BPC upload from BW infocubes

Hi yo all,
in my BPC application I have activated the upload of data from BW infocube (chain /CPMB/LOAD_INFOPROVIDER). The source infoprovider contain more dimensions that BPC application and so I have created an aggregate on BW infocube. My intention is to speed up the load in BPC.
I don't see any performance increase so the question is: BPC data manager uses the BW aggregates or is only able to read directly the infocube?
Regards
Stefano

Hi,
Data extraction from BW infoprovider to BPC will not hit aggregates...its just extracted from Infocube directly.  To improve the extraction performance check whether Indexes built on infocube or not.
Thanks,
Raju

Similar Messages

  • Remove double records during data upload from one InfoCube to another

    Dear Experts
    We have transactional financial data available in an InfoCube including cummulated values by period . Some companys have 12 reporting periods (0FISCPER3) and some companys have 16 periods (but all 16 periods are not always filled) . The data must be prepared for a consolidation system which expects only 12 periods. Therefore I bulit up a routine with the following logik:
    If period > 12, result = 12, else result = source field.
    But as the data target is (must be) an InfoCube the new values with reporting period 12 are not overwritten, but summarised instead. This means the original records with period 12 and the new records - see example:
    Records before transformation:
    Period   Amount
    12          100
    13           120
    Records after transformation in the InfoCube:
    Period   Amount
    12          100
    12           120
    This would lead to the following aggregation:
    Period   Amount
    12          240
    But as the values per period are cummulated, the consolidation system only needs the last period. So there should be only  one record left in the InfoCube:
    Period   Amount
    12           120
    Is it possible to delete dublicate records or do you have any other idea to to keep only the record with the last period (e.g. period 13) and to assign the value 12?
    Thanks a lot in advance for your help!
    Regards
    Marco

    Hi,
    You have two options here, you can put DSO in between the Datasource and infocube, and load the delta using the change log.
    Second is use delete the overlapping request from the infocube, it will delete the previuos requests and load the new request.
    Check the below article:
    [Automatic Deletion of Similar or Identical Requests from InfoCube after Update|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719]
    Hope this helps...
    Rgs,
    Ravikanth

  • Delta upload from one InfoCube to another InfoCube

    Hello, Everybody,
    I have such situation:
    Data is loaded into Infocube A using web service. Into InfoCube A loaded data: item_1, item_2, amount, date.
    Field date in this case is used for handling data versions. I need to use the newest date data for my planning layouts (BW-BPS).
    Is it possible to have another InfoCube B and load into that Cube B only delta data from InfoCube A ? If yes, how could I do it?
    Thanks in advance!
    Best Regards,
    Arunas Stonys

    Hi Arunas,
    If your web service load is creating a "request number" in the infocube, you can create a variable on 0REQUID pick up the latest value. This could be used to filter your BPS data.
    You cannot identify delta from a cube as only addition of Key figure are supported. Delta are created by overwrite ODSs.
    Thanks,
    Jerome.

  • Data upload from R3 to BPC using filters

    We are facing a performance issue on the uploading data flow from R3 to BPC. Two steps have been set up.
    Step1: R/3 --> ODS --> BW CUBE (No filters and full mode)
    Step2: BW  CUBE --> BPC CUBE (Standard BW upload package)
    The first one (from R3 to a BW Cube) has no filters, so it loads every data and it takes too much time. However, the second one (from the Cube to BPC)  has filtering options, so we can only load the data we need to (we usually use entity and time filters).
    Both are executed from the BPC DataManager.
    Any advice to improve the performance of the first step? Could we join the step 1 and step 2 and get the filters from the standard BW upload process using a custom process chain?
    Does anybody have any experience using filters to reduce the amount of records on the data uploading from R/3 to BPC?
    BPC Version 7.50.15

    Hi,
    for example in BI data is stored as below
    GroupAcc - Date - Balance
    100000 - 12.12.10 - 400
    **I'm not quite sure how you are getting the above data from infocube.Are you directly loading data from PSA to infocube with out loading data into DSO -0FIGL_O10(General ledger(New):Transaction figures) ?
    To get required format of following data, no need to do any thing while laoding the data into BPC. Your BI infocube should maitain the data in below format.
    GroupAcc - Date - Balance
    100000 - 12.12.10 - 100 - (LC)
    100000 - 12.12.10 - 100 - (TC)
    100000 - 12.12.10 - 200 - (GC)
    To acheive above format of data in the infocube please follow standard way of data flow given by SAP in BI Contect(http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e6/f16940c3c7bf49e10000000a1550b0/frameset.htm).
    Flow should be
    R/3 --> PSA --> DSO -->Infocube.
    In this flow its important to remember about infoobect 0CURKEY_TC in DSO.
    This is always the currency key of the transaction currency; it is also filled for records with a different currency type. Without this key field, postings with different transaction currencies would be overwritten after summarization and thereby be lost.
    (http://help.sap.com/saphelp_nw70ehp1/helpdata/en/a8/e26840b151181ce10000000a1550b0/content.htm)
    Once you follow the standard flow, your infocube contains the requried format (LC,TC and GC )of data to load it into BPC application.
    hope it helps...
    regards,
    Raju

  • Data Mart and Data Extraction from an Infocube

    Can a data mart which is built on one Infocube in BW support delta extraction? We have two separate BW systems and are trying to extract data from one Infocube in one BW (Source) and load it to one Infocube in another BW(Target)?
    We have built a data mart on the source BW infocube and have successfully been able to extract and load the initial data load into the target BW infocube. I noticed that the field 0RECORDMODE was not on the datasource that was created to support this data mart so my gut feeling is that we will not be able to do delta data extractions from this data mart.  Any feedback or confirmation of this?

    Hi,
    The InfoCube that is used as an export-DataSource is first initialized , meaning that the current status is transferred into the target BW. When the next upload comes around only those requests will then be transferred that have come in since the time of initialization. Different target systems can also be supplied like this
    Since it is request based ..data mart on info cube supports delta.
    Hope its helpful,
    Anu.

  • I need the Log Report for the Data which i am uploading from SAP R/3.

    Hi All,
    I am BI 7.0 Platform with Support Patch 20.
    I need the Log Report for the Data which i am uploading from SAP R/3.
    I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item.   In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
    I capture the FS item from the Z table then update this FS item to Infobject FS item.
    Now i  need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
    Please suggest.
    Regards
    nilesh

    Hi.
    Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
    In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
    Regards
    Jacob

  • Data is not uploaded from the dso to the cube

    Dear Experts,
    In one of my process chains the data is not uploaded from the dso to the cube .
    I have tried to upload the data month wise also but still after certain data records the data gets stuck up.
    I have recreated the indexes also.
    When I am checking in DB02 the table space is shown as 18491 MB.The used space is 97%.
    Please suggest.

    Hi.....
    I didn't get your point........what have you mention that you have recreated the index before loading....
    Basically.the process should be........Delete index --> Load --> Create index......
    You have mentioned that 97% of the memory space is in use........please check with the basis team once......
    Also, in SM37 check if any such job is there which is running for a long time but not progressing......or which you think you don't need......then kill that job......
    Regards,
    Debjani.....

  • I can can upload photos to my facebook page and the same problem with our fat cow web site. We can upload from both chrome and safari with no problem. Upgraded from 8.03 to 9.0 and same problem???

    we can not upload from the desktop to post on either facebook or to our fat cow web site. We have had fat cow upload from their end and have no problem

    Follow the instructions to uninstall then reinstall the Flash plugin then restart the Mac(s).
    http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,
    Help for deleting Flash cookies.  http://hints.macworld.com/article.php?story=20091114062050800

  • How to schedule Job for data uploading from source to BI

    Hi to all,
    How to schedule Job for data uploading from source to BI,
    Why we required and how we do it.
    As I am fresher in BI, I need to know from bottom.
    Regards
    Pavneet Rana

    Hi.
    You can create [process chain |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?quicklink=index&overridelayout=true]for data loading pocess and schedule start process to any time/date etc ...
    Regadrs.

  • How do i keep certain songs from being uploaded from my library to my ipod

    how do i keep certain songs form being uploaded from itunes to my ipod the check button does nothing
    30gig ipod   Windows 98  

    Set your iPod so you can manually manage your songs, see here for details:http://www.apple.com/support/ipod/tutorial/ipgettingstartedt3.html

  • I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone.  Can I access my music before all the artwork is uploaded from my computer?

    I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone.  Can I access my music before all the artwork is uploaded from my computer?

    Hi,
    You will no longer be able to sync manually with match. I would suggest that you wait until match has competed its process on your computer and that you are told how many tracks are in the cloud.
    If you activate match on your iOS device too soon, you may find that all your tracks are not there. Ps it is not just artwork that is being uploaded, it's music as well.
    Jim

  • How can I upload from photo library in my iPhone

    I recently added pictures from my mac (iphoto) back on my phone (after getting a new phone etc.) Now I have pictures in camera roll album, which I understand are the pics I am taking with the phone, then I have photos in the photo library which are photos I imported back from iphoto.
    What I don't understand and need help with is that photos that are in the photo library on my iphone I am not able to upload in say..facebook or instagram.
    Is there a setting I need to turn on? It only gives me an option to choose pictures to upload from the camera roll but not any other folder. HELP!!
    Thanks!

    go to settings > general > usage > music app under the storage section > slide across the bar that says 'photo library' and a red delete button will appear
    you can also plug the device into your computer with itunes, go to the photos tab at the top center and uncheck where it says 'sync photos.' then press 'apply' in the bottom right corner. this will erase the photos that were synced to your phone from the computer

  • How can i fix my mac book pro. My safari crashes all the time, my screen will turn black for no reason, My iPhoto crashes during upload from my iPhone, I can't highlight anything and I can't drag anything.

    Someone PLEASE help me! I cant figure out what is going on with my computer.  I don't install anything weird, but my brother does.  He's very good at computer tech stuff and is in I.T, but I cant help but blame him for all the problems my Mac is having.  Nothing works like it should.  My safari will randomally crash, my screen will randomally turn back, my iphoto will crash during uploading from my iPhone, I cant highlight anything, I can't drag anything.  When I want to click on something, I have to click over and over again just for it to even register.  I know everything is up to date and recently reset my PRAM.  I'm running Lion and have a lot of room on my hardrive.  I have an external harddrive and I'm wondering if I should just move all of my important files over to it and completly wipe out my computer's hardrive and start from scratch. 

    Some folks can't leave well enough alone, and insist on downloading all sorts of additional "stuff" that ends up making their Mac unstable.
    Standard Mac OS X on properly-operating Hardware does not crash, unless you start installing too many add-ons.
    You can run "just the basics" by holding down the Shift key at Startup. This does one pass of Disk Repair, then loads a minimal set of extensions, and comes up in Safe Mode. If it works OK that way, but crashes in "regular", it's the add-ons.
    There ia another layer of add-on junk that can be added to Safari. If the only remaining problem is Safari crashing, those add-ons can be disabled as well.

  • How can I get Firefox to save what folder I last uploaded from?

    I recently updated to FF 5.0.1 from some antiquated version of FF 3. I have set the download destination so that it always saves to the folder of my choosing, but it does not seem to remember the folder I last uploaded from. For example, say I wanted to find an image, save it, and then upload it somewhere (a common occurrence for image macros on chan boards). With the previous version of Firefox, I could save to something like C://User/Pictures and then click "browse" to chose the image I just saved from another site. It would then open up C://User/Picutres and I could click on my desired image.
    Now any time I restart Firefox the default upload source is the desktop. Previously Firefox would have saved information and would by default open up whatever folder I last saved to (or uploaded from if that was the last action). So if I downloaded to C://UserABC/Pictures/FunnyPics then Firefox would open C://UserABC/Pictures/FunnyPics for uploading. Now it goes straight to C://Users/UserABC/Desktop.
    This makes it a real pain to navigate BACK to the folder I do most of my uploading from every time I restart Firefox. How can I set it up so Firefox will once again open up my last saved-to or uploaded-from folder as it did before?

    Open ''Tools'' -> ''Options'' or, if that option isn't there, ''Edit'' -> ''Preferences'' and select ''Security'' from the resulting window. Click ''Saved Passwords'', which will open a dialog box with all the sites you have passwords saved on. Click the site your password changed on, and choose Remove. The next time you go to that site and input your password, you'll be asked if you want to save your password. Press ''Yes'' and it'll save your new password.

  • How can i keep my music from my iPhone and sync it my new macbook? Only purchased music seems to be available to sync, even though the rest of the music was uploaded from CD's on my  last laptop.

    Hi, I have changed from an old laptop to a macbook air. how can i keep my music from my iPhone and sync it my macbook? Only purchased music seems to be available to sync, even though the rest of the music was uploaded from CD's on my  last laptop.
    As I can't upload CD's onto the Macbook Air, how do I keep the existing music on my iphone syn onto my new macbook without deleting all the cds on the iphone??
    Many thanks!

    Hi RaulRod,
    Are you pressing the Sync button to transfer music after connecting your iPhone or do you have the option checked to 'Automatically Sync when the iPhone is connected?'
    Have you tried manually dragging and dropping music from your library into your phone?

Maybe you are looking for