BPC Transport Too many characteristics (024) are assigned to dimension

Hi Gurus,
We are implementing BPC Consolidation for NetWeaver 7.5, and we're facing the following situation:
Too many characteristics (024) are assigned to dimension /CPMB/Q6IW0EVD
Diagnosis
Too many characteristics are assigned to the given dimension.
For a "normal" InfoCube, the database table to be created for a dimension may contain a maximum of 249 fields. This means that no more than 248 characteristics may be assigned.
However, if the property "DIMIDs One-to-One" is set, a unique index on the characteristics of the dimension is created. In this case each dimension may not contain more than 16 characteristics.
Any suggestions?
Thanks in advance
Best Regards
Abraham Méndez

Hi Sheldon,
Thanks for answering my question.
I already ran that full optimization you talked about but i dont see some changes in BW, what i can see is the shadow cube that the full optimization creates but i cant see how the full optimization solves that bunching of too many BPC dimensions on one BW cube dimension afterwards.
The fact is that when the transport order generated by BPC transaction UJBPCTR is imported into the Productive environment the error still raising, with the same description:
u201CToo many characteristics (024) are assigned to dimensionu201D
Could you help me by telling me how full optimization solves that dimension bunching? Another question is Why does the error appear until the transport order is imported and not when you are working in development?
Thanks in advance.
Regards.
Abraham Mendez.
Edited by: Abraham Mendez on Apr 29, 2011 5:13 PM

Similar Messages

Too many archived documents are suddenly extracted into BW

Dear All,
I am not person of Finance but I will try to provide necessary details here.
We have archiving in place in ECC. For a specific document, if I go to FB03 for the document, it shows the information but with message that 'Document is already archived'. Document is related to year 2011.
Now, suddenly too many documents were extracted last week spanning from year 2009 to 2011. When I check in 'Document changes', it shows that last change was done in 2011 only.
I want to know what possible change could cause these archived documents to extract again into BW.
or any pointers are also welcome.
Thanks,
Purvang

If you bought it from Apple, you are covered by one year of AppleCare, which includes three months of free phone support, for any problem. You should take full advantage of that. It sounds like you may have hardware issues (the audio jack) but a lot of your items sound like a matter of changing preferences or display settings - Apple can help with this, as can a local friendly Mac consultant.
For example, you mention that you get a "screen-wide mass of writing". Do you know what application you're opening the file in? Many Mac apps have full-screen mode, which sounds like what you describe, and you can get out of it by moving your cursor to the top right of the screen until you see the menu bar appear - there's a blue icon with two arrows, and clicking this will get you out of full screen mode.
QuickTime does not play all formats of video. Try an alternative video player such as VLC. (http://videolan.org/VLC)
Hope that helps somewhat.
Matt

I want to go back to Firefox 4, where can I find a download of Firefox 4? I will eventually use FF5, but just now too many add ons are not available

where can I find a download of Firefox 4, I feel uncomfortable with FF5 because so many add-ons are still missing, I will eventually use FF5, but right now I want to go back to nr. 4

Try using the Add-on Compatibility Reporter to override compatibility. 
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Firefox 4 versions aren't supported by security updates that are included in Firefox 5.0 and Firefox 3.6.18. If you are gonna "go back", use 3.6.18 instead. 
http://www.mozilla.com/en-US/firefox/all-older.html

Too many class files are creating.....

Hi,
I am using SwingUtilities.invokeLater() method to update my JTextPane.it is working fine but it is creating number of class files depends upon how many times i am calling SwingUtilities.invokeLater() method....In my application i am calling SwingUtilities.invokeLater() method 5 times so it is creating 5 class files.
So pl let me know the solution to avoid the same.............thnx

In my application i am calling
g SwingUtilities.invokeLater() method 5 times so it
is creating 5 class files.
So pl let me know the solution to avoid the
same............So why is this a problem?

Ipod disconnects when too many usb devices are connected?

i have a gigabyte 7VTXE motherboard, the right via drivers and XP sp3
usb devices where it works:
keyboard, mouse, ipod
if i connect a hauppauge USB tv box or my speedtouch ADSL modem, it disconnects sometime soon after
has anyone else heard of this? annoying isn't the word....

You may be exceeding the total power available on the USB bus. If that is the case, one solution may be to get a self-powered USB hub. Connect the iPod and other devices that are frequently connected and disconnected on-the-fly to the hub. This will also reduce wear-and-tear on the more valuable USB ports on the computer. You can always get another $20 USB hub. Make sure it is the type that has its own power supply.

I am having too many crashes, here are the crash reports you asked for. i could not find my prev. question

bp-5f8e58cf-fcb4-4f11-8f2c-cf56a21408168/16/1410:30 AM
bp-f7b9efc5-7d98-4248-a2a4-83a6421408138/13/143:05 PM
bp-cbc9ed1d-71e9-4f19-bc80-2e2bf21408138/13/143:01 PM
bp-2a407f83-939e-4f2e-bdc5-5afc421408068/6/141:48 PM
bp-13db4505-382b-4f07-824f-0abb621408068/6/141:45 PM
bp-8bd610d4-ab38-4e33-9b0e-72a1121408068/6/141:42 PM
bp-03d17481-3bc3-409f-a3b6-d1eb721408068/6/141:30 PM
bp-1a7282f2-140e-436a-b3d0-1d47421408068/6/141:26 PM
i have had a total of 21 crashes since the beginning of june....
please resolve this problem. my business depends on it.

Your original thread is here : https://support.mozilla.org/en-US/questions/1015800?esab=a&s=&r=1&as=s

Firefox crashes when too many images are opened

Okay, so, a problem that appeared in 4.0 for me, and hasn't gone away ever since.
The problem is basically summarized in the short description - whenever too many heavy images are in the browser's tabs simultaneously, it slows down to a halt; then sometimes as I scroll it fails to redraw the page, with black non-redrawn area increasing as I scroll and disappearing as I change tabs back and forth.
After a dozen seconds of such sad behaviour, the browser crashes.
Sometimes, however, things go better. And it just crashes.
The problem can be easily replicated with Save Images extension, say, on any photo hosting, or by opening
http://danvolodar.livejournal.com/friends/big_picture
It should be noted that 3.6 never had that problem, and opened pages where I aggregated thousands of images, - slowly, of course, but it ''did'' work. 4 and 5 do ''not''.

Go to the address '''about:crashes''' and tell us your latest crash IDs. We can then look at the data specific to your crash and have a better idea of what is causing the problem.
Or you can go to '''Start''' and type in the Vista search box '''%APPDATA%''' then click on '''Roaming''' then go to '''Mozilla>Firefox>Crash Reports>Submitted''' then open the .txt files and copy the Crash report ID that starts with '''bp-xxxxx-xxxx'''

Aggregates having too many partitions

I have come across a situation where the aggregrates has too many partitions and I cant correct this with RSRV checks.
This is the error message in RSRV.
"E table of aggregate 100157 has too many partitions"
There are many errors of this kind. How can I resolve this issue.
Appreciate your help..

Some Insights-
Take some time to go through it..
Numerous questions on this note made it necessary to talk a bit about E tables here as well since E facttables may also be partitioned. But they are only allowed to be partitioned by the time characteristics 0FISCPER and 0CALMONTH and only once they are activated. Any attempts to switch on partitioning after the activation has taken place and the cube has data (regardless whether in F or E table) is not supported at all. You have to do that by creating a second cube, partition that one and then load it from the first via an export datasource.
or
RE-PARTITIONING is the soln
http://help.sap.com/saphelp_nw04s/helpdata/en/b9/60c041a2236a24e10000000a1550b0/frameset.htm
The final tool for these E table partition related question will be delivered with the next release of BW as part of Netweaver 2004s. There will be a repartitioning tool allowing you to dynamically (well, you still shouldn't do this every day;-) change the partitioning range of a cube. And it will allow you to switch cubes to be partitioned which were unpartitiond before without going through the reload scenario that is necessary in BW 3.X (where X = 0, 1 or 5).
Since that tool is based on major rewrites of existing as well as creation of new functionality, it can not be downported to BW 3.X
Note 590370 - Too many uncompressed request
Hope it Helps
Chetan
@CP...

Too many distributed transactions

I am programming an application with JDeveloper 10g and ADF Framework. It is a application that only queries data (no modifications). I created ViewObjects based on sql queries and an application module.
The problem is that is I execute that application for some time, I get the following error:
java.sql.SQLException: ORA-02042: too many distributed transactions
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2346)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2660)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:457)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:387)
     at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:665)
As it is a query only program, i do not need transactions. How can fix this?
Thanks in advance

Hi,
this is information from metalink:
The ORA-2042 indicates that you should increase the parameter
distributed_transactions.
The ORA-2063 indicates that this must be done at the remote
database.
Explanation
If the distributed transaction table is full on either side of
the database link you get the error ORA-2042:
ORA-02042: "too many distributed transactions"
Cause: the distributed transaction table is full,
because too many distributed transactions are active.
Action: increase the INIT.ORA "distributed_transactions" or
run fewer transactions.
If you are sure you don't have too many concurrent
distributed transactions, this indicates an internal
error and support should be notified.
Instance shutdown/restart would be a workaround.
When the error is generated at the remote database it is
accompanied with an ORA-2063. In this case the parameter
distributed_transactions must be increased at the remote
database.
If there is no ORA-2063 the parameter distributed_transactions
must be increased at the local database.

ORA-02042: too many distributed transactions

1. I have been working on a portal application for several weeks.
2. Portal is installed in 1 instance and my data is in another instance.
3. I've had no ora-02042 problems in the devt environment set up that way.
4. I've recently migrated the application/pages to a test environment set up that way.
5. I've been working in the test environment for several days with no problems.
6. For some portlets on some pages I'm now getting:
<BLOCKQUOTE>quote:<HR>
Failed to parse query
Error:ORA-02042: too many distributed transactions
Error:ORA-02042: too many distributed transactions
ORA-02063: preceding line from
LINK_TO_TEST (WWV-11230) Failed to parse as PACID_SCHEMA -
select user_action.userid, action.name,
user_action.created_date,
user_action.created_by, action.action_id,
'del' del_link from user_action , action
where user_action.action_id =
action.action_id and user_action.userid
LIKE UPPER(:userid) order by USERID
ASC, NAME ASC, CREATED_DATE
ASC (WWV-08300)
<HR></BLOCKQUOTE>
7. I cannot find anything about this error in the db log files for either instance.
8. I've increased distributed transactions to 200 in the portal db and bounced
it. Still get the error.
9. No records in dba_2pc_pending or dba_2pc_neighbors in the portal instance.
10. I get the error in various reports and form LOVs at different times. Pages with a lot of portlets seem to be more prone to the error.
Here is a typical LOV error:
<BLOCKQUOTE>quote:<HR>
COMBOBOX LOV ERROR:
LOV: "ASIMM_1022.TITLE_LOV"
Parse Message: Parse as pre-set global: "PACID_SCHEMA".
Find Message: LOV is of type DYNAMIC (LOV based on SQL query).
Query: "select code display_column, code return_column from codes where table_id = 'OFFICER_TITLE' order by code"
wwv_parse.parse_as_user: ORA-02042: too many distributed transactions ORA-02063: preceding line from LINK_TO_TEST wwv_parse.parse_as_user: Failed to parse as PACID_SCHEMA - select code display_column, code return_column from codes where table_id = 'OFFICER_TITLE' order by code wwv_security.check_comp_privilege: Insufficient privileges. wwpre_utl.get_path_id: The preference path does not exist: ORACLE.WEBVIEW.PARAMETERS.217_USER_INPUT_ASIMM_5423428
<HR></BLOCKQUOTE>
Why are these select statements being interpreted as distributed transactions? Note:1032658.6 suggests I "USE SET TRANSACTION READ ONLY". Is this necessary? If so how?
What puzzles me is that this set up has been working fine for several days. I don't know of any changes to my environment apart from me increasing distributed transactions.
null

Hi,
this is information from metalink:
The ORA-2042 indicates that you should increase the parameter
distributed_transactions.
The ORA-2063 indicates that this must be done at the remote
database.
Explanation
If the distributed transaction table is full on either side of
the database link you get the error ORA-2042:
ORA-02042: "too many distributed transactions"
Cause: the distributed transaction table is full,
because too many distributed transactions are active.
Action: increase the INIT.ORA "distributed_transactions" or
run fewer transactions.
If you are sure you don't have too many concurrent
distributed transactions, this indicates an internal
error and support should be notified.
Instance shutdown/restart would be a workaround.
When the error is generated at the remote database it is
accompanied with an ORA-2063. In this case the parameter
distributed_transactions must be increased at the remote
database.
If there is no ORA-2063 the parameter distributed_transactions
must be increased at the local database.

Firefox crashes when too many (3) tabs/windows open

Firefox crashes if too many tabs (3) are opened, if 2 browser windows are open, in Yahoo mail (deleting npYState.dll did not fix it) and does not give me a crash report. Internet explorer is not having problems like this.
== This happened ==
Every time Firefox opened
== After downloading 3.6.6

Go to the address '''about:crashes''' and tell us your latest crash IDs. We can then look at the data specific to your crash and have a better idea of what is causing the problem.
Or you can go to '''Start''' and type in the Vista search box '''%APPDATA%''' then click on '''Roaming''' then go to '''Mozilla>Firefox>Crash Reports>Submitted''' then open the .txt files and copy the Crash report ID that starts with '''bp-xxxxx-xxxx'''

Too many restores

I had to do 3 restores in just one month. I bought bought it just in february and one I hhad to go to recovery mode to bypass the passcode I had put. 3 restores, all in just 3 months. Can somebody tell me why this is happening and how to prevent it. Please......

In my opinion, anything more than one restore is too many. What are you doing when it's freezing? Did you try uninstalling that game that was giving you issues? There has to be something on there that is causing your problems. So, a restart (sleep/wake + home) doesn't clear the issue? It can ONLY be fixed with a restore?
If there is something mucking it up, if you restore from backup, the problem is likely to be in your restore, and brought back every time you use a restore backup. Have you tried starting from scratch? Restoring it clean, and then slowly putting stuff back on? Music, then other media, and then a game at a time, to see if you can pinpoint what's causing the issues?

There are too many PIN changes associated with this account (Error ID: 30801)

how to solve this error on app world "There are too many PIN changes associated with this account (Error ID: 30801)" can anyone advice because I follow all the steps to solve it and no one answer me
I call the customer care using the free number then I call my provider to redirect me to blackberry customer care and no one help me
so is there any link can show me all the PIN which is assign to my account and manage them
Please Advice

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB25553 "There are too many PIN changes associated with this account (Error ID: 30801)" is encountered when attempting to login to BlackBerry App World
As you see, the way to resolve it is clear, and you seem to have reached some folks in your attempts that were not able to resolve it. Nevertheless, you should not allow them to fob you off...insist that the KB instructs the resolution path and insist that they make good on that.
aleyadma wrote:
so is there any link can show me all the PIN which is assign to my account and manage them
No.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

I have an iPhone 4S I have done the recent update 6.1 and now my App Store is not working when I go into the feature tab I get an error " too many HTTP redirects" how do I fix this ? The other tabs are working and it is working on my iPad also

I am having a problem getting into the App Store on my iPhone since the recent update, I have a 4s and it appears the feature tab is not working. When I try to go into the feature tab in the App Store I get a message "too many HTTP redirects" ?... Does anyone now hoe to fix this issue, the other tabs are working okay and everything is working on my iPad ?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

BPC Transport Too many characteristics (024) are assigned to dimension

Similar Messages

Maybe you are looking for