BPC Consolidation Account Dimension - R_ACCT X C_ACCT X O_ACCT X P_ACCT

Hi everyone,
I search for all the forum and I didn't find any explanation about the use of the "standards" accounts on BPC, we are using BPC 7.0 for NW.
Why BPC NW differentiate the dimensions depending on which application are going to be included?
For example BPC NW has four dimensions for the account C_ACCT(consolidation), R_ACCT(rate), P_ACCT(Planning) and O_ACCT(Ownership).
In our consolidation project we have the planning front too so at the end we will have only a group chart of account for both.
Can we maintain only an account dimension or is there a technically requirement to mantain three or more account dimensions?
One for Legal App, one for Ownership App, one for Intercompany Matching App and one for planning?
So we should have to use same dimension, an example the C_ACCT, on all application or we have to use each dimension in their owing application and change them with same data? That's the question.
Could someone explain what would we do in this scenario? Please don't send documentation because on every one we read are saying to use different, but how is the maintenance for that, explain this.
Best Regards
Alexandre

Hello Alexandre,
You cannot use the same account dimension in all these applications, because the Rate and Ownership applications are designed to store currency conversion and ownership related data, so it would make no sense to add a financial chart of account to these applications. You could however use the same CoA between your Consolidation and your ICMatching, the idea to have two different ones is that you only have Intercompany data from some of your accounts and you may also want to use different roll-ups of your account to perform you IC Matching.
Here are the 4 account dimension:
- R_ACCT used in the Rate application, contains type of rates (like "END", "AVG)
- O_ACCT used in the Ownership application, contains method and percentage of consolidations (like "METHOD","PCON","POWN,...)
- C_ACCT used in the consolidation application, containt the financial Char of Account (Balance Sheet, P&L, ...)
- P_ACCT used in the planning application, contains account specific for Planning.
You could share the same CoA between your Consolidaiton and Planning, as long as you can defined a common one that fits both purposes
Marcel

Similar Messages

Account Dimension - P_ACCT ; O_ACCT; C_ACCT

Hi everybody.
I am starting with bpc.
I am using bpc 7.5 for Microsoft.
Many tutorials I'm following says to create an application, like Finance Application, and keep in the application the Account dimension.
My doubt is that instead of Account dimension, appear three other dimensions: P_ACCT ; O_ACCT; C_ACCT.
In older versions of bpc, the Account dimension was one for the 3 different things (planning, owner and consolidation) ?
So, if I want to create a Finance Applicantion, I'll have to include this 3 dimensions in the application?
Thanks a lot.

Hi Gisele,
In pre 7.5 AppShell each of the applications had separate account type dimension which were named differently. In 7.5 the naming was made a bit more readable - the prefix stands for application and the suffix indicates the dimension type.
You probably may want to look at the P_ACCT dimension as it is used inthe Planning application which is the Financial app counterpart in 7.5.
Best,
Madis

How to hide member Account dimension from BPC Administrator for Reporting

Hi experts, i need to hide some members of the Account dimension for reporting, because those members dont use it anymore, but i dont want delete them.
The question is: Does it exist any propierties for this dimension type that allows hiding members in reporting without set members in the BPC for Excel?
I can create a report which contain the members i want to show, but if any change occurs (client desire) the report is outdated.
Thank you in advance
Ignacio Vazquez

Ignacio,
There is no function like that.
You can choose below two options.
1. Create a property like 'NOUSE' and set a value 'Y' for unused member
When you create EVDRE report, set a filter against that property that has value 'N'
then those members will not be shown at the report.
2. Create 'NOUSE' parent member and put members under this parent member.
Maybe option 1 is more easier to do that.
I hope it will help you
James Lim

Error Processing "Account" Dimension in BPC 7.5

Good Afternoon,
I am having difficulties processing the account dimension from the Admin function. I can not save to server or process dimension. I get the following log error message. This is impeding my ability to add or change account information. I recently was on maternity leave for 3 months and I am not sure if it is a combination of inactivity coupled with a new PC? I have recently been provided with a new laptop, which I am unsure is configured properly.
#2.0 #2014 06 16 16:33:25:890#-4:00#ERROR#AdminConsole##EPM-BPC-MS##93e2c386-f594-4157-8c44-c6a3d727f3b7###FormMain::SetExeAction#CORP\\jfesterman########Plain##[LOG ID:18]System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[ Arguments, Boolean[] CopyBack, BindingFlags Flags)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.CallMethod(Container BaseReference, String MethodName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, BindingFlags InvocationFlags, Boolean ReportErrors, ResolutionFailure& Failure)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, Boolean IgnoreReturn)
   at OSoft.Consumers.Admin.AdminMain50.FormMain.SetExeAction(String strCodeID, ArrayList arrReturn)#
We are running BPC 7.5 on a SQL 2008 server, and I wanted to check with the blog before Uninstalling and reinstalling the BPC osoft 7.5 application.
Previously, on my old laptop, I had this capability, and I can run and process all the other dimensions in our list via the Admin feature. I have also tried to refresh dimensions via the BPC EMP add in, and that seems to not throw any error logs, so I am unsure as to what my next step should be.
Plesae advise if I need additional updates to this new computer or if anyone else has seen this error message.
Thank You,
Jennifer

Hi Jennifer,
if you're unsure that your PC isn't well configured please verify this with the 1678822 - Third Party Software Support Matrix For BPC for Microsoft 7.X, 10.X
Then run client and server diagnostic to see if there are problems.
If all ok the dimension file could be corrupted so please change the name of your xls dim file and try to export your dimension, process it and see if ok, if not check the property in the xls dimension file with the modify dimension property in admin console.
Verify also if this note could be helpful 1905831 - SAP Disclosure Management - Uninstalling DM client removes necessary VBE6EXT.OLB file
Regards
     Roberto

BPC 5.1 account dimension documentation

Hi,
I'm new to SAP BPC and I would like to have information about how to design an Account type dimension.
Is there somewhere I could find a guide?
Thanks a lot.

Hi Hélène MICHAUT ,
If your new to BPC please read the guide below which gives what the account dimension and then based on your requirement then you can create your dimension.
http://help.sap.com/saphelp_bpc70sp02/helpdata/en/a1/532226947C49A5B2E2BD32450CB2D1/frameset.htm......Please find the link...
Hope it is helpful...
Regards,
Naresh.K

BPC cannot read dimension : ACCOUNT

Hi all,
This is the second time we encounter this incident in our BPC production environment.
A user opens BPC Excel, and on launch, there is a popup with the message that the system cannot read the dimension ACCOUNT. The two times it was the same dimension.
After clicking on OK, in the action pane, in place of the account dimension, there is "...more..." and when I click on this (I also reproduce the issue), I cannot see any member in the window.
The only solution I found is to open the administration and manage the members, all seems to be OK except the format of the file. I process the dimension with Full Process and Appset offline, and the correct situation is then restored.
We need to understand what is happening, but I clearly have no idea.
Could you help me please ?
Thank you very much

Some changes into Account dimension were done and it was not performed a full process for that dinmension.
It was just process dimension without full process.
This was the cause of the issue and actually the solution is the one provided by you.
You just have to track the admin processes performed and you will find out what process was not done correct.
Kind Regards
Sorin Radulescu

Error while activating Account Dimension in BPC 10

Hi All,
While trying to activate the Account Dimension, it is giving an error. Please see the screenshot below. Please let me know if someone has faced this issue before and has solved this.
Thanks in advance,
Best Regards,
Venkata

Hi Bhupi -
Go to SU53 T-code from the back end , you can find the authorization issues; It will clearly mention what authorizations are missing in Red.
Hope this helps!!!

Account Dimension not included in Appshel?

Hi experts, just installed BPC NW. It is curious that is not included the account dimension in appshel.
There are others of the same type such as P_ACCT, C_ACCT and O_ACCT. Just curious because many of the papers refer to Account dimension.
Is this a correct or something happened in during the installation.
Thanks
Sergio

Got the answer, reading the doc I noted the Appshel delivered in NW is dofferent that the one on MS.
Thanks
Sergio

How to use one Account dimension for multiple account structures

We are implementing a HFM application to replace two general ledger applications, one being Corporate and the other a new subsidiary. We need to maintain both of the chart of accounts and their unique rollup structures. We are facing the difficulty in attempting to combine the two chart of accounts into one HFM Account Dimension because a few of the subsidiary accounts have the same account numbers but they are meant different things.
Question:
How can we set up two distinct account structures in HFM and also have the subsidiary accounts rolled into the Corporate accounts for consolidation reporting?
Appreciate your help.

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

UPLOAD MASTER DATA FROM SAP GL TO ACCOUNT DIMENSION

hi
how can i upload master data (chart of account) from BW 0GL account info object to BPC Account Dimension ?
how can i upload the hierarchy, there is no hierarchy in ECC for the chart of account

SAP offers free content + documentation in the form of rapid-deployment solutions (RDS).
In the Extended Financial Planning Rapid-deployment solution, there is a module called G/L Financial Planning which includes the full load of SAP-based account dimension from SAP ERP to BPC via BW. This content introduces BPC-based Package Links as a best practice way to load master data (including the account hierarchy and transaction data). You can download the content and documentation from the highlighted page above or HERE.
SAP also offers free training on the EPM rapid-deployment solutions in the EPM RDS Academy 2015 on SAP JAM. If the link to the Academy does not work, please register HERE and SAP will invite you.

Account dimension logic

Hi,
I've hit an issue with the length of my calculation exceeding 255. I'd like to add functions to the mdx logic library, but can't seem to figure out the best way to edit the file. I can see that there are logic files in the adminapp folder for each application, however I'm not sure how to edit and validate it. Is there an easy way to edit the files in this folder through the BPC Administrator tool?
Kind Regards,

Great - thanks. I've actually created a copy in my LegalApp and edit it through the Script Logic section and after validating I copy back into the AdminApp Folder - possibly not the best method, but it works at the moment.
Can anyone tell me how to include a calculation in the Account Dimension that is based on another calculation? As far as I am aware the solve_order is only for across dimensions. How do you manage solve order within a dimension? I have a Tuple that I want returned and I then use that account member in another account calculation. When reviewing the results the first calculation returns the value that I expect, but it seems that at execution time the first calculations result does not exist when calculating the second calculation so I get a zero result.
Any ideas? At the moment I am creating a fairly large calculation that recalculates the tuple in the second calculation, but I'd like to avoid this.
Kind Regards,
Fiona

Account dimension hierarchy text nodes ACCTYPE property

Hello,
We have master data being populated into BPC from BW. So for the Account dimension in BPC, we use the 0GL_ACCOUNT infoobject in BW. This infoobject also has all the Financial statement version hierarchies which are being loaded to BPC. The question that I have is, how should the hierarchy text node values for ACCTYPE property be populated if I have to automate this load on a daily basis.
For the actual GL accounts, we have the account number ranges defined. Like 1* series accounts are Assets etc..So we can easily define a rule for populating the ACCTYPE property values. But not sure if there is any easy logic for populating the hierarchy text nodes as we dont have any pattern in them. Would we need to maintain it manually always?
Thanks
Gaurav

Hello Richard,
If there is really no logic behind them there is off course no way of automating this. Then I guess you will have to maintain each node separately.
Some customers are also willing to change their text node structure. For example I had one when where the rules for the 0HIER_NODE records were as follows:
*           EXP -> Starts with 32*, 311*, 312*, 321*, 3111*, 3112*,
*                  3142*, 31111*, 31112*, 311111*
*           INC -> Starts with TOT, 3000000000, 3100000000, 313*,
*                  322*, 3113*, 3141*, 31113*, 311112*
*           AST -> Starts with 1*
*           LEQ -> Starts with 2*
Kind regards,
Christophe

Account Dimension not showing all members in the cube in Analysis Services

Hi,
         In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
         The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
Thanks
Sharath

Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

Using HS.Exp function to write data to a Consolidated Account

Hi,
Just wanted to know whether i can use the HS.Exp function to write data to a consolidated account?
Thanks

Hi Mau,
In order to write data to a consolidated account, you can use HS.Exp function in rules which puts data into a combination of Account, ICP, and Custom1...4 members. The syntax is: HS.Exp "DestPOV = Expression"
You might find useful the HS.Con function which puts data into the [Proportion] and [Elimination] Value dimension members and can also be used in Consolidation rules. The syntax is: Call HS.Con ("V#[Elimination]",-1*dPCon,"")
Regards,
Thanasis

Issue Processing Account Dimension When Number of Levels Decreases

Hello.
We have an issue processing the account dimension. It started at 8 levels, then decreased to 6 levels. However, the processing errors out. If we add some dummy members to bring it back to 8 levels, then it process fine.
Any ideas?
Thanks, Nancy

Hi Nancy,
the numbers of levels is not important.
I think the changes done into your dimensions are wrong and adding dummy members is doing correction of that error.
To be able to understand the issue I need to know what version of BPC are you using and it will be good to see also the dimension.
Do you have more than one hierarchy?
Regards
Sorin Radulescu

BPC Consolidation Account Dimension - R_ACCT X C_ACCT X O_ACCT X P_ACCT

Similar Messages

Maybe you are looking for