BPC error after the installation
Hi Experts,
I have completed BPC 7.0 SP2 installation and connected BI 7.0 instance (EHP1 installation completed sucessfully, added BPC add-on). i installed BPC Admin client and connected to APSHELL but when i am trying to create new app set by coping existing one or try to modify any task profiles, i am getting errors like GetTaskProfileData() with object refreence not assigned. log file showing below error.
==============[BPC Exception Logging]==============
[Message Type] : ERROR
[Job Name] : ReleaseAllLockOfUser
[DateTime] : 2/26/2010 2:25:35 AM
[UserId] : SYNOPSYS\venkatrd
[Exception]
DetailMsg : {Method OSoft.Services.Webservice.FileAccessService.FileAccessService.ReleaseAllLockOfUser not found.}
==============[BPC Exception Logging End ]==============
please suggest on this bcoz i stuck up in the middle of this task.
thanks
Venkata
Hi All,
thank you all for your valuable time for me.
i am able to trace out the issue, this was cuased with "Message Queue" format, i followed as per the installation document like queue name is Private$\bpcmessagequeue , it went fine last installation and worked fine.
but this time, i have given same format but system configuration file has taken into wrong format and unable to read task status from queue cuased the issue. i have correct using below format.
<HOSTNAME>\$Private\bpcmessagequeue, this format for remote queue, but even requesting same format for local queue also.
anyway thank you all once again for your efforts.
thanks
Venkata
Similar Messages
-
ORA-012203 error ----after the installation of forms 10g
I have forms6i in C: and installed forms 10g in other drive....but now when i am trying to connnect forms6i application i get this error ORA-012203 Unable to connect to destination
i have even seen this thread but it did not help much
Re: Forms 6i - ora-012203 tns:unable to connect to the destinationOnce you locate all of your TNSNAMES.ora files, identify one as your main file. Make sure all of your connections are located in this file and are correct.
Then go to every other TNSNAMES.ora file and replace everything in the file with ifile=<directory_path/filename>
For instance, mine is:
ifile=C:\DevSuiteHome_1\NETWORK\ADMIN\tnsnames.ora
Now you only have to maintain one file for your multiple tools
Edited by: ChrisBaker on Jan 4, 2010 5:59 AM
I used this to check whether this solution works or not......after i tried the abv sol ... i dont ger ora -012203 but i get ora 012154 -TNS:could not resolve the connect identifier specified... i have checked my tnsnames.ora n everything is right in it -
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
What can I do to repair error -42110 after the installation of your solftware update to version 11.0-2-25 ?
http://support.apple.com/kb/TS1424
http://support.apple.com/kb/TS3297 -
Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation
Hi Friends,
After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.
-
Who kills your iPod after the installation of iPod updater?
Hello all,
First, sorry for my poor English. I am not a professional nor a technician and I could be wrong, so please correct me. There are many problems reported mainly from the PC users that their iPod can't be recognized nor mounted after the installation of the latest iPod updater. Most of them claimed that the iPod updater kills their beloved iPods. Before we jump to a conclusion, we must understand what is iPod, and how does the iPod update work.
I believe that iPod equals a basic computer and need a OS in order to communicate with the PC. Installation the Updater will format the Hard disk of the iPod and then install the simple OS, so if we open the iPod updater file, it will show a window with two buttons i.e. Restore and Update, an Update is to copy the latest OS over the old version, but the Restore will format the hard disk before it install the OS over it. And importantly, during this process, the iPod needs sufficient of power to complete the upgrade, however, the problem comes just after the format, and the PC's USB (only 2 will work not 1.1) does not supply the stable power,even some cases that iPod does not get charge in the half way of installatin (a proper installation, you will see a running bar showing on the iPod screen just after the format), so you can imagine a hard disk got format but only got an uncompleted OS, of course, the iPod would not get recognized and mounted, and do not manage to communicate with the computer. At this stage the iPod will show a Sad iPod icon, a folder with exclamaiton points or a battery charging icon.
So, what would you do when it reach at this stage, a Reset would not work, and you would not able to do the Restore as the iPod is totally unrecognized by the computer.
Therefore, is there anyway to solve this problem, in my opinion and from my past experience, the answer is "yes", the simple way is to put your iPod in Disk Mode, when it plug to the computer, it will show as an external Hard Disk, you must fix it by doing a format (RESTORE would not work at this stage as it still can't recognized and mounted), in Mac we can use "Disk Utility" but the XP would not allow you to do the format in FAT32. After the formatting, replug the iPod with the computer, then it can be mounted and allow you to do the RESTORE.
In addition, I find an interesting point is, if your iPod formatted with a Mac, you will have better chance to be mounted with a PC, even your iPod does not complete the process of the installation of the iPod updater, and a PC formatted iPod will be likely to be fixed by a Mac as well.
How should we do before the update of the lastest software, for the XP user please do the following:-
1. Go to the system restore and create a check point in order to revert back to the previous version of the iPod updater, or do the back up using the 3rd party software such as Ghost or Go Back.
2. To have a test and make sure the PC's USB works properly. You can use the iPod or a PDA, and just make sure it got charged.
3. Have your iPod a full charge before the installation of the iPod updater
So, who is the main killer for the iPod?
For further infomation please read the following link - which wrote by a groups of great people - thank you guys
http://discussions.info.apple.com/webx?128@@.68ae8668Hello Shanker Ghimire,
Please try run the following command:" devenv /resetuserdata " to have a test, it will clear all your settings.
By the way, have you ever got any error when install that Visual Studio SDK?
In case there are some unknown errors, I'd like to ask you for some logs. Please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
error message-The installer has insufficent privileges to modify this file:C:\Program Data\microsoft\windows\start menu\programs\iTunes\.iTunes.ink
How do I correct this to download iTunes so it will run?That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I just tried to download - 3 times - 2 from I.E. 11 and 1 from Chrome - all get the same result that there is an error in the installer file.
I'm not seeing any way to contact Adobe directly, only forums and this one seems closest to what might be helpful. Thanks for any advice you can provide.use a different (wired) internet connection and/or a download manager. you can also try dl'g from prodsigntools.com
to dl from prodesign.com, go here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
I was upgrading my iTunes program last night, but there was an error in the installation. Runtime error of incorrectly installing of C+ by the program. Now I can not access my iTunes program. Is there a fix to this problem?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error: -1612 The installation source for this product is not available. Ver
Hi,
I am trying installing the FA in SAPB12005A SP01 PL36. and I received this error message:
Error: -1612 The installation source for this product is not available. Verify that the source exists and that you can access it.
How can I resolved this?
Regards,
IANI am getting the exact same error. How come anyone else did not get it?
The procedure I followed was :
Downloaded and installed the "download manager" first.
Then selected all product updates from BOXI3.1 Enterprise
It downloaded 58 items. After an inquiry I came to know that you need to install only the latest patch, i.e. Patch 1.7 will include all previous patches. So I was running 1.7 and getting this error constantly, and unable to install it at all.
I tried downloading it from different places and networks, same error persists. -
Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
I am using Windos 7 64 bit Professional German edition.Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code" -
I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
-
When I try to install itunes 10.5.2, I get the following error message "The installer has insufficient privileges to modify this file c\progamfiles\itunes\itunes.exe and won't install. help
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled -
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod? -
Error during the installation of SAPNetWeaver
i try to insall sap netweaver but there is error during the installation,the message is:
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
when i check the file C:\sapdb\NSP\log.txt for error i find :
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: One or more validation errors occured:
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: PARAMETER ERRORMESSAGE
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: ========= ============
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: DBNAME Instance already exists
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: Database NSP must not exist
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: installation exited abnormally at Mo, Mar 15, 2010 at 00:06:00
Mon Mar 15 00:06:02 CET 2010 MaxDB: Error during call to sdbinst, rc= 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Done with call_sdbinst
Mon Mar 15 00:06:02 CET 2010 MaxDB: rc of sdbinst = 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Start of CallSdbuninst
Mon Mar 15 00:06:02 CET 2010 MaxDB: No IndepProgPath. Nothing to do.
can you help me to solve this problemHi Mustsap,
as the log points out, there are remainders of a previous installation of NSP DB on your computer.
Try the RegClean tool that comes with the evaluation copy. Eventualy you have to delete keys from the registry manualy. You won't be able to to reinstall before these remainders are removed.
Cheers Markus
Maybe you are looking for
-
Get an error message trying to access a remote PC over the internet on Mac
At work we have a remote web work place. I can get into the site but when I try to access the link to the computer list the message below is displayed. Error Message: This portion of the Remote Web Workplace requires the Microsoft Remote Desktop Acti
-
Find characters A-Z in a string
Hi, I have a alphanumeric string. In some cases the string does only contain numbers, no characters. Example for the string: 123 432 234A OR without characters 123 432 234 How can I check i
-
Where is the rmic in the JDeveloper?
Do I need to rmic my RMI program from the command line? I can't find the rmi compile feature in the JDeveloper. Thanks.
-
Signing into iCloud with a new sign in.
I have recently changed my AppleID and signed out of the Mac ICloud selecting "delete" on all the prompts. I have signed in using the correct new AppleID and password but on the sign in screen the "loading circle" has been showing for the last hour.
-
Get Pricing Condition Result: BAPI_QUOTATION_CREATEFROMDATA2
Hi Experts, I need to get the pricing condition data in BAPI_QUOTATION_CREATEFROMDATA2, under the table QUOTATION_CONDITIONS_IN when in TESTRUN mode, is it possible? I have tried in several time but it cannot work. It prompt me info message 'For the