BPEL - FTP to AS400 machine

Hi,
Has any one tried to FTP a file (put or get) to/from an AS400 machine? Are there any special tricks/tips to do that either on BPEL end or AS400 end?
We are seriously stuck now and lagging in the timelines of the project. Please advice.
Thanks,
Sanjay

Hmm, must confes I didn't do that yet... However did you try to FTP from the OSB server to the AS/400, does that work? And if not what are the errors you are getting?
hth

Similar Messages

OSB 11 - FTP to AS400 machine

Hi,
Has any one tried to FTP a file (put or get) to/from an AS400 machine? Are there any special tricks/tips to do that either on OSB end or AS400 end?
We are seriously stuck now and lagging in the timelines of the project. Please advice.
Thanks,
Sanjay

Hmm, must confes I didn't do that yet... However did you try to FTP from the OSB server to the AS/400, does that work? And if not what are the errors you are getting?
hth

BPEL FTP Adapter name space

Hi Friends,
I have a bpel process which sends xml data over ftp. The name space in FTPed data looks as below:
"<?xml version = "1.0" encoding = "UTF-8" ?>
_+<Metadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://aiv-external.s3.org.com/UnboxMetadata.xsd" xmlns:tns="http://www.org.com/UnboxMetadata/v1" xmlns="http://www.org.com/UnboxMetadata/v1">+_
<tns:Movie><tns:PartnerName>ABC</tns:PartnerName><tns:UniqueID>1263456</tns:UniqueID>
</tns:Movie>"
However receive of ftpied data expect following (Please note change in sehmalocation:
" <?xml version = "1.0" encoding = "UTF-8" ?>
_+<Metadata xsi:schemaLocation="http://www.amazon.com/UnboxMetadata/v1 http://aiv-external.s3.amazonaws.com/UnboxMetadata.xsd"+_
_+xmlns="http://www.amazon.com/UnboxMetadata/v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">+_
<Movie><PartnerName>ABC</PartnerName><UniqueID>1263456</UniqueID>
</Movie>"
Is i t possible to control/change schema location and get file in expected form?
Thanks,
Sachin.
Edited by: user10051771 on May 1, 2013 2:31 PM

Thanks Everybody for the prompt response .
1) What error does one get when trying to connect to FTP Sever which only support active mode
No Error , but no file transfer happens. SR and Bug Request for the same is already in place .
QUESTION
========
Does BPEL FTP Adapter supports active ftp mode (instead of passive).
ANSWER
======
No, FTP Adapter only supports passive mode. For that purpose there is an Enhancement Request
already, the Bug 6866124 - NEED SUPPORT FOR PASSIVE FTP ADAPTER AND CUSTOM FTP
COMMANDS :
1. The FTP Server needs to be active for the Adapter to work. So, both FTP Server and the FTP adapter must be active for it to work.
Also you only support PASSIVE mode in our FTP JCA adapter. ACTIVE mode is currently
considered bad practice and a security vulnerability.
But, we would require both ACTIVE and PASSIVE modes.
2. Custom commands are not supported. But, we need the samples for custom FTP Commands and support for it.
for example: quote site fixrecfm 90...

BPEL FTP Adapter Active Mode

Does BPEL FTP Adapter supports active ftp mode (instead of passive). Apparently the ftp site for one of the Interfaces uses FTP Adapter and that ftp server it is using supports ONLY active ftp sessions, NOT passive.
Want are configuration to made to changed to support active mode
oc4j-ra.xml for ACTIVE ftp and not passive

Thanks Everybody for the prompt response .
1) What error does one get when trying to connect to FTP Sever which only support active mode
No Error , but no file transfer happens. SR and Bug Request for the same is already in place .
QUESTION
========
Does BPEL FTP Adapter supports active ftp mode (instead of passive).
ANSWER
======
No, FTP Adapter only supports passive mode. For that purpose there is an Enhancement Request
already, the Bug 6866124 - NEED SUPPORT FOR PASSIVE FTP ADAPTER AND CUSTOM FTP
COMMANDS :
1. The FTP Server needs to be active for the Adapter to work. So, both FTP Server and the FTP adapter must be active for it to work.
Also you only support PASSIVE mode in our FTP JCA adapter. ACTIVE mode is currently
considered bad practice and a security vulnerability.
But, we would require both ACTIVE and PASSIVE modes.
2. Custom commands are not supported. But, we need the samples for custom FTP Commands and support for it.
for example: quote site fixrecfm 90...

BPEL FTP Adapter - tutorial/sample?

Hi,
Is there a sample or tutorial available for the BPEL FTP Adapter for v10.1.2.0? Please let me know.
Thanks
N

Yes, there's an end-to-end tutorial that ships with 10.1.2 and can be found in samples\tutorials\129.FTPAdapter.
HTH,
Navneet

BPEL FTP poller issue

Hi All,
BPEL 10.1.3.4 - 2 Nodes
I have a BPEL FTP poller which polls and initiates new process.
Since we have two nodes, its creating two instances very time we drop the file.
How do I prevent the duplication or make the poller work in only one node?
Thanks,
Ravi

Hi Ravi,
You have to make adapter singleton to prevent this race condition.
Have a look at this link
http://soa-bpel-esb.blogspot.com/2010/01/how-to-set-up-singleton-adapter-in.html

Developing java interface for as400 machines

I tried to write a simple java application to retrieve the data from as400 machines,and I found there are some predefined packages available in Net as freeware. The package named as COM.ibm.db2.jdbc.net.*. but, I could not find the location of this free software. If any one identify these location please
Let me know.
Thanks in advance.
selvin

Hmmmm....
Have you tried going to www.ibm.com and searching for COM.ibm.db2.jdbc.net?

BPEL FTP Adapter Error : Error ModificationTimeFormat

Hi ,
I have a requiremnt to copy a file from FTP server and put that file into my Local Machine .
For that I have created a BPEL Process .
One Partner Link ( FTP ) - There is a option to "delete the file " . I dont want this option , Because I want to copy the file from FTP server to Local Machine not to move the file .
If I check this " Delete the File " option , instance is sucessfully created and files get moved from FTP server to Local Machine .
My Question is : I want to "copy" the file from FTP Server to Local Machine , so I deselected the option " Delete the file " . After that I set Time Modification and Format .
But When I deploy this BPEL process I am getting the follwing error .
[u]<2007-01-22 11:24:21,164> <DEBUG> <default.collaxa.cube.ws> <FileAdapter::Outbound> PollWork is calling onFatalError for exception Failed to get file modification time.
Could not get file modification time for file :/MySharedFolders/Testpdf_folder\P
LSQL Fundamentals - II.pdf. Verify that the values for the "ModificationTimeFor
mat" activation parameter are correct.Ensure the time format pattern and filenam
e begin index and end index are specified according to the specific FTP server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
Please help me out how to get rid of this problem .
Thanks
Prashant

Hi ,
I have a requiremnt to copy a file from FTP server and put that file into my Local Machine .
For that I have created a BPEL Process .
One Partner Link ( FTP ) - There is a option to "delete the file " . I dont want this option , Because I want to copy the file from FTP server to Local Machine not to move the file .
If I check this " Delete the File " option , instance is sucessfully created and files get moved from FTP server to Local Machine .
My Question is : I want to "copy" the file from FTP Server to Local Machine , so I deselected the option " Delete the file " . After that I set Time Modification and Format .
But When I deploy this BPEL process I am getting the follwing error .
[u]<2007-01-22 11:24:21,164> <DEBUG> <default.collaxa.cube.ws> <FileAdapter::Outbound> PollWork is calling onFatalError for exception Failed to get file modification time.
Could not get file modification time for file :/MySharedFolders/Testpdf_folder\P
LSQL Fundamentals - II.pdf. Verify that the values for the "ModificationTimeFor
mat" activation parameter are correct.Ensure the time format pattern and filenam
e begin index and end index are specified according to the specific FTP server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
Please help me out how to get rid of this problem .
Thanks
Prashant

File FTP to AS400 Library folder

hi mates,
Using the receiver FTP adapter & content conversion, I'm dropping a file on AS400 in a library folder (/QSYS.LIB/XYZ.LIB/). The file is getting created with 'FILE' extension. When I download it on to my desktop and view it with wordpad, I see the actual contents and a line with non-readable character (the char looks line a box).
However, AS400 people say that the file is not usable for their programs. Because ithey run some SQL queries on it and that doesnt return any data and also when they view the content with their toold they see some non-readable characters.
What is the Receiver FTP config for dropping the fille onto a AS400 library?
I've tried using file type, Text with diff encodings given in file adapter help & Binary. It dint help.
Did any one do this kind of thing earlier? Am I missing something here.
I appreciate your inputs & references.
thx
praveen

Hey
yeah,its some encoding problem.anyways, have a look at the following to make sure that you are using the correct encoding for you iSeries
http://publib.boulder.ibm.com/infocenter/iseries/v5r3/index.jsp?topic=/rzaha/fileenc.htm
also try asking the AS400 people which encoding they expect.
i would say,dont do any FCC right now and see if the XML is going properly or not and are they able to read thata XML.if XML goes fine,then use the same encoding and do FCC.
also if you are seeing the special character(the box) in the bottom of the file,then it means that AS400 is behaving funny for new Line('nl').
Use '0x2B' instead of 'nl'
thanx
ahmad
Message was edited by:
Ahmad

IndexOutOfBoundsException with BPEL FTP adapter

I am running SOA Suite 10.1.3.4 on WebLogic Server 9.2, and have deployed a simple test BPEL process that is using the FTP adapter to poll for files on a remote SFTP server, retrieve the opaque payload, then copy it to a destination file on another SFTP server. For small files this works fine. For larger files (e.g., a 3.5MB file with ~25000 fixed-length records) I get the following in my OracleSOAServer.log file:
===========================================
java.lang.IndexOutOfBoundsException
     at java.io.ObjectInputStream.read(ObjectInputStream.java:822)
     at oracle.xml.comp.CXMLStream.ensureReadCapacity(CXMLStream.java:1673)
     at oracle.xml.comp.CXMLStream.readChars(CXMLStream.java:1324)
     at oracle.xml.comp.CXMLStream.readUTF(CXMLStream.java:870)
     at oracle.xml.parser.v2.XMLText.readExternal(XMLText.java:905)
     at oracle.xml.parser.v2.XMLNode.readChildNodes(XMLNode.java:2853)
     at oracle.xml.parser.v2.XMLNode.readChildNodes(XMLNode.java:2843)
     at oracle.xml.parser.v2.XMLDocument.readExternal(XMLDocument.java:3394)
     at com.collaxa.cube.xml.dom.SDOMHelper.loadCompressedNormalDom(SDOMHelper.java:345)
     at com.collaxa.cube.xml.dom.SDOMHelper.load(SDOMHelper.java:135)
     at com.collaxa.cube.xml.dom.DOMUtil.loadDocument(DOMUtil.java:2580)
     at com.collaxa.cube.engine.delivery.DeliveryHelper.loadParts(DeliveryHelper.java:933)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:526)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:342)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean_yt19iq_ELOImpl.handleInvoke(CubeDeliveryBean_yt19iq_ELOImpl.java:931)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:58)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
     at java.lang.Thread.run(Thread.java:595)
<2009-03-06 00:12:12,931> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube delivery": Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-09222
Cannot deserialize DOM element.
Failed to deserialize the DOM element from binary format, the document id c4ee9a6854f6381d:-649649f8:11fda9c39f2:-7fcb. The exception reported is
     at com.collaxa.cube.xml.dom.SDOMHelper.loadCompressedNormalDom(SDOMHelper.java:355)
     at com.collaxa.cube.xml.dom.SDOMHelper.load(SDOMHelper.java:135)
     at com.collaxa.cube.xml.dom.DOMUtil.loadDocument(DOMUtil.java:2580)
     at com.collaxa.cube.engine.delivery.DeliveryHelper.loadParts(DeliveryHelper.java:933)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:526)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:342)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean_yt19iq_ELOImpl.handleInvoke(CubeDeliveryBean_yt19iq_ELOImpl.java:931)
     at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:58)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
     at java.lang.Thread.run(Thread.java:595)
Exception: ORABPEL-09222
Cannot deserialize DOM element.
Failed to deserialize the DOM element from binary format, the document id c4ee9a6854f6381d:-649649f8:11fda9c39f2:-7fcb. The exception reported is
Handled As: com.collaxa.cube.CubeException
ORABPEL-00000
===========================================
This happens immediately after the polling FTP adapter picks up the file. The IndexOutOfBoundsException is particularly troubling...is this error solely a function of memory (no OutOfMemory exception is being thrown), or is some other factor at work here? Any insights are appreciated.
Thanks,
--Gary

Hi Anirudh,
Thanks for the response. To clarify: my BPEL process starts with a Receive activity (with "createInstance" set to "yes"), which is receiving from an FTP Adapter PartnerLink. This PartnerLink is polling for a file on an SFTP server. When this file is present, and is relatively small, the whole BPEL process completes successfully. When it is of a larger size, I get the error described in my original post. The cause of the indexOutOfBoundsException is what I'm trying to determine. Here is the source for my BPEL process:
===================================
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="KFS_CNV_OpaqueFileRouting"
targetNamespace="http://xmlns.oracle.com/KFS_CNV_BPEL_OpaqueFileRouting"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
queryLanguage="http://www.w3.org/TR/1999/REC-xpath-19991116"
expressionLanguage="http://www.w3.org/TR/1999/REC-xpath-19991116"
abstractProcess="no" enableInstanceCompensation="no"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns7="http://xmlns.oracle.com/pcbpel/adapter/ftp/ReceiveInputFile/"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns:client="http://xmlns.oracle.com/KFS_CNV_BPEL_FileRouting"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ns8="http://xmlns.oracle.com/pcbpel/adapter/ftp/WriteOutputFile/">


<partnerLinks>
<partnerLink myRole="GetFile_role" name="ReceiveInputFile"
partnerLinkType="ns7:GetFile_plt"/>
<partnerLink name="WriteOutputFile" partnerRole="PutFile_role"
partnerLinkType="ns8:PutFile_plt"/>
</partnerLinks>
<variables>
<variable name="ReceiveFileContents_GetFile_InputVariable"
messageType="ns7:GetFile_msg"/>
<variable name="FtpHeaderData" messageType="ns3:InboundHeader_msg"/>
<variable name="DestFileHeader" messageType="ns3:OutboundHeader_msg"/>
<variable name="OutboundFileContents" messageType="ns8:PutFile_msg"/>
</variables>

<sequence name="main">
<receive name="ReceiveFileContents" partnerLink="ReceiveInputFile"
portType="ns7:GetFile_ptt" operation="GetFile"
variable="ReceiveFileContents_GetFile_InputVariable"
createInstance="yes" bpelx:headerVariable="FtpHeaderData"/>
<assign name="AssignDestFileHeader">
<copy>
<from variable="FtpHeaderData" part="inboundHeader"
query="/ns3:InboundFTPHeaderType/ns3:fileName"/>
<to variable="DestFileHeader" part="outboundHeader"
query="/ns3:OutboundFTPHeaderType/ns3:fileName"/>
</copy>
</assign>
<assign name="AssignDestFileContents">
<copy>
<from variable="ReceiveFileContents_GetFile_InputVariable" part="opaque"
query="/ns2:opaqueElement"/>
<to variable="OutboundFileContents" part="opaque"
query="/ns2:opaqueElement"/>
</copy>
</assign>
<invoke name="PushFileContents" partnerLink="WriteOutputFile"
portType="ns8:PutFile_ptt" operation="PutFile"
inputVariable="OutboundFileContents"/>
</sequence>
</process>
===================================
Thanks,
--Gary

BPEL FTP Adapter Issue

I am trying to run the tutorials/129.FTPAdapter example.
1) placed my FTP configuration in Oracle_Home\integration\orabpel\system\appserver\oc4j\j2ee\home\a
pplication-deployments\default\FtpAdapter\oc4j-ra.xml file.
2) created the input, output folder is my ftp
3) deployed the FTPDebatching process.
The process started polling the FTP- input directory immediately after deployment.
But when I place the container.txt file in the input folder then its not reading the contents of that file and no exception message is thrown
But when I manually initiate the process by giving some input then its writing the input in to a file in FTP- output directory.
But it should pick up the file from input directory when it is place over there.
polling frequency is 1 minute.
Am I missing some configuration ????????

Did you define in your first activity to create an instance? If you stated in your first activity in your bpel process he needs to create an instance, he will instantiate your process when a file is picked up by the polling mechanism.

BPEL FTP adapter

Hi everyone!
Is there anyone who can tell me where I can find some information about the usage of the FTP adapter included in BPEL PM 10.1.2.
Thanks!

Hi!
By the using of the beta FTP guide I have solved my doubts about the configuration of the adapters for getting and putting files on different FTP server.
But during the execution of the process I have noticed a strange thing in the BPEL server console. It seems to be a âgreatâ delay between the activation of the process after the deploying and the effective transferring of files from server1 to server2. I mean, for example, that if I deploy the process at 9,07AM the first transfer begin at 9,28AM, about twenty minutes after and so on for the other istances.
The situation is that:
The polling frequency is fixed to 60 seconds;
The Minimum file age is fixed to 0 seconds;
The files on server1 have a minimum age of about 2 minutes (and have an extension of type .txt);
The instances are initiated automatically because I have checked the âcreate instanceâ box in the invoke component configuration parameters.
Initially I think that the delay was due to the difference between my pc-time and the server1-time but modifying my pc-time I have obtained only a little improvement.
Could it be due to any activation or scheduling parameter in some BPEL file or it is probably a synchronization problem between my pc and server1?
I bag your pardon if the message is so long but I hope to have success in explaining the problem!
Thanks,
Busno.

BPEL FTP Adapter problems

Hi!
I have two problem using the FTP Adapter in a BPEL process.
The first can be described as follow: I have a BPEL process that incapsulates the FTP Adapter and it is deployed correctly on the BPEL default domain. It's working fine in a normal context with no error. Now I want to simulate a "read FTP Server" crash; so I put the FTP Server from which I'm reading off-line. When the GET module of the FTP Adapter tries to poll the server, it generates a Null Pointer Exception and on the server command window I can read, after a while, that the process state will be set to OFF. But when I enter in the console I always see the state ON! But the interesting question is: is there an automatic way to recovery the process and to restart it? I see that in the domain parameter there are two values: rcvAgentDelay (7200) and rcvThreshold (600). I tried to set them to some other values, for example (120) and (10), but the process still remains "blocked" and no new polling seems to happen.
The second problem is about the creation and the deploying on a new domain. I create a new domain called "bulk" and I tried to deploy my process on it but I can't do it due to the generation of many exception! Can I deploy a process with a FTP Adapter component inside on a domain different from the default one? And if the response is positive, like I think, can you summarize the most important steps of it and if I must configure some specific domain parameters?
Thanks a lot,
Busnelli.

OK, firstly I want to thank both of you, Rakesh and Maneesh.
Here are the details requested:
Operation System = Windows XP Pro SP2
BPEL Process Manager = 10.1.2
BPEL Server version = 2.2 (build 1361)
JDeveloper version = 10.1.2 (build 1811)
BPEL Designer version = 10.1.2 (build 050322)
Usually after any modification I'm used to restarting the BPEL server.
Today I have downloaded the "Oracle JDeveloper 10g (10.1.3) - Developer Preview" (I think to be the Post Beta 3) and as soon as possible I will try to use it.
Thanks to both!

Transfer ftp to new machine

I just bought a new computer. I had all my ftp connections set up in cfbuilder on my old machine. Can I transfer them over to the new computer?
TIA

If you move your workspace (usually found in %USERPROFILE%/Adobe ColdFusion Builder workspace) to the new system all settings should move as well.

FTP adapter on BPEL

I am using Oracle AS 10.1.3.1 on windows. My FTP server is also on Windows. But during invoke of outbound FTP adapter i am getting following error
I am able to do FTP from AS machine to FTP server (Window) through command prompt and it is working fine.
Error message
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>550</code>
</part><part name="summary"><summary>file:/D:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_ProfileProcesTest_1.3_42d6d84ceee8de6430d37dfbfaa14936.tmp/FTP_To_OUT.wsdl Put_ptt::Put(Root-Element) - WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
</summary>
</part><part name="detail"><detail>550 /FTPFolders/CUST_081210184025.txt: The system cannot find the path specified. </detail>
</part></bindingFault>
Defination of FTP Adapter is
<definitions
name="FTP_To_OUT"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/FTP_To_OUT/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/ftp/FTP_To_OUT/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:imp1="http://TargetNamespace.com/Read"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/" location="ftpAdapterOutboundHeader.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" >
<import namespace="http://TargetNamespace.com/Read" schemaLocation="CUST_2007330181610_1.xsd" />
</schema>
</types>
<message name="Root-Element_msg">
<part name="Root-Element" element="imp1:Root-Element"/>
</message>
<portType name="Put_ptt">
<operation name="Put">
<input message="tns:Root-Element_msg"/>
</operation>
</portType>
<binding name="Put_binding" type="tns:Put_ptt">
<jca:binding />
<operation name="Put">
<jca:operation
FileType="binary"
PhysicalDirectory="FTPFolders"
InteractionSpec="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec"
FileNamingConvention="CUST_%yyMMddHHmmss%.txt"
NumberMessages="1"
OpaqueSchema="false" >
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
</operation>
</binding>
<service name="FTP_To_OUT">
<port name="Put_pt" binding="tns:Put_binding">
<jca:address location="eis/Ftp/FtpAdapter" />
</port>
</service>
<plt:partnerLinkType name="Put_plt" >
<plt:role name="Put_role" >
<plt:portType name="tns:Put_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Defination of OC4j-ra.xml is
<?xml version="1.0"?>
<oc4j-connector-factories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/oc4j-connector-factories-10_0.xsd" schema-major-version="10" schema-minor-version="0" >
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
<import-shared-library name="oracle.xml"/>
</imported-shared-libraries>
<connector-factory location="eis/Ftp/FtpAdapter" connector-name="Ftp Adapter">
<config-property name="host" value="10.zzz.yy.xxx"/>
<config-property name="port" value="21"/>
<config-property name="username" value="xxx"/>
<config-property name="password" value="yyy"/>
<config-property name="keepConnections" value="true"/>
<config-property name="serverType" value="win"/>
<config-property name="serverLocaleLanguage" value=""/>
<config-property name="serverLocaleCountry" value=""/>
<config-property name="serverLocaleVariant" value=""/>
<config-property name="serverEncoding" value=""/>
<config-property name="useFtps" value="false"/>
<config-property name="walletLocation" value="C:\wallet\ewallet.p12"/>
<config-property name="walletPassword" value="welcome1"/>
<config-property name="channelMask" value="both"/>
<config-property name="securePort" value="990"/>
<config-property name="keyStoreProviderName" value=""/>
<config-property name="keystoreType" value=""/>
<config-property name="keystoreAlgorithm" value=""/>
<config-property name="enableCipherSuits" value=""/>
<config-property name="proxyHost" value=""/>
<config-property name="proxyPort" value=""/>
<config-property name="proxyUsername" value=""/>
<config-property name="proxyPassword" value=""/>
<config-property name="proxyType" value=""/>
<config-property name="proxyDefinitionFile" value=""/>
<config-property name="useProxy" value="false"/>
<config-property name="useSftp" value="false"/>
<config-property name="authenticationType" value="password"/>
<config-property name="preferredKeyExchangeAlgorithm" value="diffie-hellman-group1-sha1"/>
<config-property name="preferredCompressionAlgorithm" value="none"/>
<config-property name="preferredDataIntegrityAlgorithm" value="hmac-md5"/>
<config-property name="preferredPKIAlgorithm" value="ssh-rsa"/>
<config-property name="privateKeyFile" value=""/>
<config-property name="preferredCipherSuite" value="blowfish-cbc"/>
<config-property name="transportProvider" value="socket"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
</oc4j-connector-factories
Edited by: user6408601 on Dec 10, 2008 6:03 AM

Probably the Windows FTP server chokes on the path "/FTPFolders/CUST_081210184025.txt" as it uses Unix separators. You may need to use "\FTPFolders\CUST_081210184025.txt". I can't see the properties in the XML you have given, but when you configure the FTP adapter in the application server console there should be one field for the separator and one for the root folder. Both should be "\" rather than "/" on Windows. The default is "/".
Good luck!

BPEL - FTP to AS400 machine

Similar Messages

Maybe you are looking for