BPC 7.0 error connect to SAP Component

Dear All,
I just finished installing SAP BPC 7.0 NetWeaver and there is a problem when running on the server manager Diagnostic. There was an error SAP Component. Is there that can give clues or guide?
Thank You,
Yusak

Hi,
You should post the thread on those forum (according to product family):
SAP Planning and Consolidation, version for the Microsoft platform
SAP Planning and Consolidation, version for SAP NetWeaver
It's not the correct forum ,there is separate forum for BPC based on Microsoft or Netweaver
Regards.

Similar Messages

Error while updatig SAP Component Repository in SLD

We are getting the following error while updatig SAP Component
Repository in SLD:
"The import history of the target namespace could not be determined".
We are in the middle of updating SAP CR in SLD from version 2.0 to
version 3.0.
Before updating CR this morning, our 'model version' was 1.4.31 and
CR Content Version (sld/active):No versioned CR imports detected was
defined.
I imported the Model version 1.5.20 using 'cimsap1418_0-10003379.zip'
and while importing the delta 'CRDELTA1418_0-10003379.zip', we are
getting the above mentioned error.
Pls help us to resolve this problem as we took the shutdown time from
business to update the CR in XPD server.
Thanks
Amar

To upgrade from SAP MASTER DATA FOR SLD 2.0 to SAP CR CONTENT UP TO 2007 (technical version is 3.0), you are required to perform the following steps:
1. Import the last delta from 2.0. This comprises model 1.5.20 (cimsap1418_...zip) and the content delta (CRDelta1418_...zip). Before you import the new model, check the parameter RejectUnsupportedCIMQualifiers and the existing model version. Proceed according to Note 907897.
In 6.40 and 7. 0 Support Package 0 - Support Package 9, the import of the model (file cimsap....zip) takes 30-60 minutes. As of Release 7.0 Support Package 10, the import requires less than 1 minute.
2. You can obtain the next update from SAP CR CONTENT UP TO 2007 (3.0).
> as per note 669669

Error: Connect from SAP gateway to RFC Server failed

Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3

Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM

License error connecting to Sap BW from BO InfoView

We installed succesfully the Sap Integration Kit Xi R2 , and the created the universe to connect to Sap BW.
But when we try to access from the BO InfoView to the Sap BW with a proper Sap user we recive an error like that :
"...Unknow user: all the 0 concurrent licenses are in use or the license code is invalid..."
We installed the proper license for the Sap Integration Kit, and the BO is in use and is working well.
We read note 1307794 but seems not usable in our case.
So we do not know wich is the error.
Regards

I'm reading a lot of post in intenernet, but it's difficult to find out wich kind of license is required on BO, if named if concurrent...
We installed the license coming with the Sap Inegration Kit, neverthless we have the error described before.
So we suspect there is something to do with BO licenses, but it's not clear what..
regards

Error Connecting to SAP server via JCO

Hi,
When i tried to connect SAP server using JCO its giving error "Fatal error User name or password incorrect" .But with the same username and password i'm able to login to the SAP system with SAP logon pad. My username contains only numeric,does this have any significance?
Thanks,
Bala

Bala
type of username is not significant if it is correctly entered as same as entered in SAP Logon Tool.
U should configure the JCO Interface properly with connection details
SAP Server
SAP Client
SAP System Number
SAP User Name
SAP Password
Execution - True
Also every fields are very case sensitive, so hv deep look at every field with correction.
Pls tell me the LastErrorMessage using Tracer as follows SAPJCOInterface_0.LastErrorMessage
Regards
Som

Getting Logon Failed error connecting to SAP R/3 with Crystal

I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin Scheeler

Hi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort

Unable to connect to SAP gateway to RFC server failed(hostname unknow)

Hi All,
I am trying to create a new Model(to connect to SAP R/3 server) using the following steps:
1.Selecting Import Adaptive RFC Model
2.Entering Model name,package,default logical system names
3.Selecting the single server option and giving the details of the SAP R/3 server.
When I try to connect it gives me the following error :
-Connect from SAP gateway to RFC server failed.
Also it mentions :
<b>"ERROR hostname 'sapR3' unknown "</b>
Where <b>sapR3</b> is the entry corresponding to the IP address in the host file.
Further I am able to establish a telnet session using the same hostname in command prompt.
I have searched the Internet for solutions, but I haven't found any yet.Any ideas?
Regards,
Kshitij Agrawal

Hi,
Please check if the hostname that you specify in the "Reimport Model" GUI of NWDS matches with the application server name specified in your R/3 system.The same can be verified by following three simple steps:
1) Open the SAP LogOn.
2) Choose the server to which you wanted to connect and right click on it to get the "properties" in the context menu.
3) Look for the value entered in the field "Application Server" in the properties window.
Hope this helps.

Error when loading templates on connection to SAP-BPC

Dear Experts,
I have a user who has a error when connecting to SAP-BPC. The error message this user gets is:
bold"AUTOMATION ERROR: an attempt was made to load a program with an incorrect format"bold
Do you have any idea on how to solve this problem?
Thank you very much for your help.
Kind regards,
Chanthy CHONGKAM

Hi,
We already tried to connect with the user login on another computer and it worked correctly.
We also reinstalled Excel and SAP-BPC but with no sucess. The same error message appears.
Kind regards,
Chanthy

SAP NetWeaver CE 7.2 Installation error in Deploying java component phase

Dear Experts,
                    I am installing CE7.2 but i am getting error in 37th phase (DEPLOY JAVA COMPONENT). Error message as
An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2
> Installation Options > Application Server Java > Standard System > Standard System(
Last error reported by the step :Execution of Deploy Controller Runner tool '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/sapjvm/sapjvm_6/bin/java -
classpath /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jce.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jsse.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_smime.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_ssl.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/w3c_http.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar:
/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib/tc~je~cl_deploy.jar
-Xmx256m -Ddc.api.verbose=false
com.sap.engine.services.dc.api.cmd.Runner
deploy -l /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/deploy.lst -e stop -u lower
-w safety --lcm bulk -t 14400000 --host sapnce --port 50004' aborts with return code 104.
Error message is 'undefinedStatus:InitialDescription:. SOLUTION: Check 'undefined' and '' for more information.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/.*
J2EE is running but I checked the cat /home/ce1adm/JdbcCon.log message as ,
Start: Sun Sep 26 02:23:40 IST 2010
                    OK: connected to CE1 on jdbc/pool/CE1
                    OK: disconnected
                    Stop: Sun Sep 26 02:23:42 IST 2010*
                    sapnce:ce1adm 16>
                          Then I had checked the R3 trans and log file is
4 ETW000                                                                                32 0.117400
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'                         26 0.117426
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 1017                                     21 0.117447
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con=0, rc=1017)                                        21 0.117468
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 1017                                    84 0.117552
4 ETW000 [dev trc     ,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                30 0.117582
4 ETW000 [dev trc     ,00000]     DbSlConnect(con=-1) -> orc=0, 99=DBSL_ERR_DB                           23 0.117605
4 ETW000 [dblink      ,00000] ***LOG BY2=>sql error 1017   performing CON                               93 0.117698
4 ETW000 [dblink      ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied            24 0.117722
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'CE1'"
                    Please help me in this I strucked in this step for last 1 day.
Regards,
Sampath
Edited by: Matt on Sep 28, 2010 8:54 AM - changed formatting for readability

Sorry friends, this thread was already answered and closed by some one I have open a new Thread for my issue.
Hi All,
I am facing similar issue , My error also similar , Here is the summery of the error, Please help I got stuck very badly here past 2 days....I have 250 GB free space in the directory were usr/sap directory.
An error occurred while processing option SAP NetWeaver 7.3 Developer Edition > Install > Custom Server Installation( Last error reported by the step: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib/tc~je~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.
Thanks
Naveen

Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas Budrys

Dear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas

Error " Could not connect to SAP R/3 system"

HI:
We have been having some problems with our portal lately and most recently the error that we get is "Could not Connect to SAP R/3 "
The system landscape settings have not been changed.
Thanks for your responses.
Rachel

When I log into the portal and launch the MSS iviews I get the error ( Could not Connect to SAP R/3).
Similarly when I launch ESS I get the following error:
I see that it is lost connection with our SAP R/3 HR system. And system parameters that are available now
are just SAP BW, SEM and CRM..
So looks like we need to re-establish the connection..(?)
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
System 'pcd:portal_content/wwy.KeyStone/com.nrx.pct.vip.systems.sapr3' alias 'SAP_R3_HumanResources' not found. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
Parameter Dump
ApplicationParameter
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
DebugMode false
DebugMode.default false
DebugMode.type select[false,true]
ExportParameters Authentication, LogonUser, RequestMethod
ForcedRequestLanguage
IAC PP_MY_Profilematchup
MandatoryParameters System, IAC
NavPathUpdate false
NextLayer IAC/ConnectionLayer
OptionalParameters ApplicationParameter, DebugMode
SSO2Template
System SAP_R3_HumanResources
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TopLayer IAC/SSOLayer
UserMappingTemplate login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
X509Template
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
MandatoryParameters
System   SAP_BW SAP_BW_Q22 SAP_BW_SAND SAP_CRM SAP_CRM_SAND SAP_SEM
Internet Application Component (IAC)
OptionalParameters
Application Parameters
DebugMode No Yes

Error While connecting to SAP R3 from crystal reports

Hi Experts,
I am trying to connect to a SAP R3 from crystal reports, it gives below mentioned error.
Logon failed.
Details: CMALLC: rc= 27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.11.12.13, GWSERV=SAPGW12, SYSNR= 12
Location SAP-gateway on host xyz/sapgw12
Error timeout during allocate
TIME Wed Nov 18..
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1872
Detail no connect of TP sapdb12 from host 10.11.12.13 after 20 sec
COUNTER 6
Please help me to solve this error.
Regards,
Ganesh

Hi
please ask your network admins if there is a firewall between your CR Designer installation and your SAP R/3 system.
I assume that you have imported the necessary trsansports in your SAP R/3 system.
Which kind of driver do you use for the connection to SAP R/3?
Regards,
Stratos

Sol Man 4.0 Installation Error ECJS-30196 Connect to SAP gateway failed

Hi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION    CPIC (TCP/IP) on local host with UnicodeERROR       partner 'solman:sapgw23' not reachedTIME        Mon Aug 13 17:44:59 2007RELEASE     700COMPONENT   NI (network interface)VERSION     38RC          -10MODULE      nixxi.cppLINE        2770DETAIL      NiPConnect2SYSTEM CALL connectERRNO       10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER     1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       timeout occured
TIME        Mon Aug 13 17:17:35 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -5
MODULE      gwxx.c
LINE        480
DETAIL      timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER     1
Any suggestions/ideas for this error
Regards
Rahul

Hi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION    CPIC (TCP/IP) on local host with UnicodeERROR       partner 'solman:sapgw23' not reachedTIME        Mon Aug 13 17:44:59 2007RELEASE     700COMPONENT   NI (network interface)VERSION     38RC          -10MODULE      nixxi.cppLINE        2770DETAIL      NiPConnect2SYSTEM CALL connectERRNO       10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER     1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       timeout occured
TIME        Mon Aug 13 17:17:35 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -5
MODULE      gwxx.c
LINE        480
DETAIL      timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER     1
Any suggestions/ideas for this error
Regards
Rahul

Error when connect to SAP with JCo Connector on linux

Dear all,
Please, i need help. i was tray to connect to SAP with SAP JCo on linux ubuntu, but i have an error.
this is the error :
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM GWHOST=myhost, GWSERV=sapgw00, ASHOST=myhost, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       hostname 'avatar-bumi' unknown
TIME        Thu Feb 14 15:25:48 2008
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -2
MODULE      niuxi_mt.c
LINE        388
DETAIL      NiPGetHostByName2: hostname 'avatar-bumi' not found
SYSTEM CALL gethostbyname_r
ERRNO       110
ERRNO TEXT Connection timed out
COUNT
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1125)
        at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
        at sapjco.Main.main(Main.java:34)
Exception in thread "main" com.sap.mw.jco.JCO$Exception: (121) JCO_ERROR_NULL_HANDLE: Invalid rfc_handle = NULL encountered
        at com.sap.mw.jco.rfc.MiddlewareRFC.nativeGetAttributes(Native Method)
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.getAttributes(MiddlewareRFC.java:1233)
        at com.sap.mw.jco.JCO$Client.getAttributesInternal(JCO.java:2940)
        at com.sap.mw.jco.JCO$Client.getAttributes(JCO.java:2994)
        at sapjco.Main.main(Main.java:38)
How to resolve this error....
Regards,
Lisa
Edited by: Lisa Yanti on Feb 14, 2008 9:35 AM

I was resolve this error by my self.
We can handle this error with registering our current IP and host name on /etc/hosts.
example:
content of /etc/hosts:
127.0.0.1 localhost
127.0.1.1 myhost.workgroup
The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
added the ip and host name to be like this configuration
127.0.0.1 localhost
127.0.1.1 myhost.workgroup
172.20.17.74 myhost
The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

Connect to SAP gateway failed - internal error

Hi, I've developed a simple .NET application that connects to a SAP system and makes a function call using a SAP Connector Proxy object. Everything works fine in my workstation, but deployment doesn't. I'm also deploying the following libraries: SAP.Connector.dll, SAP.Connector.Rfc.dll and librfc32.dll.
The fact is that deployment works fine in some servers, but not in others. I've checked that .NET Framework is installed (both versions, 1.1 and 2.0). I've checked the "WINDOWS\system32\drivers\etc\services" file. What else should I check? Any idea? Every suggestion would be appreciated.
The error message is the following:
Connect to SAP gateway failed Connect_PM GWHOST=xxx.xxx.xxx.xxx, GWSERV=sapgw00, ASHOST=xxx.xxx.xxx.xxx, SYSNR=00 LOCATION CPIC (TCP/IP) on local host ERROR internal error TIME Mon Nov 13 16:23:08 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -1 COUNTER 1
And the connection string:
CLIENT=100 USER=****** PASSWD=****** LANG=EN ASHOST=xxx.xxx.xxx.xxx SYSNR=0
Thanks in advance

Hi Daniel,
Can you connect to the particular system by using SAPGUI ?
if yes, then your librfc32 file is working fine.
NCo internally consumes it's functions.
Other points to check are
1> service name as appears from within the r/3 system [transaction : smgw]
2> NCo 2.0 uses .net 1.1 & nCo 2.5 uses .net 2.0, do you have both versions running parallely ?
3> gateway errors are infrastructure issues, please verify your firewall settings for the relevant protocols : http / https & also sap ports 3300 onwards.
the services file you have checked will list the ports that need to be opened on the firewall [in the case of multi - domain applications]
4> check in your 'hosts' file [same directory as your 'services' file]
This file contains the mappings of IP addresses to host names. Each
entry should be kept on an individual line. The IP address should
be placed in the first column followed by the corresponding host name.
The IP address and the host name should be separated by at least one
space.
Additionally, comments (such as these) may be inserted on individual
lines or following the machine name denoted by a '#' symbol.
For example:
102.54.94.97 rhino.acme.com # source server
38.25.63.10 x.acme.com # x client host
with respect,
amit

BPC 7.0 error connect to SAP Component

Similar Messages

Maybe you are looking for