BPC75NW: Offline Distribution of reports does not work in Schedule mode

Hello BPC experts,
I'm new in SAP world.
I have the following problem.
In BPC 7.50.06 NW I'm trying to adjust the distribution on e-mail to schedule.
I set up Distribution List. When I start the Offline Distribution Wizard -> Distribute Now all works without problems.
The problem starts when I start the Offline Distribution Wizard in the Schedule mode. All the settings I do the same as at "Distribute Now".
Then I set the report should be sent daily, starting with 13.10.2011, indicating the Start Time. As a System password I'm pointing my domain password (I know no other passwords).
At the time specified in the Start Time nothing happens, i.e. the schedule does not work.
Tell me, please, if faced with a similar problem, how it can be solved?
Thank you for your help, this is greatly appreciated.
Regards,
Todoshi Takato

Moved to .NET SDK forum.
Search here, lots of post on IIS and setting Printer Access Permissions for your application.
Also search MSDN on what is required to for IIS to access local Printers.
Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
Don

Similar Messages

Print report does not work in built mode (LV7.1+XP)

Good morning,
I've read some threads about the topic in this Q, but no solution. So my hope is that NI has resolved the problem. Here it goes:
In normal edit mode I can use the Print Report.vi (using the default win printer) to print out some data. The generated report is a standard NI report (that is NOT HTML).
When building an application this no longer works. No data is passed to windows (the printer icon in the system tray never appears) - and hence no output on the printer!
I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet but I've also tried using the old stable Canon LBP 8 II on the FILE: port - but in .exe mode the file box does not appear.
I really hope that NI has a solution
for the problem since we need the built application on several client. And we do not want to pay for several LV licenses.
Speculations on both the application builder and report generation tools have been given in previous threads... However, these gave no solution and all threads are from before LV7.1.
Thanks in advance!
Martin

Skinny wrote:
> In normal edit mode I can use the Print Report.vi (using the default
> win printer) to print out some data. The generated report is a
> standard NI report (that is NOT HTML).
>
> When building an application this no longer works. No data is passed
> to windows (the printer icon in the system tray never appears) - and
> hence no output on the printer!
>
> I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet
> but I've also tried using the old stable Canon LBP 8 II on the FILE:
> port - but in .exe mode the file box does not appear.
>
> I really hope that NI has a solution for the problem since we need the
> built application on several client. And we do not want to pay for
> several LV licenses.
Are you sure you checked the "NI R
eport Support" under the Advanced
button of the Installer tab in the application builder?
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Smartview v11.1.1.3 drill through reports does not work in grids?

Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

Report does not work in 2nd instance after transported

My SAP Script report does not come out correctly after its transport into a 2nd instance. The fonts displayed in the report don't look the same like what we have in instance #1.
The report originally created in the instance #1 is good, but after the transport, the fonts in instance #2 are larger and some of the contents are not properly aligned. Some part of the boxes are also missing. I would appreciate any suggestions of how to fix them. Thanks, Sam

Hi,
There might be a possiblity that the necessary style used in the SapScript is not transported to the New Instance and hence the Cosmetic issues...
Check whether all the associated objects like Style are transported to nre Instance or not?

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

Validataion does not work in batch mode

Hello community,
We created an FI line item validation for transaction FBV1 that does a validation on a field and displays an error message if the validation fails. We have an RFC that uploads data from an Excel template and runs a BDC Call Transaction to upload and park the document. This worked well when we were on 4.6C but when we upgraded to ECC6.0, the Validation works fine when we manually call the FBV1 in SAP and the Validation DOES get triggered and displays a message if the line item validation fails but when we run FBV1 in batch mode, (RFC which contains a call transaction to FBV1) the validation does not work.
I set up break a point in the generated program GBTBOFID where the exception error gets triggered and traced the FI Validation. The program will not display the error Validation message when run in batch but when run online, the error message gets triggered.

Thanks for the prompt reply. I tryied a combination of the following options and did not have much luck with this one.
Data: x_options type ctu_params.
     clear X_OPTIONS.
     X_OPTIONS-DISMODE = 'A'.
     X_OPTIONS-UPDMODE = 'S'.
     X_OPTIONS-CATTMODE = ' '.
     X_OPTIONS-DEFSIZE = ' '.
     X_OPTIONS-RACOMMIT = ' '.
     X_OPTIONS-NOBINPT = ' '.
     X_OPTIONS-NOBIEND = 'X'.
CALL TRANSACTION 'FBV1' USING bdcdata options from X_OPTIONS
After the call transaction the program automatically triggers some SAP generated code for a Validation check for FBV1 line item that we have put in through IMG. The message that should be displayed is in the FI validation check of FBV1.
I put a break point in the SAP generated code for the Validation where the message should be displayed. The program executes the statement that should raise the exception and display the message. As soon as the statement is executed, conrol returns to the the the SAP transaction FBV1 program and the program continues to finish.
The statement that executes and does not display the error message is:
CASE valsevere.
        WHEN 'A'.
          MESSAGE ID msg_id    TYPE valsevere   NUMBER msg_nr
                  WITH msgv1 msgv2 msgv3 msgv4
                  RAISING abend_message.
        WHEN 'E'.    <=== *This option is true and the progam steps
                    " through the following message but does not display it.*
          MESSAGE ID msg_id    TYPE valsevere   NUMBER msg_nr
                  WITH msgv1 msgv2 msgv3 msgv4
                  RAISING errormessage.
        WHEN OTHERS.
          MESSAGE ID msg_id    TYPE valsevere   NUMBER msg_nr
                  WITH msgv1 msgv2 msgv3 msgv4.
      ENDCASE.
I should mention that in debug mode, I check the values of msg_id, msg_nr, msgv1 etc. and they all have values of a message class that we have created.
The above code is in a SAP generated program for FI Validation (GBTBOFI0, include FGBB100R).
-- We only have this issue when we use the FBV1 transaction in batch mode. Runing FBV1 directly online works fine.
-- The issue is unique to ECC 6.0 environemnt. We did not have this problem in 4.6C
Suggestions greatly appreciated.
Edited by: Rob Burbank on Jan 20, 2010 12:15 PM

Cache clear does not work in timer mode

Hi,
I am using the webshop (ISA) on CRM 5.
In the b2c/admin application you have the option to clear the cache, this works when I click "clear" (manually), but you should also be able to specify an interval (TTL), this does NOT work. Do I have to have a separate Timer of Notifier application running to make this work?
Kind regards,
Dick

I believe the voice control is activated when the home button is pressed for more than a few seconds, this only happens to me when I put the phone unlocked in my bag or trouser pocket and had to contact Apple phone support.
For anyone who needs step by step instructions (like me), whilst voice control is activated the phone responds differently until voice control is turned off.
1) Slowly, (using 2 fingers can help), slide to the right to unlock screen
2) Tap the first number in your passcode until a square appears around the number key. This shows that number is activated. Then double tap the number key and a dot should appear in the first box. Tap the next number key in your passcode until the box appears around that number and then double tap until dot appears and continue.
3) Main menu > Settings (tap settings until square appears and then double tap) >General (following double tap principle)> Accesibility> VoiceOver (on), slide to off (tap once to activate and slide to off).
If you haven't got access to your home computer when this happens, I hope this helps.

Format option does not work in reply mode re Bt Ya...

Hi There - I wonder if anyone has had this problem? When clicking on reply to a recipient's email I find that the format option does not work! (I use this to highlight my reply in a different text colour) It works fine when I compose a new email msg but not when using reply.
I am finding this switch over to this 'new improved' Yahoo email a nightmare to be honest. I would never have tried it out had I known I would not be able to switch back.
Why didn't I heed that age old saying 'why fix it if it ain't broke'
I would appreciate any help.
Many Thanks
Heddybell

Hi Stephanie
Thanks for replying to me.
No - none of those. Formatting just does not work! It was as if I had not tried to format - it just did NOTHING.
However, by some miracle (and believe me it was) I have been able to return to my old BT Yahoo Classic and the problem is no more!
Wow! That 'All-new Bt Yahoo Mail' leaves a lot to be desired! Thank goodness I got out of it even there was no 'Switch Back' available. Like I said "It was a miracle'!!!!!
Thanks again
Heddybell

HTMLDB_ITEM.date_popup on single row report does not work

Dear HTML DB Team,
On a report wit a single( one ) row the "HTMLDB_ITEM.date_popup" does not fill the selected date to the cell. (Same for wwv_flow_item.date_popup)
On the same report with 2 or more rows HTMLDB_ITEM.date_popup works fine.
Any suggestions?
Erik
testcase:
create region:
select htmldb_item.hidden(1,empno) empno,
ename,
htmldb_item.select_list_from_query(3,job,'select distinct job, job from emp') job,
htmldb_item.popupkey_from_query(4,mgr,'select ename, empno from emp',10) mgr,
wwv_flow_item.date_popup(6,null,hiredate) hiredate,
htmldb_item.text(7,sal,10) sal,
htmldb_item.text(8,comm,10) comm,
htmldb_item.select_list_from_query(9,deptno,'select dname, deptno from dept') deptno
from emp
delete 13 rows from emp ( 1 row left ):
delete from emp
where ename <> 'KING';
=> date_pop does not work

Using the htmldb_item API vs. built-in multi-row update functionality:
I can't speak to the question about the date for the next HTML DB release. But I'd like to add a few comments to this discussion regarding the use of the htmldb_item API package. It is generally advisable to use the built-in multi-row update functionality instead of htmldb_item function calls when implementing tabular forms. While I do acknowledge that some display types such as date popups are not yet available, I would nevertheless recommend working with what's available on the report column attributes page (i.e. using a text field for the date columns) as opposed to using htmldb_item functions whenever possible. Please keep in mind though that they are mutually exclusive, so they can't be combined on the same report.
The reasons for my recommendation are simple: first of all, if you use htmldb_item calls as part of your SQL statement, the HTML form elements are rendered for all rows in your result set. The built-in types on the other hand only render HTML form elements for those rows shown on your current page, thus you get better performance. Secondly, htmldb_item calls make your SQL statement quite complicated, not only has the engine to jump back and forth between executing your SQL and calling the PL/SQL functions, you also need to take extra care implementing your PL/SQL processes according to the item IDs you assigned in your htmldb_item function calls. When working with e.g. popup LOVs, this gets even more complicated because that type actually results into two html form elements for each column (one storing the hidden ID, one storing the display value). And lastly, by using the multi-row update functionality, you would get lost update detection automatically built. That means, that you can't accidentally overwrite another person's changes in the event that you should both be working on the same data. Implementing this kind of functionality with your htmldb_item based tabular forms would take a lot more effort than simply go with what's already provided.
So please carefully weigh the benefits of additional display types that you'll get by using the htmldb_item API against all the functionality you'll get by using the built-in tabular form and multi-row update features.
Regards,
Marc

Xl Reporter does not work after the upgrade to 2007A PL 47

Hi Experts
UPgraded to 2007A PL 47 from 2005A. Upgrade was done successfully. However the XL reporter is
not functioning. When you go to Tools and click on XL reporter nothing happens. No error message
comes up even.
Client is using SQL 2005 MS server 2003
I ahve done the test upgarde in an image of the live server
thank you
Regards
Aosara
Edited by: Apsara Senaratna on Feb 10, 2010 4:33 AM

Hi Thannga
The answer is no.
I believe when i logon to SAP add on at the bottom of the menu it should come up " connecting Addon: XL reporter" (i get this on other dB's when connecting to SAP)
Could this be related to the environment. As other than this there was no issues with the Upgrade.
Thank you
Regards
Apsara

Web service does not work in production mode

Hi!
I created a small web service with the WorkShop in BEA Weblogiv 7.0.
If I start the server in production mode, then my service is not visible. It can
not be accessed, neither its WSDL. In development mode it works. I tried to create
an EAR file and deploy it, but when I do that in the web console, it all says
that it is deployed, but I can not access the WSDL or anything else.
Does the WSDL URL change in production mode ?
Help !
Best regards,
David

Thanks for reply.
It seems nothing matters.
I changed wlw-config file:
     <hostname>localhost</hostname>
     <protocol>http</protocol>
     <http-port>8002</http-port>
     <service>
          <class-name>com.mycom.MyWS</class-name>
          <protocol>http</protocol>
     </service>
I changed wsdl soap address
to
http://localhost:8002/MyWS/com/mycom/MyWS.jws
I deployed it to managed server at port 8002 and admin server at 7001. but still, admin server works and the other one does not.

Push-replication pattern does not work in activeactive mode - infinite loop

Hi Gurus,
I have encountered some problems while playing with the example of push-replication / active2active pattern, and tried to fix them. But there is still one which is now beyond my current knowledge:
Issue 1: (fixed)
After download the latest Incubator example from the official website and run the push-replication / active2active example directly following the [readme] file, exceptions related to serialization / deserialization occurred. I then added the mockito-all-1.8.5.jar to the Incubator-example’s lib directory and the problem gone.
Issue 2: (fixed)
Running the example, and found that [update events] triggered by the active-server1 can be propagated to active-server2, but not for vice versa (active-server2 -> active-server1). I inspected the cache configuration file of active-server2 (active2-cache-config.xml), and found there should be a typo in it, as:
<event:remote-cluster-channel-scheme>
<event:remote-invocation-service-name>remote-site1</event:remote-invocation-service-name>
</event:remote-cluster-channel-scheme>
<remote-invocation-scheme>
<service-name>remote-sit1</service-name>
</remote-invocation-scheme>
This should be a typo, so I changed the remote-sit1 to remote-site1 and the problem gone as expected.
Issue 3: (pending)
After having the above 2 issues fixed, and re-run the example from scratch, this time I found the program can never end (infinite loop). From the log, I can see the update-count exceeds 5000 (expected value is 2000 which will trigger the program exit) and keep increasing????????
Could you please so kind give some hint? Thank you in advance!
Best regards
Hysun He

Hey Hysun He,
Issues 1 and 2 are now resolved in Incubator 11.0.0
Issue 3 looks to be a problem with the lack of a suitable base-case preventing eventual consistency between the sites.
Note: That the Auction example, which is also "Active Active" does not have this problem.
I've raise the following issue to track progress:
http://java.net/jira/browse/COHINC-19
Brian Oliver | Architect | Oracle Coherence

Apple External Modem FAX Does Not work in 64bit mode

Apple needs to update its Fax Driver to 64bit mode. Since upgrading to the i7 in 10.6.6, the system boots in 64bit mode which is great! Except i can't fax anymore from my MacBook. Research has shown that it only works in 32bit mode. I do not want to boot in 32 at this point. Anybody know of any other solutions, external fax modems or 64bit drivers or software that will work with the Apple External modem?

I am having similar issue. I can't order a new McBook Pro until I know I can fax directly from it ... its essential for me. I'm shocked no one as addressed your concern. Is Apple so arrogant when it comes to their business customers that they abandon fax/telephony technology with out a fall back position or warning to users?
I got used to Microsoft arrogance; but I was hoping more user concern from Apple.

BPC75NW: Offline Distribution of reports does not work in Schedule mode

Similar Messages

Maybe you are looking for