BPC 7.5 upgrade process - Doubts

Hi,
Once we had the confirmation and approval to upgrade the system from SP00 to SP03 (on .NET server components), we noticed that some functional configurations had been made in the meantime. This new scenario where new things had been done from a functional perspective makes me wonder if any of that configuration could be lost while or after upgrading the server component?
Also, after reading Note 1453797 - Planning and Consolidation 7.5 SP03 NW Central Note, section "Before you install" to be more specific it says to uninstall any previous version of the .NET server and client components. Also Scott recommended me that as a best practice. This applies when the upgrade is being done from BPC 7.0 to BPC 7.5 for example or it also applies to my case (uprading BPC 7.5 system from SP00 to SP03)?
Thanks again for your help.
Regards

Hi Ethan,
Thanks for the quick response.
Actually I'm new installing BO BPC and maybe I've not used the correct words to describe that configuration I've detected while trying to install SP03. What I've noticed is that an Initial Application Set has been created. Actually, this is the only thing I have found but I'm not sure if that imply any other configurations either in .NET server or ABAP server that could be lost after upgrading the server component from SP00 to SP03. The same question arises if I decide to uninstall the current installation to perform a fresh one using SP03 directly as its described in note 1453797.
In summary, is there any chance to lost the configuration made on a BPC system (.NET and ABAP servers or client) if any of the above upgrade process is performed?
Hope being clear enough this time thanks so much for your help.
Kind regards

Similar Messages

11g Upgrade Method Doubt....

Hi, DB Version: 11.1.0.6 O/S : Win XP Prof I am reading 11g docs.In the Upgrade guide, there are quite a number of ways listed for the upgrade.Please look here. The listed ways are
(1)Database Upgrade Assistant (DBUA)
(2)Manual upgrade using SQL scripts and utilities
(3)Export and Import utilities
(4)CREATE TABLE AS SQL statement
For the last, 4th option,the details are these, Copies data from a database into a new Oracle Database 11g Release 1 (11.1) database. Data copying can copy a subset of the data, leaving the database unchanged. I am not able to understand how CTAS is a way to upgrade?How it can be an option for upgrade when we are just porint data from one database of 11g to another.The same method is given in 11g New Features Book from OU also.If anyone can throw any light over thismethod of upgrade than please do.
Further,if you just click on Choose an upgrade method link, this method is not listed there. The only 3 which are listed are traditional ones, DBUA, Export/Import, Manual.
Please clear this for me how this method is usable in the upgrade process?
Regards
Aman....
Changed url tags.
Message was edited by:
Aman....

Hans,
Now go back and see if you can answer your
question about 'method 4'
I knew you would say the same to me that's why I
mentioned couple of posts above that I am getting
your point :-).<g>
Please correct me now in my understanding.This method
is actualy not an upgrade atleast not the one through
which we will upgrade teh entire db.This is the one
when we have two dbs of 11g and from 1 we are
migrating few objects ( tables) with some
restrictions on data to db B.Is this correct?You are correct. This is not an upgrade to an existing database.
However, it can be considered an upgrade in the sense that the data source for an application is 'upgraded'. From the application's perspective, the data source used to be 10g and now it is 11g.
Hans, my doubt since the origin of this question is
with the title.This title doesn't seem to be
appropriate. "Data Copying" which is the title in the
previous relases docs sounds more appropriate where
this CTAS is given as an example not as a sole way.Again, I agree. It is all a matter of [mis-]interpretation and perspective.

Upgrade process to SAP Solution Manager 7.1

Hello!
We use SAP EHP 1 for SAP Solution Manager 7.0 (SPS 26) and plan to upgrade to the new SAP Solution Manager 7.1.
We currently do not have Java Stack there.
Some questions about Upgrade process
1) Can a direct Upgrade from SAP EHP 1 for SAP Solution Manager 7.0 (SPS 26) to SAP Solution Manager 7.1 be realized?
2) Should we first install Java Stack and then proceed with the Upgrade or otherwise?
3) Will Windows 32 Bit and None-Unicode Version of SAP Solution Solution Manager be supported?
It will be great to get some helpful information.
kind regards

Hello!
Trying to answer your question
1) As described in note 1244225, there no restriction to upgrade the Solman EHP1 to solman 7.1. Refer to the section:
In case you do not participate in this current Solution Manager 7.1 beta shipment there are no restrictions for implementing now SP stack 25 and upgrading in the future to an equivilant SP stack of release 7.1."
2) The Solman EHP1 must always be a dual stack system, I am not sure, how you are running the Solman EHP1 without a Java Stack, you should have one.
3) I am not sure if there will be a Solman 7.1 32Bit Non-UNICODE version. But, SAP recommends to run Solution Manager on Unicode (see also customer letter on http://service.sap.com/Unicode). At solman EHP1 there are some issues when running the system as Non_UNICODE, refer note 1383407.
I am not sure if I could clarify all your doubts.
You may check the following URL:
http://service.sap.com/instguides
- SAP Components
- Solution Manager 7.1
As this is a very new software there is few documents in it, but soon you should see a upgrade guide here.
Regards,
Allam

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Moving from 32-bit to a 64-bit OS how will this impact ebs upgrade process

we are planning to upgrade from ebs 11.5.10.2 to r12.1 .3
My concern is since we will be moving from 32-bit to a 64-bit OS how will this impact our upgrade process?

Hi;
we are planning to upgrade from ebs 11.5.10.2 to r12.1 .3
My concern is since we will be moving from 32-bit to a 64-bit OS how will this impact our upgrade process?I assume your EBS single machine. EBS r11 is not certified wiht 64 bit OS.So you need to upgrade first than migrate it 64 bit
See:
32bit to 64 bit migration-EBS-Linux
EBS r12 migrate 32-bit to 64-bit.
32 bit to 64 bit 11i migrate
Migrattion of E-Business Suite.
Regard
Helios

Is R3load used in Upgrade process

Hi all,
During Upgrade in CONFIGURATION PHASE when we select
> MANUAL SELECTION OF PARAMETERS & provide values R3load is by default 3
I am pretty confused where R3load is used in Upgrade process
Why is R3load not mentioned in the Upgrade Guide if it is effectively used
SAP ERP 6.0 Including Enhancement Package 4 Support Release 1 ABAP
Based on SAP NetWeaver 7.0 Including Enhancement Package 1
Pls advice on the following
-Rahul

Hi,
As already mentioned R3load is what will load the database tables during Upgrade process. If you have enough resources you can speed up the downtime Upgrade Process using more R3load parallel processes but this will depend in how many CPU's and memory you have. Usually each R3load process will take around 512Mb of RAM and you can use 1.5 R3load processes per CPU.
I have used this numbers given to us by SAP and did not have any problem at all.
Good luck,

Upgrade Process from SQL 2005 to SQL 2012

Hi All,
I have gone thru multiple threads and would like to understand some steps in detail for me to upgrade SQL 2005 to SQL 2012.
Below is my understanding and questions around it, I would be setting up a new environment with OS 2007/2008 with SQL 2012:
Environment Readiness - Ensure new environment is ready with Win 2007/2008 with SQL 2012 Server
Run Upgrade Advisor on the new environment and point to SQL 2005 instance
Find the breaking/discontinued changes to be done before or After Upgrade
<Question>: Over here I would like to know what should be our approach to make the required changes
<Question>: Obviously I should not be making changes directly on the Production SQL 2005 server, then in that case should I take a backup/restore on the new SQL Server 2012 and then make the required changes to the database objects
like (Table schema(changing column names/datatypes etc.), Stored Procedure, Functions & Views)
<Question>: When I do a backup/restore I would also get the data along with it, so is this a recommended approach or should we only run/use the table schema creation scripts, fix the issues identified by UA and then do an Table to Table import,
any thoughts on this ?
<Question>: If I have to do a table to table Import then I should ensure there's a downtime during the Import or would I have any other better approach
So, basically my questions are around the approach of fixing the issues identified by UA and moving the database to SQL Server 2012 environment, I have around 300 databased to me upgraded.
Please do let me know what should be a good/proven approach ? Pl. do let me know if you would need any more details from me.
---Umesh

Thanks all for the replies.
I am trying summarize what I have understood here:
Document SQL Server 2005 environment details, Is there any tool which could give us all relevant details
I would take the backup from the SQL Server 2005 Production environment and then restore the same in a test environment which again has SQL Server 2005 and Run Upgrade Advisor on that
Probbaly run SQL Profiler as well to find out the deprecated changes to be done
I should fix all the breaking, discontinued changes on the Test system identified by UA
I should fix all the deprecated changes on the Test system identified by SQL Profiler
Steps 3 & 4 should give me the changed scripts for all database objects (i.e. Table Schema, Stored Procedures, Functions & Views)
<Question> Perform test, I understand this acitivity test can be captured by having SQL profiler running in the background on the SQL Server 2005 production environment where we can identify some days in a week or a month where maximum activity is
expected to ensure we cover most the scenarios, let me know is this approach looks fine or is there a better approach
Now, with regards to acutal upgrade I need to identify a time window where in less activity is done during which I could have a downtime for the actual SQL Server 2005 production environment
Post downtine, I should do a BackUp for all databases from SQL Server 2005 production environment
Test on environment readiness of SQL Server 2012 can be compared against the documentation done as part of the first Step
<Question> Ideally I should a restore first in the new environment which has SQL Server 2012
<Question> Then run the Scripted changes where we fixed all the breaking, discontinued & deprecated changes
<Question> Does above sequence of Step 9 & 10 make sense or is there a better approach of doing it
<Question> Post Upgrade and running of changed scripts, I should run the Upgrade Advisor again and see if everything looks fine
<Question> Perform test again which we ran on SQL Server 2005 Test environment
<Question> These steps should complete the Upgrade process.
Please do let me know if the above sequence look ok to all of you and does it really work in a practical scenario, do let me know your feedback or any change in sequence/process or any other tools that can be used here.
Thanks Again ...

Error in Upgrade Process

We are doing Upgrade Process in BW 3.5 server to 7.0 Server.
in that Upgrade Process, we got this error Invalid object name 'SVERS'.
Please find the solution for this error and reply to me..
thanks in advace.
regards,
mohankumar.g

I had the same problem when I was doing upgrade R/3 to ECC 6.0.
Check out SAP notes, there is updated SAPup.exe, and if you changed DDIC password, change it with only numbers. then it worked.

BPC 7.5 Custom Process Chain - Error Found In BPC

Hi,
I have created a custom process chain to run a BADI(Not Default) to process Actual data.
In the process chain, I have just two steps:
Start process and
Run Logic
In run logc, I have following parameters.
SUSER:     Blank
SELECTION:         Blank
SAPPSET:     ASA_APPS
SAPP:     HR
LOGICFILENAME:     PRE_BUD.LGF
I have linked to DMP and when I run the process chain, I have this error: "Error Found in BPC". I have debugged the BADI code and the code seems to be working fine. It appears that we need another step to pass the control back to BPC. Is step process type "Clear BPC tables" mandatory?
I do not need any other dynamic parameters at the moment. Do I need to give any more parameters to get this working without any errors?
Your early reponse is much appreciated.
Regards,
Venkata

Hi Nilanjan,
I have done like you have suggested.
It is working as expected but when you view status, it is ending with following error :
Error Found in BPC
Application : HR Package Status: Error
Interestingly, it is executing BADI and results in the cube.are good.
Now the parameters in run logic are:
TAB Blank
SUSER     Blank
SELECTION        Blank
SAPPSET     ASA_APPS
SAPP     HR
REPLACEPARAM Blank
MEMBERSELECTION Blank
LOGICFILENAME     PRE_BUD.LGF
EQU     Blank
I did not give any parameters in Modify dynamically process type.
Do I need to give any more parameters to avoid the error?
Any way to make the package status completed would be good.
Regards,
Venkata

Siebel 7.8 -- 8 upgrade process and environments

Hi,
I'm new to Siebel Upgrade and I'm trying to figure out the upgrade process searching on the bookshelf and white papers (best practices).
I still can't comprehend the upgrade architecture and where the new Siebel sw (for ex. Siebel 8 in my case) has to be installed:
Let's suppose to have 3 starting environments: development (7.8), test/production replication (7.8) and production (7.8).
According to the bookshelf there's an initial phase (and this is valid for development environment too) called "upgrade infrastructure" in which they talk about "upgrading" the server, gateway, SWSE, etc. and about installing Siebel software.
For example at pag. 26 in Upgrade Guide version 8.1, during the development environment upgrade explanation, you can read:
"...Upgrade the Gateway Name Server, Siebel Servers, and Siebel Web Server Extension (SWSE).
For information upgrading these Siebel Enterprise components, see Siebel Installation Guide for the operating system you are using.
3 - Install the Siebel Database Server files on the Siebel Server you will use to perform the upgrade.
You only need to install the database server files for the database type that you are upgrading.
4 Install language packs for your currently deployed languages and any new languages...."
Now, starting with a 7.8 development environment, what do they mean: Do I need to install on the same development box (where the 7.8 already resides) also a new 8 development environment (server, gateway, etc.) in order to execute the development upgrade process?
And then, should I install another new 8 environment on the Production/Test machine, in order to perform the production/test environment?
Finally, should I use the test machine (once all is tested as the new production environment?
Probably I'm a bit confused. Can you help me?
Thank you,
Best Regards

Your upgrade process depends on how you want to carry out.
For a Inplace upgrade, whicih means you will be using the existing hardware where earlier version exists, you need to uninstall the earlier version install the new version and the kick of your siebel database upgrade.
The other process is where you obtain new hardware, in this case install new version of siebel software as per requirements and then start your siebel database upgrade. For this you may need to replicate your existing siebel database.
This process applies to all the environments.

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

IDSM-2 upgrade process questions.

Hello,
I started a new job and have been tasked with looking into what we can do with the IDSM-2 module we have in our 6509. The company has not been using the module so it hasn't been updating in a few years. I do not have a current license so I know I cannot install new signature updates, but what I would like to do is upgrade the software to version 7.0(5a)E4. Once I have it upgraded I would like to configure it in our environment and then see about getting a signature license.
I have a few questions regarding the upgrade process, and could use some assistance.
First the IDSM is currently running version 5.1(3)S256.0. From what I have read I don't believe I can go directly to 7.0(5a)E4 so my Planned Upgrade Path is: 5.1(3)S256.0 -> 5.1(8)E3 -> 7.0(5a)E4.
Am I able to upgrade this way or is there another recommended way that I should do this upgrade?
The files I have for this are below, will they be enough or am I missing any?
Do I apply them in the order listed?
Can I apply all of these files from the IDM GUI?
IPS-K9-5.1-8-E3.pkg
IPS-engine-E3-req-5.1-8.pkg <--- Is this included in the above file?
IPS-K9-r-1.1-a-5.1-8-E3.pkg
IPS-K9-7.0-5a-E4.pkg
IPS-K9-r-1.1-a-7.0-5a-E4.pkg
I plan on backing up my configuration first just in case, but should this process have any affect on the configuration?
I also saw that the upgrade will convert the configuration, so should I back it up a second time between the 5.1(8)E3 and 7.0(5a)E4 step?
Will there be any effect on network traffic or downtime during this process?
Is there any thing else I need to be aware of or that I'm missing?
Thanks in advance,
Will

Hi Will. Since you indicated that this sensor has not been in-use, it would be quickest/easiest to simply re-image it directly to the desired version (7.0(5a)E4). Additional benefits of doing this are that the sensor's filesystem will be created clean, OS/binaries cleanly installed, no potential config conversion issues, etc.
Step-by-step instructions for doing this can be found here.
And, the System Recovery Image file you will need ('IPS-IDSM2-K9-sys-1.1-a-7.0-5a-E4.bin.gz') can be downloaded here.
Will there be any effect on network traffic or downtime during this process?
That depends on whether the sensor is configured in Promiscuous Mode or Inline [VLAN Pair] Mode. You can determine this from the Catalyst config. If the sensor is installed in Inline [VLAN Pair] Mode, then certainly the re-image (and even just upgrade) could be traffic-impacting (if there is no alternative/backup path for traffic to take), as in both scenarios, the sensor is rebooted and not available for ~10 minutes (during which time, it would not be forwarding traffic (if it were installed Inline)). Additionally, since re-imaging results in a clean/default config, if the sensor were configured Inline, that portion of the config would have to be re-input post-reimage so that the sensor would know to forward traffic accordingly again. Details about the modes can be found here.

CF 9 Upgrade process Ran All Scheduled Tasks

I just completed the upgrade process from CF8 Enterprise to CF9 Enterprise on our test system, Windows 2003 R2P2 using IIS6 and SQL Server 2000. I have no schedule tasks with an active schedule, but the upgrade process ran all of the tasks. Running all of the scheduled tasks created 200+ e-mails.
Any ideas on what happened? I ran the coldfusion_9_wwe_win.exe and installed the CF9 ODBC and CF9 SOIR services.
If this happened on my TEST system (with no actively scheduled tasks) what's going to happen when I upgrade my production system?
Thanks in advance for your time.
Libby

I can't answer your specific question (*), but I would seriously reconsider your approach of UPGRADING a CF server. Set up CF9 in parallel, and migrate the application/website across to it.
If you do an inline upgrade and it fails: you've got nothing to fall back on. If you to a "cross-grade", your working CF8 instance is still there as a fail-over, if anything goes wrong with the CF9 install.
Adam
(*) you might want to raise a bug report, though.

Cisco Modem Firmware (HWIC) upgrade Process

HI experts,
I need to upgrade firmware of my LTE ( Hwic) module for the router 2901. I am wondering if this is the part of IOS upgrade process , I mean ones I upgrade IOS to the latest version will it upgrade my modem firmware by own or I need to upgrade LTE modem separately?
can you guys please share your experience here?
any docs on this please?
Thanks!

Hi,
The LTE module is part of main Cisco IOS you load into the router. Once you upgrade the IOS, it also applies to the module.
ntegrated 4G LTE WWAN broadband: With the 4G LTE WWAN modem integrated into the router, you gain the benefits of simplified installation and management. In addition, the Cisco 4G LTE WWAN EHWICs are tightly integrated with Cisco ISRs, which run the industry-leading Cisco IOS® Software, giving access to all the advanced features of Cisco IOS Software such as quality of service (QoS), intelligent network queuing, and robust security.
Link:
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/4g-lte-wireless-wan-enhanced-high-speed-wan-interface-card/datasheet_c78-710314.html
HTH

ADM(Anomaly Dectector Module) PowerDown Failure in upgrade process.

hellow, everyone.
i'm yunchouljung in korea
i have a question about ADM module power down issue.
i had upgraded AGM Module successfully in version 6.1.2 to 6.1.6
but failed ADM Module upgrade in version 6.1.2 to 6.1.6
i uploaded a AP images in MP status and enterd "hw-module module 12 reset cf:4" command.
(i waited a message "you can now reset the module....")
after a reset process, ADM module disabled by SCP dnld Failure.
so, i enabled a power on ADM Module but result is same.
my upgrade process is below.
1.     hw-module module 12 reset cf:1
2.     copy ftp://[email protected]/c6svc-adm1G-k9.6-1-6.bin pclc#12-fs:
3.     hw-module module 12 reset cf:4
anybody help me?
thanks in advance.
p.s : i have already tested other ios version and ap/mp images.
================================================================
the module version and log is below.
Router_OUT#sh module
Mod Ports Card Type                              Model              Serial No.
2    3 Anomaly Guard Module                   WS-SVC-AGM-1-K9
3   16 16 port 1000mb GBIC ethernet           WS-X6416-GBIC
5   48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX
7    2 Supervisor Engine 720 (Active)         WS-SUP720-3B
9    4 CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE
10    8 Network Analysis Module                WS-SVC-NAM-2
12    3 Anomaly Detector Module                WS-SVC-ADM-1-K9
Mod MAC addresses                       Hw    Fw           Sw           Status
2 0017.e067.ec6c to 0017.e067.ec73   2.0   7.2(1)       6.1(6)       Ok
3 000e.d73c.3d40 to 000e.d73c.3d4f   2.5   5.4(2)       8.5(0.46)RFW Ok
5 0015.2bfe.c130 to 0015.2bfe.c15f 10.1   7.2(1)       8.5(0.46)RFW Ok
7 0016.c85e.3aa0 to 0016.c85e.3aa3   5.2   8.4(2)       12.2(18)SXF1 Ok
9 001b.d45d.f890 to 001b.d45d.f893   2.6   12.2(14r)S5 12.2(18)SXF1 Ok
10 0003.fead.7592 to 0003.fead.7599   2.0   7.2(1)       4.0(1)       Ok
12 0012.80f1.1ae8 to 0012.80f1.1aef   1.0   7.2(1)       8.5(0.46)RFW PwrDown
Mod Sub-Module                  Model              Serial       Hw     Status
7 Policy Feature Card 3       WS-F6K-PFC3B       SAL10478K1R 2.3    Ok
7 MSFC3 Daughterboard         WS-SUP720          SAL104892TJ 2.5    Ok
9 Centralized Forwarding Card WS-F6700-CFC       SAL1124QX44 3.1    Ok
Mod Online Diag Status
2 Pass
3 Pass
5 Pass
7 Pass
9 Pass
10 Pass
12 Not Applicable
Router_OUT#
47w1d: SP: The PC in slot 2 is shutting down. Please wait ...
47w1d: SP: shutdown_pc_process:No response from module 2
Jul 13 16:54:49: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset)
47w1d: SP: OS_BOOT_STATUS(2) MP OS Boot Status: finished booting
Jul 13 16:56:50: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...
Jul 13 16:56:57: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.
Jul 13 16:56:57: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics
Jul 13 16:56:57: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now online
Jul 13 16:56:58: %SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks
Jul 13 17:32:23: %SVCLC-SP-5-STRRECVD: mod 2: <Application upgrade has started>
Jul 13 17:32:23: %SVCLC-SP-5-STRRECVD: mod 2: <Do not reset the module till upgrade completes!!>
Jul 13 17:42:11: %SVCLC-SP-5-STRRECVD: mod 2: <Application upgrade has succeeded>
Jul 13 17:42:11: %SVCLC-SP-5-STRRECVD: mod 2: <You can now reset the module>
47w1d: SP: The PC in slot 2 is shutting down. Please wait ...
47w1d: SP: PC shutdown completed for module 2
Jul 13 17:42:57: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset)
47w1d: SP: OS_BOOT_STATUS(2) Anomaly Guard OS Boot Status: finished booting
Jul 13 17:45:03: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...
Jul 13 17:45:06: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.
Jul 13 17:45:06: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics
Jul 13 17:45:06: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now online
Jul 13 17:45:07: %SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks
47w1d: SP: The PC in slot 12 is shutting down. Please wait ...
47w1d: SP: shutdown_pc_process:No response from module 12
Jul 13 17:53:29: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Reset)
47w1d: SP: OS_BOOT_STATUS(12) MP OS Boot Status: finished booting
Jul 13 17:55:30: %DIAG-SP-6-RUN_MINIMUM: Module 12: Running Minimal Diagnostics...
Jul 13 17:55:37: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.
Jul 13 17:55:36: %DIAG-SP-6-DIAG_OK: Module 12: Passed Online Diagnostics
Jul 13 17:55:37: %OIR-SP-6-INSCARD: Card inserted in slot 12, interfaces are now online
Jul 13 18:26:27: %SVCLC-SP-5-STRRECVD: mod 12: <Application upgrade has started>
Jul 13 18:26:27: %SVCLC-SP-5-STRRECVD: mod 12: <Do not reset the module till upgrade completes!!>
Jul 13 18:37:05: %SVCLC-SP-5-STRRECVD: mod 12: <Application upgrade has succeeded>
Jul 13 18:37:05: %SVCLC-SP-5-STRRECVD: mod 12: <You can now reset the module>
47w1d: SP: The PC in slot 12 is shutting down. Please wait ...
47w1d: SP: PC shutdown completed for module 12
Jul 13 18:38:35: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Reset)
Jul 13 18:46:04: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Module Failed SCP dnld)
Jul 13 18:53:54: %OIR-SP-6-REMCARD: Card removed from slot 12, interfaces disabled
Jul 13 19:01:28: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Module Failed SCP dnld)

> *** ERROR => ThInit: db_connect (step 1, th_errno
> 13, action 3, level 1) [thxxhead.c   10156]
Is your database running (mounted and open)?
Markus

BPC 7.5 upgrade process - Doubts

Similar Messages

Maybe you are looking for