BPC Task Profile description

Hello everybody,
Does anyone know where can i find the description of the activities assigned to each task profile in BPC?
Thanks in advance!
Nidia Olguí

This is not true at all.  BPC 7.5 MS has additional tasks that are not defined in the documentation referenced above and others that have been renamed from what the 7.0 MS documentation states.
New for 7.5: ManageDrillThrough, EndUserDrillThrough, ManageEVDREDefaultStyle, RemoveBPFInstances, ReopenBFPStep, ResetBPFInstances, PackageExecute, ManageTransport.
Renamed in 7.5: Lockings now called Manage Data Locks & Work Status
Gone from 7.5: JournalReport
Good luck finding what all this stuff does.  It would be nice if SAP updated their documentation or at leats made it clear where their customers can find it.

Similar Messages

  • Security - Task Profiles - Task Description --- Where to be found?

    Hello there,
    I have been searching my fingers tips bloody! ... Many BPC 5.1 and 7.0 documentation, dont bother mentioning ANY Description for the any tasks under the task interfaces.
    May somebody please post (copy / paste) DESCRIPTION, what exactly each TASK means and / or  gives access to?! --- Security would like to know for certain!
    It's much appreciated.,
    Maximilian
    Edited by: Maximilian Weisheit on May 12, 2009 12:15 AM

    Hi peter,
    thank you for your note. - I went back into the SAP Library File that came with the BPC 7.0 NetWeaver version. And surprisingly, there was no TASK PROFILE DESCRIPTION Table to be found. I went through every search result coming from the "TASK" search. No such table.
    Do you mind taking a moment to Copy / Paste the table you referring to in the forum post here. Alternatively you may contact me through the profile contact.
    Eitherway, It is highly apreciated, as I am not able to access a MS BPC Help File from here.
    Kind Regards,
    Maximilian

  • BPC security - task profile definition

    Hi all,
    I am trying to create a task profile which contain only the 'AppSet' task under 'Administration' interface. Here are the situations I faced: (I am using the default user when setting up BPC Server which has all authorizations)
    1. If I checked 'System Admin' in Step 1, I can not remove the other task 'Define Security' in Step 2.
    2. If I did not check any existing admin role, I can not even see the 'Administration' interface in Step 2.
    May I ask your opinion on how could I resolve this?
    Thank you all in advance.
    Eric Lin

    Eric,
    You want to create a brand new profile with every task available in BPC.
    I had the same problem and found SAP table in BI. I think if you modify this table, you can manage the security as you want but I didn't try this method.
    In sap BW, transaction se16, all the security table begin by UJE_ :
      UJE_TASK_SEC u2013 Task table (Application, Dimension,u2026),
      UJE_TASK u2013 Task Interface (Administration, Audit, u2026),
    KR,
    Samir

  • BPC 10 Microsoft Security - Task Profile

    My client wishes to assign the ability of Dimension member maintenance to only the System Admins.  I have moved the Dimension Member Maintenance out of the available tasks for the other group.  However, the other group may still add and delete Dimension members.  For example, Account member.
    Has anyone experienced this problem?
    Thank you

    Hi Sean,
    by default dimension mantaince is assigned only to SystemAdmin, if you have other groups that can modify dimensions simply eliminate "Manage Dimensions" and "Manage Models" from their security task profiles.
    Regards
         Roberto

  • How to further restrict the task profile 'dimension' to selected dimensions

    Hi All,
    We have a dimension which we require users to maintain their own master data. We have used the secondary admin task profile which provides default access to the task 'dimension'. THis allows that user access to the BPC Admin console and also to the dimension to maintain dimension members. However, we wish to limit their access to only certain defined dimensions & not give them access to all dimensions. I have tested using this task profile together with a member access profile to limit the secure dimensions for an application, however my understanding is that member access profiles will not restrict access once a user has logged into the BPC Admin Client...i.e the member access profile restricts the ability to read/write to 'facts'/sign data from a BPC front end tool, EG excel.
    Any ideas much appreciated as to how to acheive this,
    Glen

    Hi,
    As you said for maintaining dimension members, you had to assign a task to the task profile. However, assigning this task will allow the user to modify any of the dimensions.
    You cannot give authorization to allow only selected dimensions. BPC doesnt have this feature. Either the user can modify all the dimensions or none of them.
    Hope this helps.

  • Manage dynamic hierarchies - Task in Task Profile

    Hello BPC Cracks,
    I have a problem to assign a user/team the rights to manage dynamic hierarchies (DHE), anybody knows witch task should I assign to the user/team in Task Profile. (In the admin guide there is no entry for this topic). The Task Profile has already the Task u201CSubmitDatau201D and the menu eSubmit appears in the Excel front end.
    Currently I have a member access profile, with rights for the ownership dimension read and write for all entities, but in the menu eSubmit the entry manage dynamic hierarchies does not appear.
    Thanks,
    Biagio

    Thanks Biagio,
    The Note 1509322 worked for me. Ta
    I applied it to a custom task profile that already had various specific tasks assigned to it (Just not Business Rules)
    By adding Secondary Admin in the checkbox, it wiped out my original specific tasks, which I then had to remember and re-apply.
    All working now.
    Regards
    Nick

  • Profile description is not visible from Application which the LDT file has.

    Experts,
    I am running into strange issue.
    Dev created a LDT file for a profile and requested to upload it through a one-off patch.
    The profile got updated into the DB for all the 3 languages - US, KO and AR.
    However the description is not visible for US when tried to verify from the Forms.
    Further analysis gave a tip that the description is NULL only for US and exists for other 2 Langs (KO and AR).
    SQL> select PROFILE_OPTION_NAME, DESCRIPTION, LANGUAGE, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATED_BY, CREATION_DATE
    2 from fnd_profile_options_tl where
    3 profile_option_name='INL_ITEM_CATEGORY_SET';
    PROFILE_OPTION_NAME DESCRIPTION LA LAST_UPDAT LAST_UPDATED_BY CREATED_BY CREATION_D
    INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be  AR 09-NOV-12              122        122 11-JUL-11
                              LCM trackedسÙÙ
                                             اÙ
    ٠سÙÙ
          اÙ
    ٠سÙÙ
          اÙ
    ٠سÙ}
    INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be  KO 09-NOV-12              122        122 11-JUL-11
                              LCM trackedâ
                                          ¦'+++ '+++ '+++ '+++ '+++ '+++ '+++ '++
                              +Ã
    INL_ITEM_CATEGORY_SET                                                                            US 12-MAR-12             *2330*        122 11-JUL-11
    SQL>
    Also identified the Last Updated By is from FND User - "PROCESS_OPS"
    SQL> select USER_ID, USER_NAME from fnd_user where USER_ID in (122, 2330);
       USER_ID            USER_NAME
           122               ORACLE12.2.0
          2330              PROCESS_OPS
    SQL>
    What could be the reason behind this change?
    Why the profile description only for US Lang is not getting updated whereas for other languages it got updated by FND User - "ORACLE12.2.0"?
    It clearly shows on 09-Nov-12 there were some changes happened and that to by User_ID 122 which updated for KO and AR.
    For some reason the same was not applied for US Lang.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    HI Hussein,
    I am waiting for your update only.
    We have requested Dev to chek the same got to know that,Yes, when tried with CUSTOM_MODE=FORCE, it is working fine.
    But they are insisting on how the other Langs got updated and why it would not update for US alone.
    Just check the Profile from FND_PROFILE_OPTIONS about the profile details and found below.
    SQL> select APPLICATION_ID, PROFILE_OPTION_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATION_DATE, CREATED_BY
    2 from fnd_profile_options where PROFILE_OPTION_NAME='INL_ITEM_CATEGORY_SET';
    APPLICATION_ID PROFILE_OPTION_ID LAST_UPDATE_DATE LAST_UPDATED_BY
    CREATION_DATE CREATED_BY
    9004 1011555 12-MAR-12 2330
    11-JUL-11 122
    SQL>
    For some reason the TL got lastupdate_date and 09-NOV-12 and the same is not reflecting in FND_PROFILE_OPTIONS.
    Please advise.

  • ICC profile description is invalid

    I loaded PSE 8 on my Dell M1530 running Vista.  Whenever I try to start PS8 I get "could not initialize Photoshop because the ICC profile description is invalid" and the program quits.  I've tried removing and reinstalling PSE8 and it still errors.  Any idea what I can do?

    There are three steps in installing a color profile in Windows. First they have to be in your system32 (or syswow whatever\spool\drivers\color folder. Then as you have done you run the install. But then you have to register the profile for the device type (display\printer\etc.).
    I think placing the color space profiles has already been covered in another reply.
    You have already reset preferences so PSE has rebuilt its cache of scripts and resources.
    Switch the default monitor profile in Win color management applet to another to another one just to see if that solves your problem. PSE doesn't offer a choice of display profile so I imagine it uses your set default.
    Also there are two profile version types. Version 4 trips uup some applications especially for printing. Version 2 should be used for displays and works best for printers as well.
    These Win utilties will show the version type:
    http://www.color.org/resource2.xalter get
    ICC Profile Inspector - opens an ICC profiles and makes the contents readable
    Profile Dump - an example utility built using SampleICC that reads profiles and checks them for conformance
    In each you'll see the complete version number. In one of those two you have to switch thefile type to .icm or .icc. The other shows both.

  • Reg: Access the container element value inside the Task's description tab

    Hi All,
          I need to call one of my container element into the task's description tab as text symbols.
    Please let me know how to do it.
    Regards,
    Selva.

    define an importing element in the task container.
    map this importing element with the element in the workflow container.
    now you can use this task container element in your description text box. (method exxplained in the previous post to this problem)
    rgds,

  • Authorization profile description

    hi experts,
    In tcode su01, we have authorization profile and its description for a user.
    I have a report in which authorization profile has been displayed. I need the <b>authorization profile description</b> next to it. I found the field PTEXT in table USR11 has got the description. However i dont have any relation (key) between  USR11 and (usr01, 03, 04). Kindly suggest me some idea to get the description.
    Thanks in advance.
    Senthil

    hi Senthil,
    Check
    UST04                          User masters                        
    UST10C                         User master: Composite profiles     
    UST10S                         User master: Single profiles        
    UST12                          User master: Authorizations         
    USTUD                          Students                           
    Regards,
    Santosh

  • BPC7.5 task profile for only dimensions

    Hi Im planning to design a task profile in which it should have access to only dimensions with read only access.
    i have gone through secondary admin but he could change dimension.
    I will be glad if some one can help me how to approach this.
    Thank You

    You're right roberto, for us also it is working fine if we use it like this.
    We use now the FORMAT property to be able to manage format of display for the accounts without having to change all the screens and reports ...
    Anyway, thanks for you answer
    Anyone else tried ?

  • Task Profile-Worksheet Dimension Lock Options

    Setting the security to allow a user to use the Worksheet dimension lock options for a report is simple enough.  What I can't find is the lowest level of security settings needed to allow it for Input templates.  I have users with task profiles allowing them to edit this for reports, but if they open an input template in the same application, then the option goes away.
    Any help would be appreciated.  Hopefully I don't have to make them some form of admin.
    Thanks,
    Jason

    OK, so let me try to explain it differently.  The choice a user can select in the Action Pane is called "Worksheet dimension lock options".  This allows a user to lock down the current view for a worksheet.  Visually, this results in the dimension selection in the current view becoming greyed out.
    Controlling security to this feature for report templates is done via a task profile using AnalysisCollection-ManageTemplate.  Granting this security does NOT allow the user this same feature for input templates.
    What task needs to be assigned to a task profile to allow the "Worksheet dimension lock options" choice in the Action Pane for input templates?
    Thanks,
    Jason

  • Remove old profile descriptions

    Hi, I need to remove unwanted profile description as this just keeps on growing. Pls help

    Article ID: KB28225 BlackBerry smartphone must be security wiped before transferring ownership
    If the above has been done, and an old number still appears, try dialing ##000000 from the handset and press the call key. You should enter the device edit screen where you can delete that number.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Substitution Management - Profile description

    Hi,
    creating a substitution rule via UWL standard is working fine.  But what I need to know is how can I customize the "Create substitution rule" view?
    When I have poped up that view I can choose between different profiles (default ALL, disciplinary...). If I choose "All" an description text for the profile appears under the drop down box  (default for profile ALL: "The nominee is the substitute for all tasks")
    Now I want to change the description text - is it possible?
    Can I setup description text also for the other profiles?
    Thank you for your help
    Karli

    HI Hussein,
    I am waiting for your update only.
    We have requested Dev to chek the same got to know that,Yes, when tried with CUSTOM_MODE=FORCE, it is working fine.
    But they are insisting on how the other Langs got updated and why it would not update for US alone.
    Just check the Profile from FND_PROFILE_OPTIONS about the profile details and found below.
    SQL> select APPLICATION_ID, PROFILE_OPTION_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATION_DATE, CREATED_BY
    2 from fnd_profile_options where PROFILE_OPTION_NAME='INL_ITEM_CATEGORY_SET';
    APPLICATION_ID PROFILE_OPTION_ID LAST_UPDATE_DATE LAST_UPDATED_BY
    CREATION_DATE CREATED_BY
    9004 1011555 12-MAR-12 2330
    11-JUL-11 122
    SQL>
    For some reason the TL got lastupdate_date and 09-NOV-12 and the same is not reflecting in FND_PROFILE_OPTIONS.
    Please advise.

  • Could not save because the ICC profile description is invalid

    I'm getting this error whenever trying to do a "save" or "save as" from Photoshop CC. I've tried converting to different color profiles but that doesn't seem to make a difference. Even if I create a new blank document and try to save it, I get the same error message.
    I'm on a Mac running 10.8.5. Doing a search for the exact error message has come up empty. Previous versions had a similar error but it occurred upon opening a file, not saving. So if anyone has some thoughts, it would be greatly appreciated.

    Same error intermittently on different files. Windows7 64bit CS4. Saving a file in Photoshop - working from local hard drive - and got the file in use can not save error. We tried changing the name, saving as a different file type with no success. I closed absolutely every application that was running and then stopped all non windows processes from Task Manager and still file in use.
    I was finally able to save by choosing "NONE" for the preview instead of Tiff 8-bit in the save options.
    The bug is in Photoshop and it is putting a file lock on the preview file that it creates and then not alowing any save with the preview option checked.
    After saving without a preview we could close PS and reopen then open the saved file and resave with the preview selected. Closing PS unlocked the preview file.

Maybe you are looking for