BPE customizing not fully maintained

Hi All,
i am getting the below CCMS alert repeatedly,
CCMS ALERT for MTE: PX1 \ PX1_500_Business Process Engine \ Overall status \ Status of the automatic customizing
Alert Details:
System        : PX1
Alert Text    : BPE customizing not fully maintained
Alert Color   : RED
Does some one give me any idea what could be the root cause of this message.
Thank You,
Madhav

Please run the SWF_XI_CUSTOMIZING transaction and select the "Perform Automatic Workflow Customizing".

Similar Messages

  • Error in LSMW for new matl-You have not fully maintained the descriptions

    Hi Experts,
    I am creating a LSMW to create a new material master, but at the end part get the error "You have not fully maintained the descriptions" Message no. MG171. I am using the Standard batch/direct input" and Program Name         RMDATIND.
    Can you please help me.
    Thanks and Regards,
    Amol Kale

    Amol,
    as description is mandatory field while creating material, you need to assign description text.
    also check are you maintaining multiple langauges during this material xreation , if yes, you need to give discription for all langauges.
    hope it will help you.
    Thanks
    Ritesh

  • Comnpany Code is not fully maintained

    Hi Experts,
    I am facing an below issue while creating the material master in SAP SD module.
    ERROR:"Company Code is not fully maintained".
    However when I checked my assignment by EC01 than it seem no problem.
    Please resolve it.
    Thanks in Advance
    Regards
    Amit Tyagi

    Go to OMSY, select your company code and maintain the current year and period there.
    Now create a new material and post the feedback.
    thanks
    G. Lakshmipathi

  • Tax classification not fully maintained

    Hi Gurus,
    I am uploading the MM sales data by using LSMW using direct input method RMDATIND program. while uploading i ma getting a error message as 'You have not fully maintaine the tax classification'. But while i am crating manually in the table control DIfferent countries are automatically coming(CH, IT, NE) in ALAND filed(in the transaction (MM01). all the customizations are done properly. but still i am getting same problem. is there any other program for upload data for MM Sales. BAPI or Stadard program. Thanks in advance.

    the sales organisation are linked to plants. depending on the plants country a record is expected for tax classification.
    So if you have to load records from different sales orgs, then you may have different countries for the tax classification.
    Each country needs to have an individual record in structure BMMH2
    see as well this thread:
    Re: LSMW Direct Input Method RMDATIND tax classification material

  • LSMW - RMDATIND - You have not fully maintained the tax classifications

    Hi,
    I am trying to extend existing materials to new sales organization through LSMW and direct input. I have only one file containing a "header" for the material general data, and "line items" to manage material taxes for other countries than the one defined for the current sales organization.
    I have created 2 nested structures as following:
    ZMATERIAL_ALL (parent structure)
              |__ ZMATERIAL_TAXES (child structure)
    In the structure fields, the first field is the header or line identifier:
    ZMATERIAL_ALL
              |__ HEADER -> With Identifying Field Content = H
              |__  ZMATERIAL_TAXES
                    |__ LINE -> With Identifying Field Content = L
    Header and line item have a common field MATNR and VKORG. ZMATERIAL_ALL contains data for sales org GI37, Japan. ZMATERIAL_TAXES contains data for France taxes (sales org GI10).
    The structure of my file is the following:
    H
    MATNR
    VKORG
    VTWEG
    SPART
    WERKS
    DWERK
    VERSG
    KTGRM
    MTPOS
    MTVFP
    LADGR
    J_3APIND
    VMSTA
    VMSTD
    DISMM
    DISPO
    DISLS
    FHORI
    MRPPP
    PLIFZ
    J_3AMSTATC
    TATYP1
    TAXKM1
    L
    MATNR
    VKORG
    ALAND1
    TATYP1
    TAXKM1
    ALAND2
    TATYP2
    TAXKM2
    In LSMW step 5, I associate ZMATERIAL_ALL structure tax values to BMMH1, because this taxe correspond to the tax for the current sales org defined in the current country:
    TATY1          Tax category (sales tax, federal sales tax,...)
                        Source:  ZMATERIAL_ALL-TATY1 (Tax category (sales tax, federal sales tax,
                        Rule :   Transfer (MOVE)
                        Code:    BMMH1-TATY1 = ZMATERIAL_ALL-TATY1.
    TAXM1         Tax classification material
                        Source:  ZMATERIAL_ALL-TAXM1 (Tax classification material)
                        Rule :   Transfer (MOVE)
                        Code:    BMMH1-TAXM1 = ZMATERIAL_ALL-TAXM1.
    Then in BMMH2, I associate tax values from ZMATERIAL_TAXES structure:
    __END_OF_RECORD__   After Using Conversion Rules
                        Rule :   Default Settings Modified
                        Code:    bmmh2-aland = zmaterial_TAXES-ALAND1.
                                 bmmh2-TATY1 = zmaterial_TAXES-TATYP1.
                                 bmmh2-TAXM1 = zmaterial_TAXES-TAXKM1.
                                 transfer_record.
                                 bmmh2-aland = zmaterial_TAXES-ALAND2.
                                 bmmh2-TATY2 = zmaterial_TAXES-TATYP2.
                                 bmmh2-TAXM2 = zmaterial_TAXES-TAXKM2.
                                 transfer_record.
    In LSMW step 7, I specify my single file with option "Data for multiple source structures".
    In step 8, I assign my file to both ZMATERIAL_ALL and ZMATERIAL_TAXES structures.
    In step 9 and 10, I can successfully read and display data. ZMATERIAL_ALL and ZMATERIAL_TAXES structures are well populated.
    The conversion is ok, then I run the RMDATIND program to perform the material creation.
    The result is "You have not fully maintained the tax classifications"
    Any idea what I am missing ?
    Thanks in advance for your help.
    Thibault

    The solution was to implement SAP Note 1730652, and it solved the issue !
    This was a standard SAP issue, and not an implementing issue.

  • LSMW Error - You have not fully maintained the descriptions

    Hi Experts,
    I was trying to Extend the materials to plant by using Direct input menthod where prog - RMDATIND.
    When I execute final step i.e "Start Direct Input Program" I faced with an error " You have not fully maintained the descriptions".
    I know this error with regards to Language Key and Description.
    I executed Display converted data under structure BMMH5, where Language key is blank.
    Kindly guide me why this language key is not captured, and also how to default the Language key as EN.
    Thanks nd Regards,
    Laxmi.........

    LSMW u2013 Legacy System Migration Workbench
    1.        Maintain object attributes
    2.        Maintain source structures
    3.        Maintain source fields
    4.        Maintain structure relations
    5.        Maintain field mapping and conversion rules
    6.        Maintain fixed values, translations, user-defined routines
    7.        Specify files
    8.        Assign files
    9.        Read data
    10.     Display read data
    11.     Convert data
    12.     Display converted data
    13.     Create batch input session
    14.     Run Batch Input session

  • Materail not fully maintained for this transaction/event

    Dear All,
    When i am extending material to new storage Location using MMSC i am getting below error msg.
    "materail not fully maintained for this transaction/event" wht may be the reason.
    regards
    venu gopal

    Hi
    Check whether material has plant level data ie:any views like MRP, purchasing .
    i suppose if material has only basic data 1 and 2 then u may get the below error.
    Chk and revert
    Reg
    Raja

  • You have not fully maintained the descriptions

    I am executing BAPI
    'BAPI_MATERIAL_SAVEDATA'
    I get the message :
    You have not fully maintained the descriptions

    Hi,
    Check the Material Descriptions whether maintained correctly or not...
    You also have to use BAPI_TRANSCATION_COMMIT after using that BAPI
    Check the below thread for the sample code.
    BAPI_MATERIAL_SAVEDATA
    Hope this would help you.
    Good luck
    Narin

  • The company code TEST does not exist or has not been fully maintained

    Dear Experts,
    I received the following message when I tried to create a material master from Plant Maintenance module (select view based on general plant data / storage 1).
    "The company code TEST does not exist or has not been fully maintained
    Message no. M3150
    Diagnosis
    You have entered either the company code TEST or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
    Procedure
    Ask your system administrator to configure the company code.
    Procedure for System Administration
    Carry out the following activities as required:
    Create the company code if it does not already exist.
    You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
    Make sure that a fiscal year variant is assigned to the company code.
    You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
    Configure the company code for materials management.
    You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.
    However, I've done all the above instructions, yet the message still appear.  what else should I check?
    regards,
    Abraham

    Hi,
    I've done that earlier..
    However, I've chosen the default plant 0001 instead of my own created plant, it works.  Then I tried to do it again, with my own plant, it works also..
    Anyway, thanks a lot.
    regards,
    Abraham

  • The company code OMPL does not exist or has not been fully maintained

    hi friends i did in obyc setting also fi posting are happens but the think is mm posting are not happen and not able work on transation code-mmo1i seen  transation code:omsy but company code is not mantain properly this is happen in mm module please give hints where to customization please help friends i am on client please
    ok
    The company code OMPL does not exist or has not been fully maintained
    Message no. M3150
    Diagnosis
    You have entered either the company code OMPL or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
    Procedure
    Ask your system administrator to configure the company code.
    Procedure for System Administration
    Carry out the following activities as required:
    u2022     Create the company code if it does not already exist.
    You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
    u2022     Make sure that a fiscal year variant is assigned to the company code.
    You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
    u2022     Configure the company code for materials management.
    You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.

    hi
    Try to maintain the settings in OMSY
    and check the posting periods for your company
    regards

  • "The company code does not exist or has not been fully maintained" in mm01

    Hi all,
    I am creating a material, it needs me to provide company code. when I gave out my company code, it reports:
    "The company code ZXXX does not exist or has not been fully maintained".
    what should the problem be?
    thanks and regards,
    Smaosn Zhu

    Hi Raja,
    Checked all you specified.
    I have done these assignments:
    1. assign comp - > comp code
    2. assign plant- > comp code
    3. assign purch. org - > comp code
    4. assign purch. org - > plant
    but the problem is still there.
    let me try to re-do it.
    thanks,
    samson

  • Error : COmpany code does not exist or has not been fully maintained

    Hi ,
    I tried creating a material with industry sector : mechanical , material type : raw material.
    i selected basic data 1 and 2 view or MRP 1 view for views , i gave plant as SUJA and storage location value S001 ( plant and stor loc i have created in the company code 2001)
    but i get this error COmpany code 2001 does not exist or has not been fully maintained..
    I created COMPANY CODE using SPRO - Entreprise structure --definition -  financial accounting --define , copy , check , delete company code..
    kindly suggest me the solution for this error..

    Hi,
    Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
    Please activate in T.code: OMSY,
    [For example: For Fiscal year variant K4]
    In OMSY steps, u have to enteru2026u2026u2026..
    Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
    Company Name..
    Fiscal Year of Current Period 2009
    Current period (posting period) 03( )
    Fiscal year of previous period 2008( will come automatic)
    Month of previous period 02( will come automatic)
    Fiscal year of last period of previous year 2008
    Last month of previous year 12
    Allow Posting to Previous Period (Back posting)
    Disallow back posting after a change of period
    Now create material with T.code; MM01
    Regards,
    Biju K

  • Item category determination customizing not maintained error in CRM_IC

    Hello Solution Manager Gurus
          I have configured IC Web Client.. But in service ticket tab i am getting Item category  customizing not maintained error. Similarly i dont know where to create SLA information for service ticket in solman system.
    Please help me
    regards
    Naveen

    Sure Naveen
    I think you have my email id with you
    And for the customization guide of Webclient, it is available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    C78: CRM Interaction Center (WebClient)
    Hope this will help
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Customer not maintained in sales area

    when i create sales order system is throwing a error message
    like
    customer not maintained in sales area....
    in va01, after entering sold to party i am getting this error....
    what should be configuration setting for setting this right.... kindly advise

    Hello,
    As told by Venkat, you are required to maintain the Sales Area data.
    By seeing the error there is something that you are missing in Configuration.
    Go to XD02 and extend your customer. You only must have created two segments. Extend the customer to sales are segment.
    Thanks,
    Ravi

  • Pricing/euro: Attention: Euro Customizing not maintained

    Hi All,
    While creating Sales Order for EURO customer, it is giving following error :
    Pricing/euro: Attention: Euro Customizing not maintained.
    I have maintained EURO exchange rate in OB08 Transaction.
    What could be the problem, give us immediate solution.
    Yusuf

    Hi Yusuf,
    From the error its clear that its a problem of Pricing/Euro and euro customization,drill down the error and check the analysis fo theis error,if its there.
    If not,check the customer master setting,as what is the customer pricing pro.
    and also check the doc.pricing pro.
    hope this helps to some extent.
    SriRam

Maybe you are looking for