BPC EVAfter not continuing on drill down?

Does anyone know how to make the EVAfter continue to work on a drill down?  I have 3 nested rows, with the EVAfter on the 2nd and 3rd nested rows, when I initially open the report and the report expands, my EVAfter is working fine, but once I start drilling down I lose the formatting.
Thanks,
Teri

Iu2019m not sure of you exact issue, I know of two possible scenarios that can cause the EVafter to disappear, (pending you build);
After each expand the row after the expand range is deleted. Try adding a couple of blank rows above your EVafter so it is not the immediate next row after the expansion.
(I donu2019t think this is your problem.) After multiple expands the EVafter range randomly stops working. Click on the cell and press F2 to re-active it.
By the way, how is the drill down inserting rows? By inserting new rows or over righting data?
Hope this helps, please reply with an update.
Edited by: David Fletcher on Jun 14, 2008 8:06 PM

Similar Messages

  • Not able to drill down S_ALR_87013558 in reports

    Hello Experts,
    I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client.
    What could be the reason.?
    Please suggest.
    Thanks,
    Kumar Srinivasan

    Hi Kumar,
    Follow below steps in sequence.
    1. Please execute CJE2.
    2. Double Click on report 12KST1A. Message will come "You are changing an SAP delivery object". Press the tick mark.
    3. On Output Type tab, you must have clicked on radio button "Graphical Report Output". Please change the radio button classical drilldown and check "Available on Selection Screen" at the buttom.
    4. Save it.
    Check your report again and you will have an option there.
    Regards,
    Amit

  • Rebate agreement-Difference coming for credit note value and drill down value .

    Hello Friends,
    In 2013 we had created one rebate for which the validity period was 1st April 2013 to 31st March 2014 . At the end of each month, rebate amount was settled by raising credit note to the customer . Now at the end of March'14 during final settlement, a credit note was raised to the customer . The issue here is there is difference of 1.13 (Pounds) between credit note value and the drill down value for March'14 . Lets say our credit note value is-100 (Pounds)and Drill down value for the month March'14 is 101.13 Pounds. We are not able to find out why this difference is coming . Please let me know your inputs on this .
    Regards,
    Sandeep G. 

    Sandeep -
    During final settlement of a rebate agreement, it calculates rebate amout for the the entire time period less payments already made to a customer and then issues a credit memo request based on that.Please check all the the invoices created during entire period and check accrual calculation.It should match.
    You can check VBOX table to get billing documents for the entire period.
    Let us know if you still have an issue.
    Thanks & Regards
    Amit Gupta

  • Sort control does not show in drill down ?

    I have a sort control attached to a column header in one of my report and it works fine. However it does not show up in the drill down sections. Is there a way to fix that ?
    Thanks

    I am sorry if my question was not clear of i am misunderstanding your solution.
    My sort control shows up in the grouped data but does not show up in the drill down page after drilling down. what can i do for the sort control to show up in the drilled down page

  • Drill down value not matching with Displayed Report Painter Issue-GR55

    Hi,
    Need your help for an issue in drill down value of report painter from actual cost coloumn.
    I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
    Could you suggest on this issue.
    Thank you for your cooperation.
    Regards,
    Rakesh

    The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

  • Reports are not drilled down.

    Hi All,
    I am working on CRM webclient reporting. I have the issue in Production system. In production system I am able to see alll the reports. Ex;- I want to see the Accounts all accounts I am able to see. But when I choose any account by clicking on that it is not displaying means I am not able to drilled down.
    But in the same time I am able to drill down reports in DEV and QAS. Any suggestion----
    Thanx
    Chinmaya

    Hi Rupesh,
    Thanks for your reply. I have given every dam authorization to that user and user is assigned to org model also as manager.
    Thanx
    Chinmaya

  • No Drill down XI R2 - VB2005

    I want to join the group having a problem with this issue!!!!!
    My Windows Forms App has a couple dozen reports that a user can select to run.  Most work correctly with respect to drill down; however, a couple do not.  The drill down works correctly in those reports when I assess them directly from Crystal XI but running the App to configure and display the report produces a preview that has no response to drill down.
    The code within Visual Studio 2005 that configures each report is done in C# and uses an instance of Crystal Reports Viewer to preview the report.  Essentially the code is only creating a sql statement and record set that is used for the report data source.  I can trap the viewer's Drill event in the C# code and verify that the Drill event fires and that the NewGroupLevel gets set corectly (for example, if I double click on Group 7, the NewGroupLevel shows up as 7 after the event fires.)  I created a formula within the report to display the value of drilldowngrouplevel and inserted the formula in group footer 7.  Before double clicking with the magnifying glass cursor in group footer 7, the formula displays "0.00" and the same value ("0.00") continues to display after the event fires and NewGroupLevel has changed to 7.
    To successfully resolve this issue a couple of times, I have discarded the report and completely started over - - rebuilding the report and the VS code to configure it exactly as before and the issue goes away!
    I am a little tired of that way of resolving the issue!  If anyone has any clue about how the value of NewGroupLevel gets passed to and is supposed to show up as drilldowngrouplevel, or has any suggestion of an easier way to resolve the issue, I would sure like to hear about it.

    See if [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note helps.
    Ludek

  • Workflow Monitor Drill Down

    Hi,
    Not sure if this problem is related to the OWB team, but
    would definitely need to know if this has been experienced before.
    We have OWB 9.2 running on a Oracle 9i R2 Database (9.2.0.5) with workflow 2.6.2. We have process flows
    deployed and running properly. In the Workflow Monitor
    we are not able to drill down to the sub process for some
    reason. When we double click on the process, it dosen't
    do anything. Normally, Workflow allows the drill down
    to the sub process.
    Is this a restriction of OWB by any chance ?
    Any tips would be greatly appreciated.
    Rgds,
    Sri

    Hello, I have the same versions of OWB and Workflow. I observed this very behaviour, and explained it noticing that the subprocesses are really functions which call the processes. A process MYSUBPROCESS is called by a function named something like @MYSUBPROCESS, so I think it's impossible to drill down. In fact in the Monitor if you click on a sub process, the activity type is equal to "function" in the Definition tab -- instead of "process".
    Antonio

  • Xcelsius drill down problem.

    Hi gurus, I'm developing drill down chart and table.
    I want to reset, making cell blank, the drill down cell when i click combo box.
    I used push button to refresh or reset drill down value but it can not refresh(reset) drill down cell
    because the destination cell of the chart remains drill down value
    I tried like below way
    *Dashboard explanation
    this dashboard consists of one chart, one table, one combo box and one push button.
    Of course, chart has the drill down function
    a : drill down value
    Goal : make drill down cell turn to blank after i used drill down once.
    1ST.
    when i click the chart and use drii down, a is entered into drill down cell
    2ND
    by using "push button", i tried to reset drill down cell
    but unfortunately it does not work.
    Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
    Drill down cell changes like this
    1 -> 2 -> 3
    a -> blank -> a
    i have to eliminate (2->3) phase or find another way to refresh drill down cell.
    I think problem is the chart which remains drill down value(a) although pushbutton reset the drill down cell to blank.
    Is there any way to refresh or reset drill down value when i click combo box?
    Should i develop custom-component? i'm waiting for your answer.
    Thanks in advance.
    Regards
    Kwon

    Amit,
    Can you confirm if what you're saying also holds for components with the "Enable Drill Down" option enabled, and the "Default Selection" is set to "No Selection (-1)"?
    I'm running into an issue where the "Default Selection" value is not cleared out after performing 3 levels of drill-down. On the third time I do a drill-down, by default the first element is selected, even though I've set the "Default Selection" to "No Selection (-1)".
    Thanks.

  • Drill down in custom draft report

    I am creating a custom report for just draft Inventory Transfer.
    SELECT 'Transfer' AS 'Document Type', T0.[DocNum] AS 'Document Number', T0.[DocDate] AS 'Ship Date'
    FROM  [dbo].[ODRF] T0
    WHERE T0.[ObjType] = 67 AND T0.[DocDate] <= CAST(FLOOR( CAST( GETDATE() AS FLOAT ) ) AS DATETIME)
    I create a draft Inventory Transfer with todays date as the posting date and document date.  The report shows the Invnetory Transfer but I do not have a drill down arrow next to the document number.  This report is essentially the same as the Document Draft Report for Inventory Transfers only.
    If I open the draft document report, there is a drill down arrow for the document.
    1. Inventory --> Inventory Reports --> Document Drafts Report
    2. Select Inventory Transfer as the selection criteria
    3. Click OK
    The document number has the drill down arrow.
    Why:  I am trying to create an alert for all transfers that are to be shipped today.  I am looking to have the inventory manager create Inventory Transfer drafts, then the warehouse will have an alert show all inventory transfers that are to be sent out.  I want to be able to have the warehouse drill down to each inventory transfer and add it to the system when the transfer is shipped.

    Hi,
    Try this:
    SELECT 'Transfer' AS 'Document Type', T0.DocNum, T0.DocDate AS 'Ship Date', T0.DocEntry
    FROM dbo.ODRF T0
    WHERE T0.ObjType = 67 AND DateDiff(dd,T0.DocDate, GETDATE()) >= 0
    You have to include Docentry to drill down. DocNum is not an index of the table.
    Thank,
    Gordon

  • Drill Down with Union ALL in a query

    Why when i use a UNION ALL in a query or some sentences of SQL the drilldown disappears ? Does exists a special syntax ??
    A query example:
    SELECT DISTINCT CASE T0.[ObjType] WHEN '13' THEN 'Factura' WHEN '203' THEN 'F. Anticipo' END AS Documento, T0.[DocNum] AS NumDocumento, T0.[DocDate] AS Fecha, T0.[NumAtCard] AS Referencia, T2.[DocNum] AS 'Ref NC', 
    T0.[DocTotal] AS TotalMN, T0.[DocTotalFC] AS TotalME, CASE T1.[TaxCode]
    WHEN 'A2' THEN '15'
    WHEN 'A1' THEN '10'
    WHEN 'A0' THEN '0'
    END AS '%IVA', T0.[DocRate] AS TC FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry  LEFT JOIN ORIN T2 ON T1.TrgetEntry =  T2.DocEntry
    UNION ALL
    SELECT DISTINCT CASE T0.[ObjType] WHEN '13' THEN 'Factura' WHEN '203' THEN 'F. Anticipo' END AS Documento, T0.[DocNum] AS NumDocumento, T0.[DocDate] AS Fecha, T0.[NumAtCard] AS Referencia, T2.[DocNum] AS 'Ref NC', 
    T0.[DocTotal] AS TotalMN, T0.[DocTotalFC] AS TotalME, CASE T1.[TaxCode]
    WHEN 'A2' THEN '15'
    WHEN 'A1' THEN '10'
    WHEN 'A0' THEN '0'
    END AS '%IVA', T0.[DocRate] AS TC FROM ODPI T0  INNER JOIN DPI1 T1 ON T0.DocEntry = T1.DocEntry  LEFT JOIN ORIN T2 ON T1.TrgetEntry =  T2.DocEntry

    Carlos
    When you use the Union Clause you will not get the Drill Down link button.  You may try creating a view of your Query and then Create a new Query in SAP joining the View and the SAP table containing the link data to get the links.
    Suda

  • Programmatically print current page in a drill-down view

    VB.NET 2008, CR 2008
    Calling the PrintToPrinter method of the Report Document allows me to print a specified page to the printer. 
    However, there doesn't seem to be a similar method that allows specifying a page for the viewer control. 
    Is there any way to programmatically print the current page displayed in the Viewer, even when the view is a drill-down view?
    Thanks
    ido

    Hi David,
    Thanks for the quick reply.
    Perhaps I didn't explain myself clearly enough.  I can't use the reportDocument.PrintToPrinter() method because that method completely ignores the fact that the viewer control is currently showing a drill-down view. 
    For example, if the viewer is showing Page 1 of a drill-down or on-demand subreport, calling reportDocument.PrintToPrinter() would print a page from the main report, not from the drill-down view.
    So, the question is: can I print a specified page from the Viewer control (not from the ReportDocument object).
    Thanks,
    ido

  • Drill down in BI Admin cockpit

    Friends,
    I successfully installed and setup BI admin cockpit.
    In the portal , when I clicked on Data Load Status-> and then
    Process Status, it lists process chains and processes in different iVews.
    when I move the cursor over a process chain, the cursor turns to thumb. But if click on that, it is not talking to another screen. I'm not able to drill down on any tab/items.
    Please help.
    Joe

    Hi
    You should have the relevant authorizations for the same.
    Hope it helps

  • How to reset the value of drill down - Chart

    Hi gurus. I have a problem related with drilldown.
    is there any way I can reset the drill down value?,of course, except for using reset button
    (in  this case "reset" means "make the cell blank of certain value")
    I tried using "push button" and the cell is reset.
    However, even though the cell is reset, the cell is set to the drill down value in one second.
    ex. Drill down destination : a --> "" --> a
    (a is drill down value)
    Is there a way to reset the drilldown value?
    Thanks in advance.

    Thanks for your help , Sonja
    I used push button but it can not refresh(reset) drill down cell
    because the destination cell of the chart remains drill down value
    I tried like below way
    a : drill down value
    Goal : make drill down cell turn to blank after i used drill down once.
    1ST.
    when i click the chart and use drii down, a is entered into drill down cell
    2ND
    by using "push button", i tried to reset drill down cell
    but unfortunately it does not work.
    Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
    drill down cell changes like this
    1 ->   2   ->  3
    a -> blank ->  a
    i have to eliminate (2->3) phase or find another way to refresh drill down cell.
    Regards
    Kwon

  • SEM Cockpit Drill Down Parameters are Missing

    Dear Team,
    I am facing a strange problem with BW-SEM Cockpit - we had imp. the SEM
    Cockpit a year ago and it was working fine with all drill down parameter within
    the internal web. but suddenly for some reason, all my cockpit KPI graphs are
    not showing the drill down parameters, I have checked my settings of each KPI
    for parameters, all are intact, no changes..
    But how come it is happing all of sudden..?
    guys kindly throw some light on this issue if any one of you have come across
    this situation..or any std. proposals/recomended sol. are welcome.
    Regards.

    You should fill checkbox 'Display Hierarchy Icons' in BEx Analyzer - anlysis mode - analysis grid. ([http://help.sap.com/saphelp_nw70/helpdata/EN/85/1321d0b7864766b5208a0b221a7608/content.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/85/1321d0b7864766b5208a0b221a7608/content.htm])

Maybe you are looking for