BPE in RWB is showing Red LED.

Hello Experts,
In RWB --> Component Monitoring --> Display -- Business process engine is showing RED LED.The message
"Schedule background job for clearing report" is in Yellow.
In transaction swf_xi_customizing all the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
I cannot change the "Schedule background job for clearing report". It gives message "Customizing Already Carried Out"
Please help.
Thanks in advance,
Regards,
Suraj

Hi Suraj,
Is this hindering the execution of your BPM. I dont think it should create any problems. I have often seen the adapter engine and integration engine showing Red LED but that does not hinder the execution of messages.
Regards,
Sarvesh

Similar Messages

Business Process Engine is showing Red Led in RWB

Hello to All, I installed PI7.1 and after client copy - Business Process Engine is showing Red Led in RWB.
When I click on BPE, the message at bottom of screen (in Yellow Status) indicates " Schedule background job for clearing report". Please let me know if any one has the solution with details.
I gone thru the link in SDN, but no resolution yet.
Re: Business Process Engine is showing Red Led in RWB
thanks, Srini

Hi Mark, All the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
In RWB, component monitoring --> Display -- Business process engine is RED with message as
"Schedule background job for clearing report" in Yellow.
I looked under batch jobs "SWWCLEAR" and it is already ran successfully.
Please let me know how can i make BPE green.
thanks, Srini
Edited by: Srinivas Chatrati on Apr 20, 2009 11:51 PM

FILE TO IDOC SCENARIO-Receiver Business system ECC showing Red

HI
     In File-idoc scenario Business system showing red status in RWB .And i have given the role for the business system as application server and configure related integrated server . But the error in a RWB for the ping and self-test is as follows
     Unable to log on to system buss_ecc_200 in language en with user PIRWBUSER .
I thing from XI side every thing is ok. But for bussiness system side ECC might miss some configuration .
       could any help in this issue:
regards..

Hi
Please try one of the followings:
1) In Configuration --> Business service --> Service --> Adapter specific identifiers. Give logical system name for the sender system (e.g XI_00_800)
2) In Design --> mapping objects. Give all information of sender n receiver in EDIDC40 segment and
   In configuration --> receiver communication channel in that enable the checkbox take sender from payload.
3) In configuration --> Receiver Agreement --> Header mapping --> Sender Service (Give XI1 i.e ur sender system).
Also check the RFC destination that is the major problem with idoc...

Shuffle light shows red when it should show green.

Shuffle light shows red when it should show green. For example, when it's fully charged, the light shows red instead of showing green. When you play a song, the light blink in red too.

Are you sure the 2nd gen shuffle you have is a REAL Apple shuffle and NOT a
FAKE?
LED colors and functions are an indication it a FAKE...

My bb curve 9380 shutdown and a red led lighting

my bb curve 9380 shutdown and a red led lighting i don't now what hapned but i just modify some apps bay bb desktop softwere please help me and thx verry much

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
If the problem is revealed via the above tests to be your BB, then I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sup 720 unlabelled Red LED

I have a pair of 6513s with a pair of Supervisors in each and on one of the standby (Sup 720) front panel is a RED LED. This LED has no label and is just to the left of the Console port. I have checked reference documents and this LED is not mentioned? Any idea? Thanks

Hi
I feel the sup mite have got stuck up in rommon prompt and requires manual boot command to boot it up..
once it gets booted up check out the valid ios file in the disk0 or disk1 and configure the boot system command accordingly.
once you are thru with that save the config and check with show bootvar to verify whether the changes got replicated or not..
regds

My Xperia Z3 Dual only has a constant red led when plugged in, cant turn it On

Hi,
When I woke up in the morning today, I noticed that my Xperia Z3 Dual only shows the led in red (constant, not blinking) when I plug in to charge. I cant power on pressing the Power button, cant even restart using Power + Volume buttons. I also tried the recovery procedure from PC Companion, power off then Volume and power on, connect to PC and autodetect... nothing works.
I have the phone since march 2015, only 3 months; all was perfect before this big issue: no software problems, battery duration was excellent (at least 1 full day), camera ok, both sim's detected and configured without issues, also no problems when wet my phonet.
Can you help me pls?

@JesusAlarcon
That could be a hardware issue, contact your local Xperia Care ASAP
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Red LED affect thinkpad yoga display

I receive my Thinkpad yoga last February 2014, just a few week I notify something on my display at right corner on the up side (laptop mode), when the display show dark color (blue, green, etc), it just like normal. when displaying the bright color(such white) the right corner display show like a cream color. behind the area is the logo thinkpad with red LED.
is this the effect?is this normal? any idea to turn off the red LED in the Thinkpads logo at the screen cover??
I am pretty bother with this.
Thanks and regards.

You can try to install this color profile.
At the end of the page:
https://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Thinkpad-Yoga-ghosting-after-image-watermark-iss...
Hm, that's too complicated. You can download the profile from here: http://1drv.ms/1tnXjFp

Blackberry 9900 bricked with red LED flashing

My cell phone Blackberry 9900 was bricked last night. No special usage or status before. Now it can't be turned on any more, just the LED flashing. I have tried many ways to re-turn it on, not work. It even can't connect to computer. the computer is able to find it just when the red LED is lighting!
What happened on my phone? What can I do next? I must turn it on!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pearl Flip wont load - Red LED blinks twice, nothing on screen

My Pearl Flip refuses to load, and the only activity it shows is the red LED blinking twice every few seconds. I have tried the following
-tried reinstalling the two most recent versions of the OS using the Blackberry Desktop Software, but the installation hangs at the point of loading the system software
-tried using the application loader, however the installation hangs at loading the system software
-tried to use JL_Cmdr to wipe the device. As far as I can tell it did not wipe it (although it doesn't really provide any errors either)
EDIT: Should also say Ive tried all the above from multiple computers and using Win7 and XP
What other methods can I try to restore this device? I appreciate any suggestions that might be out there.
Thanks!
Scribs

Hey Scribs,
Welcome to the forums!
Have a look at this article for help reloading the software using loader.exe http://bbry.lv/9fsGPK If this method does not work you can try doing a reset to factory using the switch found in this article http://bbry.lv/dpNb1j
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Blackberry Curve 9310 Battery shows Red X with JM1 9900/9930 = 1230mah

Blackberry Curve 9310 Battery shows Red X with JM1 9900/9930 = 1230mah Is it possible to get the new JM1 battery to work with the Blackberry curve 9310 the original battery was JS1 9200/9230 = 1450mah the site I ordered stated they were identical but the device shows not connected properly with the JM!. I'm told there may be a update to remove the notfication that I can install? Thank you

I GOT A SOLUTION!
Ok, so this has been happening to me a lot with my 9790, and it sure is a pain in the ***...
I got my battery with my phone when I purchased it from the phone company, if you did too the battery is most likely legit.
So the 2 ways that worked for me are:
1) Plug the charger into the device and turn it on so the Red X appears again
2) Plug the device out, then take the battery out and hold it in your hands for 1-2 mins (that's what I did)
3) Put the battery back into the device and plug the charger back into the device, BUT DO NOT turn the device back on
I plugged the changer into my device without turning it on, and the LED turned on with a black screen, you wait 1-3mins and the screen will appear with a lightening bolt through a battery.
This means it's now charging, once that happened I still didn't turn it on. It'll go to the Blackberry loading screen on it's own. TA-DAH!!
If that doesn't work, here's the second way, but it's a pain in the ***...
Hopefully you Backed Up your phone recently..because what you're going to have to do is reinstall your phone, I can't remember the steps correctly but it's pretty simple
What you want to do is connect your BlackBerry to your desktop or laptop, and open up the BB Desktop Manager. From there your BlackBerry won't be detected. Then you have to update it and click on look for updates or whatever it says, then do that and even though you already have that version just click ok to update it. From there it'll update and reinstall everything. By the time it's done you're phone should be wiped except for the things you have saved on your little memory card. Next just restore everything you had backed up from the desktop manager.
Hope one of those steps helped ya!

Memory Dimm1 Red LED

hi, i have a mac pro quad 2009, today i found out that the RED LED lights on dimm slot 1 on the processor tray. and sys. profiler shows that the slot is not populated as 3 x 1GB of the ram is apple shipped stock ram. and i tried to swap the ram at the 1st slot to one another it still remain the same problem. What else i can do other than send to Apple service center?

There is another post on these forums about a red LED. The answer was that it indicated an improperly seated module. A vacant slot should not give such a warning (proviso). As delivered my device had several unpopulated slots. The problem you have may be that slot 1 specifically has no RAM. I suggest you buy another 1GB of RAM and install a total of four modules. put them in slots A1 and A2, and in B1 and B2.
As long as all the modules are of the same technical specification and that is the correct spec for your machine, then they should work.
Best advice is to use two pairs of same make but different makers will work provided they are same spec etc. If you have different makes put same makes together in any pair.
The other thing to be sure of is the seating per se. That seems to be a slot A1(?) issue in your case so you could test it by switching known good modules between the slots to test the slots. Remember to get the thing to work you should have a functioning configuration of modules.

Cpu or mobo broken? (four red leds and CD ticking on 865PE)

Hi folks, hope you can help me out.
My 2.5 year old system died today while using it. It's an 865PE Neo2 with a 2.8GHz P4 and 2x512MB RAM.
It doesn't POST and the D-bracket is showing four (all) red LEDs. What is also interesting is that there is some kind of activity on the CD/DVD drive (is ticking continuosly) and the keyboard Num Lock / Caps Lock / Scroll Lock LEDs blink at irregular intervals (all at the same time).
Does this indicate if it is the CPU or motherboard that is broken?
[I have disconnected all accessories + reseated the two power connectors, the memory sticks and CPU but no improvement.]
Cheers
Mike

I bought the computer "ready-made" by a computer manufacturer so I haven't been involved in the choice of PSU, but I expect the specs to be sufficient as they built lots of systems of this model. The computer is a "low noise" model (PSU labelled "w/noise killer") so this has probably affected their choice.
Anyway, the specs are:
DC out: 350W
3.3V+5V: 220W max
3.3V: 28A
5V: 30A
-5V: 0.3A
5V SB: 2A
12V: 16A
-12V: 0.8A
I thought my measured voltages looked fine, but was there something that caught your attention and indicated problems with the PSU? (Or maybe rather the failure statistics you mentioned earlier?)
Thanks
Mike

Q10 wont turn on. Red LED 1101111 blinking.

Hi All,
Just updated my Q10 to 10.3 via the carrier update and after half a day my phone turned off and now it wont turn back on again.
When I press the power button the yellow LED comes on and after that the red LED blinks in the following sequence 1101111.
Tried all the usual tricks. Battery pull, plugged phone in without battery, plugged into blackberry link, used original charger/cable, hold power button down for 10 seconds etc...All don't work.
Any ideas would be much appriciated

Hi and Welcome to the Community!
I cannot quite tell if you have done exactly this or not...apologies in advance if you have. Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
It is also possible that the OS update caused this. Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I wake up, I have email, but no flashing red LED!

Last night, I plugged the charger into my 8900, saw the clock displayed, and went to sleep. When I woke up this morning, I had 4 new emails and 2 text messages, but the LED was still blinking green, not red. Had I not looked at the 8900's screen, I would not have know there were messages waiting for me.
I searched the forums on this issue, and came across one post which said exiting the bedside mode by bypassing the clock application's "Exit Bedside Mode" option can cause this.
All I can think of, is that I might have set it to Bedside Mode (which turns off the LED) and then pressed the MUTE button to put it in standby. I remember seeing the message dialog box show up saying the phone was entering standby mode, but the message never went away. I cleared the dialog box by pressing the red End Call button. I think the phone may also have exited Bedside Mode at that time, or I may have manually exited it via the clock's option. My guess is that this is what caused the LED not to flash red after receiving messages. Unfortunately, I've been unable to replicate the error using this method, or any combination thereof.
Any ideas?

The blinking red LED blinks ONLY for about 15 minutes after receipt of a message or email. Unless you had received the email and SMS in the 15 minutes prior to your waking, there is no reason your LED should have been blinking.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BPE in RWB is showing Red LED.

Similar Messages

Maybe you are looking for