BPC DeleteOlapDimFromCube error and Analysis Sevices error (-2147221421)

Attempted to process a dimension in BPC and encountered the following error message:
-DeleteOlapDimFromCube : Item not found in collection
-Dimension is locked because it is currently being used in a cube. Remove the dimension from the cube
Went to Analysis Services and successfully procesed the dimension and all but one of the applications.
Error message recieved was:
Error(-2147221421) Internal error could not update the query log.
Any ides?

It seems for that specific application you have bad data into fact tables or cube is corrupted.
First you have to check the data using query like:
select count(*) from tblfact"application" where "dimension" not in (select count [id] from mbr"dimension where calc = 'N')
this should always provide 0 like result.
If you receive any result <> 0 then you have to delete the records using delete instead of select count(*).
From error message it seem the cube is corrupted.
In this case you have to delete from Management studio the specific cube for your application and after that from Admin console of BPC you have to do modify application with full process and reindex.
This should fix the problem.
After that probably you will be able to any task using that specific dimension.
Kind Regards
Sorin Radulescu

Similar Messages

Error "Unkown Bravo Error" and "Invalid Container Error"

I am trying to render in After effects and keep getting the error "Unkown Bravo Error" and "Invalid Container Error". What do I do to resolve this?

Try using the "secret" preferences to purge every couple of frames. If you hold Shift while clicking on After Effects > Preferences > General, the Secret menu should pop up in the sidebar of the Preferences dialog.
Alternatively, if rendering to a QuickTime with the video codec set to PNG instead of Animation didn't work, try rendering to a PNG sequence and not a video format at all.

CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41)

Msg 2511, Level 16, State 2, Line 1
Table error: Object ID 41, index ID 1, partition ID 281474979397632, alloc unit ID 281474979397632 (type In-row data). Keys out of order on page (1:187), slots 9 and 10.
CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41).
CHECKDB found 0 allocation errors and 1 consistency errors in database 'db_name'.
repair_rebuild is the minimum repair level for the errors found by DBCC CHECKDB (adv_tvs).
Help required on the above error mentioned

Hi Rapunzel,
The minimum repair suggested is repair_rebuild you can try that. As per mssage there is corruption in your database and it can only be corrected by either repairing or Restoring from known good backup.For doing repair the database must be in single-user
mode.
Please read
dbcc checkdb repair_rebuild option
Since DBCC CHECKDB with any of the REPAIR options are completely logged and recoverable, Microsoft always recommends a user use CHECKDB with any REPAIR options within a transaction (execute BEGIN TRANSACTION before running the command) so that the user can
confirm he/she wants to accept the results of the operation. Then the user can execute COMMIT TRANSACTION to commit all work done by the repair operation. If the user does not want to accept the results of the operation, he/she can execute a ROLLBACK TRANSACTION
to undo the effects of the repair operations.
REPAIR_REBUILD does not repair errors involving FILESTREAM data.
How big is database. If it is small and backup also is corruption free you should consider restoring from backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

CDDB error and HTTP processing error

when I try to add a new CD to my library I get CDDB error and HTTP processing errors..... and download will only show the number of tracks and the time each track will play...this only happens on my PC.... and everything works ok on my laptop... I have tried the latest update...and I have compared settings between the two computers but haven't found the problem...

Since a recent update of itunes I cannot get CD track
names from Gracenote anymore. This problem only
occurs on my windows profile and not on other
profiles on the same computer. When I load an audio
CD, itunes recognises it but doesn't name tracks.
When I click on "Get CD track names" in the advanced
menu it starts as normal and then I get a window with
the message 'CDDB Error. HTTP processing Error.' I
have tried a second itunes download, which according
to the install wizard repaired all faults.... still
happening though. I don't have enough time in my life
to type in all the track names! Any help gratefully
received.
Sony Vaio
Windows XP
Solution document found!
Refer to www.info.apple.com/kbnum/n302538
Insert an additional step:
6a. Click on Disable All.
It takes a while to test one or a few items at a time, but it works! If you find these in your Startup list try selecting all and then unselecting these first. One of these was the problem for me but I haven't narrowed it down to one of them yet.
nwiz
SNDMon
dlbcserv
Copy Protection Notifier
Good Luck.
disaacson1
Toshiba Satellite P25 PC Windows XP

Confuse between temp file error and perment file error

during the weekend, i usually maintain our database and this weekend i end up with strange situation,
i lunched my scripts to reorginize datafiles, however the scripts is crash all the time due to weird message which is in my opinion is misleading ora message.
this is the situaion:
i am using this scripts to tell me if my datafiles are full or not
1 L_INDEX 24 107.12109375 103.74609375 3.375 0 96.8493600262553 3.15063997374467
2 L_TABLES 30 108.2939453125 97.1689453125 11.125 0 89.7270341680719 10.2729658319281
as you can see, the free space on the l_index tablespace is now 3G and need to reogrinze to free space, however when we run our scripts to free spaces by moving objects to tools tablespace and then return them back,
I recieve this message:
ORA-01652: unable to extend temp segment by .......
to solve this error is adding new temp files, however we have 5 temps file and there were pantly of space there and also i add 2 new files with size 1g and maxsize is 32G, still i am receving this error and my scripts crash when i try to rebuild the index,
the workaround was is adding new datafile to l_index and try again to rebuild the index and it works,
so i am wondering if the problem was on the datafiles, why i recieved error about temp, i waste some time thinking that my problem was with temp, however the real problem came from l_index tablespace.
oracle verison is 10.1.0.4 and os is windows
Thanks

ORA-01652: unable to extend temp segment by Temporary tablespace is also used when re-creating or creating indexes in database.
A temp segment is created the moment create or re-build indexes command is issued and will be held until the index is being created completely. If either of the tablespace have insufficient space, you might get the error ORA-1652 or ORA 1654.
You should be looking at the tablespace name for adding space instead of looking temp segment.
ORA-1652: unable to extend temp segment by in tablespace

How i can fix "Wiki setting error" and "Running time error" ?

I've found this message when using server app on Mountain lion.
and this error data.
Can i fixed this? Thanks guys!

It so happens that I saw an answer to a similar question today somewere else. I have not tested this myself:
"I have the final solution and fix but beware you may not like it that much.
Having had all of the above problems with more or less everything I finally pieced it all together from various threads. This will fix both the AEBS control and the central services problems. Dont shout at me for being a bit basic and not coding etc. but it worked for me. If I can avoid code I do as often as possible as am less likely to balls it up!
This method will loose some data but the main files and users do remain
The Fix:
1. Close Server.app
2. Library/Server make a copy of Server file under a diff name as software server files and a few others would appear to still be usable and you will have to re download it all again of you dont copy it back in ( I didn't and now have learned my lesson). then delete the whole of the Server file.
3. Go to Keychain and search all Airport then delete associated keys permissions etc
4. Delete Server.app and reinstall.
5. Start new setup and it will migrate properly with no errors. This time a big green tick will appear!
6. Replace the software update files into the new Library/Server folder if you want to or leave it untill the rest is done
7 Reconfigure any missing bits..... any enrolled devices will have vanished but probably if you have saved the data from this in Library/Server prior to deletion you may be able to reinstate this but I didnt risk it
This is going to be a total pain if in a large organisation but once working the system is excellent with no swapping from one control set to the other. As each service is switched on it auto configures the AEBS and no further errors and a joy to work with unless you really like to get into the nuts and bolts.
Hope this helps and good luck"

TestStand Test Environment adapter dll error and Type Palette error

I am new to TestStand and I am having a problem opening a TestStand 3.1 standalone UI application. The UI was built a couple of years ago and others use it within my company without problem. I however get the 3 .DLL adapter errors and the Type Palette errors shown below when I try to open it and I can't figure it out. I have tried everything from uninstalling and reloading TestStand 3.1 and uninstalling the UI application and reloading and it did not fix the problem. I verified that the errored .DLL's are present in the Bin directory and the Type Palette files are present in the Type Palette directory. I asked other more experienced TestStand developers within my company if they have ever seen this or knew what was wrong and they can't explain the errors either. Any suggestions?

Cole - There are probably many differences between my machine and that of my counterparts but they have told me that the only thing I should need to run this standalone TestStand GUI application is TestStand 3.1 and Microsoft .NET Framework which I do have.
The standalone GUI application is a common front end application that we use for a large part of our production testing at my company. It allows us to have a GUI based front end to our TestStand sequences for running testing in a production environment so the operators can see the test running step by step on the screen. We have the GUI application installed on multiple different Production machines (probably over 10) and all are different machines with different software installed on each. the only real common aspect between them that we ensure is that they all have TestStand 3.1, the GUI application, and .NET Framework installed.

Sync "Unexpected Error and must close" ERROR

Tried using desktop 4.6 and 4.3.
New Dell PC with XP Pro
whenever you try to sync data files or configure sync, I get an unexpected error and it says it must close the program.
Any help would be appreciated
Bigweil

Hi and welcome to the forums!
Please specify the following:
Version of Outlook.
Version of Desktop software currently installed.
Model of phone and OS.
Thanks
Message Edited by Bifocals on 11-08-2008 10:43 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Ora-00604 error and ora 01000 error while report generation.

hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.

Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000:     maximum open cursors exceeded
Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

DC Creation Error and Check in Error

Hi Friends
When I am created DC under SC (Software Component) I am getting this warning message. Click on FINISH Button that time I am getting this Warring message. Click on OK Button that time DC will created in Webdynpro Perspective. But I am not unable to see that DC in Under SC. When I have Restart the NWDS that I am able to see the DC under SC.
WarningMessage Development component Creation Completed with some Problems
Reason: Some used DCs are not avaliable locally. you have to sync used DCs for this project.
1. How to Solve the issue?
After I have go to Open Activity Pan here I was do Check in In all ready existing activity. Now the Open activity pan I am unable to see that activity.
Now I am go to Activity Table Here I will refresh and Check it that that activity here also unable to see. That time I am getting this Error
Retrieving pending activities failed: CBS Server Error: The compartment for given software component is being initialized( internal code: BS_SC_META_DATA_NOT_AVAILABLE)
1. How to Solve the Issue?
Please tell me How to solve these Problems?
Regards
Vijay Kalluri

Hi,
The warning message is due to :Some of the used dcs are missing for the respectiveDC.
In NWDS->open the Dc prespective->inactive Dcs->rightclick on the selected Dc and select SynDC->Select all and click ok.
You can also check that,which is your used dc from wd explorer->Expand the project->under used webdynprocoponents
->get the name of the used dc
Import that Dc into your NWDS.
Resync the used DCs.
Regards,
Lavanya.G

SDM password error and go.bat error.

Hi SAP EP gurus..
I installed SAP Netwevaer Enterprise portal(2004s) in my desktop PC. Its installed successfully. Then i started the server also, its also started successfully. Then i installed SAP Netweaver Developer studio in my PC..Its also installed successfully. Then whenever i tried to execute some small web dynpro application its gives error password or username is incorrect. I am using SAP Netweaver 2004s..This i downlaoded from www.sdn.sap.com.I logged in to portal http://sapep:50100/irj ..... It asked me to change the password. I chaged the password also, password is india123 now. This is passowrd i gave to SDM. Its not accepting. I tried to start the visual administrator(go.bat). I am getting an error message that.. The system cannot find the path specified. Program terminated abnormally.Press any key to continue....
if i will press any key..nothing was happening.
Please help me solve this problem ASAP..
Points will be rewarded, for helpful answers..without fail.
Advance Thanks and regards,
Kumar

Hi Kumar,
Here one drawback is there in SAP EP.
If you change password for Administrator in UME, this same password will not work for SDM by default. You have to change it, for that just follow below steps:
SDM Password Reset
==================
Just enter following lines in your COMMAND LINE:
1. enter SDM directory as: cd C:\usr\sap\J2E\JC00\SDM\program
2. Execute the following (just copy-paste)
sdm jstartup "sdmhome=C:\usr\sap\J2E\JC00\SDM\program" "mode=standalone"
3. Execute following line (replacing Password1 with your new password for SDM)
sdm changepassword "sdmhome=C:\usr\sap/J2E/JC00/SDM/program" "newpassword=Password1"
4. I suggest also revert SDM back to integrated mode
sdm jstartup "sdmhome=C:\usr\sap\J2E\JC00\SDM\program" "mode=integrated"
5. Start SDM using commnad as "StartServer.bat"
Reward Points; if it is helpfull.
Thanks,
Nagaraju

Darwin/BSD startup error and second level error

I woke up this morning to find the world as I know it in disarray. My G5 was not booting to its normal screen but to the black ominous Darwin/BSD screen.
I researched this awesome forum and found to login as single user mode (cntrl S)
This led me to the root# where i typed /sbin/fsk -fy
The bottom of this read as:
** Checking HFS Plus volume
** Checking Extents Overflow file
** Checking Catalog file.
diskOs9: I/O error.
Invalid key length
(4,260)
** Volume check failed
localhost:/root#
HELP!
Somewhere in the notes from the first time I did this I saw something regarding an autoshutdown and auto startup. Since this G5 is now in my bedroom I do have those features HOWEVER last night I shut down manually (not system generated) if that even matters.

Hi Jim, and a warm welcome to the forums!
It is likely that only DiskWarrior from Alsoft...
http://www.alsoft.com/DiskWarrior/
The CD version is likely to fix it, but you can try fsck repeatedly ubtil no errors occur.
Possibly...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."

ORA-12560 TNS:Protocol Adapter Error and ORA-12557 Error

Hello ,
I have installed Oracle 11.2.0 64 bit database on my Windows 7 ( Home Premium) PC which is also 64 bit. I installed it because I am trying to setup Informatica. Later, I learnt that informatica is 32 bit and can not communicate to Oracle 11.2.0 64 bit database. So after digging through solutions, someone mentioned that I need to install Oracle 11g client 32bit.
I have installed 11g client software successfully now. Here is problem though :
When I launch SQL-Plus from 11g database , it works fine. However I launch SQL-Plus from 32bit client it gives me error as :
Ora-12560 :TNS: Protocol Adapter Error.
So I have been trying to resolve this error. I saw that this question has been posted many many times and have tried many thing as listed below :
1. copy tnsnames.ora from database ( dbhome_1) to client installation ( client_1 ) under ..\network\admin\ --- Didn't work.
2. Set $ORACLE_HOME and $ORACLE_SID environment variable.
Here is interesting fact - If I set $ORACLE_HOME to database path and not client path error changes to :
ORA-12557 TNS: Protocol adapter not loadable.
If I keep $ORACLE_HOME as client path then I get same error as earlier ORA-12560.
3. I have also tried changing $PATH variable. I did set to path containing only database installation, only client installation, both database and client installation with database installation appearing first
But all of these haven't worked.
Can anyone please suggest what I am missing and any further things I could try ?
Thank you in advance !

982090 wrote:
Hello ,
I have installed Oracle 11.2.0 64 bit database on my Windows 7 ( Home Premium) No oracle product is certified to run on any 'home' edition of any version of Windows.
PC which is also 64 bit. I installed it because I am trying to setup Informatica. Later, I learnt that informatica is 32 bit and can not communicate to Oracle 11.2.0 64 bit database.If the connection is via TNS, the bit architecture shouldn't matter.
So after digging through solutions, someone mentioned that I need to install Oracle 11g client 32bit.
I have installed 11g client software successfully now. Here is problem though :
When I launch SQL-Plus from 11g database , it works fine. However I launch SQL-Plus from 32bit client it gives me error as :
Ora-12560 :TNS: Protocol Adapter Error.
So I have been trying to resolve this error. I saw that this question has been posted many many times and have tried many thing as listed below :
1. copy tnsnames.ora from database ( dbhome_1) to client installation ( client_1 ) under ..\network\admin\ --- Didn't work.
2. Set $ORACLE_HOME and $ORACLE_SID environment variable.
Here is interesting fact - If I set $ORACLE_HOME to database path and not client path error changes to :
ORA-12557 TNS: Protocol adapter not loadable.
If I keep $ORACLE_HOME as client path then I get same error as earlier ORA-12560.
3. I have also tried changing $PATH variable. I did set to path containing only database installation, only client installation, both database and client installation with database installation appearing first
But all of these haven't worked.
Can anyone please suggest what I am missing and any further things I could try ?
Thank you in advance !unfortunately, we need to know exactly how you tried to connect with sqlplus when it "worked" and when it "didn't work". The key to the reported error messages is highly dependent on the environment settings AND the specification of the connect string. A copy and paste of the entire command line session would be most helpful.
But again, running on any 'home' edition of windows is not supported.

How to display FRM Error and corresponding ORA error into alert

hello
I m able to catch FRM Error through ON-ERROR Trigger with help of ERROR_CODE
and ERROR_MESSAGE
Now i want to know how can i catch ORA error (If Exists )Corresponding to that FRM error .
Any help will be grately appricated.
Waiting for Reply......................................

hello
i tried following code but it will not display alert..............
i write following code into .pll file and i called this function on ON_ERROR trigger
but it will not display alert
declare
errcode NUMBER := ERROR_CODE;
     dbmserrcode NUMBER;
     dbmserrtext VARCHAR2(200);
     begin
     IF errcode = 40508 THEN
                         /* ** Form Builder had a problem INSERTing, so
                         ** look at the Database error which
                         ** caused the problem.
                         dbmserrcode := DBMS_ERROR_CODE;
                         dbmserrtext := DBMS_ERROR_TEXT;
                         IF dbmserrcode = -1401 THEN
                         ** ORA-01438 is "value too large for column"
                              g_fun.MSGBOX('Your number is too large. Try again.');
                         ELSIF dbmserrcode = -1400 THEN
                              ** ORA-01400 is "Mandatory column is NULL"
                              g_fun.MSGBOX('You forgot to provide a value. Try again.');
                         ELSE
                              ** Printout a generic message with the database
                              ** error string in it.
                              g_fun.MSGBOX('Insert failed because of '||dbmserrtext);
                         END IF;
     END IF;

Unsatisfied Link Error and creating DLL error

I am having some problems getting my DLL to work properly. I am following the basic Hello World example and seem to be getting a problem.
I am running on Windows XP with, j2sdk1.4.2_04, and using the gcc that comes with Dev-C++ (Bloodshed). The following is the steps I went through.
1. Create a basic Java program.
* Sample program for testing JNI Interfaces
public class HelloWorld
//Define the Native interface
public native void displayHelloWorld( String prompt );
* The following is the main method. It will perform the
* JNI call to displayHelloWorld
* @param args
public static void main(String[] args)
System.out.println("Start of program");
System.loadLibrary("HelloWorld");
System.out.println("Loaded Library");
HelloWorld test = new HelloWorld();
System.out.println("Created Class");
test.displayHelloWorld("JNI Hello World Program");
System.out.println("Called Function");
2. I compile the above program with out any problems
3. I run the command javah HelloWorld and it generates the following header file
/* DO NOT EDIT THIS FILE - it is machine generated */
#include <jni.h>
/* Header for class HelloWorld */
#ifndef IncludedHelloWorld
#define IncludedHelloWorld
#ifdef __cplusplus
extern "C" {
#endif
* Class: HelloWorld
* Method: displayHelloWorld
* Signature: (Ljava/lang/String;)V
JNIEXPORT void JNICALL Java_HelloWorld_displayHelloWorld
(JNIEnv *, jobject, jstring);
#ifdef __cplusplus
#endif
#endif
4. Create the C source file
#include <jni.h>
#include "HelloWorld.h"
#include <stdio.h>
JNIEXPORT void JNICALL
Java_HelloWorld_displayHelloWorld(JNIEnv *env, jobject obj, jstring pString)
printf("Hello world! %s\n", pString);
return;
5. I compile the program using the following command
gcc -IC:\j2sdk1.4.2_04\include -IC:\j2sdk1.4.2_04\include\win32 -c HelloWorld.c
The gcc compiler generates the HelloWorld.o without errors
6. I then try to create the dll using the following command:
dllwrap -IC:\j2sdk1.4.2_04\include -IC:\j2sdk1.4.2_04\include\win32 --dllname HelloWorld.dll HelloWorld.o
The program spits out the following warning
Warning: no export definition file provided
dllwrap will create one, but may not be what you want
It creates the dll succussfully
7. I run the Java program
java HelloWorld and I get the following output
Start of program
Loaded Library
Created Class
Exception in thread "main" java.lang.UnsatisfiedLinkError: displayHelloWorld
at HelloWorld.displayHelloWorld(Native Method)
at HelloWorld.main( HelloWorld.java:25)
So I try to generate the definition file for the dll (I saw from previous posting)
8. I run the following command
dlltool -z HelloWorld.def HelloWorld.o
It generates the following file Helloworld.def
; dlltool -z HelloWorld.def HelloWorld.o
EXPORTS
Java_HelloWorld_displayHelloWorld@12 @ 1 ;
9. I modifiy the HelloWorld.def (as described in other postings)
; dlltool -z HelloWorld.def HelloWorld.o
EXPORTS
Java_HelloWorld_displayHelloWorld @ 1 ;
10. I then try to recreate the dll using the def again using the command
C:\F_Drive\Apps\C_Samples\hello>dllwrap -IC:\j2sdk1.4.2_04\include -IC:\j2sdk1.4
.2_04\include\win32 dllname HelloWorld.dll def HelloWorld.def HelloWorld.o
It gives me the following error when trying to create the dll.
HelloWorld.exp(.edata+0x38):fake: undefined reference to `Java_HelloWorld_displa
yHelloWorld'
dllwrap: gcc exited with status 1
Any help would be greatly appreciated.
thanks

Try the --kill-at flag on the compile line, and don't bother with the .def file, you shouldn't need it.
See http://bleaklow.com/blog/archive/000162.html for a detailed dissertation on how I got this to work for me.

BPC DeleteOlapDimFromCube error and Analysis Sevices error (-2147221421)

Similar Messages

Maybe you are looking for