BPC 5.1 SP11 with SQL SERVER 2005 SP3

Hi all,
i have a BPC 5.1 SP11 single-server installation.
I know the DB Server prerequisite is Microsoft SQL Server 2005 SP2 and cumulative update package 8.
SQL Server 2005 SP3 is supported?
is there any document about compatibility?
have i install SP3 before or after BPC Installation?
thanks

HI Paolo,
SQL Server 2005 SP3 is supported with SAP BPC 5.1 SP3 or any other later version.
We already installed for few customers SP3 and this patch fix bugs into SSAS and also improve some performances regarding SSAS.
So the recommendation will be to apply this patch in your environment because it will bring just benefits.
If you have multiserver installation remmeber that you have to apply the patch in all servers not just into Database server.
Regards
Sorin Radulescu

Similar Messages

Crystal Report 8.5 with SQL SERVER 2005 problems

Post Author: AREVA
CA Forum: Data Connectivity and SQL
Hi All !We have some problems with Crystal Reports version 8.5 with SQL Server 2005: 1) When we want to generate a report (using data in SQL Server 2005) we have a popup message error : "impossible to loaded pdssql.dll".2) If we want to use SQL Server 2005, which Crystal Reports version we must used ? Is there any restrictions with this connectivity with 8.5 version ?Please, let me known, all informations about SQL Server 2005 and Crystal Report 8.5.Thanks for all !Best regards Anthony

Hello Kamlesh,
There is no expectation that the ActiveX viewer (RDC?) from CR8.5 will work in any version of Visual Studio .NET. There is also no expectation that the ActiveX viewer from CR8.5 will work on a machine with a 64 bit operating system.
You're using VS2008. You should migrate to the bundled edition of CR for VS2008 (v10.5), the ReportDocument object, and the .NET Windows form viewer or Web form viewer.
Sincerely,
Dan Kelleher

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

ODI 10.1.3.5 with SQL Server 2005

Good afternoon,
We recently installed 10.1.3.5, in a Windows environment with SQL Server 2005 and Hyperion Essbase/Planning/HFM 11.1.1. We were following John Goodwin's infamous blog (thanks, John!), but ran into a number of snags.
For instance, when we set-up interfaces with flat files as the source, loading metadata either to Planning or Essbase, ODI errors out when:
1) our header name in the flat file has spaces (using double quotes didn't work)
2) our header name in the flat file is different than the reverse property name from Essbase/Planning.
Also, we're now seeing an issue in our Flat file to Essbase metadata interface where the SQL used in the IKM seems to be incorrect. Below is the error message we're receiving:
"org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 20, in ?
com.microsoft.sqlserver.jdbc.SQLServerException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Add a name or single space as the alias name."
We are thinking that the culprit may be either the wrong .jar or .jre we're using with SQL Server 2005, as there seem to be inherent issues with the SQL generated in the LKM and IKM. Our questions to you:
1. What sqljdbc.jar driver version are you using?
2. What .jre version are you using?
3. What environment does the above work correctly in? (perhaps an earlier version of ODI against an earlier version of Hyperion?)
FYI - We have tried sqljdbc 1.0 and 2.0, with .jre 1.6.0_10.
Thanks in advance!
-O
Edited by: Alapat on Jan 22, 2009 8:04 AM

Thank you very much for responding!
After a 2 week battle, we are now finally coming to a close on our issues (although we cannot say for sure what all of the causes were).
Here is what we discovered about our questions, through other threads:
1. John Goodwin was using JRE 1.6.x, so we ruled that out as a culprit.
2. Others are using SQL Server 2005 just fine with ODI, so we ruled this out too. We chose to keep the sqljdbc 2.0 driver.
Here are some issues we did uncover during our investigation:
1. We were having issues with our agent, specifically regarding the HFM technology. We created a new one, added a few extra parameters, compiled the agent, and are now back up and running. We realized the problem when we switched to "Local (No Agent)" and saw that we were not having as many issues.
2. We went into the physical agent and pressed "Update Scheduling". We do not know if this had any effect, but we suddenly noticed that our flat file header issues were resolved.
3. The Essbase issue was due to a configuration error with our Hyperion Essbase physical technology. We went into that technology and changed a setting on the "Languages" tab, called "Object Delimiter". It had double-quotes in it - we removed that parameter and instantly saw a change in the SQL being executed.
4. Some of the mappings in our interfaces needed to be executed on different environments. i.e. - We needed to switch to "staging" when the flat file header was different than the target column name. Newbie mistake - we thought ODI had built-in intelligence to choose correctly for us.
5. When doing a reverse on Essbase models, we noticed that the Essbase columns would populate with an "Undefined" datatype, instead of the expected CHAR. We have to manually define all column datatypes after every Essbase reverse now. Must be a bug.
6. We also noticed when doing a flat file reverse that all columns auto-populate with datatype STRING, length 50. We have to manually personalize that option for different Hyperion applications, based on need. i.e. - some require numeric datatypes, or smaller/larger lengths. This was obviously a newbie error. :)
Thank you for your tip on the MS SS2005 JDBC drivers - we will look into your other options - IMHO, JTDS, etc.
-O

Am failing to install Java IDM in a Windows XP machine with SQL Server 2005

Hi,
I am new to Java IDM . I had downloaded IDM 7.0 and trying to install. But i am failing to install Java IDM in a Windows XP machine with SQL Server 2005.
I used .,
JDK 1.5
Tomcat 6.0
Microsoft SQL Server 2005
Microsoft SQL Server 2005 JDBC driver
I got the following error while trying to connect the waveset database with Repository type as SQL Server 2005(JDBC Driver)
com.waveset.util.ConfigurationError:
==> com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user 'waveset'. The user is not associated with a trusted SQL Server connection.
what name i can specify in JDBC ... is there any need to create DSN for that ...........
The Parameters that I have given for connection are:
URL: jdbc:sqlserver :1433;DatabaseName=
JDBC Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
Connect as User:
Connect Password:

Do you have your SQL server set to Windows Authentication mode only?
You should change it to allow mixed authentication. You can do this in SQL Server Management Studio under Server Properties -> Security.

Integrate Oracle IDM with Sql Server 2005

Hi Guys,
We maintain the employees information in Oracle IDM and we want to integrate Oracle IDM with Sql server 2005.
how we can this.

The DB connector?
The 9.0.1.4 version supports SQL server 2005.
The latest version of the GTC db connector might also work.
Best regards
/Martin

Open (.sdf) file with SQL server 2005 Management Studio

In VS2005, I have created a SQL Mobile database, (.sdf).
Copied that (.sdf) file to Desktop, and when I try to open with SQL Server 2005 management studio, its showing error "make sure the application for the file type (.sdf) is installed."
How can I open this file with SQL server?
Regards
Abinash

You must install SP2 if using Management Studio Express (http://www.microsoft.com/downloads/details.aspx?familyid=6053C6F8-82C8-479C-B25B-9ACA13141C9E&displaylang=en)Erik Ejlskov Jensen, MCTS: WM App, MCITP: SQL 2008 Dev - http://erikej.blogspot.com
Please mark as answer, if this was it.

EPM 11 Configuration with SQL Server 2005

Hello,
I am having a terrible time trying to get the EPM System Configurer to communicate with SQL Server 2005 Evalution. I keep getting the error "Cannot open database "server" requested by the login. The login failed." I have the windows firewall turned off. The protocol TCPIP is turned on and other protocal are turned off. Any suggestions. Thanks in advance.

As John mentioned it is supposed to be supported in a future release. That version would be 11.2 -- there will be a version coming out before 11.2 and it will not support 2008.
Regards,
John A. Booth
http://www.metavero.com

TopLink with SQL Server 2005

Could someone help answer this question:
Has TopLink 10.1.3.x been certified to support SQL Server 2005?
I appreciate your information.
Haiwei

It is certified on SQL Server 2000.
I know some customers are using it with SQL Server 2005, though.

How can I connect NetBeans 6.1 with SQL Server 2005?

Hello guys...
how can i connect NetBeans 6.1 with SQL Server 2005?
there is no SQL Server in Server list when we create a new Web Project and choose Server.
I'm new to NetBeans and this is my first time of posting.
If has some errors and unwanted disturbing,pls understand me. Thanks.
(If you have references or some snippets, i'll be glad if u can share.)
scsfdev

The JDBC-ODBC bridge wasn't recognizing any of the primary keys I had set up in SQL Server. After lots of head banging, here's the solution I came up with:
1. Download the appropriate driver. SQL Server 2000 requires the SQL Server 2000 JDBC driver (http://www.microsoft.com/downloads/details.aspx?FamilyId=07287B11-0502-461A-B138-2AA54BFDC03A&displaylang=en).
SQL Server 2005 download: (http://www.microsoft.com/downloads/details.aspx?familyid=C47053EB-3B64-4794-950D-81E1EC91C1BA&displaylang=en)
3. After installing, right-click on "Libraries" in your project, and choose "Add Library...". Next, give it a name (i.e. SQLServer2000), and select "Class Libraries".
4. On the next screen, find the JAR files (should be in C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\), and add them under the "Classpath" tab. It will now be available under "Libraries" for future projects.
5. You can now create a connection to a specific database under the "Services" tab (next to "Projects" and "Files" in the top left of the screen). Select "Microsoft Sql Server 2000 (Microsoft Driver)" and format the "Database URL" like this:
jdbc:microsoft:sqlserver//YOURSERVER:1433;DatabaseName=YOURDATABASE
1433 is the default port, though your DBA may have changed it.
I posted a simpler version of this on the NetBeans.org FAQ page - they had the following title with no content on the answer page:
"Cannot Select Tables From MsSql 2000 Because It Says No Primary Key Next To Each Table But The Tables DO Have A Primary Key. What Do I Do?"

Breeze with SQL Server 2005

Hi,
it seems that MS SQL Server 2000 isnt available anymore - SQL
Server 2005 is out.
Runs Breeze with SQL Server 2005 also?
thanks

Hi Dav:
SQL Server 2005 won't be officially supported until the next
release
of Breeze, which is expected to ship sometime in the fall.
Hope this helps!
Jeff Von Ward
Breeze Product Support Manager
Adobe Systems, Inc.
On Sat, 1 Jul 2006 12:34:37 +0000 (UTC), "DavHo"
<[email protected]> wrote:
>Hi,
>
>it seems that MS SQL Server 2000 isnt available anymore -
SQL Server 2005 is out.
>Runs Breeze with SQL Server 2005 also?
>
>thanks

DeadLocks on Query Notifications with SQL Server 2008 SP3

Hello,
according to this article https://support.microsoft.com/kb/975090 the issue with deadlocks on query notifications should be fixed with SQL Server 2008 SP3 (10.0.5500.0). But we still get deadlocks in the following manner:
<resource-list>
<keylock hobtid="72057598393909248" dbid="5" objectname="MyDB.sys.query_notification_1411013420" indexname="cidx" id="lock1731c1f00" mode="RangeX-X" associatedObjectId="72057598393909248">
<owner-list>
<owner id="process573dc8" mode="RangeX-X"/>
</owner-list>
<waiter-list>
<waiter id="process58ddc8" mode="RangeS-U" requestType="wait"/>
</waiter-list>
</keylock>
<keylock hobtid="72057598372872192" dbid="5" objectname="MyDB.sys.query_notification_253437289" indexname="cidx" id="lock800c8780" mode="RangeS-U" associatedObjectId="72057598372872192">
<owner-list>
<owner id="process58ddc8" mode="RangeS-U"/>
</owner-list>
<waiter-list>
<waiter id="process573dc8" mode="RangeS-U" requestType="wait"/>
</waiter-list>
</keylock>
</resource-list>
Is there any need to install another fix?
Thanks in Advance!

Hello,
SQL Server 2008 SP4 and all cumulative updates of SP3 do not have fixes related to deadlocks.
Maybe the following workarounds and solutions can help in your scenario.
http://stackoverflow.com/questions/3707137/understanding-deadlocks-with-sql-server-query-notifications
Deadlock Prevention. In case you need to lock multiple conversation groups in a transaction, you need to take the same order to lock the different conversation groups in all transactions, otherwise you will have a deadlock issues.
Source:
http://blogs.msdn.com/b/kangmo/archive/2008/12/17/a-brief-guide-on-sql-server-service-broker.aspx
Try to may transactions more simple and shorter.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL server 2005 SP3 can run SAP B1 2005A SP01 PL51

Hi All,
I could successfully install SAP B1 2005A SP01 PL51 in the SQL server 2005 SP3.
In this link:
http://service.sap.com/smb/sbo/platforms
you won't find it such info.
Why I upgrade, it is caused by the printing error issue using citrix.
Anyone of you that have problem after run the B1 on that SQL, pls share.
Someone who need webex file that shows the install process can request it to me. Let me know.
Rgds,

Hi Arshdeep,
Thx for your reply. I just wonder why SAP did not inform the availability SP3 from Microsoft and the explanation about the inapplicable of SP3 for SAP B1 in the B1 platform link.
I have tested without using any steps and any other procedures. Practice is a good lesson to learn for me. Nevertheless, one concern from modern customers are the compatibility or adaptibility of SAP B1 to Microsoft product especially SQL since it is one of database platform.
Old-fashioned customer will disregard that because they will think as long as my SAP B1 and SQL server still run well, I don't care..
Rgds,

How to access Oracle 8g from SQL Server 2005 SP3 EE 64 Bits ?

Dear All,
How to access Oralce 8g from SQL Server 2005 SP3 EE 64 Bits (liked server).
Best regards,
Miguel Gavinhos

Hi!
For the Oracle version is 8.1.6. what should I install, to access Oracle trought a linked server.
Best regards
Miguel Gavinhos

B1 with SQL Server 2008 and SEC with SQL Server 2005

Hi,
we are currently upgrading from B1 2005 to B1 2007. With B1 2007 we could use MS SQL Server 2008. In parallel we have a SEC implementation (which uses SQL Server 2005).
Would there be any issues with the integration of B1 and SEC although they run on with different SQL Server products?
Thanks
Olaf

Hi
By creating two different instances you can run both simultaneouly. But pls do check whether SEC will run on 2008 or not ?
Ashish Gupte

BPC 5.1 SP11 with SQL SERVER 2005 SP3

Similar Messages

Maybe you are looking for