BPC NW10.0 Execute the currency translation in DEFAULT.LGF

Hello,
I would like to execute the task currency translation in DEFAULT.LGF
Nb : we used the DEFAULT.LGF when we import the actual and budget data with Excel file (.csv)
I created the DEFAULT.LGF and inserted the following rows:
*XDIM_MEMBERSET CATEGORY=%CATEGORY_SET%
*XDIM_MEMBERSET RPTCURRENCY=LC
*XDIM_MEMBERSET TIME=%TIME_SET%
*XDIM_MEMBERSET DATASRC=INPUT
* INCLUDE FXTRANS.LGF
But, not currency translation when we import the actual and budget data
Nb : When I execute FXTRANS.LGF (FX_STATEMENT), it's OK , the system created the new records for translation currency
Best regards
Bastien

Hi,
If I used the input schedule, the records are converted in EUR
If I used manually  the fonction the currency translation , the records are converted in EUR
Example of conversion
COSTCENTER
COSTELEMENT
INTERCO
COMPANY
DATASOURCE
CATEGORY
RPTCURRENCY
TIME
Measures
S169100
G502
P_SND
S0168
IMPORT_SAP
BUDGET
LC
2013.OCT
100,0000000
S169100
G502
P_SND
S0168
IMPORT_SAP
BUDGET
EUR
2013.OCT
68,0000000
Bastien

Similar Messages

  • Can I run the currency translation for multiple years at the same time?

    Dear Friends,
    I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
    say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
    Can I run the currency translation for multiple years at the same time ?
    Note: The year is determined from the YEAR property of the "Time" dimension
    appreciate any inputs,
    thanks

    You can run currency translation for multiple years.
    I think the problem it is actually related to how you are sending the parameter to currency translation script.
    Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
    My expectation is that actually the script is called just with first year and that's the problem.
    Log of script logic you can find it into:
    C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
    Regards
    Sorin Radulescu

  • The currency translation type 0MEANDAILY is not available in the system

    While executing certain queries for CRM Sales I am getting this error "The currency translation type 0MEANDAILY is not available in the system" I have looked and haven't found this info object in the Business content.
    Any help?
    Thanks
    Arunava

    Dinesh,
       If I do a transfer Global setting from RSA1 on my CRM system  there are four to choose from
      1> Currency
      2> unit of measurement
      3> Fiscal year variant
      4> Factory calander
      Which should be chosen..?? for the 0MEANDAILY . From Anurag's post it's evident that this is a part of the BC and being an info object it's not populated by transferring Global data. Please explain
    Anurag,
      Can you please be a little more specific .. I am in the rsa1--> bc    Then what.. How do I search? I searched against the infoobjects and this is not available
    Thanks
    Aruava

  • Copying of the currency translation methods

    Hello All,
    is there a way to copy the currency translation methods inclusive all steps in the workbench?
    The problem is that we want to use the same currency translation methods for the currency simulation as for the normal currency translation. The only difference should be the determination of the exchange rate ("Exchange rate type" for the currency simulation vs. "Exchange rate indicator" for the normal currency translation). We have over 40 method steps in each CT method and creating of the new CT methods with the same structure as in existing CT methods would be a pretty extensive job ;(
    Could you suggest a way we can solve this problem? (referencing of the existing CT methods with the substitution of the determination of the exchange rate would be an ideal solution, but i am afraid it is not possible ...).
    Many thanks in advance,
    Kirill

    Hello Mani,
    i would create the new CT task for the currency simulation and define the copied CT methods in it's definition. Therefore i will have 2 different CT tasks , one for the currency translation, the another for the currency simulation.
    I would willingly avoid copying of the CT methods, by reason that i have to change both in the future in order to have the same functionality for the currency translation and currency simulation, but i feel it is not possible to avoid this
    Thank you,
    Kirill

  • How can we implement the currency translation in a query definition

    How can we implement the currency translation in a query definition and should it modified for each and every type of currencies

    hi rama krishna
    i think u can not get any translation in Query. this is only for het the report as it is there in tables. if u want to write a report take a help of the Abaper
    hope u goit,assign points if u ok for this
    thanks
    subbu

  • Add new characteristic in the currency translation method

    Hi All,
    I would like to know if it's possible to add a characteristic in the currency translation method in order to use it in the exchange rate determination.
    Currently the available characteristic are: Country, Segment, Cons. Group, Profit Center, Company, Trading Partner, Investees, Document Type, Posting Level, Translation Indicator and Local Currency.
    Thanks in advance.
    Best Regards
    João Anastácio

    One way to accomplish this is to change the method layout to explicitly include the desired characteristic. Another is to make the characteristic in the breakdown category for the items where it is to be included.

  • Can any tell me how to do the currency translation 0LOC_CURRCY to 0Order_cu

    Hi All,
    Currently the keyfigures are displayed in the local currency in the report level. But in the report the business people also like to see these keyfigures in the Order currency currency EG 0INVCD_AMNT is having currency 0LOC_CURRCY but in the queries should also be displayed in 0Order_curr.
    Probably conversion can be done on base of * znetprice_CC/0netprice.
    Can any tell me how to do the currency translation 0LOC_CURRCY to 0Order_curr.
    Thanks & Regards,
    Venkat

    this is done

  • Error on the currency translation

    Hi experts,
    I get the next error on the execution of the FX Restament package:
    RUN CURRENCY CONVERSION
    3  SUBMITTED, 0  SUCCESS, 3  FAIL.
    MESSAGE FROM DOING CURRENCY_CONVERSION
    Member () of dimension (ENTITY) is not a valid member
    Member () of dimension (ENTITY) is not a valid member
    Member () of dimension (ENTITY) is not a valid member
    Why the script return a error when i am entering a valid member entity on the variable of the package?
    What are the values that the FX Restatement package needs on these varialbles?
    ENTITY: I enter a valid member of entity dimension
    CATEGORY: i enter actual
    GROUPS: i enter a valid member of the dimension. the group contain the entity i have enter on the first variable
    TIME: valid member of time dimension
    Thank you in advance.
    Regards.

    Problem solved,
    We have changed the parameter name GROUPS for the parameter CURRENCY on the script logic for the C/T.

  • Currency Translation with SAPBEXfireCommand (VBA)

    Hi
    How can I execute the Currency Translation "By Target Currency Using Definition Currency" with a definite ExRate?
    Can someone help me?
    Thank you.
    Markus

    hi mark
    look at these links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/help/sdn_nw04/saphelp_nw04/helpdata/en/ec/076f3b6c980c3be10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ec/076f3b6c980c3be10000000a11402f/frameset.htm
    may be helpfull for u
    Regards
    KR

  • Running Currency translation

    Hi experts,
    We have customized the currency translation on the group currency way.
    The process is working right when we select next values on the variants:
          Group variant: group_G
          Entity variant: all the entities that belong to group G.
    The problem comes when we want to execute the currency translation just over one entity. All the previos data we have converted over the group_G and repotring currency(EUR) members is deleted and only the entity we have converted lastly has converted data. It seems the process overwrite all the range of data you select on the variants.
    My question is if it is possible to convert just a entity without deleting the rest of the previous converted entities. It means to use like a merge instead of replace on the process.
    Maybe this is the standart behaviour of the currency translation when you use the group currency customizing.
    Did anybody have this problem before?
    Regards.

    Hi Rushendra,
    By running UJKT the error had come to light and the issue has been resolved..
    Thanks a lot
    Regards
    Navin

  • BPC 7.5 NW - Exchange Rates & Currency Translation

    Hello All,
    I have a couple of questions regarding the BPC currency translation process.
    1.  We have two options to store the exchange rates - either as a direct quote or as an indirect quote.  How are the exchange rates stored in the BPC system?
    2.  We have a property called "MD" in the InputCurrency dimension, which is used as a 'factor' in the currency translation process.  I would like to know how this property is used, in conjunction with the direct/indirect method of maintaining the exchange rates.
    As always, thanks for all your responses.
    Best regards,
    Van.

    Thanks for the response.  I do realize that we can enter the exchange rates either via a flat file or an Input Schedule, and also how the "MD" factor is utilized in the currency translation process.
    I will try to rephrase my questions, as below: 
    1.  In ECC, we have the option to maintain the exchange rates either as a direct rate or an indirect rate.  Similary, I would like to know how the exchange rates are "_stored_" in the BPC system - as indirect quotations or direct quotations. 
    2.  In addition, I would also like to know how the "MD" property in the InputCurrency dimension should be maintained.  In other words, let us say that the exchange rates are stored as direct quotes.  How do we maintain the "MD" property in the inputcurrency dimension for this exchange rate - M or D?
    Hope my questions are a bit more clear now.
    Appreciate all your responses.

  • BPC Currency translation..

    1. The currency translation need to be done for 2 reporting currencies..USD, EURO respectively.
    How does the CT works...can we translate all global entity  codes transation to USD and then translate USD translated figures to EURO
    or... Directly translate all the entity date to EURO directly?
    2. How the rates are loaded to BPC from BI  TCURR tables...is there any automation possible.
    Please let me know the options..

    In the BADI UJ_CUSTOM_LOGIC do this logic:
    *From your CT_DATA which may contain the rate/currency/translation date, etc.:
         CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
              EXPORTING
                   date                     = "This is your translation Date (most cases sy-datum is used)
                   foreign_amount   = "The amount you wished to be converted
                   foreign_currency = "The currency you wanted to change
                   local_currency   =   "The target currency
                   rate                     =  ""If rate is provided (or most likely you will have to refer on translation date, whichever is convenient)
              IMPORTING
                   local_amount     =  "This will return the value of the converted rate
              EXCEPTIONS
                   no_rate_found    = 1
                   overflow         = 2
                   no_factors_found = 3
                   no_spread_found  = 4
                   derived_2_times  = 5
                   OTHERS           = 6.
    Take note that this conversion doesnt mean just a local currency, it can be any currency you wish to convert.
    modify whatever value you need to modify in your CT_DATA
    and youre done.

  • Currency Translation at the Web Template level (standard functionality)

    Hi Experts ,
    We are currently working in BI 7.0 env. with source system ECC 5.0.
    We are working for a task where we need to make the BEx  queries enabled for currency translation .
    The requirement is :-
    The user should be enable to give/opt/choose for the follwoing options:-
    Currency type (target currency in which the translation is aimed)
    Exchange Rate ( Standard(M) or other(P) or something else) and
    Key date: The translation will be performed taking the exchange rate on that particular date.
    We do have 2 option to perform the task...
    1:- Either we do it thru currency translation type definition(RSCUR) and then attaching this currency translation for every amount key figure values at each query level. OR
    2:- If we can go and find something at the Web Template level and add/modify the template in such a way so that it gives us the functionality to translate a source currency into a desired one with desired exchange rate type (currently either M or P) and for a specific date.
    At this point of time when we do have numerous sub-areas holding hundreds of queries, we want something which should be available as the modification/addition to standard functionality at the web template level and not at the query level as changing each and every one of them and testing would be a cumbersome process and would be costly and risky at the same time. So we are just wondering if we can find something with option no. 2 and add/modify something in the standard functionality.
    Please ask for any more information required.
    Thanks very much.
    regds.

    Hi Amit,
    You would still need to define the Currency Translation using RSCUR where you would specify
    -the exchange rate type (either fixed or variable)
    -the target currency (either fixed or variable)
    -the reference date
    You don't need to modify any of your queries. You can instead use 'Translate Currency'/[SET_CURRENCY_TRANSLATION] command in WAD & specify the Currency Translation as defined in RSCUR. If you want the target currency & exchange rate type to be driven by user input, you can define these as variables in RSCUR & invoke the variable screen using 'OPEN_VARIABLE_DIALOG' in WAD for user input just before calling 'SET_CURRENCY_TRANSLATION' command.
    --Priya

  • Currency Translation based on Last Day of the Acquistion month

    Dear all,
                Request to help me in understanding how we can calculate the currency translation rate as per the last day if the acquistion month..
    For Example if the  Acquistion date : 01/01/2008 (mm/dd/yyyy) the currency translation should happend based on the rate maintained as on 31/01/2008.
    Thanks
    Pavan Kumar Prakhya

    First, you will need to convert the actual acquisition date to the end date of the Fiscal Period. This can be done by using two separate Function Modules. First, get the actual Fiscal Period by entering the date and Fiscal Year Variant into the DATE_TO_PERIOD_CONVERT Function Module. Use the Fiscal Year and Fiscal Period from this and determine the end date of the Fiscal Period by using Function Module LAST_DAY_IN_PERIOD_GET with Fiscal Year, Fiscal Period and Fiscal Year Variant as your inputs.
    For the conversion, use the Function Module CONVERT_TO_LOCAL_CURRENCY. The inputs for this would be the last date of the Fiscal Period, the amount to be converted, the from currency code, the to currency code, blank in rate, AS01 in type of rate and X in read TCURR. This assumes, however, that month-end rates (rate type = AS01) have been loaded into your source system and these rates have been transferred to your BW environment.

  • Currency translation taking more time at first time in the report

    Hi All,
    Here is an issue regarding the currency translation in the report. when we click on the currency translation from the contaxt menu on the report, its taking more time for the first time to get the selection options. But it is fast from the second time onwards. It will be not user friendly if its takes more time for the first time. Is there any way to fast up the processing time for the first time when i go for the "currency translation" option at report level for the first time.
    let me know why it takes more time for the first time when we go for this option at report level.
    Thanks,
    Jack

    Once again from the top.
    This is undoubtedly not a database issue.
    I doubt you can fix it in the database.
    You can, however, spend a lot of hours asking questions and poking around if you are a consultant paid by the hour.
    But as long as you are looking for something to do here are some that won't fix the problem but may be worth a few minutes of your time.
    WHERE 1 = 1Are you kidding? Drop this nonsense. The Oracle optimizer is not brain dead. If it were my database I would also drop the parallel hint like a bad habit.
    /*+ parallel(rp1, 8) */Again the Oracle optimizer is not brain dead. Ask for parallel threads that don't exist and the database will just queue your SQL and let it sit there until sufficient resources become available.

Maybe you are looking for