositeELResolver.java:319)
     at com.sun.el.parser.AstValue.isReadOnly(Unknown Source)
     at com.sun.el.ValueExpressionImpl.isReadOnly(Unknown Source)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
     at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:128)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:340)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeFormItem(PanelFormLayoutRenderer.java:1015)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.access$100(PanelFormLayoutRenderer.java:46)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1491)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer$FormColumnEncoder.processComponent(PanelFormLayoutRenderer.java:1410)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:170)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:290)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:255)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeChildren(PanelFormLayoutRenderer.java:352)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.encodeAll(PanelFormLayoutRenderer.java:187)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
...

Sub-report link doesn't work at run-time

We have a main report and a sub-report linked to main-report. On clicking the sub-report link in the CR 2008 designer, sub-report page with data is rendered properly. Same doesn't work programmatically at run-time using Java SDK library (JRC). Any thoughts/suggestions?

Hi,
I am facing same problem. Please help.
Thanks,
Chanchal

Shared iCloud photostream link doesn't work

Dear friends
Could you please help me. I'm trying to share my photo in iPhoto using icloud photo stream. After I upload all photos I click on a link "Visit Site" and get an error "icloud can`t find this page"
What`s the issue?
Thank you

Spoke to an Applecare rep but he explained it's too new for them to know what's going on.
While on the phone tried sharing older images, newer images, smaller images and got it to work off and on. Tried creating an album from iPhone that did not work either, the link was a dud.
There's really no rhime or reason to when it works, for the most part it doesn't work.
It appears that you can add to an existing album without any problem so if you were lucky enough to be able to create a few you can manipulate these.
Also would be curious to know if you can set the main thumbnail image, and manipulate the order of the photos?
I'm really missing the MobileMe Galleries, those were a wonderful way of sharing photos and videos!

Links doesn't work

Hi,
I finshed my form and noticed that links in the form doesn't work. I tested in both reader and acrobat.
Does anybody know what is going on?
Thanks

Hi,
You need to set the Target version to v9 or higher:
Here is the form back to you. https://acrobat.com/#d=CxEG4jtBhZPsFksnMg*etg
If you need the form target to be v8 then you could use a regular button with no border or fill and the font set to underline.
Good luck,
Niall

Mailto: Link doesn't work in Safari

In my project, we have a link to open a outlook mail. when i open the link in IE/Chrome/Firefox browser, it opens the outlook with the given mail id. But, same link was not working properly in safari browser.
I am using safari version 5.1.7(7534.57.2). When i click the link, it opens the outlook mail, but my current(Parent) window gets crashed.
Below is the sample code i used.
mc.addEventListener(MouseEvent.CLICK, sendEmail);
function sendEmail(e:MouseEvent):void{
navigateToURL(new URLRequest("mailto:[email protected]"));
Thank in advance

Thanks for your reply..
We already tried that too. But doesn't work.
My problem is after clicking the link, my current window became black screen and it opens the outlook with the given mail id
we are not sure, whether the issue is related to flash player or safari browser.
Any idea?

Mailto link doesn't work

I had gmail set as my default email client for Firefox. It was working fine for a long time, but then, all of sudden it stopped working. Now when I click on email links, new email window opens, but for some reason it cannot fully load, it just gets stuck.
Sometimes when I clear cookies, it will work once, but then stops working again.
I have tried restarting Firefox without addons, but then email links don't work at all.
Also, I tried switching my default email program in Firefox and Control Panel to Outlook, but it doesn't do anything; when I click on email links, it tries to open email window.

Hi fedgosh,
I'd try starting Firefox in [[Safe Mode]] and setting gmail as the default again. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile creating a new profile].
Hopefully this helps!

I give up. You won't let me confirm my question. Link doesn't work.

''locking - your original thread is here - https://support.mozilla.com/en-US/questions/835948 - please continue there''
I have asked my question: Firefox doesn't load, have newest version. Link to confirmation of question doesn't work. I give up. Please help.

Firefox will not open to full page. I just see small icon at bottom on Windows 7 bar. Problem began on June 15. Have uninstalled and downloaded newest version. This did not help.

BPC 10.1 Web administration links doesn't work

Similar Messages

Maybe you are looking for