BPC 7.5 Custom Process Chain - Error Found In BPC

Hi,
I have created a custom process chain to run a BADI(Not Default) to process Actual data.
In the process chain, I have just two steps:
Start process and
Run Logic
In run logc, I have following parameters.
SUSER:     Blank
SELECTION:         Blank
SAPPSET:     ASA_APPS
SAPP:     HR
LOGICFILENAME:     PRE_BUD.LGF
I have linked to DMP and when I run the process chain, I have this error: "Error Found in BPC". I have debugged the BADI code and the code seems to be working fine. It appears that we need another step to pass the control back to BPC. Is step process type "Clear BPC tables" mandatory?
I do not need any other dynamic parameters at the moment. Do I need to give any more parameters to get this working without any errors?
Your early reponse is much appreciated.
Regards,
Venkata

Hi Nilanjan,
I have done like you have suggested.
It is working as expected but when you view status, it is ending with following error :
Error Found in BPC
Application : HR Package Status: Error
Interestingly, it is executing BADI and results in the cube.are good.
Now the parameters in run logic are:
TAB Blank
SUSER     Blank
SELECTION        Blank
SAPPSET     ASA_APPS
SAPP     HR
REPLACEPARAM Blank
MEMBERSELECTION Blank
LOGICFILENAME     PRE_BUD.LGF
EQU     Blank
I did not give any parameters in Modify dynamically process type.
Do I need to give any more parameters to avoid the error?
Any way to make the package status completed would be good.
Regards,
Venkata

Similar Messages

Problems with BPC Export Transaction Data process chain

Hi everybody,
we are trying to implement the procedure "How to Export BPC Transaction Data using a custom process chain " for SAP BPC NW 7.0 and everything seems fine. However, when we execute it from Excel, the package apparently runs well (the message 'IMMEDIATE RUN: The package is running...' appears) but when we go to the watch the package status, the package does not appear in the list and there is not any file exported.
When we go to watch the log of the process chain from NW, the Modify Dynamically step runs wrongly but there is no clue of what could be done to solve it. We have done it again from scratch but we always have the same error.
Any idea out there?
Thanks in advance. Kind regards,
Albert

Hi Rich,
in the end we managed to export data. Our NW administrator created the custom process type wrongly - putting a blank space before ZBPCTXEXP - and now it has been corrected and everything works fine.
Well we have managed to transport applications to one server to another one and to export/import the transactional data.
Is there any doc that explains how to transport process chains from one server to another?
In BPC Opps manual there is not too much information and we should transport quiet a lot of process chains related with Runlogic issues .
Thanks a lot for your help.
Kind regards,
Albert Mas.

Process chains:Errors Occured..

i have selected my info objects 0CRM_PROD in rsa1 and i entered CALL MONITOR FOR BI OBJECT and then i got a monitor screen in that succesfull(42) it says...in that i have selected 0PRODUCT > TODAY DATE>
I FOUND THAT CR1 LIENT 100
02:04:56 (4 From 4 Records)i entered twise on this and i got HEADER STATUS DETAILS tabs...
in above DETAILS tab
we got a red colour in
Process chains : Error Occured
MD : Business partner & Product
like this... can u please suggest me the resolution for this...
please help me in this regard , thanks

Hi -
Please check
1) Do you have any Red request
2) Did you run delta twice
Regards
Astoria

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

Process chains errors

Hi,
Any one can plz send the process chain errors in BI.I am in support so plz give some process chain errors.
sekhar.
Bye.

Hello Sekhar,
Please find the links might be it can help you..
Re: Process chain error for infopackage
process chains errors
http://help.sap.com/saphelp_nw70/helpdata/en/d3/53e03b8235953ee10000000a114084/content.htm
Please search in SDN you find more help..
Thanks,
Geeta

What are the varoius type of process chain errors how we can solve them.

Hi,
I need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible please provide me any document also so that i can solve my
abnormal problems for process chain errors.
Thanks in advance .

Hi,
1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
For more errors and solutions go thorugh the link below
http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
Regards,
Marasa.

What are some of the process chain errors one comes across?

hi friends
What are some of the process chain errors one comes across?

Hello Kiran,
Here are some of the errors that come across...
-> Rollup not possible, no filled aggregates available
-> Error when starting the extraction program
-> The process step locked by another changerun
-> Info objet does not contain alpha confirming values
-> Errors due to non activated objects
-> Errors due to duplicate records
-> Errors due to locking
-> Problems because of connection problem between source and bw systems
-> Problems due to RFC
Hope this helps you
Cheers
SRS

Common Process chain errors

Hi friends,
Can u please explain cause of below errors in process chain and how to rectify the problem ?
1. Deadlock error.
2. Error in unit conversion
3.Error 1 in update
4.Processing no data
5.Caller 70 missing
6.Idoc not processed completely.
Thanks...
Bala

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
\Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
Thanks

Running a custom process chain from BPC

Hi,
I have created a process chain in BW to load masterdata from a BW infoobject to a BPC infoobject. Is it possible to run this process chain using the data manager in BPC ? Do I have to add any BPC process types to the chain in order to make it work ?
Thanks in advance ...

There is no 'official' documentaton available. What I stated before is just the results of communcation with our SAP Executives ... ramp-up will start on begin december, release expected around end Q2 2010 (depending on ramp-up projects). About content of new functionality: to be expected:
- better integration BW: DM package for loading of master data from BW, multiple selection options in transformationfile, business process flows and drill though.
as I said, to be expected, since not official yet ...
hope this answers your question
D

Abap Program in Process chain error

Hi Experts,
In my process chain there is a program to download hierarchy data and then in next step it would
load data but when the process comes to this program the job is getting cancelled and log shows below msg
Process LOADING, variant ZPAK_123455 is not scheduled waiting for event RSPROCESS 123444444
Please advice
Thanks
Raga

Hi.........
Remove your process chain from scheduling using the option procesc chain --> Remove from schedule. Then check & activate the process chain. Save the process chain. Check & activate again and then schedule the process chain.
Not 100% sure of the cause. When we faced a similar issue, we tried to analyse the cause and found that this kind of error occurs when the process chain is descheduled by deleting the released background job & scheduled again.... and this is because some of the old jobs for some of the steps are not deleted & the links between the steps wait for the old jobs or events.
I would say it is always better to deschedule a chain using the 'Remove chain from schedule' option than deleting the background job.
Hope this helps you.........
Regards,
Debjani........

Process chains not delivered in BPC 7.5 NW SP4 Version

Hi Experts,
We have installed BPC 7.5 NW SP04 sandbox system and we found that
there are two process chains
(/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) not delivered with
BPC NW 7.5 NW versino which are used for BW Master data imports.
Please suggest.
thanks
Venkata

Hi,
To acitvate BI Business content follow as below:
Login into Backend system (BW) and run tcode SE38> Enter program name as UJS_ACTIVATE_CONTENT>Execute
Choose AppsetID uncheck all check boxes except Activate BI Business Content and Run (F8).
Hope it works..
regards,
Raju

Process chains: error when including CVC generation process type

hello all !
I have a Pc that loads data from custom extractor into a Icube.
next triggers Generate Characteristic combination which never executes. Status remains active but no "completed succesfully" (yellow triangle) in monitor of pc.
When I run it alone the CVC generation process types executes OK...??!!!
My sequence is Delete Index from cube ---> Load IP --> Atribute change run ---> Create Index --> Delete overlapping request (up to hear loads oK although status never becomes green '??)
final step is a CVC generation + adjust time series process type.
Does any of you know why the error ? and how to help solving it out ?
appreciate all yur comments

Hi Samir,
I guess you can directly go to RSA1->Source Systems.Rt click and Transfer Global Settings then Delete the Red Request and Go to the Particular Process chain and do a Repeat/Repair.
You can try repairing it...
Rest of your question is not clear.... Give me ur number, will call you, then we will discuss
Rgrds,
Habeeb

DSO cannot be activated when process chain is launched from BPC

Hello,
we are facing the following issue in our project: we have created a process chain that loads transactional data into a DSO and then a BW cube. From there we will be launching the data into BPC.
The process chain that we have built is working and loading OK when this chain is launched from the RSPC trx. However, when launched via the datapakage "Execute Process Chain in BW" data are loading OK from the source system up to the DSO, but the activation does not take place.
The error that we are getting on the BPC data package is:"An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occurred, but was neither handled locally, nor declared in a RAISING clause
Call of the method IF_RSPC_GET_PARALLELIZATION is SINCHRONOUS of the class CL_RSPC_CHAIN failed; the obligatory parameter I_VARIANT has not been filled."
Has anyone faced this issue before? could you please help on this topic? I have tried several options and all of them are pointing to the parameter I_VARIANT.
Thanks in advance.
Kind regards,
Begonia

Hi Reddy,
I've deleted deltas load from DOS, then I launched and activated a repair full load from ECC, it worked well.
After that I went for delta load so the load was OK but the activation failed.
The message 'Type of data update' was: Repeat of the last delta and the Nº of Transferred and Added was zero.
¿Do you think I could solve the problem if I do a repair full load from ECC then I delete the Delta init and create a new Delta init?
Any another idea?
In conclusion I'm not yet solved the problem so advices are welcome.
Regards,
Jorge

Process chain error RSPC009

hi,
i am running PC and in the MD upload stage all the process stops and does not continue to the other stages in the chain (the link between process is "always")
the problematic IO is 0vendor_attr and the mesage is as follow:
Process Execute InfoPackage, variant Vendor Number - 0VENDOR_ATTR has status Ended with errors (instance REQU_413284I5QHP0VXAHA67Z9699E)
Message no. RSPC009
it is extremely important to us and to our customer
thank a lot
Nir

Hi,
In the process chain if any process fails then after rectifying the error also the subsequent processes will not get trigger. so inorder to make the processes to trigger plz follow the below steps:
1.Identify the Failed Process whether it is loading or non-loading.
2. if it is non-loading then mainly the error will get bcz of locks.so goto SM12 and release the locks.And Then Refresh the chain for 1-3 minutes
3. If it is Loading process Failure then First u have to rectify the error manually. After rectifying the error in PSA u have to refresh the chain. Even then The subsequent processes will not get trigger. So execute the program RSPC_PROCESS_FINISH by giving the chainid, instance,and variant details.\
4. Reresh the chain after executing the prgrm by giving all the details. Then automatically subsequent processes will get trigger.
Thilak

Process chain error - Create Index 0SD_C04 is not permitted

Hi,
We are trying to load Infocubes 0SD_C03 and 0SD_C04 in a process chain. The Delete Index and Load Infopackage processes are executing successfully, but we are getting an error on Index creation for Infocube 0SD_C04.
The error message is "Deleting/Reconstructing Indexes for Infocube 0SD_C04 is not permitted".
Is there a setting to allow index creation for this cube?
Thanks
Pooja.

Pooja,
maybe the index was not properly dropped ,
check if the index has not got corrupted..
found a program:
RSDU_INFOCUBE_INDEXES_CHECK
this could be of help - but an unable to test it here since I cannot replicate the scenario..
Arun
Assign points if it helps..

BPC 7.5 Custom Process Chain - Error Found In BPC

Similar Messages

Maybe you are looking for