BPC 7.0 SP6 Client - ActiveX Error

Hi Experts,
After installing BPC for Office in a Client. when I Login in Excel appears "Active X Can not create an object" and the dimensions members are not downloaded.
Regards

Hi Pablo,
Then the problem is with the Active X settings. I would request you ro re-visit the active x settings in the system.
In addition, check the below as well.
1. Copy x:\bpc\websrvr\web\<installation directory>\xceedzip.dll from the application server to your client machines in x:\program files\bpc;
2. Unregister it and re-register it, using resp. regsvr32 -u "x:\Program files\BPC\XCeedzip.dll" and regsvr32 "x:\Program files\BPC\XCeedZip.dll" at DOS commmand prompt;
3. Copy x:\bpc\websrvr\web\<installation directory>\xceedzip.dll from the appserver to x:\bpc\websrvr\bin;
4. Unregister it and re-register it, using resp. regsvr32 -u "x:\bpc\websrvr\bin\XCeedZip.dll" and regsvr32 "x:\bpc\websrvr\bin\XCeedZip.dll" at DOS commmand prompt;
5. Finally, from the Administration Console, on the Application Set node, click Refresh client-side dimensfion files;
Hope it helps.

Similar Messages

BPC 7.0 NW Client Install Error

Hi Expert:
Now I met some problem in install BPC 7.0 NW Client.
At the first time, I ask me to provide the XceedZip.dll, however I do not have. So I just cancel the install process.
Then, I download the lastest version XceedZip.dll and put it into the corresponding folder.
At the second time, I told me "OSoftDMClientTools.DMTools found in registy.Please refer to administrator before install". I think this is caused by cancelling the install process.
How should I do to solve this problem?
Thank you
Regards,
Louis Lu

Hi,
one way is to manually delete the key in registry. Open the registry table by click start, run then type u201Cregeditu201D
In the menu Edit, click find then type u201Cosoftaddinu201D
Then you can delete those keys.
Then it should be possible to do the client installation again.
regards,
Sreedhar

Proactive caching Error while installing BPC 7.0 SP6

All,
We are installing BPC 7.0 sp 6 on Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86) Jul 9 2008 14:43:34 Copyright (c) 1988-2008 Microsoft Corporation Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2)
In short SQL 2008 Standard Edition. Will BPC 7.0 work with it?
We tried to install the BPC and recived the "Proactive caching" errors. I know we will need this feature for ROLAP.
Can we keep Standard Edition and make it work? Or we will need EE of SQL for BPC to work?
Thanks for your help.
Sam
Edited by: Sam Patel on Mar 24, 2010 10:05 AM

SQL Server EE is required for all SAP BPC Microsoft versions.
BPC is using functionalities from SSAS delivery just with EE.
Proactive caching is one the features available just into EE not into SE. But are also other features used by BPC from SSAS which can be found just into EE.
It is true that actually just for SSAS we require EE, for all other componetnts we don't really need EE.
So the installation will work, but of course you will have some limitations coming from Microsoft.
For example SQL Server SE is able to handle maximum 4 processors.
RS can not be installed into Web farm if you are using SE
And many others.
I hope this will help you to have a bteer view about what is reguired and why.
Regards
Sorin Radulescu
Edited by: Sorin Radulescu on Mar 25, 2010 2:39 PM

BPC 7.5 SP6 Backup & Restore of AppSet

Hi - We are currently on BPC 7.5 SP6 and I'm trying to do a backup of an app set from production and restore it to dev. The backup and restore seems to work fine. I don't get any errors and I can see the data on back-end.
But, when I open a template from the restored version in dev and do an expand, no data is brought back. I'm using transaction UJBR, selecting Execute Restore, in Foreground, using the same app set name as production, restoring metadata, master data and transaction data. I also selected to use tech names from backup files.
Any help would be appreciated. Thanks!

Hi ,
After Back up Appset Restore Did you process your dimensions, and also by doing refresh dimension members and then create sample EVDRE report to see if new data is reflecting.
You can also look in to PC_NW client logs if any error occurs there and check in UJA_datachecker see if find any info.
Thanks,
Kiran

Analyzer Security for SAP BPC 7.5 SP6

Hi ,
We have recently installed Analyzer add-in on our excel for Adhoc reporting on SAP BPC 7.5 SP6
But analyzer is not considering the data security restricted for specific region.
For eg: If a planner is assinged to EUROPE planning role and when he creates reports using analyzer he is able to see the data for all the regions(NA,EMEA,ASIAPAC).
Is there anyway we can restrict the planners to see the data relevant to their role in Analyzer.
we had a look at security in Admin client. Is there anyway to handle this.Thanks much.
Regards,
Sanjeev

Hi,
You can use Bex analyzer for detailed reporting. Both the analyzer and BPC reports can be connected using the normal excel functionalities (in a single excel workbook) so that BPC CV selection will be fed into Bex as variables and relevant data records are displayed in Bex reports. Performance of Bex analyzer is slow. That is one of the main reason it was replaced with BO reporting tools.
If you are using BPC 7.5NW, then there is a standard functionality called DRILL THROUGH. Using this functionality you can drill down to detailed data in BW.
Bex and BPC have different authorizations. You can maintain authorizations in BW roles and try to manually replicate same authorizations in BPC (there is also a how-to doc on automating this synchronization).

EVDRE Access Issue Post Upgrade from BPC 5.1 SP3 to BPC 7.0 SP6

Greetings,
Recently upgraded from BPC 5.1SP3 to BPC 7.0 SP6. Experiencing some strange behavior regarding the ability to send data to BPC from an EVDRE. Both users are part of the same secuity team, thus have the same security in both versions. However, one is able to send data to BPC 7.0 SP6 for a specific input template while the other recieves a message "There is no data to refresh."    This message is not encountered in BPC 5.1 SP3.
The strange thing is that the user who receives the "there is no data to refresh" is able to rebuild the input template ad hoc and send data to BPC
I have reviewed security, cleared the cache on the user's machine. I had the user with this issue log onto the app server; she encountered the same behavior regarding this template. Also tested a seperate input template in another application, this issue did not occurr.
Any ideas would be greatly appreciated.
Regards,
Greg Lakin

Hi, n
   From your description it looks like the problem si more related to that specific user. Please try to reprocess the security for that user. Then go on file server and go into <appset>/<application>/<private publication>/<user name> and delete appinfo.zip.
   Other idea can be related to the excel cache, but I don;t know why is not working for this specific user. You can try to save it in a new template as Patrick indicated.
You can try also clear local application information from admin client or try from other machine using the same client.
Hope this can hekp you,
Mihaela

SAP BPC 10.0 Web Client Blank Screen after login

Hi ALL,
We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
If you have the same issue, kindly share..
Thanks and regards,
Hery

Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
Thanks and regards,
Hery

429 ActiveX error on Control Tables

Hi,
We just migrated on application into a different FDQM enviromnet. In the workbench, when we open control tables, we get a 429 ActiveX error. Any help will be appreciated..

This error normally pops up if the target client (HFM/Enterprise) is not installed on the WorkBench server or PC.
Also it could be that you don't have a machine profile for the pc/server you're running WorkBench on.

Client Authentication error while invoking portal web service.

Hi All,
I have created a java portal web service from portal service using NWDS, I am getting client authentication error while invoking the service.
Please tell me where to enter client authenticity details.
regards
Santosh

hi,
check whether you have the UME permissions for accessing this webservice.
Rdgs,
Guru

Excel ActiveX error in exe: library not registered

Hi,
I wondered if any of you can help me as I'm at a bit of a
loss. I have an application that is complied to exe, and installed with
an installer in LabVIEW 8.5.1 that uses the Excel ActiveX interface to
write to an xls file. In development and on all of my testing this
seems to work fine (with Excel 03 and 07) but I have just received a
bug report whereby on a particular install the following error has been
thrown form my Open Excel VI (see attached code). Apparently it was
working but this machine has recently upgraded some data management
software (Goldmine 6.0 -> 7.5) and since then it hasn't worked. The error generated is:
Error code:-2147319779
source: "Library not registered."
Troubleshooting
is complicated a little as this is running as an exe and the source
code seems to work fine on my development machine.
Any ideas would be GREATLY appriciated!
(my current inclination is to ask the customer to resintall Office and
Goldmine and then reinstall the LabVIEW app - so far he has only tried
reinstalling the LabVIEW software)
Shaun
(this message is also posted on Lavag.org = http://forums.lavag.org/Excel-ActiveX-error-in-exe-library-not-registered-t11912.html)
Attachments:
Open Excel.vi.png ‏52 KB

It would really help to see the relevant code, and to know which version of LabVIEW is being used. I notice the original code was developed on LabVIEW 8.5, and the Poster mentions older versions of Office (and is writing an .xls instead of an .xlsx file), suggesting the original code is about 7 years old.
About 4 years ago, I got frustrated with trying to use ActiveX, and NI developed a much more robust Report Generation Toolkit. I've adopted the RGT and haven't looked back. Most of the weird errors I used to fight are gone, and building executables is (mostly) no pain (there's a small glitch that required manual OK-type intervention when you first encounter the Toolkit in a Build). I'm guessing that it should be pretty easy to rewrite your code using the RGT in place of ActiveX, and I'm willing to help ...
Bob Schor

Flash 9 ActiveX error

Since installing Flash 9 I am having a problem that seems to
be ActiveX related. In Firefox, whenever I go to a page with Flash
I get an ActiveX error box telling me: "Could not create control
{00000000-0000-0000-0000-000000000000}. Check that it has been
installed on your computer and that this page correctly references
it." When I click on OK in the message box, the page finishes
loading and seems to run fine. In IE, I usually just get a crash
and the browser is forced to close. I really doubt that any control
would have a name containing all zeros!!! What in the world
happened here? Any ideas?

Hey the cleanup method didn't work.
However, i could get the latest flash installed without the package, for some reason it keeps failing with the package. Version 11.8 and under installs with the package.
I know the package works because we've used the same package for thousands of other machines and they've worked.
This is an interestin issue

Unable to install Adobe Flash Player 11 ActiveX -- Error 1722

Hi,
I am unable to install Flash Player 11.5.502.149 on Windows 8. The error reported is:
Adobe Flash Player 11 ActiveX -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Nick\AppData\Local\Temp\InstallAX_11_5_502_146.exe, command: -install -msi
We have tried running uninstall_flash_player.exe to try and clean things up but this still fails. Is there a known problem with installing Flash player ActiveX on Windows 8? Flash player Plugin works fine just the ActiveX version which does not.
Thanks,
Nick

Flash Player on IE10 for Windows 8 is delivered by Microsoft; use Windows Update to obtain the latest Flash Player version.

BO 4.0 Web Intelligence Rich Client Login Error

Hi Everyone,
i have an error about log on rich client in BO 4.0 .
Error is "Logon failure due to internal error".
i can use rich client in server machine, but i try to use in client that error raised.
i search forum and internet, some of people encounter this problem suggest some answers. but any suggestion does not resolve my problem.
i tried to delete .lis files, and change default folder.
do you suggest anything about this error?
by the way network port is open (6400,6410)

Hi All,
I resolve WebI error.
there are *.lsi files in My Documents\My SAP BusinessObjects Documents\LocData normally. these files are created by BO System when you log in firstly - i guess. if you create those files manually, you can grante log in with WebI. i do not know these file's contents. i have this files ex server and use them, after edited.
but ı cannot resolve designer problem. I search internet and tried almost every solution which suggested.
by the way, our system is BO 4.0 sp2 patch6 and server machine is;
Windows 2008 Server R2
16 GB RAM,
3.7 Ghz Processor

JCRMI Client Application - error on launching

Hi, all!
I have compiled JCRMI Client without errors, but during launching within Eclipse the message appears :
"Could not resolve classpath container:
com.ibm.bluez.jcop.eclipse.containers.cardconfig"
What does it mean? How can I recover the error?
Advice me, please.
Best Regards!

I have seen this before, but I have no idea what the cause is. The person that was having the problem later reported that reinstalling the jcop toolset helped. Otherwise I don't have any good suggestions.

Adobe Flash Player 10 ActiveX -- Error 2753. The File 'InstallAX.exe' is not marked for installation

Adobe Flash GPO Deploy error “InstallAx.exe” Flash won’t uninstall
correctly from a GPO deployment
Error message from EventViewer: Product: Adobe Flash Player 10
ActiveX -- Error 2753.The File 'InstallAX.exe' is not marked for
installation.
I am running Windows 7 and I am trying to uninstall Adobe Flash
Player 10 ActiveX yet I can't find it on the list of Add/Remove
Programs. I have cleaned the registry with CCLEANER application. I
also followed instructions for removing the registry keys of the
following website
http://faultbucket.ca/2010/12/adobe-flash-gpo-deploy-error-installax-exe and still nothing.
I am stuck and I don't know how to remove Adobe Flash Player 10
ActiveX from my computer. Can anyone help me Much Appreciated!

We had this same problem recently and the faultbucket link pointed me in the right direction however the registry entries were different for us.
Most of our computers were fine but some had problems with Flash Plugins and some with Activex and some both.
The best way to fix a computer or set of computers is to first uninstall all Flash and then note all remaining Flash entries in HKEY_CLASSES_ROOT\Installer\Products.
These entries can vary based on what versions got corrupted on your systems.
This ended up being the fix for us for both Flash Plugin and ActiveX version. We tested it and had great success as a .reg file and are now deploying it via GPO.
(We had 4 defunct registry entries for Flash plugin and 3 for Activex)
Windows Registry Editor Version 5.00
[-HKEY_CLASSES_ROOT\Installer\Products\371245C90F69D5349AC564C8AA7CE50A]
[-HKEY_CLASSES_ROOT\Installer\Products\6205276E056AC94498B76D7B5AEE0A85]
[-HKEY_CLASSES_ROOT\Installer\Products\6F8CE5C1F5C5F12458EB19B9D5C0DAC4]
[-HKEY_CLASSES_ROOT\Installer\Products\FB0D7F53BA803E244A30FA7927CA12A6]
[-HKEY_CLASSES_ROOT\Installer\Products\30D9D84132D5F4D45B0DAB06034CD5FC]
[-HKEY_CLASSES_ROOT\Installer\Products\C460100B160DEAB4091314A638D85563]
[-HKEY_CLASSES_ROOT\Installer\Products\4E867BFF724E3554CB631AF1E5269AD4]
(if you copy and paste this fix remove the spaces near the end of the line added by these forums for some reason)
Reply if this solution or a similar one works for you.

BPC 7.0 SP6 Client - ActiveX Error

Similar Messages

Maybe you are looking for