BPC 75NW: Using GetOnlyRange, data is still being submitted

Hi ,
I am using an Input Schedule with two EvDREs. Both the EvDREs are supposed to send the data and both are static EvDREs, without any expansion ranges. I don't want data to be sent for some of the portion of the template. I included that area in the GETONLYRANGE, but the data is still being submitted to the Application. I have used various excel CONCATENATION functions to finally provide a long string of ranges in the GetOnlyRange. The EvDRE status is OK.
Also, in the same template, when I refresh and hit the submit button just after refresh, it is still trying to submit the data.
Not sure whats happening here exactly.
Please help.
Thanks,
Abhishek
Edited by: Abhishek Khatti on Jan 28, 2012 2:58 AM

Thanks for the reply Vara.
Yes, I was using EVRNGs.. Seems like there is a limit to the number of ranges that we can define in the GETONLYRANGE. I limited the number of EvRNGs and that worked perfectly fine.
Thanks,
Abhishek.

Similar Messages

HT4203 I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this. Thanks.

I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this.

I assume you are including the STIX font as part of your epub files?
Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

HT4528 since downloading ios 7 mY phone says that im connected to my hot spot but all of my data is still being used over my cellular network. Prior to the download i had a symbol showing that i was connected to wifi. now i only see LTE. Please advise!

iphone 5 not connecting to hotspot after ios 7 dowload. pLease advise

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

HT1725 I purchased an episode of the tv show Hannibal. Attempted download. Said download was completed yet received only a 30 second trailer of the episode. Tried 4 times, used 5GB data and still don't have the episode on my iPad.

I purchased an episode of the tv show Hannibal. Paid, downloaded to iPad but received only the 30 second trailer for that episode. Attempted 3 more times, used up 5GB of my monthly data allowance and still continued to get nothing but the trailer.

Hello Pamela1958,
Thanks for the question. It may be best to report an issue with your purchase. The following article outlines how to do so:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks,
Matt M.

My old boss is using info that is still being sharded with the mac i used. She is violating my privacy. How can I disconnect with that computer. I do have its serial

I quit my job 5 weeks ago and just found out that my old boss is reading all my text, email, facebook, etc on my macbook air that I used while employed. How can I stop sharring info with that computer.I have its serial#, etc

Change the password on your iCloud account and on any other email accounts.
If you had Find My Mac setup on the Mac Air you could log in to your iCloud account at iCloud.com, go to the Find My Mac section and either wipe the Air clean or lock it.
That's pretty drastic and might bring consequenses.
OT

Po approved but still being submitted for approval

Can you please explain how to stop the approval requests for PO? Approver keeps getting prompted to approve after he’s already approved this. Thanks!

Hi Mari,
Please check under what condition the PO Approval request is being sent now. If its BSP Workflow or non-BSP Workflow.
If the condition is not satisfied then it must be going for the further Approval.
Else give the details on which you are sending the Approval Task for the PO Approval.
Regards,
Jagan

How to use srcpac? Is it still being developed?

srcpac and srcpac-git don't work for me, but another user claimed it works just fine. Can anyone please point out what am I dong wrong?
srcpac-git has e.g. an updated manpage, but still doesn't work
$ cat /etc/srcpac.d/less
s#--prefix=/usr#--prefix=/usr/local#
$ srcpac -So less
sed: can't read /var/abs//less/less/PKGBUILD: No such file or directory
This is the example from the manpage.
Is it still being developed? Can I flag it out of date? Why hasn't it been released in over a year, even if the git version has some improvements?

Hi Community,
quickly before i leave the office for today:
an experienced user proposed a workaround with the WB_TO_DATE function, that i previously overlooked. It validates and can be queried with IS NULL.
He mentioned, that the expression might be in a SQL-only part of the OWB-code. But wouldn't this mean one should be able to use if instead of Case?
Hoping for some clarification,
Marc

If you start downloading a song on your iphone and it says downloading error tap to retry and you don't tap it does it still use your data?

i started to download a song on my iphone and it said 'downloading error tap to retry'. i never tapped it but i was just wondering does it still use my data?

but nothing is downloading because i never pressed tap to retry so does that still use data?

HT201412 i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place, please HEL

i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place. however when i disconnect from the charger it switches straight off immediately. it also just flashes up the apple icon (on 10 seconds, off 10 seconds.......) when i connect to either car charger or computer. it also resets itself every single time i turn it back on using the mains charger. please help me understand what is happening to my phone
is there anything apple could do if i took it to one of their main shops???
Kris (bulzy_23)

Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced.

Error: The logical component X is still being used

Hi,
In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
Please help.
Many Thanks,
Mohan.

Hello Mohan,
You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
Best regards,
Peter

I was using iphone4 and iphone5 as well,i want to use two different apple id but dont want to loose the apps and data's .I still want to use same datas but with different id is it possible ..?

I want to create new apple id, but dont want to loose existing data's downloaded using existing id.I still want to use two apple id

No. All apps purchased are forever linked to the original ID and there is no way to transfer them.

Theft of phone and skype account still being used!...

Hi.
My wifes phone was stolen on th 19th of April during a camping trip.
We reported the theft to the police.
I have gone onto skype today, and the account is still being used.
My wife said the only two places skype is installed is on her stolen phone and on her laptop, which isn't on at the moment as she is at work!!
So whoever stole the phone is using the skype account right now!!!
I need to find out the IP addresses that have been logged against the user [Redacted for privacy] since the 19th of April.
I have tried to email support, but the contact form keeps giving an error, so please someone respond as soon as possible so I can relay info to the police please!!
Kind regards,
Glenn.

Hi, Glenn, and welcome to the Community,
These two commands, when entered into a chat window, may prove helpful:
/remotelogout
Sign out all other instances except the current one. This will also stop push notifications on all other instances.
/showplaces
Lists other instances where this Skype name is currently signed in.
Important: Always make sure you are using the latest version of Skype. Some of these commands may not be supported in older versions.
Here is a link to the original FAQ article:
https://support.skype.com/en/faq/FA10042/what-are-chat-commands-and-roles?
If your wife still has access to her account, she should consider signing on to her account details and removing any saved payment methods on file.
Skype does not release IP addresses except upon request from law enforcement agencies, who can file to receive this information via official channels.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Is code still being used

We have a large database, with many stored procedures, packages, functions and views that have built up over such a long time that we no longer know which code is still being used.
Is there any way of finding out if a procedure/package/view/function has recently been executed.
The only way I could think of was to take away the privileges and see who shouts... but that's probably not the best idea.

Find objects, that don't have other objects dependant on themDepending on how the database is used, this may or may not prove anything. Procedures that are called from SQL*Plus sessions or DBMS_JOBS wouldn't show up. Searching the text of your front-end application may be a chore as well.
A similar caveat apllies to trawling the cache. You'd want to make sure you didn't drop procedures that are run once a month or once a quarter or once a year.
In the absence of adequate documentation the only sound approach is to keep everything. Punishing your users - by removing their rights - for the incompetence of the support team is so wrong.
Why do you want to get id of somne procedures? They are not like tables, they don't take up much space. Procedures that are not run don't have reported bugs, so they don't generate much additional work. The only issue I can see is when you have to do global work e.g. upgrading the database or applying some generic fix. That is additional work, I agree, but that's the price you have to pay for not having properly documented applications.
We all do this (or rather don't do this) and we all end up having to do work we suspect is unnecessary but can't prove that's the case. Do we learn? Heck, no.
Good luck, APC

HT1391 Can a stolen Iphone be traced by using the serial number to see if it is still being used. I have had the handset locked but have been told it can be over ridden.

Can a stolen Iphone be traced by using the serial number to see if it is still being used. I have had the handset locked but have been told it can be over ridden.

No.
Contact yoru carrier. They may be able to blacklist it.

TS3772 On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

Hello steveod2
The main thing to do is to sign out all services on your iPhone, like iCloud, iTunes & App Store, iMessage and FaceTIme. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

BPC 75NW: Using GetOnlyRange, data is still being submitted

Similar Messages

Maybe you are looking for