BPC BW connection details...

Where do mention..that BPC development systemm( XXX) number need to be connected to BW system number(XXX).
I know for BW >ECC connection details are mentioned in the SM59 transaction code..
But just trying to know how this works for BPC>BW connection details..

Hi Doodwala -
The BPC (version for Netweaver) system is collocated within the BW system...they are one system. No connection between BW systems are required,
The architecture of the BPC does require a .NET server connection however, and that server must be connected to the BW system. For details on how this is done, please see the BPC installation guide at:
[https://websmp105.sap-ag.de/instguidescpm-bpc|https://websmp105.sap-ag.de/instguidescpm-bpc]
Regards,
Sheldon

Similar Messages

Error when running Dashboard with BPC 10 Connection

Hello Experts,
I am trying to preview my created Dashboard with BPC 10 Connection. Upon clicking Preview I encountered an "UnSupported Excel Function" error.
When I clicked OK and tried to refresh my report, another error came up:
Have you encountered these errors before?
Thanks!
Regards,
Joana

Hi Joana,
Please refer knowledge base article 1741089 - Dashboard design error message: Unsupported Excel function EPMOlapMember - which says the same:
Cause
This is normal product behavior. Only native Excel functions which are
supported by Xcelsius should be used for generating the dashboard.
The embedded spreadsheet does not support all Excel functions. It does not
support macros, conditional formatting, linking to other external spreadsheets,
and some formula functions.
Resolution
Use only functions that are supported by Dashboard Design (Xcelsius).
For a full list of supported functions, see the section Supported Excel
functions in the Dashboards and Presentation Design User Guide available form http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_dashD_user_en.pdf.
Hope this helps.
Regards,
Kalyan.

DSL on Internet off - possible connections details...

Hi,
I'm having an issue where I have synchronization with the exchange but have no internet connection.
Checked for noise on the line and it is clean, the router is saying the ISP is not reponding to PPPoE packets which would suggest this is a settings issue...
have the connection details changed?
I have tried all the different settings I could find via google and nothing has worked, have also waited for 3 days to see if it was an exchange end problem, still down and status page says everything is fine in my area.
For completeness here are the connection details I have had for the last year or so:
Annex A
UserName: [email protected]
password: blank
VLAN: 101
VPI: 1
VCI: 32
encapsulation: PPPoE
DNS is provided by ISP
The router itself is a Fritz!Box 7390 running Fritz!OS 6.06
I have also tried with no VLAN and with VPI: 0 VCI: 38 and every combination thereof...
Have I missed something?
Thanks
Mako
Solved!
Go to Solution.

Turns out the issue was as simple as a firmware update, had quite an old version.
So for google searches Fritz!box 7390 routers need to update to Fritz!OS 6.20 and the issue is solved.
Might have something to do with G.INP as that never showed up in the old firmware.
Regards
Mako

LDAP list of DB Services contains duplicate name, with wrong connect detail

Sqldeveloper 2.1.1.64 (running on Vista, or Linux)
Using LDAP to define a db connection, connection to the ldap server is successful and returns a list of ~360 database entries.
Within this list 2 database names appear twice with the next db name is missing. Of concern is the connection details supplied with the database
are for the next (omitted) db!
The work around is to use the basic connection type when defining the 4 databases.
Is this a known problem ? Is there a fix available ?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Changing database connection details aftre WAR file deployment

Hello,
I create a WAR deployment file and distribute this to a Tomcat web container. The package unpacks as expected however the production database details are different from my devlopment environment. The database connection name is the same. I thought if I simply change the connection details in the connections.xml file and restart the web app this would do the trick. It does not. What am I missing?

Maybe your application is using a connection as defined in data-sources.xml. Check there.

Connection details using SQL

Is there any way to find the connection details using sqlplus once a connection is made to the database. I would like to see the information similar to what I get while using the tnsping .

Hello Mate
If you can connect as a system , check the V$instance command.
or type show user in sqlplus
Regards
Harshad

Can we connect to any SAP system if we have connection details.

Hi Experts,
Can we connect to any SAP system if we have connection details.
In this thread I found Diego Lombardini asking connection details.
Needed help on this report
I am working in ABAP for couple of years but donu2019t have much idea about connection to SAP system, Please let me know how it is possible .
High points will be rewarded for any helpful answer.
Regards
Bikas

Hi Bikas,
That reply is just because Diego got irritated by Ravi asking the same question in many threads many times .
Otherwise if a SAP server is not secureed using secureclient you can always connect to that SAP system using the internet and your own SAP GUI ( perhaps based on the GUI compatibility )
But i bet, nobody will reveal SAP server as open for you.
Cheers
Kothand

Connection Details - How to

What is the best recommended approach for defining, storing and maintaining passwords for connections?
We are working on a product development using Oracle ADF 11g and would like the system to have capability to connect to one or more database and other servers at the client site(s). For development purposes, we specify the connection information in Jdeveloper, but do not believe that this approach can work in a production scenario, especially where the solution requires to be deployed at multiple sites.
This could be applicable for database connections, application connections, webservices etc.
Appreciate your inputs.

Assuming you're using ADF BC under JDev 11g, then the trick is to use a "JDBC datasource" that maps to a JNDI datasource on your WLS server. Effectively it's a named resource on the server that has all the db credentials, can be setup by developers easily on their integrated WLS, and easily with separate db connection details under test/prod etc. In this way you're not deploying the unsecure details, you're in fact hooking into a resource preconfigured on the JEE server.
See the following section in the ADF 11g Dev Guide:
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcservices.htm#sthref801
Cheers,
CM.

Hi All, I am trying to install informatica 9.1 HF 2 connecting to 11g DB. when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB. The DB is running any id

Hi All,
I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
The DB is running
any ideas?
the error message states:
THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
thanks

Yup, that did it.
I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
Thanks.

BPC 10NW: Connectivity issues with environment copied from IFRS KIT

Hi BPC Gurus,
We are on SAP BPC 10NW SP04.
We had installed IFRS Kit. We then copied IFRS Kit (without transactions) to another environment (TBSC_DEMO). We have then
modified members of all the dimensions and successfully processed it.
We are trying to log on to Consolidation Model in BPC-Excel to create Transformations etc ... however, we are getting error "the number of bytes available is inconsistant with the HTTP content - lenght header. There may have been a network error or the client may be sending invalid requests'. However, it gets connected to 'ownership' and 'rate' models without any issues.
Also, if we try to create an Input Form and/or Report from BPC-Admin, and drag any dimension in Row / Column it throws an error - 'unhandled exception has occured'.
NOTE: It was given to understand from one of the SAP consultant that IFRS kit has some 'KNOWN issues' about 'authorizations and/or security features. could you please let us know the resolution at the earliest?
ALSO, If by any chance we are able to conenct to BPC-Excel, it shows only one dimension (ACCOUNT). Please see the attached screen shot for more details.
Are we missing any settings?
Please assist.
Regards,
Rashmi

Hi BPC Gurus,
We are on SAP BPC 10NW SP04.
We had installed IFRS Kit. We then copied IFRS Kit (without transactions) to another environment (TBSC_DEMO). We have then
modified members of all the dimensions and successfully processed it.
We are trying to log on to Consolidation Model in BPC-Excel to create Transformations etc ... however, we are getting error "the number of bytes available is inconsistant with the HTTP content - lenght header. There may have been a network error or the client may be sending invalid requests'. However, it gets connected to 'ownership' and 'rate' models without any issues.
Also, if we try to create an Input Form and/or Report from BPC-Admin, and drag any dimension in Row / Column it throws an error - 'unhandled exception has occured'.
NOTE: It was given to understand from one of the SAP consultant that IFRS kit has some 'KNOWN issues' about 'authorizations and/or security features. could you please let us know the resolution at the earliest?
ALSO, If by any chance we are able to conenct to BPC-Excel, it shows only one dimension (ACCOUNT). Please see the attached screen shot for more details.
Are we missing any settings?
Please assist.
Regards,
Rashmi

Failed to open the connection.Details: [Database Vendor Code: 17 ]

We have too many reports designed by Crystal Reports XI Release 2 a time ago reports are old but we are calling them in asp.net 4.0 and connection through ODBC Data Sources (Driver SQL SERVER)
but when we refresh the report we are facing this issue....
Failed to open the connection.
Details: [Database Vendor Code: 17 ] Failed to open the connection.
AP Outstanding Check Run Detailed Ver 2 {CF3B13A2-F259-4B1D-ACC9-BF78F44D4AA5}.rpt
Details: [Database Vendor Code: 17 ]
here is the code to set ReportLoginInfo
CrystalDecisions.Shared.TableLogOnInfo logonInfo = new CrystalDecisions.Shared.TableLogOnInfo();
            string myTableLocation;
            foreach (CrystalDecisions.CrystalReports.Engine.Table myTable in rptDoc.Database.Tables)
                myTableLocation = myTable.Name;
                logonInfo = myTable.LogOnInfo;
                logonInfo.ConnectionInfo.AllowCustomConnection = true;
                logonInfo.ConnectionInfo.ServerName = ServerName; // dnsname
                logonInfo.ConnectionInfo.DatabaseName = DatabaseName;
                if (!(string.IsNullOrEmpty(UserID) || string.IsNullOrEmpty(Password)))
                    logonInfo.ConnectionInfo.UserID = UserID;
                    logonInfo.ConnectionInfo.Password = Password;
                    logonInfo.ConnectionInfo.IntegratedSecurity = false;
                logonInfo.ConnectionInfo.Type = CrystalDecisions.Shared.ConnectionInfoType.SQL;
                myTable.ApplyLogOnInfo(logonInfo);
                myTable.Location = DatabaseName + ".dbo." + myTableLocation;
                bool success = myTable.TestConnectivity();
Edited by: zeshansadiq on Nov 4, 2011 3:49 PM

resolved by me itself.
Do the following steps:
1. Open the report in the CR XI designer.
2. Select Database -> Set Datasource Location.
3. Set Datasource Location window will appear and in the replace with section connect to the database and replace these tables with the tables in the current datasource by clicking the update button.
4. After updating close the Set Datasource Location window.
5. Go to 'Database menu' and Click 'Verify Database' and click on u2019OKu2019.
6. Preview the report and the save the report.

BPC cannot connect to ABAP server

Hello Experts,
I'm facing the following issue when installing SAP BPC NW 7.5 SP04
When the installation is done (succesfully) I try to login to the server manager and get following error message:
"Cannot connect to ABAP server; Check your ABAP server configuration"
In the diagnostic, it is also the SAP ABAP Server connection that fails.
I'm installing this with a domain user called BPCADMIN.
In the ABAP system I added this domain user to the UJA3_WRITE_SYS_USERS program.
When I check the table: UJA_SVR_DEFAULT I see 3 times the domain\BPCADMIN user.
In the log file I get following error:
#2.0 #2010 09 03 01:35:41:020#-7:00#Error#ServerMgrService##EPM-BPC-NW##0d55515b-753b-449a-9a0f-1d3781e38f69###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:40:49:608#-7:00#Error#ServerMgrService##EPM-BPC-NW##b22778de-4872-4138-a700-26cd9f8b0d68###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:41:11:327#-7:00#Error#ServerMgrService##EPM-BPC-NW##38dad74d-47bc-48c0-a779-dc5fd2f1ef92###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
Strange enough, a ABAP connection with SAP LOGON works...
Can you please help me on this?
Thanks!
Erwin

HI,
I checked the 3 BPC SAP ID (BPC_SYSADMIN; BPC_ADMIN; BPC_USER). They are not locked.
And all of them are communication users. I set the rules according to inst. guide.
I run the UJA3_WRITE_SYS_USERS program too.
The UJA_SVR_DEFAULT table contains these lines:
ADMIN -> BPC_ADMIN
SYSADMIN->BPC_SYSADMIN
USER->BPC_USER
I tried to login manually with these users, it is OK. (they were dialog users )
(the .Net server and the SAP BI system are not the same machines. I think this is no problem isnu2019t it ) Firewall are off on both machines.
Can I create these users at the .Net server side and login to win server with them?
I set these SAP users to BPC server .BPC_ADMIN is the BPC_ADMIN and so on. Is it OK ?
I have no idea what can be the problem.
How can I check they are BPC specified users or not?

EVDESCRIPTION from BPC OLAP Connection

Hello All
We have an OLAP connection to IDT in BI4 for BPC MS 7.5
We had a problem getting the EVDESCRIPTION variable to show when creating WEBI reports so we created a measure for the account Dimension, which works a treat.
<EXPRESSION>[Account].CURRENTMEMBER.PROPERTIES("EVDESCRIPTION")<EXPRESSION>
Although when we try to use the measure for a Hierachy dimension like our Legalentity dim which has three Hierarchies(H1,H2,H3) we get no results from the query in WEBI.
We did change the Syntax to read as follows
<EXPRESSION>[LegalEntity].[H1].CURRENTMEMBER.PROPERTIES("EVDESCRIPTION")<EXPRESSION>
Although we get the desired results when running the query in SSAS we get a 0 when we use the measure in WEBI.
Hope some experts have an idea of what we can do the change our code or what we are doing wrong?
Thanks
Kind Regards
Perven

Hello
We have got passed this issue by creating it as a measure and using it in the query for the dimension.
We created the measure with the expression "[dim].currentmember.properties("EVDESCRIPTION")".
Works perfectly.
Hope this helps.
Regards
Perven

Error when access EP - Dispatcher running but no server connected- details

Hi every body:
I have problem when I try to access SAP EP with URL: http://192.168.122.82:50000/irj/portal
I tried to activate the debug remote, I access on configTool and on the section of process node I activate the options of debugabble, enable debugable , restricted load balancing.
Then I apply the changes and restart the services and my SAP EP didn't run. I try to deploy my app on NWDS and the it can't connect with vm and check whether the SAP J2EE Engine is up and running.
All the services are running.
Then I try to revert the configuration of debug to try deactivate the options, apply and restart the services but my SAP EP get the error:
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
Details: No details available
All the services are running.
I post this on the thread, where I post some details
SAP EP Error: Dispatcher running but no server connected!
But I find a detail on dev_serv0.log
And I saw a difference on this attribute:
On SAP EP DEV
DLoadBalanceRestricted=yes
Djstartup.debuggable=no
And SAP EP QAS
DLoadBalanceRestricted=no
Djstartup.debuggable=no
And I check the configuration on SAP EP DEV and the checks of debug and restricted load balance are inactive
I think that this atribute no change, how can I change this attribute. ???

Hi Jesus,
Please check the service in SAP MMC are running or not. if not running, then you need to check the log file to identify the root cuase of the issue. If it is running fine then update the host and ip address in the host file and acces the portal with fully qualified domain name (fqdn) like http://<host>:<port>/
Best Regards
AJ

BPC database connection error during the installation of sp08 BPC 7

Hi,
I am installing BPC 7.00.8 on window 2003.
After installation i found an error in database connection.
BPC logg showing
==============[BPC Exception Logging]==============
[Message Type] : ERROR
[Job Name]     : Log initialization
[DateTime]     : 11/2/2011 10:30:25 AM
[UserId]       :
[Exception]
    DetailMsg : {Unable to load DLL (librfc32.dll).}
==============[BPC Exception Logging End ]==============
==============[BPC Exception Logging]==============
[Message Type] : TRACE
[Job Name]     : Log initialization
[DateTime]     : 11/2/2011 10:30:25 AM
[UserId]       :
[Exception]
[Context]       :
<Context>
<AppSet>
</AppSet>
<UserID><![CDATA[JETAIRWAYS\isdhlpdsk]]></UserID>
<App><![CDATA[]]></App>
<Language><![CDATA[]]></Language>
<Session>
<SessionID><![CDATA[]]></SessionID>
<Machine><![CDATA[]]></Machine>
<ModuleName><![CDATA[]]></ModuleName>
</Session>
<CurrentView>
<Dim>
<Name></Name>
<Value></Value>
</Dim>
</CurrentView>
</Context>
[Parameter]       :
[Security]       :
    DetailMsg : {Unable to load DLL (librfc32.dll).}
[Stack Trace]       :
        at OSoft.Services.Common.ApplicationServiceProxy.GetUserLanguageProxy.getABAPUserLanguage()
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.init(Hashtable htContext)
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser..ctor(String contextXML)
   at OSoft.Services.Platform.Logging.Logger.getLoggingLevelConfig(String strContext)
   at OSoft.Services.Platform.Logging.Logger.initialize(String strContext)
==============[BPC Exception Logging End ]==============
==============[BPC Exception Logging]==============
[Message Type] : ERROR
[Job Name]     : TestConnection
[DateTime]     : 11/2/2011 10:30:25 AM
[UserId]       : JETAIRWAYS\isdhlpdsk
[Exception]
    DetailMsg : {Exception of type OSoft.Services.Common.ApplicationServiceProxy.ApplicationServiceException was thrown.}
==============[BPC Exception Logging End ]==============
Please help to resolve this error.
Regards,
R Mav

Hi R Mav,
Did you install SAP Gui 7.1 or 7.2 on your server?
KBA 1378741 might have the answer for your issue.
Solution 1: Put librfc32.dll in System 32 folder on server machine and register it.
or
Solution 2: Install GUI on server machine.
BR,
Marcelo

BPC BW connection details...

Similar Messages

Maybe you are looking for