BPC 7.5 SP06 open IS SP05 Error Dimension

Hi, i am working in Client using SP06 the BPC 7.5 NW Client, and working too in Client using 7.5 SP05.
I have the Client for NW 7.5 SP06 BPC and I can not open InputShedules the SP05 version, get CurrentView problem in Dimensions.
Any idea ?
Thank you.

Hi ,
You can access Input schedule of SP05 only when you have BPC 7.5 SP05 installed on your system and not SP06 version .
Using clients out of sync from the server is never recommended
The best approach would be to use something like VMware to create virtual clients to test and use both the versions .
Hope this helps.
Sanjeev
Edited by: sanjeev.s on Aug 30, 2011 1:02 PM
Edited by: sanjeev.s on Aug 30, 2011 1:41 PM

Similar Messages

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

Cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Unable to open pst file error details access to the path is denied

Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
Thx

Move your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies

"Unable to Open Project File" - error

Does anyone know how to resolve an "Unable to Open Project File" - error. I accidentally shut down my computer wrong, although Final Cut wasn't open.

Welcome to the forums.
The project file might have gotten corrupted. Look for the AUTOSAVE VAULT (typically in the DOCUMENTS>FINAL CUT PRO DOCUMENTS folder) and open the most recent version. Copy it to your main project folder if it works.
If not, then try trashing your prefs with FCP Rescue.
Shane

Error R6034 during update. iTunes will not open due to error.

Get Error R6034, Application attmempting to load C runtime library incorrectly. iTunes will not install ammanulaly and now iTunes will not open due to error.

Try updating your QuickTime Player to the latest version. Does that clear up the DEP errors in iTunes?

Hey when ever i download and install Itunes then i open it says error finding folder please re download and I tried a tons of times and it didn't work. Does anyone know how to fix this?

Hey when ever i download and install Itunes then i open it says error finding folder please re download and I tried a tons of times and it didnt work. Does anyone know how to fix this?

Hi Beege140,
I have an article for you that will help you address this launch issue with iTunes:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

ITunes not opening. NO ERROR MESSAGE

I cannot get iTunes to open. When I double click on it, the "hour glass" shows up, and I give it a minute or more, but the program does not open? I have the updated verision, but cannot get it to open. No error message when I try to open it...no program...nothing. Nothing at all.
Can anyone please help?
Thank you

I'm having a similar problem. When I open Itunes I'm asked for my password but it doesn't allow me to enter my password or do anything else at all! When I then open task manager I find Itunes is not responding.
I have tried closing other programs, restarting the PC, downloading a new version of Itunes and repairing (that didn't work), then uninstalling and then reinstalling (same problem!)
What can I do? I can't sync or anything!

HT201210 After downloading latest version of iTunes it will not open. This error message is displayed; The program can't star because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then a second error box

After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Failed to open service OracleDEV102TNSListener , error 1060

Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
I have set the all the Environment variables , i run r3trans -d and the result is
C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Event Viewer result is
----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.
finally in SAPINST logs i could see

Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,

Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards,

Item Open Interface giving error for Org Assignment

We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?

Pl do not post duplicates - Item Open Interface giving error for Org Assignment

Open DeviceNet interface error when TestStand call VIs of NI PCI-8532

Hello,
We use NI PCI-8532 was used as DeviceNet master to do functionality test with a slave (AC Drive).
But when open DeviceNet interface, it happen the error.
We can't find the solution and hope to find help from you.
The basic sequence in TestStand is:
1). Call "Open DeviceNet Interface.vi" to open interface and creat interface object.
Interface(master) setting: interface name=dnet0, MAC ID=0, baudrate=125000bps
2). Call "Open DeviceNet IO.vi" to creat DeviceNet IO object.
Device(slave) setting: MAC ID=63
3). Call "Operate DeviceNet Interface.vi" and operation code=start
4). Call "Wait For State.vi"
5). Call "Read DeviceNet IO.vi" to read data from IO object
6). Call "Close Object.vi" to close IO object handle
7). Call "Close Object.vi" to close interface object handle
Remark, these DeviceNet VIs locates at "C:\Program Files\National Instruments\LabVIEW 2012\vi.lib\DeviceNet\VIAPI".
First time to run sequece in TestStand, it can pass to run step 1) to open DeviceNet interface.
But once there is some error with these steps, and it will happen "Open DeviceNet Interface" error (error code=0xBFF62006) when run these steps again.
Then even use LabVIEW DeviceNet example to test, and it happen the same error except restart computer.
The DeviceNet example locates at "C:\Program Files\National Instruments\LabVIEW 2012\examples\NI-Industrial Communications for DeviceNet\Basic Examples\PXI & PCI\MixedCommunication.vi".
Some information more:
PC operate system: Windows XP SP3
LabVIEW version: 2012 SP1
TestStand version: 2012 SP1
PCI 8532 driver version: 2.3.0
Other installed PCI board: PCI 8531 CANOpen

The following errors may be resolved by resetting the CAN, DeviceNET or LIN device:
Error -1074388986 occurred at ...
NI-CAN: (Hex 0xBFF62006) The object is already open in another application. Solutions: Ensure that only one application at a time uses an object , and that you close all objects prior to exiting your application (don't use LabVIEW toolbar's Abort button).
Error -1074388969 occurred at ...
NI-CAN: (Hex 0xBFF62017) This attribute's value must be provided prior to the Open. Solutions: Set the attribute using the Config function before the Open, and do not set the attribute at any later time; Do not configure multiple CAN Objects for the same ID.
SO,you should reset the DeviceNet.
And another similar issue can explain some points of your problem http://digital.ni.com/public.nsf/allkb/7D9383E9BEAD0B21862571640002F687?OpenDocument

Open dataset input error

Hi guys
i am trying to open more than 100 files using open dataset input but i am getting below error
program is abending reading after 50files..
Program failing in open data set error can u help me please?
143
144 * Each file is getting into an internal table
>>> OPEN DATASET w_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
146 IF sy-subrc <> 0.
147 CONTINUE.
148 ELSE.
149 DO.
150 READ DATASET w_file INTO s700_delta.
What command I should give here
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_TOO_MANY_FILES', was not
 caught and
 therefore caused a runtime error.
 The reason for the exception is:
 The maximum number of open files (100) has been exceeded.
please let me know what should makes changes to avoid this abend?

Standard programming problem, should be rather trivial to find with a quick search. Basically there's always a limit of how many open file handles you can have at a time.
Please try to consult the ABAP help next time before posting (or search on SCN). A quick check for [open dataset|http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET.htm] would've told you the following:
You can open up to 100 files per internal session. The actual maximum number of simultaneously open files may be less, depending on the platform.
Most likely you actually don't want to have all those files open at the same time and you simply forgot to use a [close dataset|http://help.sap.com/abapdocu_70/en/ABAPCLOSE_DATASET.htm] after reading each file.

Open Session: unexpected error

Hi everybody,
I'm using BO XI R3.0 and since couple of last days I'm having problem with opening Universe Designer. The message I'm getting is "Open session: unexpected error". This happens after I provide user name and password for the access to the system.
Does anyone know the solution to the problem beside uninstalling Client tools etc. (I already did that) because the same happens when I want to open Desktop Intelligence, Translation Manager, etc.
Ivan

In addition to my previous question, I have another query. I am trying to create a macro to rename, hide/show and change some more properties of universe objects. Below is the code to log on to designer and open the required universe
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Set DesignerApp = New Designer.Application
    DesignerApp.Visible = True
    Call DesignerApp.LogonDialog
    Set Univ = DesignerApp.Universes.Open
    DesignerApp.Visible = False
    Set Wksht = ThisWorkbook.Worksheets("Objects")
    Wksht.Unprotect
    Range("Objects").ClearContents
    Call GetObjectInfo(Univ.Classes, 1)
    Range("Objects").Resize(Wksht.UsedRange.Rows.Count - 1, 5).Name = "Objects"
    Range("Objects").Columns("H:L").Value = Range("Objects").Columns("B:F").Value
    Wksht.Protect
    DesignerApp.Quit
    Set DesignerApp = Nothing
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What happenns is that after I log on using my macro, if I try to log on to designer again I get the "Open Session: unexpected error" error. If I delete the LSI folder on my local machine, then I can log on fine. but everytime I use the macro I get the error afterwards. I am logging onto a SAP system.
Any help on this one?

BPC 7.5 SP06 open IS SP05 Error Dimension

Similar Messages

Maybe you are looking for