Bpc7.5 calling bpc packages withinn ssispackages

All,
I am trying to find a good documentation as well as create SSIS package which will call import, manage dimension packages within SSIS. What are the steps to execute the task within SSIS package.
Thanks

The reason it takes time is Clear Package writes data into the DB with a -ve value .
So the best option would be to delete in the SQL if you have access to on the Fact Table dbo.tblFact%APPLICATION% after optimizing the Application so that all the required data from the WB and Fact2 are written into Fact Table.
The other option would be to import the "Clear from Fact Table" Package that in 'Examples' Folder under 'PackageFiles'..This folder would be in all Appsets that were created from AppShell. Be sure while using this Package as it may have impact on the usage of the Application.

Similar Messages

Triggering BPC Package Link from BW backend

Has anyone figured out a way to trigger a Package Link from the BW backend? We would like to run our standard BW process chain(s) to load Master Data and Hierarchies and THEN once that is successful, trigger the BPC package link to load the data into BPC... We'd like to do the same for transactional data too.
We were given function module UJD_RUN_PACKAGE_LINK but could not get it to actually do anything.
No hits on Google either.... well after this message there will be one hit
Thanks,
Eric

Jonathan,
Bingo!!
UJD_TEST_PACKAGE_LINK calls function UJD_RUN_PACKAGE_LINK which we were trying to do. We just must have messed up some parameters.
Anyway, UJD_TEST_PACKAGE_LINK works brilliantly!
For those reading this in the future....
1. Find your LINK_ID in table UJD_LINK. The CONTENT field gives you clues as to which one.
2. Execute UJD_TEST_PACKAGE_LINK.
3. Find your LINK_ID in the drop down and then hit enter. It will fill in your Appset Id and Appl Id.
4. Make sure you enter a user id to run it under (<domain>\<bpc userid>)
5. For our purposes we don't have any manual prompts so left it blank.
6. Save as a variant or simply just run.
7. Enjoy
Thanks again everyone.

Calling a package from shellscript

Hello,
I am trying to run open interface for GL. I am a newbie to oracle apps.
The flow and steps i am following are
1. Load some sample data into staging table using sqlldr.
2.Validate and insert the data into gl_interface using pl/sql package.
3. Write a shell script to call the sqlldr and pl/sql package.
4.Register the script as concurrent program in apps.
When i run this request ,the log file shows no errors. But the data is not loaded in gl_interface table.
I tried with a simple pl/sql procedure (not a package) it ran fine. The data was loaded.
ex:
sqlplus user/pwd<<EOF
exec sql_proc();
EOF
But now i have two different procedures, so created
a package. How do i call that package in the shell script. I also have IN parameters for the second procedure.
Should i mention them here (in the shell script).
i tried
sqlplus user/pwd<<EOF
exec package.sql_proc();
exec package.sql_proc2();
EOF
Any help would be really appreciated.
Thank you,
Srikanth

You can define the variables in your shell script to pass to the package/procedure for e.g. if you wanted to execute fnd_client_info.setup_client_info, your shell script would look something like this
p_usr_id=$1
p_app_id=$2
p_resp_id=$3
( sqlplus -s /nolog << end_of_sql
connect $p_sqlpwd
set head off
set feed off
set verify off
exec fnd_client_info.setup_client_info($p_app_id, $p_resp_id, $p_usr_id, 0);
exit
end_of_sql
)

How to call a package from the Report in Oracle Application Express

How to call a package from the Report in Oracle Application Express

Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

How to call a package in Oracle

I'm trying to call a package in oracle
(this is the oracle way of calling it :
begin pck$xl.get_year_low_high_to_date(:compid, 20010801 , 20020108 ",:year_low,:year_high,:year_average,:low_date,:high_date); end;)
but i can't get it right.
I'm new to package calling in Oracle from Java, till now i only worked with SQL statements without parameters of that kind, can someone help me with this?
ps the ":compid" is a parameter i have to fill in and provide...
thank you very much

ok here is a test i do...
but still doesn't work something about the bindvariables (check errorlog). I know a bit jdbc and i understant what you mean, but the problem is i don't know how this should go :(
please advise
import java.sql.*;
import java.util.*;
import java.text.*;
import java.io.*;
* @author U97488
public class test {
    public static void main(String[] args) {
        try{
            ConnectionSherpa cs = ConnectionSherpa.getInstance("ConnectionSherpa");
            Connection conn = cs.getConnObj();
            String sSQL = "begin?; pck$xl.get_year_low_high_to_date(?, 20010801, 20020801 ,:year_low,:year_high,:year_average,:low_date,:high_date); end;";
            CallableStatement stmt = conn.prepareCall(sSQL);
            stmt.setString(1, "BRU10");
            System.out.println(stmt.toString());
            if(stmt.execute(sSQL)){
                System.out.println(stmt.getString(2));
        }catch (Exception e){
            e.printStackTrace();
}StackTrace:
java.sql.SQLException: ORA-06550: Regel 1, kolom 6:
PLS-00110: Bindvariabele '1' is niet toegestaan in deze context..
        at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
        at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
        at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
        at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
        at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862)
        at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1839)
        at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1764)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2354)
        at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:909)
        at com.kbcsecurities.taminoupdate.servlets.test.main(test.java:28)

Calling a package procedure with Date parameter only

Hi All,
Please help me to call a package procedure with Date parameter from sql prompt.
Arif

Check the below procedure.
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure procdate (p_date_in date)
2 is
3 p_date_out date;
4 begin
5 p_date_out := add_months(p_date_in,6);
6 dbms_output.put_line(p_date_out);
7* end;
SQL> /
Procedure created.
SQL> exec procdate('01-JAN-2010');
01-JUL-10
PL/SQL procedure successfully completed.
SQL> exec procdate(to_date('01/01/2010','DD-MM-YYYY'));
01-JUL-10
PL/SQL procedure successfully completed.
SQL> exec procdate('31-DEC-2010');
30-JUN-11
PL/SQL procedure successfully completed.

Calling with package "Unlimited world 1 month" got...

Hello there,
I called with package "Unlimited world 1 month" into the land-line in Germany got interrupted regularly. How can I solve this problem?
Thank you in advance.
Spring

Hello there,
I called with package "Unlimited world 1 month" into the land-line in Germany got interrupted regularly. How can I solve this problem?
Thank you in advance.
Spring

Calling SSIS package in Stored Procedure...

I have a SSIS package, and i want to call this (run this SSIS package) from Stored Procedure in Sql Server 2008.
Can anyone please explain to me as to how can i call SSIS package from SP?
Thanks!
Rahman

Ted Kruger explains how this can be done in his blog post
Run SSIS Package from Stored Procedure
For every expert, there is an equal and opposite expert. - Becker's Law
My blog

Query response time takes more time when calling from package

SELECT
/* UTILITIES_PKG.GET_COUNTRY_CODE(E.EMP_ID,E.EMP_NO) COUNTRY_ID */
(SELECT DISTINCT IE.COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID =E.EMP_ID
AND IE.EMP_NO = E.EMP_NO
AND IE.STATUS = 'OPEN' ) COUNTRY_ID
FROM EMPLOYEE E
CREATE OR REPLACE PACKAGE BODY UTILITIES_PKG AS
FUNCTION GET_COUNTRY_CODE(P_EMP_ID IN VARCHAR2, P_EMP_NO IN VARCHAR2)
RETURN VARCHAR2 IS
L_COUNTRY_ID VARCHAR2(25) := '';
BEGIN
SELECT DISTINCT IE.COUNTRY_ID
INTO L_COUNTRY_ID
FROM DOCUMENT IE
WHERE IE.EMP_ID = P_EMP_ID
AND IE.EMP_NO = P_EMP_NO
AND IE.STATUS = 'OPEN';
RETURN L_COUNTRY_ID;
EXCEPTION
WHEN OTHERS THEN
RETURN 'CONT';
END;
END UTILITIES_PKG;
when I run above query its coming in 1.2 seconds.but when comment subquery and call from package its taking 9 seconds.query returns more than 2000 records.i am not able to find the reason why it is taking more time when calling from package?

You are getting a different plan when you run it as PL/SQL most likely. Comment your statement:
SELECT /* your comment here */then find them in V$SQL and get the SQL IDs. You can then use DBMS_XPLAN.DISPLAY_CURSOR to see what is actually happening.
http://www.psoug.org/reference/dbms_xplan.html

Calling a package function inside a sql

Hi friends!!!
First of all happy Christmas! And them please help! :)
We have a query calling a package function:
SELECT * FROM DW025H WHERE DW025H_NR=MPPCI.ENCR ('0000000000000000');There is a primary key just with one column DW025H_NR and the problem is that is not accessing by INDEX UNIQUE SCAN,
it's accessing by TABLE ACCESS FULL.
May be the problem is that we are calling a procedure inside the query?
I have been able to run that query accessing by primary key from my computer but a workmate hasn't!
We both are connecting the same data base 10.2.0.4 and using Oracle SQL Developer!
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 5343K| 1406M| 15670 (7)| 00:02:43 |
|* 1 | VIEW | DW025H | 5343K| 1406M| 15670 (7)| 00:02:43 |
|* 2 | FILTER | | | | | |
| 3 | TABLE ACCESS FULL| DW025H | 5343K| 1406M| 15670 (7)| 00:02:43 |
Predicate Information (identified by operation id):
1 - filter("DW025H_NR"="MPPCI"."ENCRIPTAPAN"('0000000000000000'))
2 - filter(CASE "OPS$SISINFO"."IS_USER_DNI"() WHEN 1 THEN
SYS_AUDIT('OPS$SISINFO','DW025H','CMINFOGR001',3) ELSE NULL END IS
NULL)
The correct path would be:
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 276 | 3 (0)| 00:00:01 |
|* 1 | FILTER | | | | | |
| 2 | TABLE ACCESS BY INDEX ROWID| DW025H | 1 | 276 | 3 (0)| 00:00:01 |
|* 3 | INDEX UNIQUE SCAN | PK_DW025H | 1 | | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(CASE "OPS$SISINFO"."IS_USER_DNI"() WHEN 1 THEN
SYS_AUDIT('OPS$SISINFO','DW025H ','CMINFOGR001',3) ELSE NULL END IS NULL)
3 - access("DW025H_NR"="MPPCI"."ENCR"('0000000000000000'))
Please any ideas!?!?!
Thanks a lot!
José
Edited by: jamv on Dec 20, 2011 10:50 AM

Hello
Have a read of this and try to pull together the information in it and post it up here. That will help immensely with getting to the root of your problem...
HOW TO: Post a SQL statement tuning request - template posting
In the mean time:
From the execution plan you have extra predicates that aren't present in the query you supplied, so that's either not the SQL or you have something like VPD switched on.
Anyway, there could be lots of reasons for the difference in execution plan. Sorry if this is very basic and possibly patronising question but it's always worth checking the basics I think - are you both definitely connecting to the same database? If so, have a look in v$sqlarea for this SQL statement and find the SQL_ID, use this to query v$sql and look at the child_number column.
select
    sql_id
from
    v$sqlarea
where
    sql_text like '%SELECT * FROM DW025H WHERE DW025H_NR=MPPCI.ENCR%(''0000000000000000'')%'
and
    sql_text not like '%v$sqlarea%'
select child_number from v$sql where sql_id='<enter the sql id returned by the query above>'as an example...
XXXX> select /* my sql statement*/ rownum id from dual;
        ID
         1
1 row selected.
Elapsed: 00:00:00.10
XXXX> select sql_id from v$sqlarea where sql_text like '%my sql statement%'
and sql_text not like '%v$sqlarea%';
SQL_ID
a6ss4v79udz6g
1 row selected.
Elapsed: 00:00:03.56
XXXX> select child_number from v$sql where sql_id='a6ss4v79udz6g'
2 /
CHILD_NUMBER
           0
1 row selected.   If you have more than one row in v$sql there could be differences in the optimiser environment. The supplied like shows you how to gather the information that should help find what the differences are if any.
Also as a side note if you're calling PL/SQL functions from SQL, you can take advantage of subquery caching to help reduce the number of calls (depending on your version). As it stands, your function is most likely going to be called for every row - when there is only a single row returned, that's not necessarily a problem but for multiple rows, the overhead can quickly grow. If there's no way to get rid of the function call, select the function from dual instead i.e.
SELECT * FROM DW025H WHERE DW025H_NR= (SELECT MPPCI.ENCR%('0000000000000000') FROM dual);This also (as I learnt a couple of weeks ago) works when you're using columns in the table your selecting from as parameters to the function.
HTH
David

Calling a package in Data template

Hi All ,
I am using Data template for XML generation and want to call a PL/SQL package.I have gone through some of the threads on the topic.
I have some doubts in this regard :
1)Can we have procedures inside package or its just the functions that can be called.
2)Does the package gets executed every time we generate the report.(It got executed for me just once).
3)The parameters defined in the data tamplte can be passed to the PAckage as well?
4) Is this supported on BIP 10.1.3.2 or XML publisher 5.6.2?
Thanks!!

Thanks for your detailed answer!!
I am trying to call a package just to understand how it works .This package just inserts a row in "suppliers" table.I ma calling this package through 'beforeReprot' trigger and querying the table after that.
I have written a package "test_pack" :
create or replace
package test_pack as
function test_insert_fun return boolean;
end test_pack;
create or replace
package body test_pack as
function test_insert_fun return boolean is
begin
insert into suppliers values (1,'p1','p2');
return (TRUE);
end;
end test_pack;
Data Template :
<dataTemplate name="test" dataSourceRef="demo" defaultpackage="test_pack">
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT * from suppliers]]>
          </sqlStatement>
     </dataQuery>
     <dataTrigger name="beforeReport" source="test_pack.test_insert_fun()"/>
</dataTemplate>
However after this , when I try to view data , I amnot seeing any output.When i go nad check the suppliers table in db, i dont see any values.
I believe this package should be executed everytime i view the data.
Please advice!!

Calling DTS package from Stored Procedure

I am getting error calling DTS package from CF.
So i want to call DTS package from SQL Server Stored
Procedure.
DTS package create text file. So no need of input or output
parameter.
What is the syntax?.
thanks for ur help.

Ted Kruger explains how this can be done in his blog post
Run SSIS Package from Stored Procedure
For every expert, there is an equal and opposite expert. - Becker's Law
My blog

Calling SSIS package from DTEXEC in SQL Server 2012

Hello,
I have a package called test.dtsx developed in SSIS vs 2010 (project deployment model). It has two project parameters one is db connection (string) and one is classnumber(string). This package has been deployed as file system and in SSISDB. I want to
assign the following values to the project parameters
$Project::DBConnection - Data Source=localhost;User ID=User;Password=password;Initial Catalog=testdb;Provider=SQLNCLI11.1;Persist Security Info=True;Auto Translate=False;
$Project::Classnumber - 10
What is the syntax to call this package from dtexec passing values for parameters
1. as a file system deployment
2. as a package in SSIS db(catalog)
thanks

http://msdn.microsoft.com/en-ca/library/hh231187.aspx has an example
Dtexec /isserver “SSISDB\MyFolder\MyProject\test.dtsx” /server “.” /parameter $Project::DBConnection;thevalue /parameter anotherparam(int32);12
Arthur My Blog

Can we call a package inside a package

Dear Sir
Can we create a package inside a package or can we call a a package inside a package?.If yes.How we can create and call a package inside a package?
Regards
Thakur Manoj

[email protected] wrote:
Dear Sir
Can we create a package inside a package NO, you cant do that.
or can we call a a package inside a package?.YES, you can do that. Just call it. <package_name>.<procedure_or_function_name>

How to call a package with ADO?

I have designed a package which include a procedure. And I have a program coded in ASP.
How to call this package with ADO. Please give a sample.

Hi,
I persume that you are facing this problem when u try to code in VB. If that is the case here comes the code.........
OraDatabase.Parameters.Add "A_NBR_NEWSID", A_NBR_NEWSID, ORAPARM_INPUT, 2
OraDatabase.Parameters.Add "A_NBR_TOPICID", A_NBR_TOPICID, ORAPARM_INPUT, 2
OraDatabase.Parameters.Add "A_NBR_USERID", A_NBR_USERID, ORAPARM_INPUT, 2
OraDatabase.Parameters.Add "result", 0, ORAPARM_OUTPUT
OraDatabase.Parameters("result").serverType = 2
OraDatabase.ExecuteSQL ("declare result Number; Begin :result := PKG_CONTENT_MANAGEMENT.FUN_GET_NEWS_PERM_BY_USERID(:A_NBR_NEWSID, :A_NBR_TOPICID, :A_NBR_USERID); end;")
OraDatabase.Parameters.Remove "A_NBR_NEWSID"
OraDatabase.Parameters.Remove "A_NBR_TOPICID"
OraDatabase.Parameters.Remove "A_NBR_USERID"
FUN_GET_NEWS_PERM_BY_USERID = OraDatabase.Parameters("result").Value
OraDatabase.Parameters.Remove "result"
Hope this clear your doubt..
Raj

Bpc7.5 calling bpc packages withinn ssispackages

Similar Messages

Maybe you are looking for