BPEL doesn't insert Date into BAM dataobjects

I have integrated BPEL process to send data into BAM data objects. I can insert data into BAM successfully when I don't map "PO Creation date" (one of the field of payload--variableData--data) but it doesn't insert data when I map PO creation date.
I am getting PO creation date in format "20080405 103354". I tried to use Date format but I got no success.
It takes Timestamp field under actionData-->header successfully without formating it.
So what I have to do to enter this date?

Priyasagi wrote:
Hi,
Use to_date function to convert the charactor input as,
INSERT INTO L_EMPLOYEES VALUES (201, 'SUSAN', 'BROWN', 'EXE',CV, 30, '3484', NULL);
Hope it will help.
Your usage of to_date -- without supplying a specific format mask -- is still relying on NLS_DATE_FORMAT settings, just as the OP's original was with its implicit conversion. It's rather pointless to use to_date without a format mask.
The only difference between
insert .... to_date('12-Jun-1996')
and simply
insert .... '12-Jun-1996'
is that in the first you are explicitly telling oracle to do what it would implicitly do in the second. Either way, it is relying on the NLS_DATE_FOMAT that is in effect.

Similar Messages

Insert data into multiple entities at once using a view object

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)?

Hi,
I'm trying to insert data into multiple entities at once using a view object, but unfortunately it doesn't seem to work. The two entities have a 1:1 association. I created a view object which contains both entities and I made sure they aren't read-only. But like I said it doesn't work, I can't insert data in both entities at once... :(
Is this possible? And how (if it is)? Peter:
This is definitely supported and tested. Please send us the exception stack trace. You must running into other problems. A few things to note:
A) You have to mark the entities as both updateable (not read-only) and not reference-only.
B) If you're not seeing an exception stack, turn on diagnostic. Here is how:
To turn on diagnostic, go to the IDE,
1. Select the project.
2. Do right mouse click and select "Project Settings..."
3. On the Settings dialog, select Configurations/Runner.
4. In the righthand side pane, you should see a textbox for "Java
Options". Please add the following JVM switch:
-Djbo.debugoutput=console
Then, rerun. The run command should include
-Djbo.debugoutput=console as in
"D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
You should now see a lot more output on the IDE's message window. Here you should see the exception stack trace.
If you invoking your app directly from command prompt, just add "-Djbo.debugoutput=console" after your "java.exe".
Thanks.
Sung

Inserting data into a column from 2 different tables

Hi,
I need to insert data into a table using 2 other tables. The tables that contain data have identical column names.
Is using a UNION statement the only option?
Also, if I need to insert data into columns from only one of the either tables, how do i do it?
Thanks.

For future reference, "doesn't seem to work" is a rather generic description... Posting the particular error message will be quite helpful, though I'm reasonably confident that I know the particular problem here.
First, if only for sanity, you probably want to explicitly list the columns of the destination table in your INSERT statement.
Second, it doesn't make sense to have DISTINCT clauses in queries that are UNION-ed together. A UNION has to do a sort to remove duplicates already.
Third, the two queries you are UNIONing together have to return the same number of columns, with the same names, in the same order.
You probably want something like
INSERT INTO new_table( col1, col2, col3, col4, col5 )
SELECT 'ABC' col1,
         a.colA col2,
         a.colB col3,
         a.colC col4
         a.colD col5
    FROM table1 a
UNION
SELECT 'ABC' col1,
         b.colA col2,
         b.colB col3,
         b.colC col4
         NULL   col5
    FROM table2 bJustin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Cannot insert date into numbers 3.1 using ctl shift d

can no longer insert date into numbers 3.1 using control shift d

Hi Gerald,
If you are inserting the current date a lot, and want a simple keyboard combination to do it rather than fiddling with formulas in Numbers, here is an easy way that takes advantage of some neat functionality built into every Mac that is much easier than it sounds. It requires the investment of just a few minutes of time to make a one-time setup of an "Automator service." Thereafter inserting a date is just a menu pick or keyboard combination.
1. Open Automator (in your applications folder) and choose Service as document type:
2. Drag 'Run AppleScript' action from the left over into the right pane:
3. Copy the following script and paste it into the right pane (replacing all of the default text in the pane):
on run
          set date_ to ((current date) as string)
set the clipboard to the date_
          tell application "Numbers"
activate
                    tell application "System Events"
keystroke "v" using {option down, shift down, command down}
                    end tell
          end tell
end run
4. At the top of the right pane choose 'no input' for 'Service receives' and 'Numbers.app' for 'in'. (On my machine I have the old Numbers renamed to Numbers09 so the script doesn't get confused).
After you click the hammer icon (to "compile") your right panel should now look like this:
5. Name the service "Today" or similar and move it to the Library > Services folder. (If it doesn't save automatically to that location you can File > Export in Automator, choose the 'Desktop' for 'Where', then in Finder open a new window and hold down the option key and choose Go > Library > Services, and drag Today.workflow from the Desktop into that folder.)
That's it. The service is ready to go. Thereafter, whenever you want to insert the current date, just pick Today from the Services menu:
6. Or, to make this even easier to access, choose Services Preferences and assign a keyboard shortcut to the service:
SG
Troubleshooting notes:
This should "just work." But if it doesn't for some reason, try one or more of the following:
- Rename the old Numbers (the one in the iWork '09 folder under Applications) to Numbers09 or similar.
- Check to make sure you aren't using the same keyboard shortcut for something else.
- Remove 'Day of the week' from your "Full" date format in System Preferences > Language & Region.
- Try revising permissions under System Preferences > Security & Privacy > Accessibility > Privacy.

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

How do you access a web service to insert data into table?

Ok I have a simple html/jsp survey form to host on our web site. Because of firewall issues I cannot do a direct connect to the database and insert the data from the form. So I need to take the data from the survey form, and pass it to an existing web service, or create a web service that will insert this information for me into the database table?
Thanks again.
orozco

Thanks for the reply shanu. Well, because of firewall issues, as a work around we use a web service to insert data into the database table. Since the Web Service already exist, we just thought it would be easy enough just to pass the parameters to it, and have it do the insert. So really all I need is just to communicate with the already existing web service. I will be honest though I have not really worked with web services before.
orozcom

How to insert data into datagrid dynamically and also programatically with data and column names being retrived from a xml file..

iam not able to insert data into datagrid corresponding to the column names..as iam inserting both data and column names programatically..ie iam not able to co relate the data with the column names.plzzz help me asap

A DataGrid is row-based rather than cell-based with each row
corresponding to an item in an underlying collection (specified in the
dataProvider property). In order to add data to a DataGrid you
manipulate the underlying collection, rather than the grid directly.
Based on the limited description of your problem I would imagine you
would need to create dynamic objects with property names that correspond
to the dataFields of your dynamically created datagrid columns.
So if you had created columns with dataFields "alpha", "beta" and
"gamma" on your datagrid, you could create an item in your grid by
adding the following object to your dataProvider:
var gridItem : Object = new Object();
gridItem.alpha = "alphaValue";
gridItem.beta = "betaValue";
gridItem.gamma = "gammaValue";

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

How can I insert data into the standard CRM tables ?

Hi Experts,
Scenario----
I need to download few attributes (fields) from SAP MDM to SAP CRM via SAP XI. I'm using the 'COMT_PRODUCT_MAINTAIN_API' API for it.
The attributes(fields) that are present in the strucutres of API are downloaded into CRM system (by executing the Inbound proxy that is created based on the Message Interface created on XI) by calling the functions present in the API.
And for those fields that are not present in CRM, but need to be downloaded into CRM, I'm creating the Set Type attributes in CRM, which get appended to the API.
My query is:
There are fields in CRM into which I need to insert the values. But they are not listed in the API. So, how can I insert(/download) the values into these standard fields?
Regret the long description. Intended to be clear.
TIA. Points will be awarded.
Regards,
Kris
Edited by: Kris on Jul 21, 2008 8:00 AM

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

How can i insert data into DB from my page programatically in Oracle ADF..?

Hai, this is praveen.
I have created an EO and VO, when i have inserted data by dragging and dropping from DataControl -->Operations-->Create. I have successfully inserting data. But how can i do it programatically. What are the pre-defined steps that i can use over there to insert data into table programatically. Could u plz help me?

Hi,
You have to create an action Listener in the bean for any button.
Then call an AM method.
In that you have to do the following
ViewObject yourVO = getYourVO();
Row r = yourVo.createRow();
r.setAttribute("Column1", value1); //the name of column should be as it is in your vo attribute.
yourVO.insertRow(r);
this.getDbTransaction().commit();
Thanks

How can I Insert data into my msaccess Database table

Hello all,
I am new to Java programming and I have problem that how can i insert name into my database table.
The code which i have written is following:
String filename = "d:/test.mdb";
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database+= filename.trim() + ";DriverID=22;READONLY=true}";
Connection con = DriverManager.getConnection(database,"","");
String s = String.valueOf(text.getText());
int k =10;
Statement st = con.createStatement();
st.execute("create table Test123(name text)");
st.execute("INSERT INTO Test123 values" +s);
on the INSERT program throws exception???
can any one help me how to insert data into tabel.
Thanks

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

Is there a way to Insert Data into a Lookup Column Type on a SharePoint List Destination in SSIS?

Greetings.
I have successfully worked out inserting SQL data (2008 R2) into my 2010 SharePoint list (New, Update, Delete) by creating an SSIS Data Flow Task as outlined here:
http://fsugeiger.blogspot.com/2010/01/synchronise-sql-table-with-sharepoint.html
However, the problem I am running into is inserting data into the SharePoint Columns that are "Lookup" column types. I verified that all of the values I am copying from SQL into the SharePoint lookup column exist in the customn list it is pointing to. It
is important to have this column be a lookup column as it links to another custom list that has many more columns of related information.
I have read and re-read the SharePoint SSIS Adapters 2011.docx from
http://sqlsrvintegrationsrv.codeplex.com/ and the only section that seems to apply is this:
"Looking Up Values in a SharePoint List
If you have to look up a value in a SharePoint list, you can use the Lookup transformation in your data flow, and use the SharePoint List source to load the lookup table. You may have to add a Derived Column transformation or a Script component that splits
data in the lookup column on the ";#" delimiter to separate the ID value from the description.
If you are replacing values in your data with the values that you look up in the list, then loading the changed data back into SharePoint, you only have to include the ID from the lookup column. SharePoint ignores the description if you include it."
I am not sure if the above statement means that I should be passing the assocaited ID's other than the actual data into the SharePoint List destination. If that is the case, that will not really work as the lookup contains hundreds of rows. Not too mention
I have several of these lookup column types pointing to several different lists.
Any guidance in how I can put data into a SharePoint Lookup column type via Data Flow Task would be so much appreaciated.
Thank you.
My errors are:
Error: 0x0 at Data Flow Task, SharePoint List Destination: Error on row ID="1": 0x1 - Unspecified error, such as too many items being updated at once (batch), or an invalid core field value.
Error: 0xC0047062 at Data Flow Task, SharePoint List Destination [1903]: Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.PipelineProcessException: Errors detected in this component - see SSIS Errors at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListDestination.ProcessInput(Int32
inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SharePoint List Destination" (1903) failed with error code 0x80131500 while processing input "Component Input" (1912). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will

I have found a solution to my problem and thought I would share it here in case there are others who are struggling with the above scenario. If you have a better way, I would love to hear about it since my way is a bit tedious.
In a nutshell, in order to have an SSIS package put data from an OLE DB Source into a SharePoint List Destination Lookup Column, you need to pass the ID of the value that is being looked up, not the value that is in the “master” OLE DB source.
Rough explanation, OLE DB Source value for column “Approp” is “4005” --> SQL matches “4005” with the ID in the new lookup table (“4005” = ID “5” as defined in the SharePoint lookup list) --> “5” gets passed into SharePoint List destination lookup
column --> SharePoint displays “4005” and successfully links to the lookup list.
Funny thing (not really), the error(s) outlined in my original post are not related in getting data into a SharePoint Lookup column as I am now successful in getting data into the system but I am still getting the same above error(s). I think it has to do
with the ID column in the SharePoint list destination. What I can’t seem to figure out is why since I am not linking any data to that ID column (at least on new records). I am however linking it on Update and Delete and the errors mentioned above disappear
and things work well.
There are three tasks that need to get done in order to get data from SQL into a SharePoint lookup column assuming you have already set up your SharePoint lookup lists:
1. Create new lookup table(s) in SQL that has the IDs from the SharePoint Lookup list and the values coming from the “master” OLD DB Source. You can see the ID column in SharePoint by toggling it on in a view.
2. Create a SQL command that JOINs all the databases and tables so that the ID is passed and not the value into the SharePoint lookup column
3. Change the “Data access mode” to “SQL Command” instead of the “Table or view” in the OLE DB Source and paste your command into the “SQL command text:” area.
Other helpful info is that you may also need to add additional columns in the new lookup tables in SQL for the scenarios when the data is not unique. You can see this two times in my SQL command example for Units and JobTitles:
SELECT
pps.SSNm,
pps.file_updated,
pps.Employee_id,
/* pps.CheckDistNm,*/
Check_Distribution_id = COALESCE( d.ID, 0 ),
pps.Job_nbr,
pps.SeqNm,
pps.action_eff_dt,
Fund_id = COALESCE( f.id, 0 ),
Appropriation_id = COALESCE( ap.id, 0 ),
ActionCode_id = COALESCE( ac.id, 0 ),
SpecNumber_id = COALESCE( jt.ID, 0 ),
pps.Employee_id,
/* pps.Fund,
pps.Approp,
pps.Unit,*/
Unit_id = COALESCE( u.ID, 0 ),
PosNm,
PosCode,
pps.LastName,
pps.FirstName,
pps.MI
FROM
x_PPS.aReportVw.pps_screens_active AS pps
LEFT OUTER JOIN dbo.DistributionNumbers AS d ON
pps.CheckDistNm = d.Check_Distribution
LEFT OUTER JOIN dbo.Units AS u ON
pps.Fund = u.Fund AND
pps.Approp = u.Approp AND
pps.Unit = u.Unit
LEFT OUTER JOIN dbo.Appropriations AS ap ON
pps.Approp = ap.Approp
LEFT OUTER JOIN dbo.Funds AS f ON
pps.Fund = f.Fund
LEFT OUTER JOIN dbo.ActionCodes AS ac ON
pps.ActionCode = ac.ActionCode
LEFT OUTER JOIN dbo.JobTitles AS jt ON
pps.SpecNm = jt.SpecNumber AND
pps.JurisClass = jt.JurisClass

Use Spry to insert data into a database?

I'm new to Spry, so I have a question:
Can I use Spry to insert data into a MySQL database without
reloading the site?
Reading data from XML file works fine, but I don't know if
writing is possible..

I don't get it... I tried this:
<script type="text/javascript" src="spry/xpath.js"
/></script>
<script type="text/javascript" src="spry/SpryData.js"
/></script>
<script type="text/javascript">
/* <![CDATA[ */
function subscribe() {
var subscribe;
var info =
document.getElementById("subscription_info").value;
if (document.getElementsByName("subscription")[0].checked ==
true) {
subscribe = "ja";
else {
subscribe = "nein";
var dsSubscribe = new
Spry.Data.XMLDataSet("include/inc_subscribe.php?subscribe="+subscribe+"&info="+info+"&sit e=<?=$_GET['site'];?>",
"subscription/ok");
/* ]]> */
</script>
<div id="infos">
<input type="radio" name="subscription" value="ja" />
dabei
<input type="radio" name="subscription" value="nein"
/> nicht dabei
<input type='text' class='text'
id='subscription_info_text' />
<input type='submit' id="subscription_submit"
value='Eintragen' onClick="subscribe()" />
</div>
But the data isn't inserted into the mysql database. When I
start the php script directly, it works, so I think it's not a php
problem.

Insert data into table

When I try to insert data into the table, I get the error message:
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]The name 'uniqueID' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.
What is wrong in the following code?
String uniqueID, GenericType;
float elevation, CalcTotalHeight, CalcTotalArea, CalcTotalVolume;
stmt.executeUpdate(
"INSERT INTO IFCData VALUES (uniqueID, GenericType, elevation, CalcTotalHeight, CalcTotalArea, CalcTotalVolume)" );

No, sorry, now that I look at it for more than five seconds, your SQL is wrong.
You don't have a list of columns that you are updating; I'm not sure whether this is bad SQL or whether the database will assume you meant to update all the columns in their declared order. But more to the point, the "values" you are assigning to those columns are not what you want. For example, the value you assign to the first column is uniqueid, meaning either the column named uniqueid or some SQL constant named uniqueid. There isn't any such thing, hence the message.
I suppose you wanted to put the value of the Java variable "uniqueid" there. Of course the database and the JDBC driver don't know anything about the names of variables in your code, so they can't replace the string "uniqueid" by the value of the variable. The way to do that is to use a prepared statement, like this:PreparedStatement ps = conn.prepareStatement("INSERT INTO IFCData VALUES (?, ?, ?, ?, ?, ?)");
// fix this SQL so you name the columns you are inserting into as well
ps.setString(1, uniqueID);
ps.setString(2, GenericType);
ps.setFloat(3, elevation);
// and so on
ps.executeUpdate();PC²

BPEL doesn't insert Date into BAM dataobjects

Similar Messages

Maybe you are looking for