BPC Performance Testing
Hi All,
Any pointers to how to do go about performance testing for BPC application?
When using Load runner Tool,it does not capture, any transactions happening betwen the server and the front end (which is excel in the case), hence the front end simulation for performance testing is not possible.
Performance testing w.r.t BEx analyser queries by directly executing the query using txn rsrt.Is there any way of going about in a similar fashion?
Thanks in advance
Sridhar
Hi
I understood your concern but actually for SAP BPC we don't have anything to test the performances for SAP BPC client.
If the BPC client hardware requirement which can be found into installation guide are satisfied then the performances of SAP BPC client are fine.
Regards
Sorin Radulescu
Similar Messages
-
UI performance testing of pivot table
Hi,
I was wondering if anyone could direct me to a tool that I can use to do performance testing on a pivot table. I am populating a pivot table(declaratively) with a data source of over 100,000 cells and I need to record the browser rendering time of the pivot table using 50 or so parallel threads(requests). I tried running performance tests using JMeter, but that didn't help.
This is what I tried so far with JMeter:
I deployed the application in the integratedweblogicserver and specify the Url to hit in JMeter ( http://127.0.0.1:7101/PivotTableSample-ViewController-context-root/faces/Sample) and added a response assertion for the response code 200. Although I am able to hit the url successfully, the response I get is a javascript with a message that says "This is the loopback script to process the url before the real page loads. It introduces a separate round trip". When I checked in firebug, it looks like request redirect of some sort happens from this javascript to another Url (with some randomly generated parameters) which then returns the html response of the pivot table. I am unable to hit that Url directly as I get a message saying "session expired". It looks like a redirect happens from the first request and then session is created for that request and a redirect occurs.
I am able to check the browser rendering time of the pivot table in firebug (.net tab), but that is only for a single request. I'd appreciate it if anyone could guide me on this.
Thanks
NaveenI found the link below that explains configuration of JMeter for performance testing of ADF applications(Although I couldn't find a solution to figure out the browser rendering time for parallel threads).
http://one-size-doesnt-fit-all.blogspot.com/2010/04/configuring-apache-jmeter-specifically.html
Edited by: Naveen Ramanathan on Oct 3, 2010 10:24 AM -
Performance testing of servlets / beans / jsp ?
Hi. I'd like to performance test my applications, anyone have a clue on what software to use?
I use Fort� for Java CE 3 as the IDE and TomCat 3.23 as the servlet / jsp container.
Hopefully there are some opensource tools to use for this?
Regards,
ChrisYou can precompile JSP's, this removes the small hickup when they are requested the first time (making the server translate and compile them). Check the documentation of your specific web/application server on how to do this.
Otherwise:
- buy better hardware
- use a better application server
- make sure your network is properly configured (so packets don't get routed around the network four times before they reach their destination for example)
- make sure your program logic doesn't create bottlenecks such as
unnecessary HTTP requests, redundant loops, etc.
- optimize your database access, use connection pooling
- optimize your database queries. Create indexes, make sure the SQL queries themselves aren't doing unnecessary trips around the database, etc. -
Hi there,
I'm working on testing a AJAX and JavaScript Project which has several pages but all in the same URL. I need to test some attribute on the page or parameter past by AJAX or Javascript. Can Web Performance Test work to get what I want?
Thanks,
Hello,
Thank you for your post.
Web performance test is used to test if a server responses correctly and the response is consistent with what we expected. And we test the response speed, the stability and scalability.
The Web Performance Test Recorder records both AJAX requests and requests that were submitted from JavaScript, but
web test does not execute JavaScript. I am afraid that you can’t use web test to test parameter past by AJAX or JavaScript.
Please see:
Web Performance Test Engine Overview
About JavaScript and ActiveX Controls in Web Performance Tests
From the first link, “Client-side scripting that sets parameter values or results in additional HTTP requests, such as AJAX, does affect the load on the server and might require you to manually modify the Web Performance Test to simulate the scripting.”
If you want to execute the function typically performed by script in web test, you need to accomplish it in coded web performance test or a web performance test plugin. Please see:
How to: Create a Coded Web Performance Test
How to: Create a Web Performance Test Plug-In
I am not sure what the ‘some attribute on the page’ is. If you mean that you want to test those controls on the page, you can do coded UI test, which can test that the user interface for an application functions correctly. The coded UI test performs actions
on the user interface controls for an application and verifies that the correct controls are displayed with the correct values. You can refer to this article for detailed information about code UI test:
Verifying Code by Using Coded User Interface Tests
Best regards,
Amanda Zhu [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Performance Testing - Upgrade from 4.6B to ECC6.0
Hi,
We are doing an upgrade from SAP 4.6B to ECC6.0. I would like to know what would be the best approach for doing a performance test in an upgrade project. More specifically,
1. What are the main components that need to be tested for performance?
2. What are the important transaction codes/external applications (if any) that can be used to do performance testing in both 4.6B and ECC6.0? (ST05 or ST30 or something else?)
3. Any best practice recommended by SAP for doing performance tests?
Thanks in Advance,
Reena> We are doing an upgrade from SAP 4.6B to ECC6.0. I would like to know what would be the best approach for doing a performance test in an upgrade project. More specifically,
>
> 1. What are the main components that need to be tested for performance?
Those components you use.
> 2. What are the important transaction codes/external applications (if any) that can be used to do performance testing in both 4.6B and ECC6.0? (ST05 or ST30 or something else?)
What is "important" for you?
Markus -
Log file sync top event during performance test -av 36ms
Hi,
During the performance test for our product before deployment into product i see "log file sync" on top with Avg wait (ms) being 36 which i feel is too high.
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
log file sync 208,327 7,406 36 46.6 Commit
direct path write 646,833 3,604 6 22.7 User I/O
DB CPU 1,599 10.1
direct path read temp 1,321,596 619 0 3.9 User I/O
log buffer space 4,161 558 134 3.5 ConfiguratAlthough testers are not complaining about the performance of the appplication , we ,DBAs, are expected to be proactive about the any bad signals from DB.
I am not able to figure out why "log file sync" is having such slow response.
Below is the snapshot from the load profile.
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 108127 16-May-13 20:15:22 105 6.5
End Snap: 108140 16-May-13 23:30:29 156 8.9
Elapsed: 195.11 (mins)
DB Time: 265.09 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,168M 1,136M Std Block Size: 8K
Shared Pool Size: 1,120M 1,168M Log Buffer: 16,640K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 1.4 0.1 0.02 0.01
DB CPU(s): 0.1 0.0 0.00 0.00
Redo size: 607,512.1 33,092.1
Logical reads: 3,900.4 212.5
Block changes: 1,381.4 75.3
Physical reads: 134.5 7.3
Physical writes: 134.0 7.3
User calls: 145.5 7.9
Parses: 24.6 1.3
Hard parses: 7.9 0.4
W/A MB processed: 915,418.7 49,864.2
Logons: 0.1 0.0
Executes: 85.2 4.6
Rollbacks: 0.0 0.0
Transactions: 18.4Some of the top background wait events:
^LBackground Wait Events DB/Inst: Snaps: 108127-108140
-> ordered by wait time desc, waits desc (idle events last)
-> Only events with Total Wait Time (s) >= .001 are shown
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % bg
Event Waits -outs Time (s) (ms) /txn time
log file parallel write 208,563 0 2,528 12 1.0 66.4
db file parallel write 4,264 0 785 184 0.0 20.6
Backup: sbtbackup 1 0 516 516177 0.0 13.6
control file parallel writ 4,436 0 97 22 0.0 2.6
log file sequential read 6,922 0 95 14 0.0 2.5
Log archive I/O 6,820 0 48 7 0.0 1.3
os thread startup 432 0 26 60 0.0 .7
Backup: sbtclose2 1 0 10 10094 0.0 .3
db file sequential read 2,585 0 8 3 0.0 .2
db file single write 560 0 3 6 0.0 .1
log file sync 28 0 1 53 0.0 .0
control file sequential re 36,326 0 1 0 0.2 .0
log file switch completion 4 0 1 207 0.0 .0
buffer busy waits 5 0 1 116 0.0 .0
LGWR wait for redo copy 924 0 1 1 0.0 .0
log file single write 56 0 1 9 0.0 .0
Backup: sbtinfo2 1 0 1 500 0.0 .0During a previous perf test , things didnt look this bad for "log file sync. Few sections from the comparision report(awrddprt.sql)
{code}
Workload Comparison
~~~~~~~~~~~~~~~~~~~ 1st Per Sec 2nd Per Sec %Diff 1st Per Txn 2nd Per Txn %Diff
DB time: 0.78 1.36 74.36 0.02 0.07 250.00
CPU time: 0.18 0.14 -22.22 0.00 0.01 100.00
Redo size: 573,678.11 607,512.05 5.90 15,101.84 33,092.08 119.13
Logical reads: 4,374.04 3,900.38 -10.83 115.14 212.46 84.52
Block changes: 1,593.38 1,381.41 -13.30 41.95 75.25 79.38
Physical reads: 76.44 134.54 76.01 2.01 7.33 264.68
Physical writes: 110.43 134.00 21.34 2.91 7.30 150.86
User calls: 197.62 145.46 -26.39 5.20 7.92 52.31
Parses: 7.28 24.55 237.23 0.19 1.34 605.26
Hard parses: 0.00 7.88 100.00 0.00 0.43 100.00
Sorts: 3.88 4.90 26.29 0.10 0.27 170.00
Logons: 0.09 0.08 -11.11 0.00 0.00 0.00
Executes: 126.69 85.19 -32.76 3.34 4.64 38.92
Transactions: 37.99 18.36 -51.67
First Second Diff
1st 2nd
Event Wait Class Waits Time(s) Avg Time(ms) %DB time Event Wait Class Waits Time(s) Avg Time
(ms) %DB time
SQL*Net more data from client Network 2,133,486 1,270.7 0.6 61.24 log file sync Commit 208,355 7,407.6
35.6 46.57
CPU time N/A 487.1 N/A 23.48 direct path write User I/O 646,849 3,604.7
5.6 22.66
log file sync Commit 99,459 129.5 1.3 6.24 log file parallel write System I/O 208,564 2,528.4
12.1 15.90
log file parallel write System I/O 100,732 126.6 1.3 6.10 CPU time N/A 1,599.3
N/A 10.06
SQL*Net more data to client Network 451,810 103.1 0.2 4.97 db file parallel write System I/O 4,264 784.7 1
84.0 4.93
-direct path write User I/O 121,044 52.5 0.4 2.53 -SQL*Net more data from client Network 7,407,435 279.7
0.0 1.76
-db file parallel write System I/O 986 22.8 23.1 1.10 -SQL*Net more data to client Network 2,714,916 64.6
0.0 0.41
{code}
*To sum it sup:
1. Why is the IO response getting such an hit during the new perf test? Please suggest*
2. Does the number of DB writer impact "log file sync" wait event? We have only one DB writer as the number of cpu on the host is only 4
{code}
select *from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for HPUX: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
{code}
Please let me know if you would like to see any other stats.
Edited by: Kunwar on May 18, 2013 2:20 PM1. A snapshot interval of 3 hours always generates meaningless results
Below are some details from the 1 hour interval AWR report.
Platform CPUs Cores Sockets Memory(GB)
HP-UX IA (64-bit) 4 4 3 31.95
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 108129 16-May-13 20:45:32 140 8.0
End Snap: 108133 16-May-13 21:45:53 150 8.8
Elapsed: 60.35 (mins)
DB Time: 140.49 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,168M 1,168M Std Block Size: 8K
Shared Pool Size: 1,120M 1,120M Log Buffer: 16,640K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 2.3 0.1 0.03 0.01
DB CPU(s): 0.1 0.0 0.00 0.00
Redo size: 719,553.5 34,374.6
Logical reads: 4,017.4 191.9
Block changes: 1,521.1 72.7
Physical reads: 136.9 6.5
Physical writes: 158.3 7.6
User calls: 167.0 8.0
Parses: 25.8 1.2
Hard parses: 8.9 0.4
W/A MB processed: 406,220.0 19,406.0
Logons: 0.1 0.0
Executes: 88.4 4.2
Rollbacks: 0.0 0.0
Transactions: 20.9
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
log file sync 73,761 6,740 91 80.0 Commit
log buffer space 3,581 541 151 6.4 Configurat
DB CPU 348 4.1
direct path write 238,962 241 1 2.9 User I/O
direct path read temp 487,874 174 0 2.1 User I/O
Background Wait Events DB/Inst: Snaps: 108129-108133
-> ordered by wait time desc, waits desc (idle events last)
-> Only events with Total Wait Time (s) >= .001 are shown
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % bg
Event Waits -outs Time (s) (ms) /txn time
log file parallel write 61,049 0 1,891 31 0.8 87.8
db file parallel write 1,590 0 251 158 0.0 11.6
control file parallel writ 1,372 0 56 41 0.0 2.6
log file sequential read 2,473 0 50 20 0.0 2.3
Log archive I/O 2,436 0 20 8 0.0 .9
os thread startup 135 0 8 60 0.0 .4
db file sequential read 668 0 4 6 0.0 .2
db file single write 200 0 2 9 0.0 .1
log file sync 8 0 1 152 0.0 .1
log file single write 20 0 0 21 0.0 .0
control file sequential re 11,218 0 0 0 0.1 .0
buffer busy waits 2 0 0 161 0.0 .0
direct path write 6 0 0 37 0.0 .0
LGWR wait for redo copy 380 0 0 0 0.0 .0
log buffer space 1 0 0 89 0.0 .0
latch: cache buffers lru c 3 0 0 1 0.0 .0 2 The log file sync is a result of commit --> you are committing too often, maybe even every individual record.
Thanks for explanation. +Actually my question is WHY is it so slow (avg wait of 91ms)+3 Your IO subsystem hosting the online redo log files can be a limiting factor.
We don't know anything about your online redo log configuration
Below is my redo log configuration.
GROUP# STATUS TYPE MEMBER IS_
1 ONLINE /oradata/fs01/PERFDB1/redo_1a.log NO
1 ONLINE /oradata/fs02/PERFDB1/redo_1b.log NO
2 ONLINE /oradata/fs01/PERFDB1/redo_2a.log NO
2 ONLINE /oradata/fs02/PERFDB1/redo_2b.log NO
3 ONLINE /oradata/fs01/PERFDB1/redo_3a.log NO
3 ONLINE /oradata/fs02/PERFDB1/redo_3b.log NO
6 rows selected.
04:13:14 perf_monitor@PERFDB1> col FIRST_CHANGE# for 999999999999999999
04:13:26 perf_monitor@PERFDB1> select *from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS FIRST_CHANGE# FIRST_TIME
1 1 40689 524288000 2 YES INACTIVE 13026185905545 18-MAY-13 01:00
2 1 40690 524288000 2 YES INACTIVE 13026185931010 18-MAY-13 03:32
3 1 40691 524288000 2 NO CURRENT 13026185933550 18-MAY-13 04:00Edited by: Kunwar on May 18, 2013 2:46 PM -
Need to install Visual C++ 2010 in MDT before performance testing.
Hi all,
I'm in a situation in which I'm deploying a laptop over MDT, and the display driver is captured by MDT fine. However, upon initial boot after installing the OS, I come across this error when running WINSAT.exe; "The program can't start because MSVCR100.dll
is missing from your computer. Try reinstalling the program to fix the problem." This isn't the first report I've seen of ATI drivers triggering this, but I'm stuck with it regardless.
This is attributed to a component of Visual C++ 2010 not being installed. (It's not preinstalled in our capture, and I'm trying to avoid having to do that again.)
Being that we're a 0-touch organization when imaging, I need a way to remedy this. I'm currently trying to run the install, 'vcredist_x86.exe /q:a' from "run a command line" (sourced on the server's C:\ drive) before the performance tests,
but I can't find a proper place to put this command at in the task sequence. Is this even a viable method? Is there a method to skip WINSAT.exe pre-boot? My initial tests with this aren't working.
Any advice or pointers appreciated!Hi,
Normally I think WinSAT is only relevant when deploying the image to your targeted computers (hardware). So why not integrate Visual C++ components into your reference image?
At the customer I'm currently working for we also put all our Visual C++ installations in the so called Build image.
I have provided a list with the install commands for the various programs.
Visual C++ 2005 SP1 ATL Security Update x64
msiexec /i "vcredist.msi" /qb
Visual C++ 2005 SP1 ATL Security Update x86
msiexec /i "vcredist.msi" /qb
Visual C++ 2005 SP1 MFC Security Update x64
msiexec /i "vcredist.msi" /qb
Visual C++ 2005 SP1 MFC Security Update x86
msiexec /i "vcredist.msi" /qb
Visual C++ 2008 SP1 ATL Security Update x64
install.exe /q
Visual C++ 2008 SP1 ATL Security Update x86
install.exe /q
Visual C++ 2008 SP1 MFC Security Update x64
install.exe /q
Visual C++ 2008 SP1 MFC Security Update x86
install.exe /q
Visual_C_2005_SP1_x64_8_0_56336_EN_M1
msiexec /i "vcredist.msi" /qb
Visual_C_2005_SP1_x64_8_0_59192_EN_M1
msiexec /i "vcredist.msi" /qb
Visual_C_2005_SP1_x86_8_0_50727_42_EN_M1
msiexec /i "vcredist.msi" /qb
Visual_C_2005_SP1_x86_8_0_59193_EN_M1
msiexec /i "vcredist.msi" /qb
Visual_C_2008_SP1_x64_9_0_30729_17_EN_M1
msiexec /i "vc_red.msi" /qb
Visual_C_2008_SP1_x64_9_0_30729_4148_EN_M1
msiexec /i "vc_red.msi" /qb
Visual_C_2008_SP1_x86_9_0_210022_EN_M1
install.exe /q
Visual_C_2008_SP1_x86_9_0_30729_17_EN_M1
msiexec /i "vc_red.msi" /qb
Visual_C_2008_SP1_x86_9_0_30729_4148_EN_M1
msiexec /i "vc_red.msi" /qb
Visual_C_2010_x64_10_0_40219_EN_M1
msiexec.exe /i "vc_red.msi" /qb
Visual_C_2010_x86_10_0_40219_EN_M1
msiexec.exe /i "vc_red.msi" /qb
Trying to install Visual C++ and than run WinSAT post OS installation will not work.
If this post is helpful please click "Mark for answer", thanks! Kind regards -
How to setup the environment for doing the Performance Testing?
Hi,
We are planning to start the performance testing for iProcurement Product, Max number of user we are going to use 1000. For this simulation, what are all basic setups need to do for Application Tier, Database Tier,etc... Can anyone suggest what is procedure to setup environment depending upon the load?User Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/ -
Hiya
We have been doing Load Performance Testing using testing tool QALoad on our Forms 10g application. After about 56 virtual users(sessions) have logged-in into our application, if a new user tries to log-in into our application, the Forms crashes. As soon as we encounter the FRM-92101 error, no more new forms session are able to start.
The Load Testing software start up each process very quickly, about every 10 seconds.
The very first form that appears is the login form of our application. So before the login screen appears, we get FRM-92101 error message.
However, those users who have already logged-in into our application, they are able to carry on their tasks.
We are using Application Server 10g 10.1.2.0.2. I have checked the status on Application Server through Oracle Enterprise Manager Console. The OC4J Instance is up and running. Also, server's configuration is pretty good. It is running on 2 CPUs (AMD Opteron 3GHz) and has 32GB of memory. The memory used by those 56 sessions is less than 3GB.
The Applicatin Server is running on a Microsoft Windows Server 2003 64bit Enterprise Edition.
Any help will be much appreciated.
Cheers
MayurHi Shekhawat
In Windows Registry go to
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems
In the right hand side panel, you will find String Value as Windows. Now double click on it (Windows). In the pop up window you will see a string similar to the following one:
%SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,20480,768 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
Now if you read it carefully in the above string, you will find this parameter
SharedSection=1024,20480,768
Here SharedSection specifies the system and desktop heaps using the following format:
SharedSection=xxxx,yyyy,zzzz
The default values are 1024,3072,512
All the values are in Kilobytes (KB)
xxxx = System-wide Heapsize. There is no need to modify this value.
yyyy = IO Desktop Heapsize. This is the heap for memory objects in the IO Desktop.
zzzz = Non-IO Desktop Heapsize. This is the heap for memory objects in the Non-IO Desktop.
On our server the values were as follows :
1024,20480,768
We changed the size of Non-IO desktop heapsize from 768 to 5112. With 5112 KB we managed to test our application for upto 495 virtual users.
Cheers
Mayur -
Hi
i need to know how the performance testing is done for Hyperion essbase and planning?
I would be great help ............
Thanks
lakshmiHi
i need to know how the performance testing is done for Hyperion essbase and planning?
I would be great help ............
Thanks
lakshmi -
Using Test Setting file to run web performance tests in different environments
Hello,
I have a set of web performance tests that I want to be able to run in different environments.
Currently I have csv file containing the url of the load balancer of the particular environment I want to run the load test containing the web performance tests in, and to run it in a different environment I just edit this csv file.
Is it possible to use the test settings file to point the web performance tests at a particular environment?
I am using VSTS 2012 Ultimate.
ThanksInstead of using the testsettings I suggest using the "Parameterize web servers" command (found via context menu on the web test, or via one of the icons). The left hand column then suggests context parameter names for the parameterised web server
URLs. It should be possible to use data source entries instead. You may need to wrap the data source accesses in doubled curly braces if editing via the "Parameterize web servers" window.
Regards
Adrian -
ActiveX Control recording but not playing back in a VS 2012 Web Performance Test
I am testing an application that loads an Active X control for entering some login information. While recording, this control works fine and I am able to enter information and it is recorded. However on playback in the playback window it has the error "An
add-on for this website failed to run. Check the security settings in Internet Options for potential conflicts."
Window 7 OS 64 bit
IE 8 recorded on 32 bit version
I see no obvious security conflicts. This runs fine when navigating through manually and recording. It is only during playback where this error occurs.Hi IndyJason,
Thank you for posting in MSDN forum.
As you said that you could not playback the Active X control successfully in web performance test. I know that the ActiveX controls in your Web application will fall into three categories, depending on how they work at the HTTP level.
Reference:
https://msdn.microsoft.com/en-us/library/ms404678%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
I found that this confusion may be come from the browser preview in the Web test result viewer. The Web Performance Test Results Viewer does not allow script or ActiveX controls to run, because the Web performance test engine does not run the, and for security
reasons.
For more information, please you refer to this follwoing blog(Web Tests Can Succeed Even Though It Appears They Failed Part):
http://blogs.msdn.com/edglas/archive/2010/03/24/web-test-authoring-and-debugging-techniques-for-visual-studio-2010.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to add new browser type in visual studio 2010 performance test?
Hi All,
Currently we have various list of browsers in browser type drop down,Suppose if i want to add browsers like Internet Explorer 9 (or) 10,Firefox 33 (or) later version.How to add?Thanks for Adrian's help.
Hi Balaji,
Based on your issue, I agree with Adrian's suggestion. Therefore, I suggest you can try Adrian's suggestion to refer the link of Cybermaxs' reply check your issue.
In addition, I suggest you can use fiddler to check the header definition.
For more information, I suggest you can refer the Shiv_P's reply in the following link.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/9bb37eec-3467-4fcb-8537-648d04e91e2f/how-to-add-latest-chrome-browser-plugin-in-visual-studio-2010-ultimate-for-performance-testing?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
SAP Personas - Performance Testing using LR
Hi,
We are attempting to do Performance Testing on SAP Personas. For that end, we are trying to create some script using LR. However, there is a parameter which seems to contain some session information and we have been unable to locate it on the server response in order to correlate it.
This is the parameter I am referring to which appears on the LR recording:
web_custom_request
("xml",
"URL=http://myserver:8001/sap(cz1TSUQlM2FBTk9OJTNhc2FweHJhX1hSQV8wMSUzYTRvUElUSmNyX2x3VmhwRkJ2aHhMT1RDQzVsbGxOZFZULS1JZjBIUVktQVR)/restgui/batch/xml",
At this point, the script fails with a HTTP 400 message.
I found certain similarity between the string above and the one on included on a cookie, almost at the start of the recording:
set-cookie: sap-appcontext=c2FwLXNlc3Npb25pZD1TSUQlM2FBTk9OJTNhc2FweHJhX1hSQV8wMSUzYTRvUElZNER1YnB6Wk9mNlV2dExtbDJTOWwxbGxOZFZUOXZKQjBXckItQVRU; path=/sap(bD1lbiZjPTEwMA==)/bc/bsp/persos/mainapp
Notice how from the strings match on 40+ characters...
As for the other part of the sting, it does not appear anywhere on the server response.
Any ideas would be greatly appreciated!
BTW, we are using LR 11.00Hi Ricardo,
I have never worked with LR but I can help you understanding the sequence of requests.
Before the first post request ending with restgui/batch/xml is sent, there should be a get request ending with /restgui/newsession?sap-client=XXX. The response to this request contains the session ID you are looking for in its body.
Cheers,
Tobias. -
Database Performance Testing Planning Material
Hi All,
Could anyone please share Performance Testing Planning Material available at any site or anyone used in any projects previously?
Would appreciate if anyone could help!
Thanks for your time!
Regards,Hi Forstmann,
Many thanks for the information.But I require Performance Testing plan materials wher it has been performed in existing systems.
The material link what you have pasted refers to Performance tuning guide.
Regards,
Maybe you are looking for
-
Just installed CS5 onto new computer. Adobe bridge and CS5 do not recognize CR format. How can I get this installed. I have tried up dating and downloading the CR6.7 update, but can not get it to install. What do I do?
-
How do I get my Itune files from Windows XP to Windows 7?
-
Decimals in Haley Office Rules
Hi, we are using version 9.4 of OPA / Haley Office Rules. Rulebases are deployed on the Determination Server, running on IIS6.0 / .NET2.0 / Windows server 2003. Rulebases are invoked via web services, from a .NET 2.0 client. One of the attributes in
-
H77MA-G43 BLUE SCREEN in XP Pro
Today I did build a computer to a customer, I used H77MA-G43 and Intel Core i3 2100 3,1Ghz, 4Gb corsair 1333Mhz memory. When trying to install XP Professional on the new WD Blue-500G-drive I recieve bluescreen of death before the installation starts
-
WinCVS 1.3.17 and JDeveloper 9.0.3
I tried to activate source control CVS inside JDeveloper. In the tools menu I activated CVS, but I got always the message "The CVS client is not installed or not located in your system environment path". I'm working with a Windows2000 machine. WinCVS