BPC 7.5 for Netweaver : Config ABAP Server

Hi Experts,
After installing BPC 7.5 SP07 add-on on a Netweaver 7.0 EhP1 SP06, I have to activate BPC content.
I did installation in mandant 000.
BW is running on mandant 100.
In which mandant should next steps be done?
1/ BPC Users creation
2/ Transaction RSTPRFC
3/ UJA_ACTIVATE_CONTENT
4/ UJA3_WRITE_SYS_USERS (to assign Windows BPC users)
Regards
Chris
Edited by: Chris DURECU on Feb 7, 2012 2:37 PM

Thanks,
which user have to launch UJS_ACTIVATE_CONTENT?
Is it BPC_SYSADMIN user or a basic system user admin?
S_RS_ALL, SAP_BW_CONTENT_ADMIN (and may be SAP_ALL) have to be assigned to BPC_SYSADMIN user or to the one that will launch UJS_ACTIVATE_CONTENT?
Regards
Chris

Similar Messages

BPC 7.5 for Netweaver : SP Stacks

Hello,
I need to install the SAP BPC 7.5 for Netweaver add-on.
The party ABAP server will be installed on a Netweaver 7.0 SP6 EhP1.
The .NET application/web server will in turn installed on a Windows 2008 server.
The last level of SP Stack available for BPC is Stack 11.
Do you have any feedback on the stability of the latest SP for BPC?
It seems that SP10 have bugs.
Which SP has the most stability?
Thank you for your feedback.
Chris

Hi Chris,
I stand to be corrected.
However, my understanding is that SP 7 for BPC is a prerequisite for compatability with NetWeaver 7.3.
SP 7 is also backwards compatable with previous versions of NetWeaver.
I have successful installed and worked on a stable environment:
BPC SP 7
NetWeaver 7.0
You may want to bear this in mind if you are planning to ramp up your NetWeaver. You may find yourself installing a previous SP for BPC only to ramp up to NetWeaver 7.3 and have to migrate your BPC SP to a later version.
Best,
Devon Abraham

BPC 7.5 for Netweaver : Upgrade SP

Hi Experts,
My co nfiguration :
BPC 7.5 for NW , SP07.
WOndowns Server 2008
I would like to Upgrade my BPC component from SP07 to the last SP.
What's the process?
After upgrading to the last SP with SPAM, do I need to UJS_ACTIVATE_CONTENT again? (with clean and delete option?)
On the windows side, I think I have to uninstall and install the new version?
Regards
Chris

Hi Chris,
It wouldn't hurt to use UJS_ACTIVATE_CONTENT to clean and then activate APSHELL after you update your BPC to the latest version.
There a few things triggered by this process like Process Chains, so if you re-create APSHELL you will ensure that it is up to date and also all the new AppSets based on it.
You might face issues with a Dimension Attribute named MBR__SEQ, if for some reason your dimensions don't have it then you may run UJA_MIGRATE_MBR_SEQ to fix it.
As you are coming from SP07 I believer there will be no issues with that.
Regarding the already existent AppSets there is no need to activate them again as far as I know.
On BPC Client you may face an issue where not all languages are available to be installed, but if you alternate between steps all languages should be displayed. This issue is present on the installer of BPC Client 7.5 SP09 up to 11.
If you don't have the AntiXssLibrary 3.1 I would recommend saving it from your current installation as it is no longer available on the Microsoft download portal. You may also follow [SAP Note 1679046|https://service.sap.com/sap/support/notes/1679046] for a workaround.
Regards,
Marcelo

RFC User for Connectivity with ABAP Server Proxy Required?

Hi people,
I am just wondering how I set-up my connectivity between XI and my business system B.
Our basis already set-up the connection to the runtime workbench from B->XI
For that sake they've added the xirwbuser to B (Xi has it as well, of course).
Now I am configuring the whole thing in the Directory. There I need an receiver agreement and a channel. For that I take the adapter type "XI". Anyway, I need to give here an RFC destination as well. I've added one of type "H".
And now the issue: Do I really need a separate user for that rfc connection? I thought with proxies the systems are somewhat like "hard-wired" and do not need special users.
Anyway, if I need a dedicated RFC user: Is a certain role enough or do I need special roles depending on the stuff I am doing in the business system?
Thanks in advance!
Helge

You can of course use an existing service user.
But for monitoring purpose it is receommended to use a seperate user. (Think about system log entries).
The user needs the role SAP_XI_APPL_SERV_USER.
Regards
Stefan

Host and domain name for http on abap server 7.4 ?

Hi, I've just setup the NW7.4 on HANA CAL system and am trying to execute some web dynpro apps but they fail as they always launch with a hostname of http://abapci.dummy.nodomain:50000.
How do I go about changing the system so that web dynpro apps will launch with the correct AWS instance external IP address..? i.e. they should launch with:
http://http://ec2-54-xxx-yyy-zzz.ap-southeast-2.compute.amazonaws.com:50000/sap/bc/webdynpro/sap/configure_application
I've been googling the options and have come across the RZ11 parameter SAPLOCALHOSTFULL but not sure if that will work or is the best way. Trying to change the url in txn SMICM doesn't work either.
Thx.

You are right, I'm also not doing this manually :-) I'm using a shell script to replace all necessary parameters. If you still want to test the updated hostname variant, you can do the following as root using ssh:
su -c "stopsap r3" -l a4hadm (stop all instances)
/etc/init.d/sapinit stop (stop all remaining services)
./updateHostname abapci dummy.nodomain yourhostname yourdomain.com (run the attached script)
/etc/init.d/sapinit start (start all services)
su -c "startsap r3" -l a4hadm (wait until HANA is up and start all instances)
Best regards,
Christopher

BPC for NetWeaver OS requirement - Windows 2003 Standard vs. Enterprise

Hello BPC Expert,
I have a question in regard to the Windows Server 2003 edition for SAP BPC 7.0 for NetWeaver. On the Installation Guide of BPC NetWeaver SP03, the prerequisite for the Operating System for .NET Server component is Windows Server 2003 Enterprise Edition.
My question: will Windows Server 2003 Standard Edition work for .NET component? We have a budget concern as the Enterprise Edition will cost couple more thousands than standard.
Thank you,
Bomo

Hi,
Yes you can use the Windows Server 2003 Standard Edition (32-bit and 64-bit). Shouldnt be a problem.
Thanks.

BPC 7.5 version for Netweaver on Windows 2008 R2

Hi all,
I am installing BPC 7.5 version for Netweaver on Windows 2008 R2 SP1.
I have completed installation and post installation steps for both ABAP and .Net components.
Now, while executing http://localhost/OSoft i am getting below mentioned error
Error Summary
HTTP Error 401.2 - Unauthorized
You are not authorized to view this page due to invalid authentication headers.
Detailed Error Information
Module IIS Web Core                                                          Requested URL http://ides3:80/OSoft
Notification AuthenticateRequest                                      Physical Path F:\PC_NW\Websrvr\web
Handler StaticFile                                                               Logon Method Not yet determined
Error Code 0x80070005                                                     Logon User Not yet determined
Most likely causes:
u2022No authentication protocol (including anonymous) is selected in IIS.
u2022Only integrated authentication is enabled, and a client browser was used that does not support integrated authentication.
u2022Integrated authentication is enabled and the request was sent through a proxy that changed the authentication headers before they reach the Web server.
u2022The Web server is not configured for anonymous access and a required authorization header was not received.
u2022The "configuration/system.webServer/authorization" configuration section may be explicitly denying the user access.
Any pointes toward solutions of this error?
Thanks.

Yes. Please check Server Manager -> Roles. Find Web Server (IIS) there (not a tree node, but on page), click "Add Role Services" and check that all Security role services are checked. If not - check, install missing role services, try .Net server, if it still doesn't work, reinstall.
Otherwise it would not work.

About AD users for installation - SAP BPC 7.5 SAP NetWeaver

Hi
This is very basic but still I need to know. I'm installing SAP Business Planning and Consolidation 7.5 for Netweaver and in the Installation Guide page 23 step 10 says:
3. Assign a single domain user to each user type
and after this appear one table with users abap and users from AD, my cuestion is this:
This AD users, what permissions need???
Thanks for your help.
Edited by: BASIS Consultor on Jan 24, 2011 10:54 PM

Hi
Thanks for your help Bruno it was very helpful.
The problem was solved thanks to the security guide page 39 we can read:
When you are adding new users from a domain to the system, you have the ability to select one of the user-defined groups, and customize it further, if required.
When setting up users on the system, take the following considerations into account:
We recommend that all users come from a single domain.
We recommend that all users have access to the domain the server is on. If they do not have direct access, the domain must be trusted between the server and user domain.
The installation user must have rights to browse the users from all user domains.
Thanks for your help.

Install License Key for SAP NetWeaver 2004s ABAP trial Edition.

Hello.
I have two installations of the SAP NetWeaver 2004s ABAP trial Edition (on desktop and laptop). After the expiration of the original 30 days license; now I need to install the extended License (90 days). I am using SLICESE transaction from SAP* user account to install the new license. I have got the "License Key" from SAP website. However, the installation of the new License Key fails to complete successfully (it fails to add the new license key) and ends with an error prompt. This problem is happening on both systems! Has anyone experienced such problem? What did you do to fix it?
Note: no errors in typing in the new Key, as I used the copy and paste!
Thank you very much for your help.
Hameed

Rich,
Thanks again for your help. I found out that if you try to install the new license key (first time) with any error (such as wrong expiration date), it will fail as "invalid key", naturally. However, the subsequent attempts also continues to fail despite the fact that the correction are made. the only way I could fix this was to stop and restart the SAP Application server and make sure that the first attempt has typos. It seems to me that once an error flag is set, it is not removed unless the server is restarted. well, the problem is fixed now and thank you for your help.
Hameed

Initial password for SAP* in SAP NetWeaver 2004s ABAP Edition

Hello,
I have just installed the SAP NetWeaver 2004s ABAP Edition on my PC and I want to setup some new clients to simulate an ALE model.
Does anyone know the initial password for SAP* ?
I have already tried PASS and pass because I know it is case -sensitive now but it did not work.
Thanks a lot.
Wim Van den Wyngaert

Hi,
initial SAP* password is 06071992
DDIC is 19920706

ABAP Server Proxy OR RFC - for attaching a file

Hello ABAP gurus,
Just to give a brief background, systems involved are ERP and PI
Certain Files (3 files to be exact) are generated in the ERP directory/file system
I need to transfer these files to PI "without" using the readily available FTP/NFS adapters (this is a limitation - no use of direct FTP is allowed)
Making the directory as a "shared" directory between ERP and PI is also not an option.
With the scenario above, I though of using an RFC or an ABAP Server Proxy to attach the said files to send them to PI
Which is the better way to do it?
I've seen a documentation for the ABAP Server Proxy that makes it possible to attach files to the proxy message, but for RFC I don't know if this is possible?
Your expert advise is highly appreciated

hI,
Use class CL_PROXY_CLIENT in the program and method IF_PROXY_CLIENT~EXECUTE.
You can refer documentation of this class as well as if you will search on any search portal using name of this class, you will get the briefe idea with the refernce procedure too.
Unfortunately I am unable to post you few links but try search on it, hopefully you will get it.
try below link.
<link to blocked site removed by moderator>
Edited by: Thomas Zloch on Oct 7, 2011 10:37 AM

ABAP Server Proxy development for creation of IDOC

Hi all,
I am working on JDBC to ABAP Server Proxy where i need to populate fields and then i need to mapp to the standard IDOC ie, SHIPMENT_CREATEFROMDATA01 which will create shipment idoc this is my requirement.Can anyone provide me the proxy development part for creation of IDOC.
Regards,
Bhoj

Hi,
Create server proxy at the receiver end and deploy it using the following links:
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
http://help.sap.com/saphelp_nw04s/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/e2bc3d9ecc6b3be10000000a114084/frameset.htm
Server proxy part1 and part2:
/people/sap.user72/blog/2005/12/08/integration-builders-through-proxy-server-part--1
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
Regards,
Vinod.

Superclass for ABAP server proxy?

Hi Experts,
I generated an ABAP server proxy by using a synchronous inbound interface of XI.
Can someone tell me which superclass does the server proxy use? I am trying to send an attachment back to XI in the proxy response but am not able to write the code of it.
Please help.
Thanks,
Shobhit

Hi Prateek,
This blog is for sending attachment in client proxy. (Sending data from ECC to XI using a trigger in ECC)
But my requirement is to send the attachment in server proxy (XI calling the ECC proxy program which returns the attachment back to XI synchronously)
For this purpose Im not able to use the code in https://weblogs.sdn.sap.com/pub/wlg/3509. [original link is broken] [original link is broken] [original link is broken]
The server prxoy does not recognize the statement
attachment_protocol ?= prxy->get_protocol(
if_wsprotocol=>attachments ).
as the superclass of this method is not accessable by this proxy interface.
HELP!!
Regards,
Shobhit

BPC cannot connect to ABAP server

Hello Experts,
I'm facing the following issue when installing SAP BPC NW 7.5 SP04
When the installation is done (succesfully) I try to login to the server manager and get following error message:
"Cannot connect to ABAP server; Check your ABAP server configuration"
In the diagnostic, it is also the SAP ABAP Server connection that fails.
I'm installing this with a domain user called BPCADMIN.
In the ABAP system I added this domain user to the UJA3_WRITE_SYS_USERS program.
When I check the table: UJA_SVR_DEFAULT I see 3 times the domain\BPCADMIN user.
In the log file I get following error:
#2.0 #2010 09 03 01:35:41:020#-7:00#Error#ServerMgrService##EPM-BPC-NW##0d55515b-753b-449a-9a0f-1d3781e38f69###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:40:49:608#-7:00#Error#ServerMgrService##EPM-BPC-NW##b22778de-4872-4138-a700-26cd9f8b0d68###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:41:11:327#-7:00#Error#ServerMgrService##EPM-BPC-NW##38dad74d-47bc-48c0-a779-dc5fd2f1ef92###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
Strange enough, a ABAP connection with SAP LOGON works...
Can you please help me on this?
Thanks!
Erwin

HI,
I checked the 3 BPC SAP ID (BPC_SYSADMIN; BPC_ADMIN; BPC_USER). They are not locked.
And all of them are communication users. I set the rules according to inst. guide.
I run the UJA3_WRITE_SYS_USERS program too.
The UJA_SVR_DEFAULT table contains these lines:
ADMIN -> BPC_ADMIN
SYSADMIN->BPC_SYSADMIN
USER->BPC_USER
I tried to login manually with these users, it is OK. (they were dialog users )
(the .Net server and the SAP BI system are not the same machines. I think this is no problem isnu2019t it ) Firewall are off on both machines.
Can I create these users at the .Net server side and login to win server with them?
I set these SAP users to BPC server .BPC_ADMIN is the BPC_ADMIN and so on. Is it OK ?
I have no idea what can be the problem.
How can I check they are BPC specified users or not?

SAP NetWeaver AS ABAP 7.1 for Mobile 7.1 Trial Version

From where can I get the SAP NetWeaver AS ABAP 7.1 which is required to run data synchronization with
NetWeaver Mobile 7.1 ?
As per the download notes, for mobile 7.1 -
"Note: SAP NetWeaver AS ABAP 7.1 is NOT part of the download package, but is integral part of the product shipment SAP NetWeaver Mobile 7.1. In order to synchronize applications that you have developed with SAP NetWeaver Mobile 7.1 Trial Version, you absolutely need to install SAP NetWeaver AS ABAP 7.1 also. Without such installation, applications you have developed with the Trial Version will only be able to run standalone on NW Mobile Client, but without data synchronization.
Does the CE version contain AS ABAP 7.1? Link to the specific download pl.

Hi,
There's no SAP NetWeaver AS ABAP 7.1 trial version available on SDN. The CE trial version only contains the Java AS.

BPC 7.5 for Netweaver : Config ABAP Server

Similar Messages

Maybe you are looking for