BPC 7.5 NW: Unexpected changes in data after changing the a/c hierarchy

Hi,
We are implementing the IFRS Starter Kit for performing an IFRS consolidation. We have data for a couple of period already in the system and would like to now extend the account code hierarchy to store disclosure items like lease committments, tax etc (these account codes have their own parent and do not impact the balance sheet and income statement hierarchy).
We have tried changing the hierarchy but as soon as the changes are implemented, the numbers in the main balance sheet and income statement are impacted, which is very surprising. In particular, the automatic adjustment rules and the FX translation have stopped working. We have run the consolidation several times but to no avail.
Has anybody come across this problem before (particularly on the NW platform)? Any help would be highly appreciated.
Many thanks.

Hi,
Further investigation is that it appears to be a currency conversion issue. When we edit the currency conversion rules to translate the additional accounts, the entire currency conversion rules stop working. The currency conversion rules are validated and no errors are being thrown by the system.
Any help would be highly appreciated.
Thank you.

Similar Messages

HT1766 How can i restore all my data after deleting the apps? can i syncing back from the macbook?

How can i restore back all my data after deleting the apps and re-install back.
After reinstall back stll retrieve all my data.
Can i syncing back the original frm my macbook since last update is Mar

Favor the route via iTunes and local storage on the computer. MUCH faster than any cloudy backup, no matter the speed of your Internet connection. No network beats the speed of a hard drive. Just make sure there's enough room on the computer before you start, must contain all that's on the iGadget.

How to change the display of Hierarchy in EVDRE

I want to change the display of the hierarchy as first child and then parent. instead of first parent then child.
I mean when i see the report, I have to see the values for the members and then node total .
How can i achieve this ??
Thanks in advance
Regards
KK

You may find the article I wrote for SAP Financials Expert online of interest since it explains this concept. The link is given below, but you must be a subscriber to view the entire article.
http://www.financialsexpertonline.com/article.cfm?session=&id=4558
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group

How to read data after using the PRINT function in visual basic

I know the benchlink can capture the spectrum analyzer screen for me, but I want to integrate it into my application. I use NI spy to detect the communications from the benchlink and put it into my application. After sending the "PRINT 0" command, my "ilrd SpectrumAnalyzer, temp, 500" command doesn't work, giving me EARG error. Does anyone knows if it is because I can not define the temp to be string or some other problem?
b.t.w, the communications I get from NI Spy actually read some unknown characters from the instrument, what kind of data it is? Any idea how to use it?
thanks.

Hello elm,
This is completely dependent on your instrument; if you are getting the data then you are halfway there. Look in your instrument's programmer's reference manual to see if they mention how the picture is encoded in bytes. There are so many different ways to encode a picture in binary that speculating and guessing would probably never yield the true result. If there is no mention in the manual, contact the instrument manufacturer.
Sorry I could not be of more help.
Scott B.
Applications Engineer
National Instruments

How to view history of data after enableing the Change Tracking

Hi All,
I have enabled the track changes using MDM Console. But now I unabled to view the last values of the fields which were updated. I also could not find any option in MDM Data Manager to view the last values of the fields. Please help me to view the track changes/history of data.
I appreciate your prompt response
Shahid Nadeem

Hi
The steps are clearly detailed in a blog by
Change Tracking in MDM
Bala Subbaiah Gorla
Business Card
Company: Wipro Limited
Posted on Sep. 08, 2006 09:40 AM in Master Data Management (MDM)
You can look at the blog or I can email you the document .
Here are some of the tips from the blog
Hope this will solve your problem.
Change Tracking is a feature in SAP MDM, Using which we can track history of table records for the repositories. There are three are options, Track Adds, is track new field value when a record added. Track Modifies, track old and new values when the field is modified. Track Deletes, tacks old-field value when a record is deleted. In addition, for each type of change you can track, the setting of the root node of the Tables and Fields hierarchy determines the default setting for new tables added to the MDM repository. Similarly, for normal tables, the setting for each table node determines the default setting for new fields added to the table. Finally, the setting for each field node determines the actual setting for the field
Step I>>Activate Change Tracking.
Navigate the Selected repository,
(your repository)>Admin>Change Tracking.
Click on Change Tracking, you will get Change Tracking Setting screen. Then choose the level of tracking root node of Table and Fields. In addition, there are three type tracking. That are Track Adds>>this option tracks new field value when a record is added, Track Modifies >> this option tracks old and new values when the field is modified, and Track Deletes >> this option tracks old field value when a record is deleted
Step III>>Logon to MS SQL Server
Start>Programs>Microsofr SQL Server-->Enterprise Manager,See the screen shot below for SQL Server logon.
You will get the SQL Server Enterprise Manager. See the screen below. Select the Database for the respective Repository (BP3_Customer_Workshop). For the each repository, there are two databases XXXX_m000 and XXXX_z000.
There are two databases CustomerWorkshop_M000 and CustomerWorkshop_Z000
Select the table A2i_CM_History under the CustomerWorkshop_Z000 and select query as below screen.
Choose/select the fields that you want execute the report/show.
You can find the record, which I (the user name 'mdmg') have edited at 9/6/2006 11:44:39, as seen below screen
Thanks
Prashanta
PS : Pls reward helpful answer

Incorrect data after activating the request through Process chain.

Dear SDN chaps.
Today morning. I encountered a strange issue in DSO..
I have DSO which is updating from the AL11(application server) flat file.
While i am loading it to PSA there were no issues and after loading it to the DSO there is no issue and its passing through the routine and the data is populating properly in NEW data Table .But after successful activation of the request through process i am getting the wrong records in active data table.
Then i deleted the request and reran it manually i mean triggered the DTP and ran the manual activation surprisingly accurate records are coming through manual process..
I am just wondering why it is not working through process chain and why it is showing incorrect records through process chain execution and how it is showing accurate records through manual uploading process..'
Could some one please help to come out from this..By the way mine is SAP BI 7 SP20 &SP05 for BW 7.01
Thanks
K M R

Hi Pra
Thanks for your response..
We are doing PSA deletion and then we are uploading the data to PSA as well as DSO.
Now the issue is not in the part of loading we are facing the issue in Actiation of request if i am executing the activation through process chain it is sucess but the values are incorrect. If i am doing the manual activation it sucess with correct data.
Even i tried with a new chain but still i am facing the issue.
Surprise thing is in new data table the data is perfect in both the ways like manual upate and Process chain update only during activation i am getting incorrect record in the active data table..
Appreciate your help on this....
Thanks
K M R
Edited by: K M R on Jul 9, 2010 11:09 AM

Displaying detail data after clicking the link in h:dataTable

Hi All,
I have following requirement.
h:dataTable displays the list of addressList like my homeAddressList workAddressList and so on. As soon as I click on one of these I need to display list of all addresses shown in this list. My problem is how to identify in the jsf bean which link was clicked.
I use hibernate for persisitense and hence directly iterate over hibernate transient domain object collection to display the list. For e.g User has AddressList
Any help. Thanks in advance.

Bind the datatable to a HtmlDataTable (or UIData) property in the bean and use HtmlDataTable#getRowData() to obtain the row object associated with the UICommand action.
Also see this article for examples (and much more): [http://balusc.blogspot.com/2006/06/using-datatables.html].

Performance Management: Changing plan end date after publishing plan.

Dear experts,
I want to change my plan end date after publishing the plan. But there is no update option when i go to HR professional > Performance Management > Performance Management Plans > Query A plan > Update.
Kindly guide me.

Change the End Date of Plan and Rebublish the Plan.
Thanks

Changing the dimension hierarchy level keys in RPD online mode caused issue

Hi,
We tried to correct the dimension hierarchy level keys and remove prefered drill path settings in the business model layer in RPD in online mode. However this caused all the reports and dashboards based off of this subject area to show incorrect, and/or restricted data. The physical query generated by the answers requests were also incorrect.
Even restarting the server and presentation services could not resolve the issue. Can someone please help us to understand what could have caused this issue?
Thanks in advance

Hi,
I am not sure why the existing reports throw an error when I change the RPD dimension hierarchy level keys. Does anyone know how I resolve this issue.
This is urgent. Any help will be most appreciated.
Thanks in advance.

Get data after truncate

hi,
how can i get back my data after truncating the table.
regards
Kiran Sankpal

Hi Kiran,
Table backup is the only way to restore data of a truncated table, it is possible to get deleted data back but not data of a truncated table. Refer Flashback
*009*

Process to change the order of the hierarchy nodes

Hi,
What is the process to change the order of the hierarchy nodes ( and associated attributes) through import manager? any pdf's or doc's regarding this?

In Import Manager it is not possible to change the order of hierarchy nodes or the order of the linked attributes.
Regards,
Ronen

How to remove data from page after submitting the page?

Hi,
I am using API to create person record.After submitting the create page the data are still
showing on that page.
How to remove data after submitting the page?
Please suggest.
Regards,
Sagarika

Abdul,
Your solution is perfect if the UIX beans on the page do not have BC4J binding with a VO attribute, otherwise, Sumit's soution is appropriate.
--Mukul

BPC Excel VBA Code to change Current View ios broken, please help

Hi,
I inherited a macro set to cycle through a list of paramenters, change current view accordingly and print the reports. It was working fine in the prior version of BPC, but stopped when we transferred to BPC 7. The code stops when it's trying to make the Current View visible (in the prior version it was an option, in BPC 7 it's always visible). I also think it does not recognize the "OutlookSoft CPM CurrentView" name. I am not a VBA expert. Woudl appreciate any ideas. The place where the code stops is in bold below.
Thank you!
Sub cmdRun_Click()
Dim strColHead As String, strRowHead As String, strDataRange As String
Dim I As Integer, j As Integer, k As Integer
Dim blnOldStatusBar As Boolean, blnOSBarStartVis As Integer, intOSBarStartPosit As Integer
Dim strPL As String, strTabName As String
Dim intTotalPrintingPages As Integer, intPageCountStart As Integer
Dim dteStartTime As Date, dteEndTime As Date, intRunTimeSeconds As Integer, intRunTimeMinutes As Integer
'Record the start time
dteStartTime = Time
'Get the current status bar setting. Then, make sure the bar is visible
blnOldStatusBar = Application.DisplayStatusBar
Application.DisplayStatusBar = True
If Test_Ranges = False Then
    Exit Sub
End If
strColHead = refColHeader.Value
strRowHead = refRowHeader.Value
strDataRange = refDataRange.Value
'Find and store the starting position for the OutlookSoft Currentview toolbar
'Then, make the entire OutlookSoft CurrentView toolbar visible
Application.StatusBar = "Storing CurrentView toolbar data"
blnOSBarStartVis = Application.CommandBars("OutlookSoft CPM CurrentView").Visible
Application.CommandBars("OutlookSoft CPM CurrentView").Visible = True
intOSBarStartPosit = Application.CommandBars("OutlookSoft CPM CurrentView").Position
Application.CommandBars("OutlookSoft CPM CurrentView").Position = 4
'Hide the form
frmParameters.Hide
'Cycle through the combinations of P&Ls and tab names
For I = 1 To Range(strRowHead).Rows.Count
    'Change the currentview P&L
    Application.StatusBar = "Changing the CurrentView..."
    strPL = Range(strRowHead).Rows(I).Columns(1).Value
    ChangeCurrentView "P_L", strPL
    'Refresh and Expand
    'Application.Calculation = xlCalculationManual                      'temporarily turn off Excel's automatic calculation
    Application.Run "MNU_eTOOLS_EXPAND"
    'Application.Calculation = xlCalculationAutomatic                   'turn the automatic calculation back on
    Application.Run "MNU_eTOOLS_REFRESH"
    Application.CalculateFullRebuild
    'Get the total number of pages to be printed for the selected P&L
    Application.StatusBar = "Counting pages to be printed for this P&L..."
    intTotalPrintingPages = 0
    For j = 1 To Range(strColHead).Columns.Count
        If Range(strDataRange).Rows(I).Columns(j).Value = "x" Then
            strTabName = Range(strColHead).Rows(1).Columns(j).Value
            For Each pb In Sheets(strTabName).HPageBreaks
                If pb.Extent = xlPageBreakPartial Then
                    intTotalPrintingPages = intTotalPrintingPages + 1 'add one sheet to the count for each page break
                End If
            Next
            intTotalPrintingPages = intTotalPrintingPages + 1          'each sheet will print 1 more page than there are page breaks
        End If
    Next j
    Application.StatusBar = intTotalPrintingPages & " total pages for " & strRowHead
    'Cycle through each of the tabs (only if it is marked with an 'x')
    intPageStartCount = 0
    For j = 1 To Range(strColHead).Columns.Count
        If Range(strDataRange).Rows(I).Columns(j).Value = "x" Then
            strTabName = Range(strColHead).Rows(1).Columns(j).Value
            'Set the footer
            Application.StatusBar = "Building the page footer for " & strTabName & "..."
            Sheets(strTabName).PageSetup.CenterFooter = " Page &P+" & intPageStartCount & " of " & intTotalPrintingPages
            'Print the current sheet
            Application.StatusBar = "Printing " & strTabName & " for " & strRowHead & "..."
            Sheets(strTabName).PrintOut Copies:=1, Collate:=True
            'Bump up the start value for page numbering
            For Each pb In Sheets(strTabName).HPageBreaks
                If pb.Extent = xlPageBreakPartial Then
                    intPageStartCount = intPageStartCount + 1          'add one sheet to the count for each page break
                End If
            Next
            intPageStartCount = intPageStartCount + 1                  'each sheet will print 1 more page than there are page breaks
        End If
    Next j
Next I
'Put the OutlookSoft CurrentView toolbar back to where the user had it.
Application.StatusBar = "Resetting the CurrentView toolbar"
Application.CommandBars("OutlookSoft CPM CurrentView").Position = intOSBarStartPosit
Application.CommandBars("OutlookSoft CPM CurrentView").Visible = blnOSBarStartVis
'Alert the user that the process is complete
Application.StatusBar = "Processing complete...notifing user"
dteEndTime = Time
intRunTimeSeconds = DateDiff("s", dteStartTime, dteEndTime)
intRunTimeMinutes = intRunTimeSeconds \ 60
If intRunTimeMinutes > 0 Then
    intRunTimeSeconds = intRunTimeSeconds Mod (intRunTimeMinutes * 60)
End If
For k = 1 To 3
    Beep
Next k
Application.DisplayStatusBar = blnOldStatusBar
MsgBox "The report generation process is complete." & Chr(10) & _
    "Total retreival and printing time:" & Chr(10) & _
    "    Minutes: " & intRunTimeMinutes & Chr(10) & _
    "    Seconds: " & intRunTimeSeconds, vbOKOnly + vbInformation, "Process Complete"
End Sub

Sub cmdRun_Click()
Dim strColHead As String, strRowHead As String, strDataRange As String
Dim I As Integer, j As Integer, k As Integer
Dim blnOldStatusBar As Boolean, blnOSBarStartVis As Integer, intOSBarStartPosit As Integer
Dim strPL As String, strTabName As String
Dim intTotalPrintingPages As Integer, intPageCountStart As Integer
Dim dteStartTime As Date, dteEndTime As Date, intRunTimeSeconds As Integer, intRunTimeMinutes As Integer 'Record the start time
For I = 1 To Range(strRowHead).Rows.Count 'Change the currentview P&L
    Application.StatusBar = "Changing the CurrentView..."
    strPL = Range(strRowHead).Rows(I).Columns(1).Value
    ChangeCurrentView "P_L", strPL 'Refresh and Expand
    'Application.Calculation = xlCalculationManual 'temporarily turn off Excel's automatic calculation
    Application.Run "MNU_eTOOLS_EXPAND"
    'Application.Calculation = xlCalculationAutomatic 'turn the automatic calculation back on
    Application.Run "MNU_eTOOLS_REFRESH"
    Application.CalculateFullRebuild 'Get the total number of pages to be printed for the selected P&L
    Application.StatusBar = "Counting pages to be printed for this P&L..."
    intTotalPrintingPages = 0
    For j = 1 To Range(strColHead).Columns.Count
        If Range(strDataRange).Rows(I).Columns(j).Value = "x" Then strTabName = Range(strColHead).Rows(1).Columns(j).Value
            For Each pb In Sheets(strTabName).HPageBreaks
                If pb.Extent = xlPageBreakPartial Then intTotalPrintingPages = intTotalPrintingPages + 1 'add one sheet to the count for each page break
                End If
            Next
        intTotalPrintingPages = intTotalPrintingPages + 1 'each sheet will print 1 more page than there are page breaks
        End If
    Next j
    Application.StatusBar = intTotalPrintingPages & " total pages for " & strRowHead 'Cycle through each of the tabs (only if it is marked with an 'x')
    intPageStartCount = 0
-> Displays the line as programming code is not workin!
Edited by: Sam Patel on Aug 27, 2009 12:45 PM
Edited by: Sam Patel on Aug 27, 2009 12:45 PM
Edited by: Sam Patel on Aug 27, 2009 12:46 PM
Edited by: Sam Patel on Aug 27, 2009 12:47 PM
Edited by: Sam Patel on Aug 27, 2009 12:47 PM
Edited by: Sam Patel on Aug 27, 2009 12:49 PM
Edited by: Sam Patel on Aug 27, 2009 12:49 PM
Edited by: Sam Patel on Aug 27, 2009 12:50 PM

BPC 7.5 NW - EVDRE error retrieving data

Hello all.
I have a problem with my BPC 7.5 NW system.
I am working with BPC 7.5 NW SP07, and I did all the installation and configuration steps with both .NET and ABAP components.
But when I try to execute an EVDRE, the system shows the next error message:
"EVDRE encountered an error retrieving data from Web Server"
I checked ST22 transaction and I saw that /BI0/02xxx tables are not created or activated. I checked these tables in SE11 transaction, and they don´t exist.
I saw several posts and a couple of notes with this problem. They say that these temporary tables are needed to be created or activated, but I couldn´t see anywhere the way to solve the problem in case the tables are not created.
Does anyone have any idea? What is the cause of this problem? Why these are not being created?
Thanks in advanced.
Best regards,
Fernando

1. Login into BPC for Admin
2. Once logged into your Appset , open the Dimension library
3. Process each dimension by selecting the "Process members from membersheet" and by unchecking the "Take system offline" option
4. Process all the dimensions one by one not together.
5. Once processing the dimensions is done then open the Applications and Modify each Application by adding or changing the Application Description.
6. Once done modifying Applications then logout of the BPC Admin and BPC Excel.
7. Login back again into BPC for Excel by going through the connection wizard.
Ideally this should solve your problem and If all the dimensions are processed successfully then logoff and login to see if you stilll see the EVDRE error.
Hope this helps.
Regards,
Sanjeev

How To... Change the Data Type for a SELECT-OPTIONS at run time.

Hello,
I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
I would like the following example to be possible:
The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
declaration of variables for user interface
DATA c_char(32) TYPE c.
declaration of count variable
DATA i_count TYPE i.
declaration of user interface
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
    PARAMETERS: p_ipack TYPE RSLOGDPID.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_char1 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char1 for c_char NO INTERVALS.
    PARAMETERS: p_char2 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char2 for c_char NO INTERVALS.
    PARAMETERS: p_char3 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char3 for c_char NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
Is what I am trying to do possible???
Thanks for any help. Ross.

You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
Here is what you do: Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR.. The first thing you do here is read the value of the parameter field (p_ipack in your example). You can use function module DYNP_VALUES_READ. Based on this value, you can propose values for the select-option fields. Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

BPC 7.5 NW: Unexpected changes in data after changing the a/c hierarchy

Similar Messages

Maybe you are looking for